Deprecate using phy-omap-control driver to power on/off the PHY and
use *syscon* framework to do the same.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
to power off the PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
No functional change. Moved mem resource initialization done in
probe to a separate function as part of cleaning up
ti_pipe3_probe.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
No functional change. Moved sysctrl initialization done in probe to a
separate function as part of cleaning up ti_pipe3_probe.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
No functional change. Moved clock initialization done in probe to a
separate function as part of cleaning up ti_pipe3_probe.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
No functional change. Introduce local struct device pointer in
probe and replace using &pdev->dev/phy->dev with the local
device pointer. This is in preparation to split ti_pipe3_probe
and add separate functions for getting mem resource, getting
sysctrl and getting clocks.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
pan_display_atomic() calls drm_atomic_clean_old_fb() to sanitize the
legacy FB fields (plane->fb and plane->old_fb). However it was building
the plane mask to pass to this function incorrectly (the bitwise OR was
using plane indices rather than plane masks). The end result was that
sometimes the legacy pointers would become out of sync with the atomic
pointers. If another operation tried to re-set the same FB onto the
plane, we might end up with the pointers back in sync, but improper
reference counts, which would eventually lead to system crashes when we
accessed a pointer to a prematurely-destroyed FB.
The cause here was a very subtle bug introduced in commit:
commit 07d3bad6c1
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Nov 11 11:29:11 2015 +0100
drm/core: Fix old_fb handling in pan_display_atomic.
I found the crashes were most easily reproduced (on i915 at least) by
starting X and then VT switching to a VT that wasn't running a console
instance...the sequence of vt/fbcon entries that happen in that case
trigger a reference count mismatch and crash the system.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93313
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Somehow this variable name screwed up in some rebase, fixed it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Pramod Kumar <pramodku@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Blingly ignoring CIE.version != 1 was a bad idea.
It still leaves "desirability" when running perf with callgraphing where libgcc
symbols might show in hotspot.
More importantly, basic CIE.version == 3 support already exists in code:
|
| retAddrReg = state.version <= 1 ? *ptr++ : get_uleb128(&ptr, end);
|
Next commit with simply add continue-not-bail for CIE.version != 1
This reverts commit 323f41f9e7.
At -Os, ARC gcc generates millicode thunk for function prologue/epilogue,
which are served by libgcc.
Modules historically are NOT linked with libgcc to avoid code bloat, reducing
runtime relocation fixups etc. I even once tried doing that but got lost
in makefile intricacies.
This means modules at -Os don't get the millicode thunks, causing build
failures below:
| MODPOST 5 modules
| ERROR: "__ld_r13_to_r18" [crypto/sha256_generic.ko] undefined!
| ERROR: "__ld_r13_to_r18_ret" [crypto/sha256_generic.ko] undefined!
| ERROR: "__st_r13_to_r18" [crypto/sha256_generic.ko] undefined!
| ERROR: "__ld_r13_to_r17_ret" [crypto/sha256_generic.ko] undefined!
| ERROR: "__st_r13_to_r17" [crypto/sha256_generic.ko] undefined!
| ERROR: "__ld_r13_to_r16_ret" [crypto/sha256_generic.ko] undefined!
| ERROR: "__st_r13_to_r16" [crypto/sha256_generic.ko] undefined!
|....
|....
Workaround that by inhibiting millicode thunks for loadable modules
Fixes STAR 9000641864:
("Linux built with optimizations for size emits errors for modules")
Reported-by: Anton Kolesov <akolesov@synosys.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The socfpga.dtsi explicitly enabled MMC support, but not all boards are
equiped with an MMC card. There are setups which only have QSPI NOR.
Therefore, disable the MMC support on socfpga.dtsi level and enable it
on per-board basis.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
ARC700 cores with MMU v2 don't have IC_PTAG AUX register and so we only
define ARC_REG_IC_PTAG for MMU versions >= 3.
But current implementation of cache_line_loop_vX() routines assumes
availability of all of them (v2, v3 and v4) simultaneously.
