Modifying the architecture level set facility lists was always very
error prone. Given the numbering of the facility bits within the
Principles of Operation, where the most significant bit number is 0,
it happened a lot of times that wrong bits were set or cleared.
Therefore this patch adds a tool "gen_facilities" which generates
include/generated/facilites.h. The definition of the bits to be set
is contained within arch/s390/include/asm/facilities_src.h and can be
easily extended to e.g. also generate such lists for the KVM module.
The generated file looks like this:
#define FACILITIES_ALS _AC(0xc1006450f0040000,UL)
#define FACILITIES_ALS_DWORDS 1
The facility bits defined in this patch match 1:1 to the current masks
that can be found in head.S.
That is if the tool gets executed with -march=z990 then the generated
masks will equal the masks in head.S for CONFIG_MARCH_Z990.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
head.s contains an stfle instruction which stores it result at the
storage location that is assigned to the stfl instruction.
This is currently no problem, since we only care about one double
word. However if the number of double words in the ALS bitfield grows
the current code is not very stable.
E.g. before issuing the stfle command the memory to which it stores
must be cleared, since the instruction may or may not clear memory
contents where no bits are set.
In order to simplify the code a bit always use the storage location
that we reserved for the stfle result.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that 31 bit support is gone, the assembler always knows about the
stfl instruction. Therefore lets use a readable mnemonic. Also remove
the not needed extable entry for the inline assembly and fix the
output constraint.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
pm_runtime_{use,dont_use}_autosuspend() controls whether the device's
sysfs power/autosuspend_delay_ms file is writeable or returns -EIO on
access to user space. Since
commit 25b181b46e
Author: Imre Deak <imre.deak@intel.com>
Date: Thu Dec 17 13:44:56 2015 +0200
drm/i915: get a permanent RPM reference on platforms w/o RPM support
this sysfs file is writeable also on platforms without RPM support, but
userspace (at least IGT) depends on this file being unchangable to
determine whether the device supports runtime PM at all. So restore the
old behavior.
This gets rid of igt/pm_rpm failures on old platforms without RPM
support, where the test should be skipped.
Testcase: igt/pm_rpm/basic-rte
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450371873-878-1-git-send-email-imre.deak@intel.com
one nft userspace test case fails with
'ct l3proto original ipv4' mismatches 'ct l3proto ipv4'
... because NFTA_CT_DIRECTION attr is missing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The print_insn() function returns strings like "lghi %r1,0". To escape the
'%' character in sprintf() a second '%' is used. For example "lghi %%r1,0"
is converted into "lghi %r1,0".
After print_insn() the output string is passed to printk(). Because format
specifiers like "%r" or "%f" are ignored by printk() this works by chance
most of the time. But for instructions with control registers like
"lctl %c6,%c6,780" this fails because printk() interprets "%c" as
character format specifier.
Fix this problem and escape the '%' characters twice.
For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf()
into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that we have multiplatform support, let the RealView
defconfigs select all the RealView boards so we boot out of
the box like before. This updates both defconfigs.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This allows to redirect bridged packets to local machine:
ether type ip ether daddr set aa:53:08:12:34:56 meta pkttype set unicast
Without 'set unicast', ip stack discards PACKET_OTHERHOST skbs.
It is also useful to add support for a '-m cluster like' nft rule
(where switch floods packets to several nodes, and each cluster node
node processes a subset of packets for load distribution).
Mangling is restricted to HOST/OTHER/BROAD/MULTICAST, i.e. you cannot set
skb->pkt_type to PACKET_KERNEL or change PACKET_LOOPBACK to PACKET_HOST.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This contains multiple trivial cleanups to the realview headers:
- removing the file names from the introductory comment
- removing the uncompress.h header that is unused
- removing the irqs.h header and NR_IRQS logic that is
obsoleted by sparse IRQs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Nothing includes these files any more, so we can simply move them
from arch/arm/mach-realview/include/mach/ to arch/arm/mach-realview.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Two fixes added to make everything compile]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that realview and integrator always select the correct CPU
type themselves based on the core tiles, there is no need to
still have them user-visible in arch/arm/mm/Kconfig. The
ARM925T symbol has been selected by the only user for many
years, so that can be removed along with the realview and
integrator specific ones.
