Commit graph

575,883 commits

Author SHA1 Message Date
Mark Brown
711e020cae Merge remote-tracking branches 'spi/fix/spidev' and 'spi/fix/xtfpga' into spi-linus 2015-09-22 09:48:41 -07:00
Mark Brown
5132361cd9 Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bcm2835', 'spi/fix/doc', 'spi/fix/mediatek', 'spi/fix/meson', 'spi/fix/mtk' and 'spi/fix/pxa2xx' into spi-linus 2015-09-22 09:48:34 -07:00
Tejun Heo
10265075aa cgroup: make cgroup_update_dfl_csses() migrate all target processes atomically
cgroup_update_dfl_csses() is responsible for migrating processes when
controllers are enabled or disabled on the default hierarchy.  As the
css association changes for all the processes in the affected cgroups,
this involves migrating multiple processes.

Up until now, it was implemented by migrating process-by-process until
the source css_sets are empty; however, this means that if a process
fails to migrate after some succeed before it, the recovery is very
tricky.  This was considered okay as subsystems weren't allowed to
reject process migration on the default hierarchy; unfortunately,
enforcing this policy turned out to be problematic for certain types
of resources - realtime slices for now.

As such, the default hierarchy is gonna allow restricted failures
during migration and to support that this patch makes
cgroup_update_dfl_csses() migrate all target processes atomically
rather than one-by-one.  The preceding patches made subsystems ready
for multi-process migration and factored out taskset operations making
this almost trivial.  All tasks of the target processes are put in the
same taskset and the migration operations are performed once which
either fails or succeeds for all.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2015-09-22 12:46:53 -04:00
Tejun Heo
adaae5dcf8 cgroup: separate out taskset operations from cgroup_migrate()
Currently, cgroup_migreate() implements large part of the migration
logic inline including building the target taskset and actually
migrating them.  This patch separates out the following taskset
operations.

 CGROUP_TASKSET_INIT()		: taskset initializer
 cgroup_taskset_add()		: add a task to a taskset
 cgroup_taskset_migrate()	: migrate a taskset to the destination cgroup

This will be used to implement atomic multi-process migration in
cgroup_update_dfl_csses().  This is pure reorganization which doesn't
introduce any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2015-09-22 12:46:53 -04:00
Tejun Heo
9af2ec45c2 cgroup: reorder cgroup_migrate()'s parameters
cgroup_migrate() has the destination cgroup as the first parameter
while cgroup_task_migrate() has the destination cset as the last.
Another migration function is scheduled to be added which can make the
discrepancy further stand out.  Let's reorder cgroup_migrate()'s
parameters so that the destination cgroup is the last.

This doesn't cause any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2015-09-22 12:46:53 -04:00
Tejun Heo
4530eddb59 cgroup, memcg, cpuset: implement cgroup_taskset_for_each_leader()
It wasn't explicitly documented but, when a process is being migrated,
cpuset and memcg depend on cgroup_taskset_first() returning the
threadgroup leader; however, this approach is somewhat ghetto and
would no longer work for the planned multi-process migration.

This patch introduces explicit cgroup_taskset_for_each_leader() which
iterates over only the threadgroup leaders and replaces
cgroup_taskset_first() usages for accessing the leader with it.

This prepares both memcg and cpuset for multi-process migration.  This
patch also updates the documentation for cgroup_taskset_for_each() to
clarify the iteration rules and removes comments mentioning task
ordering in tasksets.

v2: A previous patch which added threadgroup leader test was dropped.
    Patch updated accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2015-09-22 12:46:53 -04:00
Tejun Heo
3df9ca0a2b cpuset: migrate memory only for threadgroup leaders
If memory_migrate flag is set, cpuset migrates memory according to the
destnation css's nodemask.  The current implementation migrates memory
whenever any thread of a process is migrated making the behavior
somewhat arbitrary.  Let's tie memory operations to the threadgroup
leader so that memory is migrated only when the leader is migrated.

