Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
v3:
* return error if (ret < 0) (Geert)
* remove duplicate error message (Geert)
v2:
* handle errors in platform_get_irq() (Geert, Sergei)
* store IRQ number in struct shmob_drm_device (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720080941.23646-1-tzimmermann@suse.de
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Avoid configure backpressure for LBK links as they
don't support it and enable lmacs before configuration
pause frames.
Fixes: 75f3627099 ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the existing code while changing the number of TX/RX
queues using ethtool the PF/VF interface resources are
freed and reallocated (otx2_stop and otx2_open is called)
if the device is in running state. If any resource allocation
fails in otx2_open, driver free already allocated resources
and return. But again, when the number of queues changes
as the device state still running oxt2_stop is called.
In which we try to free already freed resources leading
to driver crash.
This patch fixes the issue by setting the INTF_DOWN flag on
error and free the resources in otx2_stop only if the flag is
not set.
Fixes: 50fe6c02e5 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PKINDs are not assigned to LBK channels.
The default value of LBK_CHX_PKIND (channel to PKIND mapping) register
is zero, which is resulting in a overlap of pkind between LBK and CGX
LMACs. When KPU1 parser config is modified when PTP timestamping is
enabled on the CGX LMAC interface it is impacting traffic on LBK
interfaces as well.
This patch fixes the issue by reserving the PKIND#0 for LBK devices.
CGX mapped PF pkind starts from 1 and also fixes the max pkind available.
Fixes: 421572175b ("octeontx2-af: Support to enable/disable HW timestamping")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski says:
====================
nfc: constify data structures
Constify pointers to several data structures which are not modified by
NFC core or by drivers to make it slightly safer. No functional impact
expected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_digital_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_llc_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_hci_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_hci_gate, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_vendor_cmd, so make it a pointer to const for correctness and
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver only reads len_seq and wait_tab variables.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nfc_phy_ops (consisting of function pointers), so make it a pointer
to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither the core nor the drivers modify the passed pointer to struct
nci_driver_ops (consisting of function pointers), so make it a pointer
to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s3fwrn5 driver modifies static struct nci_ops only to set prop_ops.
Since prop_ops is build time constant with known size, it can be made
const. This allows to removeo the function setting the prop_ops -
s3fwrn5_nci_get_prop_ops().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct nci_ops is modified by NFC core in only one case:
nci_allocate_device() receives too many proprietary commands (prop_ops)
to configure. This is a build time known constrain, so a graceful
handling of such case is not necessary.
Instead, fail the nci_allocate_device() and add BUILD_BUG_ON() to places
which set these.
This allows to constify the struct nci_ops (consisting of function
pointers) for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nci_send_cmd() payload argument is passed directly to skb_put_data()
which already accepts a pointer to const, so make it const as well for
correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
-----BEGIN PGP SIGNATURE-----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=Ngut
-----END PGP SIGNATURE-----
Merge tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
MT8173 aal has gamma function but mt8183 aal has no gamma
function, so separate aal sub driver to have a private
data for different SoC.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
* A fix to properly set the memory size, which fixes 32-bit systems.
* A fix to allow the initrd to load anywhere in memory, rather that
restricting it to the first 256MiB.
* A fix for the mem= parameter on 64-bit systems, to properly account
for the maximum supported memory now that the kernel is outside the
linear map.
* A fix to avoid installing mappings into the last 4KiB of memory, which
conflicts with error values.
* A fix to avoid the stack from being freed while it is being walked.