This also solves randconfig build problems on realview.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For consistency with the other platforms, this remove the CPU
selection logic in mm/Kconfig that was only used by integrator,
and adds specific options for each available core tile and core
module, which in turn select the correct CPUs.
This is consistent with the new way that we do it for realview
and all other platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All obstacles are out of the way by now, so we can finally move realview
to multiplatform.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
[Rebased Kconfig, fixed if $(X) to if X in Makefile]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For whatever reason, this patch was not applied verbatim and had all
tabs replaced with spaces. Replace them back by a quick sed.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
This regulator is on a slow i2c bus. Register accesses are very simple,
they all either enable/disable a regulator channel, or select a new
voltage level. Thus, reading registers from the device will always
return what was last written.
Therefore we can save a lot of time when reading registers by using a
regmap_cache. Since the register map is relatively large, but we only
ever access a few of them, we use an RBTREE cache.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is using complex macro to parse DAI connection.
This patch adds new rsnd_parse_connect_common() and replace current
macro to it.
This is prepare for multi channel support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM will use 6 or 8 slots on 1 SSI, and Multi channel will use
6 or 8 slots on few SSI (each SSI uses 2 slots).
Thus, this adds new slot control functions which can be prepare
for Multi channel support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_get_slot_rdai() returns total slots (it returns 6 if total 6
channels) , and rsnd_get_slot_extend() returns extended SSI width
(it returns 8 if total 6 channels). This will be used on SSI multi
channel support too (It will return 2 if total 6 channels with 3 SSI).
But, it is using confusable naming.
This patch changes rsnd_get_slot_rdai() -> rsnd_get_slot(),
rsnd_get_slot_extend() -> rsnd_get_slot_width()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver is using rsnd_get_slot_runtime(), but
it is same as runtime->channels. This patch removes
rsnd_get_slot_runtime()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SSI/SSIU are using rsnd_get_slot_runtime() to check TDM,
but using rsnd_get_slot_extend() is more sane.
This patch fix it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can't output corrent dma name *before* rsnd_mod_init().
It goes to *after* rsnd_mod_init() by this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound driver has rsnd_get_adinr_bit/chan() functions.
It is assuming _bit() returns ADINR :: OTBL,
and _chan() returns ADINR :: CHNUM.
Current _bit() returns both OTBL and CHNUM. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSIU should be controlled after SSI. This patch fix up it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Kconfig currently controlling compilation of this code is:
config FILE_LOCKING
bool "Enable POSIX file locking API" if EXPERT
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering gets bumped to one level earlier when we
use the more appropriate fs_initcall here. However we've made similar
changes before without any fallout and none is expected here either.
Cc: Jeff Layton <jlayton@poochiereds.net>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Before commit 662d971584
("arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}") is was possible to
compile the kernel without vGIC and vTimer support. Commit message says
about possibility to detect vGIC support in runtime, but this has never
been implemented.
This patch introduces runtime check, restoring the lost functionality.
It again allows to use KVM on hardware without vGIC. Interrupt
controller has to be emulated in userspace in this case.
-ENODEV return code from probe function means there's no GIC at all.
-ENXIO happens when, for example, there is GIC node in the device tree,
but it does not specify vGIC resources. Any other error code is still
treated as full stop because it might mean some really serious problems.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the interrupt controller chip operation functions of mbigen chip.
Signed-off-by: Ma Jun <majun258@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.
Signed-off-by: Ma Jun <majun258@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Mbigen means Message Based Interrupt Generator(MBIGEN).
Its a kind of interrupt controller that collects
the interrupts from external devices and generate msi interrupt.
Mbigen is applied to reduce the number of wire connected interrupts.