While this is a behavior change, given the inherent fuziness, this
change is not too likely to be noticed and allows us to clearly define
who owns the memory (always the leader) and helps the planned atomic
multi-process migration.

Note that we're currently migrating memory in migration path proper
while holding all the locks.  In the long term, this should be moved
out to an async work item.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2015-09-22 12:46:53 -04:00
John Lin
917536aeb8 ASoC: rt5645: Add jd_invert for Broadwell
Broadwell can not triger the IRQ falling and rising simultaneously,
so it can not detect jack-in and jack-out simultaneously.
We add a flag "jd_invert" to platform data. If this flag is set,
codec IRQ will be set to invert that forces IRQ as pulse when jack-in
and jack-out.

Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-22 09:46:33 -07:00
John Lin
e9159e7577 ASoC: rt5645: Add dmi for Broadwell
Add DMI data for Buddy project.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-22 09:46:32 -07:00
Mark Brown
c44506997c Merge branch 'fix/rt5645' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rt5645 2015-09-22 09:45:46 -07:00
Will Deacon
1c27df1c0a iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA
Stage-2 TLBI by IPA takes a 48-bit address field, as opposed to the
64-bit field used by the VA-based invalidation commands.

This patch re-jigs the SMMUv3 command construction code so that the
address field is correctly masked.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-22 17:36:05 +01:00
Will Deacon
f0c453dbcc iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs
AArch32-capable SMMU implementations have a minimum IAS of 40 bits, so
ensure that is reflected in the stage-2 page table configuration.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-22 17:36:04 +01:00
Robin Murphy
ffcb6d1686 iommu/io-pgtable-arm: Don't use dma_to_phys()
In checking whether DMA addresses differ from physical addresses, using
dma_to_phys() is actually the wrong thing to do, since it may hide any
DMA offset, which is precisely one of the things we are checking for.
Simply casting between the two address types, whilst ugly, is in fact
the appropriate course of action. Further care (and ugliness) is also
necessary in the comparison to avoid truncation if phys_addr_t and
dma_addr_t differ in size.

We can also reject any device with a fixed DMA offset up-front at page
table creation, leaving the allocation-time check for the more subtle
cases like bounce buffering due to an incorrect DMA mask.

Furthermore, we can then fix the hackish KConfig dependency so that
architectures without a dma_to_phys() implementation may still
COMPILE_TEST (or even use!) the code. The true dependency is on the
DMA API, so use the appropriate symbol for that.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: folded in selftest fix from Yong Wu]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-22 17:35:33 +01:00
Richard Fitzgerald
f0e03dbd2d MAINTAINERS: Update website and git repo for Wolfson Microelectronics
Support for Wolfson Microelectronics devices is now part of Cirrus Logic
and the relevant parts of the old opensource.wolfsonmicro.com site have
moved to the Cirrus Logic GitHub area.

This patch updates the website and git repo links, and also removes an
obsolete website link for the voltage and current drivers.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-22 09:33:16 -07:00
Max Filippov
b0b4855099 spi: xtensa-xtfpga: fix register endianness
XTFPGA SPI controller has native endian registers.
Fix register acessors so that they work in big-endian configurations.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-09-22 09:30:10 -07:00
Borislav Petkov
52019e406c EDAC, i5100: Convert to debugfs wrappers
This driver creates its debugfs hierarchy under the toplevel debugfs dir
- see i5100_init() - so make it use edac_debugfs_create_dir_at( , NULL)
because we're not breaking userspace. Oh well.

Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22 18:21:12 +02:00
Borislav Petkov
bba3b31e44 EDAC, altera: Convert to debugfs wrappers
Use the EDAC-specific wrappers. Drop CONFIG_EDAC_DEBUG ifdeffery.

Cc: Thor Thayer <tthayer@opensource.altera.com>
Cc: <linux-edac@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22 18:20:56 +02:00
Borislav Petkov
4397bcb4fa EDAC: Add debugfs wrappers
Later patches will convert EDAC users to those.

Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22 18:10:22 +02:00
Jonathan McDowell
f7a7651fcd tty: serial: Add missing module license for 8250_base.ko
The split of the 8250 driver into a 8250_base/8250.ko resulted in a
lack of a license for the 8250_base.ko module. This caused the module
to fail to load and the kernel to be tainted. Add the appropriate
MODULE_LICENSE to 8250_port.c, which is always compiled into
8250_base.ko

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22 09:09:15 -07:00
Nishanth Menon
1a3284542f ARM: configs: keystone: Add basic systemd related options
Add basic options to bootup on systemd based distros such as debian.
See http://cgit.freedesktop.org/systemd/systemd/tree/README#n38 for
more information.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-09-22 08:56:35 -07:00
Nishanth Menon
45ddd2e372 ARM: configs: keystone: sync to savedefconfig
Sync up the defconfig to savedefconfig output. easier to integrate
deltas as a result.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-09-22 08:56:28 -07:00
Greg Kroah-Hartman
50314035d6 Update extcon for v4.3-rc3
This patches fix the following one issue:
 - Fix bug of the is_extcon_changed() which check whether specific cable is
   attached or detached.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIbBAABAgAGBQJWAQsZAAoJEJzN3yze689T7cQP+PHOzkf+H/0tD0Gb0Hp2kk4j
 tJFJO/dMqLp2o2t7qhliVXHyNMcuDmqzyuUvsV7ylTqUpNQ+7fuLSSgbExk7bUaQ
 TPTpnWZrEu3NpFDmBWMF+sxi6uUp6InXAmIUPm2ctDkkROeLswxfkygTCxfZBfIV
 qWmEo54uEJlGghRajOLZtbQPFb+mEq0M/nNgHKGyq6e1XORsLoOsdORAkH0y4a/h
 xwDvTkG1n6wTbCMqhdWti82JNQEIMUKkqRofSWXmNmhDUz8p66RtxYqIvIDglaqV
 nEW2XWhDkZhV/qM23Z9hlYEdb7OaSdEOm/5+0TA7m9Acjyq5DsVROev28J4WUKqV
 A6ZP6u3xR4qDllhdT/dkGy2GXym9g1EbFFog85wNavtMpfoJsIUukS0sTac+500m
 PJCg65T1vi6SZeYQBqpyDkaqJhmU9FAhCqYdh9XEaxQma4msfoSHPE3SLF5ZIx2T
 ankri7o0XrqGzK5Ewcqr0VQ1c5uQ5mCsArGrBE7T1xLETj07Qg5qvWWvthZGK0v4
 7RVSl4IWSYQeZPxCsblVwU1ccEiFgLmTgZ+wCYpDxwVEbnN1v4Bkft/g8qMfUJy4
 Ik6gk0qsn9G/X6bX0J3oxnw8GP+rzX+nSH1m1gntIsuEm+7QFUfF1ic+PQlqnYUr
 IGRYOsLYcRRTms9C0dI=
 =pCg7
 -----END PGP SIGNATURE-----

Merge tag 'extcon-fixes-for-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus

Chanwoo writes:

Update extcon for v4.3-rc3

This patches fix the following one issue:
- Fix bug of the is_extcon_changed() which check whether specific cable is
  attached or detached.
2015-09-22 08:56:13 -07:00
Alexander Sverdlin
88d3426942 MIPS: bootmem: Fix mapstart calculation for contiguous maps
Commit a6335fa1 fixed the case with gap between initrd and next usable PFN zone,
but broken the case when initrd is combined with usable memory into one region
(in add_memory_region()). Restore the fixup initially brought in by f9a7febd.

---- error message ----
Unpacking initramfs...
Initramfs unpacking failed: junk in compressed archive
BUG: Bad page state in process swapper  pfn:00261
page:81004c20 count:0 mapcount:-127 mapping:  (null) index:0x2
flags: 0x0()
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0+ #1782
-----------------------

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reported-by: Tony Wu <tung7970@gmail.com>
Tested-by: Tony Wu <tung7970@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Joe Perches <joe@perches.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11086/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22 17:25:33 +02:00
Guenter Roeck
fc2ca67447 MIPS: Fix console output for Fulong2e system
Commit 3adeb2566b ("MIPS: Loongson: Improve LEFI firmware interface")
made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured.
Unfortunately, it did not initialize the number of UARTs if
LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e
system has no console.