* A handful of fixes to the new copy to/from user routines.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmD8eXcTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiaMuEADHGjJFSzFkPXAj1ROZ7gmbVkife7u3
3wouD25dUQ92a9Smo5D/RthmqoZna7vOjxdtPGdhL3+LvFkB//tkZRRIOYxteJRp
8+RI9wChkx3OeeJ1bMG6/1vS/Rf7eWmqjxSIYyKdmy4TnTb1kj4/XtHxkANzoCTK
1wG9T3diKae5PORvZEz+FVd2I0/1sIWnsVtageBHHBuLrAktOHywRqJ+2Wif5ilT
5SJPn2TPKxBI9XFDdlN8IsehSgF6+bb9R/vuOZn4Zl15zXy8NrD+LcNk06u07+If
gzJ6eJ4jCeiEau1L2wyVdFh0r+mt3vQcJkbqb7XdoCfDRqYbsCaFTNUKy1PjYCh5
UsgSWwyEVNiCDvv7na0n2Ptcki6icnDkKwvYhyzBhga0mYs1/GAleicKvtQ4uiVA
ymz4N3Dk/UObtI7qeTlUKC2hfsWwvM/L61BXS+AleVryI9AKarwerMezsaFP3eNm
q+IFsPOQFEaJdG1IX5G1Y7gHf2RWhQXJz/7zxEUg+VKOhYrX826E96Kp7UYKgQD8
hB8D5XZFTaNY8CsA3q7TI/WUuv4GyQeEEaI3YWPppWkpqfoUzPFy26GjhEdFecuU
oCIjgraXKltN1fLDGqQEspLQwxJ3+4YLAKVMg3ggPk/lcMokLZgmj7i2GbjMwVXj
VbZAfWhBhsfMXQ==
=gyPr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
Commit 71f6428332 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An FPGA manager should not be required to provide a
write_sg function. Move the op check to the wrapper.
Default to -EOPNOTSUP so its users will fail
gracefully.
[mdf@kernel.org: Reworded first line]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager is not required to provide a fpga_remove() op.
Add a wrapper consistent with the other op wrappers.
Move op check to wrapper.
[mdf@kernel.org: Reworded first line]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager should not be required to provide a state() op.
Add a wrapper consistent with the other op wrappers.
Move op check to wrapper.
Default to FPGA_MGR_STATE_UNKNOWN, what noop state() ops use.
Remove unneeded noop state() ops
[mdf@kernel.org: Reworded first line]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager is not required to provide a status() op.
Add a wrapper consistent with the other op wrappers.
Move the op check to the wrapper.
Default to 0, no errors to report.
[mdf@kernel.org: Reworded first line]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager should not be required to provide a
write function. Move the op check to the wrapper.
Default to -EOPNOTSUP so its users will fail
gracefully.
[mdf@kernel.org: Reworded message]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager should not be required to provide a
write_complete function if there is nothing. Move
the op check to the existing wrapper.
Default to success and remove noop function.
[mdf@kernel.org: Reworded message]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
An FPGA manager should not be required to provide a
write_init() op if there is nothing for it do.
So add a wrapper and move the op checking.
Default to success.
[mdf@kernel.org: Reworded first line]
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
warning: ‘zynqmp_fpga_of_match’ defined but not used
[-Wunused-const-variable=]
static const struct of_device_id zynqmp_fpga_of_match[] = {
Fixes: c09f747112 ("fpga manager: Adding FPGA Manager support for Xilinx zynqmp")
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
warning: ‘xlnx_pr_decoupler_of_match’ defined but not used
[-Wunused-const-variable=]
static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
Fixes: 7e961c12be ("fpga: Add support for Xilinx LogiCORE PR Decoupler")
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
warning: ‘xlnx_spi_of_match’ defined but not used
[-Wunused-const-variable]
static const struct of_device_id xlnx_spi_of_match[] = {
Fixes: 061c97d13f ("fpga manager: Add Xilinx slave serial SPI driver")
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
This adds the approved PCI Express Device IDs for the Silicom PAC N5010
and N5011 cards (aka. Silicom Lightning Creek cards).
The N5010 features an FPGA that manages/interfaces four QSFP ports, and
allows on-board custom packet processing/filtering/routing, based on
logic loaded with user-provided FPGA bitstreams.
The N5011 cards adds a PCIe switch that exposes, in addition to the FPGA
itself, two Intel E810 (aka Columbiaville) ethernet controllers. With
this, packets can be forwarded from the FPGA to the host for further
processing.
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Switchdev support can be disabled at compile time, and in that case,
struct sk_buff will not contain the offload_fwd_mark field.
To make the code in br_forward.c work in both cases, we do what is done
in other places and we create a helper function, with an empty shim
definition, that is implemented by the br_switchdev.o translation module.