As the peripherals increasing, the interrupts lines needed is
increasing much, especially on the Arm64 server SOC.
Therefore, the interrupt pin in GIC is not enough to cover so
many peripherals.
Mbigen is designed to fix this problem.
Mbigen chip locates in ITS or outside of ITS.
Mbigen chip hardware structure shows as below:
mbigen chip
|---------------------|-------------------|
mgn_node0 mgn_node1 mgn_node2
| |-------| |-------|------|
dev1 dev1 dev2 dev1 dev3 dev4
Each mbigen chip contains several mbigen nodes.
External devices can connect to mbigen node through wire connecting way.
Because a mbigen node only can support 128 interrupt maximum, depends
on the interrupt lines number of devices, a device can connects to one
more mbigen nodes.
Also, several different devices can connect to a same mbigen node.
When devices triggered interrupt,mbigen chip detects and collects
the interrupts and generates the MBI interrupts by writing the ITS
Translator register.
To simplify mbigen driver,I used a new conception--mbigen device.
Each mbigen device is initialized as a platform device.
Mbigen device presents the parts(register, pin definition etc.) in
mbigen chip corresponding to a peripheral device.
So from software view, the structure likes below
mbigen chip
|---------------------|-----------------|
mbigen device1 mbigen device2 mbigen device3
| | |
dev1 dev2 dev3
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the mbigen msi interrupt controller bindings document.
This patch based on Mark Rutland's patch
https://lkml.org/lkml/2015/7/23/558
Signed-off-by: Ma Jun <majun258@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Commit 25642e1459 ("powerpc/opal-irqchip: Fix double endian
conversion") fixed an endian bug by calling opal_handle_events() in
opal_event_unmask().
However this introduced a deadlock if we find an event is active
during unmasking and call opal_handle_events() again. The bad call
sequence is:
opal_interrupt()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock)
handle_irq_event(desc)
unmask_irq(desc)
-> opal_event_unmask()
-> opal_handle_events()
-> generic_handle_irq()
-> handle_level_irq()
-> raw_spin_lock(&desc->lock) (BOOM)
When generating multiple opal events in quick succession this would lead
to the following stall warnings:
EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065
15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065
(detected by 13, t=2102 jiffies, g=1325, c=1324, q=602)
NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696]
INFO: rcu_sched detected stalls on CPUs/tasks:
12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371
15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371
(detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290)
This patch corrects the problem by queuing the work if an event is
active during unmasking, which is similar to the pre-endian fix
behaviour.
Fixes: 25642e1459 ("powerpc/opal-irqchip: Fix double endian conversion")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is currently a hack in the GIC driver making it possible
to pass the number of GIC instances from the platform-specific
include files and thus override the variable MAX_GIC_NR.
With multiplatform deployments, this will not work as we need
to get rid of the platform-specific include files.
It turns out that this feature is only used by the RealView
platform which has a cascaded GIC. So move the configuration
to Kconfig and bump to 2 instances if we're building for the
RealView. The include file hacks can then be removed.
Tested on the ARM PB11MPCore with its cascaded GIC.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The ARMv8.1 architecture extension allows to choose between 8-bit and
16-bit of VMID, so use this capability for KVM.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_arm.h is included from both C code and assembly code; however some
definitions in this header supplied with U/UL/ULL suffixes which might
confuse assembly once they got evaluated.
We have _AC macro for such cases, so just wrap problem places with it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Since commit a987370 ("arm64: KVM: Fix stage-2 PGD allocation to have
per-page refcounting") there is no reference to S2_PGD_ORDER, so kill it
for the good.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The debug trapping code is pretty heavy on the "inline" attribute,
but most functions are actually referenced in the sysreg tables,
making the inlining imposible.
Removing the useless inline qualifier seems the right thing to do,
having verified that the output code is similar.
Cc: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
David Binderman reported that the exception injection code had a
couple of unused variables lingering around.