Fixes: 3adeb2566b ("MIPS: Loongson: Improve LEFI firmware interface")
Acked-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11076/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22 17:25:33 +02:00
Bob Paauwe
adda50b8b3 drm/i915/skl: Don't clear all watermarks when updating. (v2)
Clearing the watermarks for all pipes/planes when updating the
watermarks for a single CRTC change seems like the wrong thing to
do here. As is, this code will ony update any pipe/plane watermarks
that need updating and leave the remaining set to zero.  Later, the
watermark checks in check_wm_state() will flag these zero'd out pipe/plane
watermarks and throw errors.

By clearing only the watermark values associated with the specific crtc
the other watermark values may remain unchanged.

v2: Make sure all the dirty flags are cleared. Damien
    Clear all values assoicated with crtc/pipe being updated.  Damien

Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22 17:10:53 +02:00
Daniel Vetter
25e1793f6c drm/i915: Mark debug mod options as _unsafe
We don't want random people to touch these.

Especially true since we've just screwed up SKL by holding it way too
long under the preliminary flag because of some ABI issues. And now
there's howtos all over the internets about how to set this. Same
pretty much for anything else.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: drop fastboot changes, that option is gone.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22 17:10:53 +02:00
Andrzej Hajda
604ef73468 drm/i915: fix handling gen8_emit_flush_coherentl3_wa result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22 17:10:52 +02:00
Lukas Wunner
5389e916c3 drm/i915: Spell vga_switcheroo consistently
Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.

vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22 17:10:52 +02:00
Kapileshwar Singh
c2e4b24ff8 tools lib traceevent: Fix string handling in heterogeneous arch environments
When a trace recorded on a 32-bit device is processed with a 64-bit
binary, the higher 32-bits of the address need to ignored.

The lack of this results in the output of the 64-bit pointer
value to the trace as the 32-bit address lookup fails in find_printk().

Before:

  burn-1778  [003]   548.600305: bputs:   0xc0046db2s: 2cec5c058d98c

After:

  burn-1778  [003]   548.600305: bputs:   0xc0046db2s: RT throttling activated

The problem occurs in PRINT_FIELD when the field is recognized as a
pointer to a string (of the type const char *)

Heterogeneous architectures cases below can arise and should be handled:

* Traces recorded using 32-bit addresses processed on a 64-bit machine
* Traces recorded using 64-bit addresses processed on a 32-bit machine

Reported-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 11:57:04 -03:00
Rasmus Villemoes
ac742d3718 futex: Force hot variables into a single cache line
futex_hash() references two global variables: the base pointer
futex_queues and the size of the array futex_hashsize. The latter is
marked __read_mostly, while the former is not, so they are likely to
end up very far from each other. This means that futex_hash() is
likely to encounter two cache misses.

We could mark futex_queues as __read_mostly as well, but that doesn't
guarantee they'll end up next to each other (and even if they do, they
may still end up in different cache lines). So put the two variables
in a small singleton struct with sufficient alignment and mark that as
__read_mostly.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/1441834601-13633-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 16:23:15 +02:00
Andrew F. Davis
95b8aff2a6 power: bq27x00_battery: Remove unneeded i2c MODULE_ALIAS
The MODULE_DEVICE_TABLE macro automatically adds all needed
i2c MODULE_ALIASes so remove the extra MODULE_ALIAS.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:20:10 +02:00
Vaishali Thakkar
5e5822f670 power_supply: max8998: Use devm_power_supply_register
Use managed resource function devm_power_supply_register instead
of power_supply_register to simplify the error path by allowing
unregister to happen automatically on error. To be compatible with
the change, replace various gotos by direct returns and remove
unneeded label err.

