The requeue_pi() operation on RT kernels creates a problem versus the
task::pi_blocked_on state when a waiter is woken early (signal, timeout)
and that early wake up interleaves with the requeue_pi() operation.
When the requeue manages to block the waiter on the rtmutex which is
associated to the second futex, then a concurrent early wakeup of that
waiter faces the problem that it has to acquire the hash bucket spinlock,
which is not an issue on non-RT kernels, but on RT kernels spinlocks are
substituted by 'sleeping' spinlocks based on rtmutex. If the hash bucket
lock is contended then blocking on that spinlock would result in a
impossible situation: blocking on two locks at the same time (the hash
bucket lock and the rtmutex representing the PI futex).
It was considered to make the hash bucket locks raw_spinlocks, but
especially requeue operations with a large amount of waiters can introduce
significant latencies, so that's not an option for RT.
The RT tree carried a solution which (ab)used task::pi_blocked_on to store
the information about an ongoing requeue and an early wakeup which worked,
but required to add checks for these special states all over the place.
The distangling of an early wakeup of a waiter for a requeue_pi() operation
is already looking at quite some different states and the task::pi_blocked_on
magic just expanded that to a hard to understand 'state machine'.
This can be avoided by keeping track of the waiter/requeue state in the
futex_q object itself.
Add a requeue_state field to struct futex_q with the following possible
states:
Q_REQUEUE_PI_NONE
Q_REQUEUE_PI_IGNORE
Q_REQUEUE_PI_IN_PROGRESS
Q_REQUEUE_PI_WAIT
Q_REQUEUE_PI_DONE
Q_REQUEUE_PI_LOCKED
The waiter starts with state = NONE and the following state transitions are
valid:
On the waiter side:
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IGNORE
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT
On the requeue side:
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_INPROGRESS
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_DONE/LOCKED
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_NONE (requeue failed)
Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_DONE/LOCKED
Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_IGNORE (requeue failed)
The requeue side ignores a waiter with state Q_REQUEUE_PI_IGNORE as this
signals that the waiter is already on the way out. It also means that
the waiter is still on the 'wait' futex, i.e. uaddr1.
The waiter side signals early wakeup to the requeue side either through
setting state to Q_REQUEUE_PI_IGNORE or to Q_REQUEUE_PI_WAIT depending
on the current state. In case of Q_REQUEUE_PI_IGNORE it can immediately
proceed to take the hash bucket lock of uaddr1. If it set state to WAIT,
which means the wakeup is interleaving with a requeue in progress it has
to wait for the requeue side to change the state. Either to DONE/LOCKED
or to IGNORE. DONE/LOCKED means the waiter q is now on the uaddr2 futex
and either blocked (DONE) or has acquired it (LOCKED). IGNORE is set by
the requeue side when the requeue attempt failed via deadlock detection
and therefore the waiter's futex_q is still on the uaddr1 futex.
While this is not strictly required on !RT making this unconditional has
the benefit of common code and it also allows the waiter to avoid taking
the hash bucket lock on the way out in certain cases, which reduces
contention.
Add the required helpers required for the state transitions, invoke them at
the right places and restructure the futex_wait_requeue_pi() code to handle
the return from wait (early or not) based on the state machine values.
On !RT enabled kernels the waiter spin waits for the state going from
Q_REQUEUE_PI_WAIT to some other state, on RT enabled kernels this is
handled by rcuwait_wait_event() and the corresponding wake up on the
requeue side.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.693317658@linutronix.de
Move the futex key match out of handle_early_requeue_pi_wakeup() which
allows to simplify that function. The upcoming state machine for
requeue_pi() will make that go away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.638938670@linutronix.de
No point in allocating memory when the input parameters are bogus.
Validate all parameters before proceeding.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.581789253@linutronix.de
The comment about the restriction of the number of waiters to wake for the
REQUEUE_PI case is confusing at best. Rewrite it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.524990421@linutronix.de
No point in taking two more 'requeue_pi' conditionals just to get to the
requeue. Same for the requeue_pi case just the other way round.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.468835790@linutronix.de
The accounting is wrong when either the PI sanity check or the
requeue PI operation fails. Adjust it in the failure path.