And given undefined ARC_REG_IC_PTAG if CONFIG_MMU_VER=2 we're seeing
compilation problem:
---------------------------------->8-------------------------------
CC arch/arc/mm/cache.o
arch/arc/mm/cache.c: In function '__cache_line_loop_v3':
arch/arc/mm/cache.c:270:13: error: 'ARC_REG_IC_PTAG' undeclared (first use in this function)
aux_tag = ARC_REG_IC_PTAG;
^
arch/arc/mm/cache.c:270:13: note: each undeclared identifier is reported only once for each function it appears in
scripts/Makefile.build:258: recipe for target 'arch/arc/mm/cache.o' failed
---------------------------------->8-------------------------------
The simples fix is to have ARC_REG_IC_PTAG defined regardless MMU
version being used.
We don't use it in cache_line_loop_v2() anyways so who cares.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| WARNING: vmlinux.o(.text+0xd6c2): Section mismatch in reference from the function alloc_kmap_pgtable() to the function
| .init.text:__alloc_bootmem_low()
The function alloc_kmap_pgtable() references the function __init __alloc_bootmem_low().
This is often because alloc_kmap_pgtable lacks a __init annotation or the annotation of __alloc_bootmem_low is wrong.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Allow using the tcm function as a component of a gadget composed with
ConfigFS.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Do not directly use file static strings definitions in instances of f_tcm.
Instead use usb_gstrings_attach.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The only instance is guaranteed with TPG_INSTANCES defined to 1.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There are no old function interface users left.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Convert the only user of old tcm function interface so that the old
interface can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Converting tcm to the new function interface requires converting
USB tcm's function code and its users.
This patch converts the f_tcm.c to the new function interface.
The file can be now compiled into a separate module usb_f_tcm.ko.
The old function interface is provided by means of preprocessor conditional
directives. After all users are converted, the old interface can be
removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Prepare for converting tcm to new function registration interface.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Simplify function code.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Simplify the function.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Prepare for splitting tcm_usb_gadget into legacy gadget proper and f_tcm.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Prepare for factoring out f_tcm from a legacy gadget.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fix up tcm_usbg_tpg_store_enable() return value to propagate
usbg_attach() failure up to user-space if no HDC is found.
Reported-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds the missing tcm_usbg_drop_nexus() to properly
release tcm_usbg_nexus memory during typical ->fabric_drop_tpg()
callback shutdown.
Reported-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Avoid stripping off the 'naa.' I_T nexus prefix from configfs
attribute store input, so that user-space will get back what
it originaly wrote into ../usb_gadget/$WWPN/$TPGT/nexus.
Note the SCSI initiator WWPN is purely symbolic for UAS + BOT,
so it will not effect host side code.
Reported-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Maxim Integrated MAX3355E chip integrates a charge pump and comparators to
enable a system with an integrated USB OTG dual-role transceiver to
function as an USB OTG dual-role device. In addition to sensing/controlling
Vbus, the chip also passes thru the ID signal from the USB OTG connector.
On some Renesas boards, this signal is just fed into the SoC thru a GPIO
pin -- there's no real OTG controller, only host and gadget USB controllers
sharing the same USB bus; however, we'd like to allow host or gadget
drivers to be loaded depending on the cable type, hence the need for the
MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs
(however, we aren't currently interested in them), the OFFVBUS# signal is
controlled by the host controllers, there's also the SHDN# signal wired to
a GPIO, it should be driven high for the normal operation.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
[cw00.choi: Add the GPIOLIB dependency]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The processor cooling device is no longer present for passive thermal
control.
Commit 239708a3af ("ACPI: Split out ACPI PSS from ACPI Processor driver")
moved the processing to a new function acpi_pss_perf_init(), but
missed "return 0" after successful creation. This causes the error
handling functions to be called, which will delete the previously
created processor cooling device.
Fixes: 239708a3af (ACPI: Split out ACPI PSS from ACPI Processor driver)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.3+ <stable@vger.kernel.org> # 4.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a new runtime PM function, pm_runtime_get_if_in_use(),
that will increment the device's runtime PM usage counter and
return 1 if its status is RPM_ACTIVE and its usage counter
is greater than 0 at the same time (0 will be returned otherwise).
This is useful for things that should only be done if the device
is active (from the runtime PM perspective) and used by somebody
(as indicated by the usage counter) already and they are not worth
bothering otherwise.