Also, remove max8998_battery_remove as it is now redundant.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:20:10 +02:00
Huang Shijie
71f64340fc genirq: Remove the second parameter from handle_irq_event_percpu()
Actually, we always use the first irq action of the @desc->action
chain, so remove the second parameter from handle_irq_event_percpu()
which makes the code more tidy.

Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: peterz@infradead.org
Cc: marc.zyngier@arm.com
Link: http://lkml.kernel.org/r/1441160695-19809-1-git-send-email-shijie.huang@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 16:14:55 +02:00
Ludovic Desroches
b55a3bb865 irqchip/atmel-aic5: Simplify base chip selection
Use irq_get_domain_generic_chip() to select the base chip.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicholas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <sasha.levin@oracle.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <alexandre.belloni@free-electrons.com>
Cc: <Wenyou.Yang@atmel.com>
Cc: <jason@lakedaemon.net>
Cc: <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1442843173-2390-3-git-send-email-ludovic.desroches@atmel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 16:04:43 +02:00
Ludovic Desroches
414a431ad6 irqchip/atmel-aic5: Use explicit variable name for the base chip
To avoid errors, use an explicit variable name when accessing the 'base'
generic chip.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicholas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <sasha.levin@oracle.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <alexandre.belloni@free-electrons.com>
Cc: <Wenyou.Yang@atmel.com>
Cc: <jason@lakedaemon.net>
Cc: <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1442843173-2390-2-git-send-email-ludovic.desroches@atmel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 16:04:42 +02:00
Marcel Ziswiler
75ea8ca844 power: charger-manager: comment spelling fixes
By accident I stumbled over a few misspelled words in the
charger-manager header file which this patch fixes. Namely:
- Extcon rather than Exton
- constraint rather than constratint
- existence rather than existance
- difference rather than diffential

While at it also add a missing space before a closing comment star
forward-slash.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:04:30 +02:00
Luis de Bethencourt
c72b7bf82c tps65090-charger: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:03:37 +02:00
Vaishali Thakkar
0df2deeab4 max8903_charger: Convert to using managed resources
Use managed resource functions devm_request_threaded_irq and
devm_power_supply_register to simplify error handling.

To be compatible with the change, various gotos are replaced
with direct returns and unneeded labels are dropped. Also,
remove max8903_remove as it is now redundant.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:02:16 +02:00
Vaishali Thakkar
50bddb99c1 power: max17042_battery: Convert to using managed resources
Use managed resource functions devm_request_threaded_irq and
devm_power_supply_register to simplify error handling.

Also, remove max17042_remove as it is now redundant.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 16:01:34 +02:00
Thomas Gleixner
f94f87ab1a Merge branch 'irq/urgent' into irq/core
Get the urgent bugfix for aic5 as further patches depend on it.
2015-09-22 15:56:46 +02:00
Ludovic Desroches
d32dc9aa10 irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
When masking/unmasking interrupts, mask_cache is updated and used later
for suspend/resume. Unfortunately, it always was the mask_cache
associated with the first irq chip which was updated. So when performing
resume, only irqs 0-31 could be enabled.

Fixes: b1479ebb77 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: <sasha.levin@oracle.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <nicolas.ferre@atmel.com>
Cc: <alexandre.belloni@free-electrons.com>
Cc: <boris.brezillon@free-electrons.com>
Cc: <Wenyou.Yang@atmel.com>
Cc: <jason@lakedaemon.net>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org #3.18
Link: http://lkml.kernel.org/r/1442843173-2390-1-git-send-email-ludovic.desroches@atmel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 15:55:51 +02:00
Jiri Olsa
96d8bf75da perf tools: Add include/err.h into MANIFEST
Otherwise the tarpkg is incomplete (tarpkg tests fails).

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 01ca9fd41d ("tools: Add err.h with ERR_PTR PTR_ERR interface")
Link: http://lkml.kernel.org/r/1442846143-8556-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:47:05 -03:00
Arnaldo Carvalho de Melo
65f041bee7 tools lib bpf: Use FEATURE_USER to allow building in the same dir as perf
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.