Will be simplified in the next step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.416427548@linutronix.de
For requeue PI it's required to establish PI state for the PI futex to
which waiters are requeued. This either acquires the user space futex on
behalf of the top most waiter on the inner 'waitqueue' futex, or attaches to
the PI state of an existing waiter, or creates on attached to the owner of
the futex.
This code can retry in case of failure, but retry can never happen when the
pi state was successfully created. The condition to run this code is:
(task_count - nr_wake) < nr_requeue
which is always true because:
task_count = 0
nr_wake = 1
nr_requeue >= 0
Remove it completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.362730187@linutronix.de
When requeuing to a PI futex, then the requeue code tries to trylock the PI
futex on behalf of the topmost waiter on the inner 'waitqueue' futex. If
that succeeds, then PI state has to be allocated in order to requeue further
waiters to the PI futex.
The comment and the code are confusing, as the PI state allocation uses
lookup_pi_state(), which either attaches to an existing waiter or to the
owner. As the PI futex was just acquired, there cannot be a waiter on the
PI futex because the hash bucket lock is held.
Clarify the comment and use attach_to_pi_owner() directly. As the task on
which behalf the PI futex has been acquired is guaranteed to be alive and
not exiting, this call must succeed. Add a WARN_ON() in case that fails.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.305142462@linutronix.de
The futex key reference mechanism is long gone. Clean up the stale comments
which still mention it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.249178312@linutronix.de
The loop in futex_requeue() has a sanity check for the waiter, which is
missing in futex_proxy_trylock_atomic(). In theory the key2 check is
sufficient, but futexes are cursed so add it for completeness and paranoia
sake.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.193767519@linutronix.de
The inner parts of certain locks (mutex, rwlocks) changed due to a rework for
RT and non RT code. Most users remain unaffected, but those who fiddle around
in the inner parts need to be updated.
Match the struct names to the new layout.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.137982730@linutronix.de
Add the necessary defines, helpers and API functions for replacing struct mutex on
a PREEMPT_RT enabled kernel with an rtmutex based variant.
No functional change when CONFIG_PREEMPT_RT=n
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.081517417@linutronix.de
Add the actual ww_mutex API functions which replace the mutex based variant
on RT enabled kernels.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211305.024057938@linutronix.de
Add a ww acquire context pointer to the waiter and various functions and
add the ww_mutex related invocations to the proper spots in the locking
code, similar to the mutex based variant.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.966139174@linutronix.de
Provide the defines for RT mutex based ww_mutexes and fix up the debug logic
so it's either enabled by DEBUG_MUTEXES or DEBUG_RT_MUTEXES on RT kernels.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.908012566@linutronix.de
RT mutex based ww_mutexes cannot order based on timestamps. They have to
order based on priority. Add the necessary decision logic.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.847536630@linutronix.de
Provide the type defines and the helper inlines for rtmutex based ww_mutexes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.790760545@linutronix.de
Accessing the internal wait_lock of mutex and rtmutex is slightly
different. Provide helper functions for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.734635961@linutronix.de
Some ww_mutex helper functions use pointers for the underlying mutex and
mutex_waiter. The upcoming rtmutex based implementation needs to share
these functions. Add and use defines for the types and replace the direct
types in the affected functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.678720245@linutronix.de
Move the mutex related access from various ww_mutex functions into helper
functions so they can be substituted for rtmutex based ww_mutex later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.622477030@linutronix.de
The upcoming rtmutex based ww_mutex needs a different handling for
enqueueing a waiter. Split it out into a helper function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.566318143@linutronix.de
Split out the waiter iteration functions so they can be substituted for a
rtmutex based ww_mutex later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.509186185@linutronix.de
None of these functions will be on the stack when blocking in
schedule(), hence __sched is not needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.453235952@linutronix.de
Split the W/W mutex helper functions out into a separate header file, so
they can be shared with a rtmutex based variant later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.396893399@linutronix.de
Split the ww related part out into a helper function so it can be reused
for a rtmutex based ww_mutex implementation.