Requested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change is necessary for the SCSI target usb gadget composed with
configfs. In this case configfs will be used for two different purposes:
to compose a usb gadget and to configure the target part. If an instance
of tcm function is created in $CONFIGFS_ROOT/usb_gadget/<gadget>/functions
a tpg can be created in $CONFIGFS_ROOT/target/usb_gadget/<wwn>/, but after
a tpg is created the tcm function must not be removed until its
corresponding tpg is gone. While the configfs_depend/undepend_item() are
meant exactly for creating this kind of dependencies, they are not suitable
if the other kernel subsystem happens to be another subsystem in configfs,
so this patch adds unlocked versions meant for configfs callbacks.
Above description has been provided by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com>
In configfs_depend_item() we have to consider two possible cases:
1) When we are called to depend another item in the same subsystem
as caller
In this case we should skip locking configfs root as we know
that configfs is in valid state and our subsystem will not
be unregistered during this call.
2) When we are called to depend item in different subsystem than
our caller
In this case we are also sure that configfs is in valid state
but we have to lock root of configfs to avoid unregistration
of target's subsystem. As it is other than caller's subsystem,
there may be nothing what protects us against unregistration
of that subsystem.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
configfs_depend_item() is quite complicated and should
be split up into smaller functions. This also allow to
share this code with other functions.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
configfs_depend_item() is quite complicated and should
be split up into smaller functions. This also allow to
share this code with other functions.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
subsys parameter is never used by configfs_undepend_item()
so there is no point in passing it to this function.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
As commit 1d33929e2a ("clk: rockchip: switch PLLs to slow mode before
reboot for rk3288") states, switching the PLLs to slow-mode is only
necessary when rebooting using the soft-reset done through the CRU.
The dwc2 controllers used create really big number of interrupts in
special constellations involving usb-hubs and their number is so high,
it can even overwhelm the interrupt handler if the cpu-speed os to low.
Right now the PLLs are put into slow-mode in a shutdown syscore_ops
callback which means it happens on all reboots (not only the soft-reset
ones) and even on poweroff actions.
This can result in the system not powering off and getting stuck instead,
so we should move the slow-mode change nearer to the actual reboot action.
For this we introduce the possiblity to also set a callback that gets
called from the restart-handler directly prior to restarting the system
and move the shutdown-callback to this new option.
With this the slow-mode switch is done only on the necessary reboots
and also has a smaller possibility of causing artifacts.
Fixes: 1d33929e2a ("clk: rockchip: switch PLLs to slow mode before reboot for rk3288")
Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
md currently doesn't allow a 'sync_action' such as 'reshape' to be set
while MD_RECOVERY_NEEDED is set.
This s a problem, particularly since commit 738a273806 as that can
cause ->check_shape to call mddev_resume() which sets
MD_RECOVERY_NEEDED. So by the time we come to start 'reshape' it is
very likely that MD_RECOVERY_NEEDED is still set.
Testing for this flag is not really needed and is in any case very
racy as it can be set at any moment - asynchronously. Any race
between setting a sync_action and setting MD_RECOVERY_NEEDED must
already be handled properly in some locked code, probably
md_check_recovery(), so remove the test here.
The test on MD_RECOVERY_RUNNING is also racy in the 'reshape' case
so we should test it again after getting mddev_lock().
As this fixes a race and a regression which can cause 'reshape' to
fail, it is suitable for -stable kernels since 4.1
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 738a273806 ("md/raid5: fix allocation of 'scribble' array.")
Cc: stable@vger.kernel.org (v4.1+)
Signed-off-by: NeilBrown <neilb@suse.com>
added the rx delay parameter as a device tunable parameter.
Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
There is no need to store struct pci_dev in struct fm801. Generic struct device
can be easily translated to struct pci_dev whenever it's needed, in particular
for one user for now.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The compiler complains on unused condition as follows
sound/pci/fm801.c: In function ‘snd_fm801_interrupt’:
sound/pci/fm801.c:585:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Put the curly braces around empty body as suggested.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch introduces two new helpers fm801_iowrite16() and fm801_ioread16() to
write and read the registers by offset. Previously similar was done to access
the hardware registers by their names.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise we will have a warning on ->remove() since device is a PCI one.
WARNING: CPU: 4 PID: 1411 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x137/0x160()
remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'snd_fm801'
Fixes: 5618955c42 (ALSA: fm801: move to pcim_* and devm_* functions)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