By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:

Before, every make invokation would run the feature detection:

  $ make O=/tmp/build/perf -C tools/perf
  make: Entering directory '/home/git/linux/tools/perf'
  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  <SNIP>
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]

    GEN      perf-archive
    GEN      perf-with-kcore

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...                           bpf: [ on  ]
  <SNIP>

After:

  $ make O=/tmp/build/perf -C tools/perf
  make: Entering directory '/home/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  make: Leaving directory '/home/git/linux/tools/perf'
  $

Because we now have two different feature detection state files:

  $ ls -la /tmp/build/perf/FEATURE-DUMP*
  -rw-rw-r--. 1 acme acme 338 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP
  -rw-rw-r--. 1 acme acme  33 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP.libbpf
  $

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-s6ev9wfqy7pvvs58emys2g90@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:47:05 -03:00
Arnaldo Carvalho de Melo
13e96db61c tools build: Allow setting the feature detection user
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.

As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.

v2: Fix comment describing the FEATURE_DUMP filename to make sure where
    it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
    Pointed out by Jiri.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:47:04 -03:00
Arnaldo Carvalho de Melo
20517cd9c5 tools lib bpf: Fix up FEATURE_{TESTS,DISPLAY} usage
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).

Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.

Before:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'
  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ OFF ]
  ...                   libelf-mmap: [ OFF ]
  ...                           bpf: [ on  ]
  <SNIP>

After, with FEATURE_TESTS == FEATURE_DISPLAY:

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...                           bpf: [ on  ]
  <SNIP>

I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...                           bpf: [ on  ]

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:47:01 -03:00
Nicolas Ferre
bc312cbdfa power: reset: at91-reset/trivial: driver applies to SAMA5 family as well
This diver doesn't applies only on SAM9 SoC families but on SAMA5 families
as well.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 15:45:39 +02:00
Arnaldo Carvalho de Melo
6076e2a47c tools build: Fixup feature detection display function name
Cut'n'paste mistake, it should eval the name of the function
defined right next to it, in the next line, fix it.

Before:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...                           bpf: [ on  ]
  <SNIP>

After:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ OFF ]
  ...                   libelf-mmap: [ OFF ]
  ...                           bpf: [ on  ]
  <SNIP>

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 58d4f00ff1 ("perf build: Fix feature_check name clash")
Link: http://lkml.kernel.org/n/tip-dzu1c4sruukgfq5d5b1c4r30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:44:19 -03:00
Dmitry Vyukov
3ed769bdb2 timers: Fix data race in timer_stats_account_timer()
timer_stats_account_timer() reads timer->start_site, then checks it
for NULL and then re-reads it again, while
timer_stats_timer_clear_start_info() can concurrently reset
timer->start_site to NULL. This should not lead to crashes, but can
double number of entries in timer stats as start_site is used during
comparison, the doubled entries will have unuseful NULL start_site.

Read timer->start_site only once in timer_stats_account_timer().

The data race was found with KernelThreadSanitizer (KTSAN).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: andreyknvl@google.com
Cc: glider@google.com
Cc: kcc@google.com
Cc: ktsan@googlegroups.com
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/1442584463-69553-1-git-send-email-dvyukov@google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 15:43:18 +02:00
Sara Sharon
babc305e21 mac80211: reset CQM history upon reconfiguration
The current behavior of notifying CQM events is inconsistent:
Upon first configuration there is a cqm event with the current
status according to threshold configured, regardless of signal
stability.
When there is reconfiguration no event is sent unless there is
a significant change to the signal level according to the new
configuration.

Since the current reconfiguration behavior might cause missing
CQM events in case the current signal did not change but is on
the other side of the new threshold, fix that by resetting the
stored signal level upon reconfiguration.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:22:50 +02:00
Johannes Berg
5359d112dc Revert "mac80211: add pointer for driver use to key"
This reverts commit f9a060f4b2.

No driver has turned up needing this functionality, and I've just
implemented the functionality I wanted this for in a different
way. Thus, remove it again, until somebody shows up with a need
for having it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:28 +02:00