[ mingo: Fixed bisection failure. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.340166556@linutronix.de
The wait_lock of mutex is really a low level lock. Convert it to a
raw_spinlock like the wait_lock of rtmutex.
[ mingo: backmerged the test_lockup.c build fix by bigeasy. ]
Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.166863404@linutronix.de
As follow-up to the discussion with Jakub Kicinski about iavf locking
being insufficient [1] convert iavf to use mutexes instead of bitops.
The locking logic is kept as is, just a drop-in replacement of
enum iavf_critical_section_t with separate mutexes.
The only difference is that the mutexes will be destroyed before the
module is unloaded.
[1] https://lwn.net/ml/netdev/20210316150210.00007249%40intel.com/
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ebu_nand_probe() did not invoke ebu_dma_cleanup() and
clk_disable_unprepare() on some error handling paths. The patch fixes
that.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 0b1039f016 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210817092930.23040-1-novikov@ispras.ru
Since 2431c4f5b4 ("mtd: Implement mtd_{read,write}() as wrappers
around mtd_{read,write}_oob()") don't allow _write|_read and
_write_oob|_read_oob existing at the same time, we should check the
existence of callbacks "_read and _write" from subdev's master device
(We can trust master device since it has been registered) before
assigning, otherwise following warning occurs while making
concatenated device:
WARNING: CPU: 2 PID: 6728 at drivers/mtd/mtdcore.c:595
add_mtd_device+0x7f/0x7b0
Fixes: 2431c4f5b4 ("mtd: Implement mtd_{read,write}() around ...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210817114857.2784825-3-chengzhihao1@huawei.com
Since commit 46b5889cc2c5("mtd: implement proper partition handling")
applied, mtd partition device won't hold some callback functions, such
as _block_isbad, _block_markbad, etc. Besides, function mtd_block_isbad()
will get mtd device's master mtd device, then invokes master mtd device's
callback function. So, following process may result mtd_block_isbad()
always return 0, even though mtd device has bad blocks:
1. Split a mtd device into 3 partitions: PA, PB, PC
[ Each mtd partition device won't has callback function _block_isbad(). ]
2. Concatenate PA and PB as a new mtd device PN
[ mtd_concat_create() finds out each subdev has no callback function
_block_isbad(), so PN won't be assigned callback function
concat_block_isbad(). ]
Then, mtd_block_isbad() checks "!master->_block_isbad" is true, will
always return 0.
Reproducer:
// reproduce.c
static int __init init_diy_module(void)
{
struct mtd_info *mtd[2];
struct mtd_info *mtd_combine = NULL;
mtd[0] = get_mtd_device_nm("NAND simulator partition 0");
if (!mtd[0]) {
pr_err("cannot find mtd1\n");
return -EINVAL;
}
mtd[1] = get_mtd_device_nm("NAND simulator partition 1");
if (!mtd[1]) {
pr_err("cannot find mtd2\n");
return -EINVAL;
}
put_mtd_device(mtd[0]);
put_mtd_device(mtd[1]);
mtd_combine = mtd_concat_create(mtd, 2, "Combine mtd");
if (mtd_combine == NULL) {
pr_err("combine failed\n");
return -EINVAL;
}
mtd_device_register(mtd_combine, NULL, 0);
pr_info("Combine success\n");
return 0;
}
1. ID="0x20,0xac,0x00,0x15"
2. modprobe nandsim id_bytes=$ID parts=50,100 badblocks=100
3. insmod reproduce.ko
4. flash_erase /dev/mtd3 0 0
libmtd: error!: MEMERASE64 ioctl failed for eraseblock 100 (mtd3)
error 5 (Input/output error)
// Should be "flash_erase: Skipping bad block at 00c80000"
Fixes: 46b5889cc2 ("mtd: implement proper partition handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210817114857.2784825-2-chengzhihao1@huawei.com
Commit 1b00767fd8 ("MIPS: Remove PMC MSP71xx platform") removes the
config PMC_MSP in ./arch/mips/Kconfig.