Upon examination, it looked like this code could do with an
anticipated spring cleaning, which amounts to deduplicating
the CPSR/SPSR update, and making it look a bit more like
the architecture spec.
The spurious variables are removed in the process.
Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
User visible:
- Generate perf.data files from 'perf stat', to tap into the scripting
capabilities perf has instead of defining a 'perf stat' specific scripting
support to calculate event ratios, etc. Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to not
generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
Jiri's cover letter for this series:
The initial attempt defined its own formula lang and allowed triggering user's
script on the end of the stat command:
http://marc.info/?l=linux-kernel&m=136742146322273&w=2
This patchset abandons the idea of new formula language and rather adds support
to:
- store stat data into perf.data file
- add python support to process stat events
Basically it allows to store stat data into perf.data and post process it with
python scripts in a similar way we do for sampling data.
The stat data are stored in new stat, stat-round, stat-config user events.
stat - stored for each read syscall of the counter
stat round - stored for each interval or end of the command invocation
stat config - stores all the config information needed to process data
so report tool could restore the same output as record
The python script can now define 'stat__<eventname>_<modifier>' functions
to get stat events data and 'stat__interval' to get stat-round data.
See CPI script example in scripts/python/stat-cpi.py.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qwUx
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull new perf tool feature from Arnaldo Carvalho de Melo:
" User visible changes:
- Generate perf.data files from 'perf stat', to tap into the scripting
capabilities perf has instead of defining a 'perf stat' specific scripting
support to calculate event ratios, etc. Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to not
generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
Jiri's cover letter for this series:
The initial attempt defined its own formula lang and allowed triggering user's
script on the end of the stat command:
http://marc.info/?l=linux-kernel&m=136742146322273&w=2
This patchset abandons the idea of new formula language and rather adds support
to:
- store stat data into perf.data file
- add python support to process stat events
Basically it allows to store stat data into perf.data and post process it with
python scripts in a similar way we do for sampling data.
The stat data are stored in new stat, stat-round, stat-config user events.
stat - stored for each read syscall of the counter
stat round - stored for each interval or end of the command invocation
stat config - stores all the config information needed to process data
so report tool could restore the same output as record
The python script can now define 'stat__<eventname>_<modifier>' functions
to get stat events data and 'stat__interval' to get stat-round data.
See CPI script example in scripts/python/stat-cpi.py."
Also a few other changes:
User visible changes:
- Make command line options always available, even when they
depend on some feature being enabled, warning the user about
use of such options (Wang Nan)
- Support --vmlinux in perf record, useful, so far, for eBPF,
where we will set up events that will be used in the record
session (He Kuang)
- Automatically disable collecting branch flags and cycles with
--call-graph lbr. This allows avoiding a bunch of extra MSR
reads in the PMI on Skylake. (Andi Kleen)
Infrastructure changes:
- Dump the stack when a 'perf test -v ' entry segfaults, so far we
would have to run it under gdb with 'set follow-fork-mode child'
set to get a proper backtrace (Arnaldo Carvalho de Melo)
- Initialize the refcnt in 'struct thread' to 1 and fixup its
users accordingly, so that we try to have the same refcount
model accross the perf codebase (Arnaldo Carvalho de Melo)
- More prep work for moving the subcmd infrastructure out of
tools/perf/ and into tools/lib/subcmd/ to be used by other
tools/ living utilities (Josh Poimboeuf)
- Fix 'perf test' hist testcases when kptr_restrict is on (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.
In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().
V2: Only apply this fix to SKL+
Fix compile error when CONFIG_PM_SLEEP isn't defined
[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
by tiwai]
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/soc/mediatek/Kconfig:config MTK_SCPSYS
drivers/soc/mediatek/Kconfig: bool "MediaTek SCPSYS Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The power domains are supplied by regulators. Add support for them so
that the regulators are properly turned on before a domain is powered up
and turned off when a domain is powered down.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable MTK_TIMER for MediaTek plaform, which will be used as
tick broadcast device and schedule clock.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