Hence, since then, the corresponding MTD map driver for PMC-Sierra MSP
boards is dead code. Remove this dead driver.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210817104531.12675-1-lukas.bulwahn@gmail.com
del_mtd_blktrans_dev() will kfree part, so after this call both part and
dev point to freed memory. Move the call to avoid use-after-free.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210807214538.14484-5-sean@mess.org
I proposed this change 16 years ago before discard was a feature in
the block layer: https://lwn.net/Articles/162776/
Now that the block layer has discard, we can finally merge this change.
Discard is also known as trim. By implementing discard, both fstrim and
the discard filesystem option can be used.
Implementing discard in the ftl means that when files are removed, there
is less data in the ftl mapping. This means less stuff to move around for
erasing and also less erasing to do; this means improved wear levelling
and improved performance.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210807214538.14484-3-sean@mess.org
This allows the rfd_ftl to be used with the mtdram module, so we can
test different mtd sizes and test the rfd_ftl on machines without a
physical nor flash device.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210807214538.14484-2-sean@mess.org
There is a surprisingly large number of tutorials
that suggest using mtdblock to mount SquashFS filesystems
on flash devices, including NAND devices.
This approach is suboptimal than using UBI. If the flash device
is NAND, this is specially true, due to wear leveling, bit-flips and
badblocks. In this case UBI is strongly preferred, so be nice to users
and print a warning suggesting to consider UBI block, if mtdblock
is added for a NAND device.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210801234509.18774-8-ezequiel@collabora.com
Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.
Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:
pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]
Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.
To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25 ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Move the ww_mutex definitions into the ww_mutex specific header where they
belong.
Preparatory change to allow compiling ww_mutexes standalone.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.110216293@linutronix.de
Move the mutex waiter declaration from the public <linux/mutex.h> header
to the internal kernel/locking/mutex.h header.
There is no reason to expose it outside of the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211304.054325923@linutronix.de
Having two header files which contain just the non-debug and debug variants
is mostly waste of disc space and has no real value. Stick the debug
variants into the common mutex.h file as counterpart to the stubs for the
non-debug case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.995350521@linutronix.de
Ensure all !RT tasks have the same prio such that they end up in FIFO
order and aren't split up according to nice level.
The reason why nice levels were taken into account so far is historical. In
the early days of the rtmutex code it was done to give the PI boosting and
deboosting a larger coverage.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.938676930@linutronix.de
Similar to rw_semaphores, on RT the rwlock substitution is not writer fair,
because it's not feasible to have a writer inherit its priority to
multiple readers. Readers blocked on a writer follow the normal rules of
priority inheritance. Like RT spinlocks, RT rwlocks are state preserving
across the slow lock operations (contended case).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.882793524@linutronix.de
Provide the actual locking functions which make use of the general and
spinlock specific rtmutex code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.826621464@linutronix.de
This should use the network-namespace-wide client_lock, not the
per-client cl_lock.
You shouldn't see any bugs unless you're actually using the
forced-expiry interface introduced by 89c905becc.
Fixes: 89c905becc "nfsd: allow forced expiration of NFSv4 clients"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The failure case here should be rare, but it's obviously wrong.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nsm_use_hostnames is a module parameter and it will be exported to sysctl
procfs. This is to let user sometimes change it from userspace. But the
minimal unit for sysctl procfs read/write it sizeof(int).
In big endian system, the converting from/to bool to/from int will cause
error for proc items.
This patch use a new proc_handler proc_dobool to fix it.
Signed-off-by: Jia He <hejianet@gmail.com>
Reviewed-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
[thuth: Fix typo in commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This is to let bool variable could be correctly displayed in
big/little endian sysctl procfs. sizeof(bool) is arch dependent,
proc_dobool should work in all arches.
Suggested-by: Pan Xinhui <xinhui@linux.vnet.ibm.com>
Signed-off-by: Jia He <hejianet@gmail.com>
[thuth: rebased the patch to the current kernel version]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