This is always compiled if and only if CONFIG_NET_SWITCHDEV is y or m.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 472111920f ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYPxK+iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaTeAP99TVNt
QDcY97BEpdnbfiNk12oQzmb+DXMJIky8c4QPQgD9H6y9npruZ6QA0WVyJ3NHgLJC
y3MClDGcN3OAtNAu2K0=
=/VG3
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
-----BEGIN PGP SIGNATURE-----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=uzwV
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
We use the timecounter APIs for the 48-bit PHC and packet timestamps.
We must periodically update the timecounter at roughly half the
overflow interval. The overflow interval is about 78 hours, so
update it every 19 hours (1/4 interval) for some extra margins.
Fixes: 390862f45c ("bnxt_en: Get the full 48-bit hardware timestamp periodically")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One skb's skb_shinfo frags are not writable, and they can be shared with
other skbs' like by pskb_copy(). To write the frags may cause other skb's
data crash.
So before doing en/decryption, skb_cow_data() should always be called for
a cloned or nonlinear skb if req dst is using the same sg as req src.
While at it, the likely branch can be removed, as it will be covered
by skb_cow_data().
Note that esp_input() has the same issue, and I will fix it in another
patch. tipc_aead_encrypt() doesn't have this issue, as it only processes
linear data in the unlikely branch.
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmD8R64THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqe1AB/98IN2SRTPZNaCAapbnvo9gwkVC1u6d
c8xPRdiBycqn1ATdlvbg8SUCXMm3MkC8Wgz7PcVM8rHtaXsYuO7hDQo7Q8NaF9Zu
DU09/i68SG4hKD/USWpfRSvlEyj5Md5FsVB2jO3gWZXlk6rx2hXv/h8xQyrdnSV7
UmwjofOsieViG17NbHAPhKwCBmLlTZWOK1WupLWOKK2A056vgVaQ6BndIwG+qPSl
4gsQprC2+mPdHgIs5t7mQOwIyNaUxCcFTSxEoCG0vIPMBB/hogLN77biYlkBJ+t1
3/vBuBeIpoxx++9vL1BNQnrXp98DGuxkQOe0SpSKLH7h3dNVa+NKUCN4
=3C9h
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.14-20210724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
linux-can-fixes-for-5.14-20210724
Marc Kleine-Budde says:
====================
pull-request: can 2021-07-24
this is a pull request of 6 patches for net/master.
The first patch is by Joakim Zhang targets the imx8mp device tree. It
removes the imx6 fallback from the flexcan binding, as the imx6 is not
compatible with the imx8mp.
Ziyang Xuan contributes a patch to fix a use-after-free in the CAN
raw's raw_setsockopt().
The next two patches target the CAN J1939 protocol. The first one is
by Oleksij Rempel and clarifies the lifetime of session object in
j1939_session_deactivate(). Zhang Changzhong's patch fixes the timeout
value between consecutive TP.DT.
Stephane Grosjean contributes a patch for the peak_usb driver to fix
reading of the rxerr/txerr values.
The last patch is by me for the mcp251xfd driver. It stops the
timestamp worker in case of a fatal error in the IRQ handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The datasheets have the following note for the conversion time
specification: "This parameter is specified by design and/or
characterization and it is not tested in production."
Parts have been seen that require more time to do 14-bit conversions for
the relative humidity channel. The result is ENXIO due to the address
phase of a transfer not getting an ACK.
Delay an additional 1 ms per conversion to allow for additional margin.
Fixes: 4839367d99 ("iio: humidity: add HDC100x support")
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210614141820.2034827-1-chris.lesiak@licor.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In case an error occurred in the IRQ handler, the chip status is
dumped via devcoredump and all IRQs are disabled, but the chip stays
powered for further analysis.
The chip is in an undefined state and will not receive any CAN frames,
so shut down the timestamping worker, which reads the TBC register
regularly, too. This avoids any CRC read error messages if there is a
communication problem with the chip.
Fixes: efd8d98dfb ("can: mcp251xfd: add HW timestamp infrastructure")
Link: https://lore.kernel.org/r/20210724155131.471303-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes an incorrect way of reading error counters in messages
received for this purpose from the PCAN-USB interface. These messages
inform about the increase or decrease of the error counters, whose values
are placed in bytes 1 and 2 of the message data (not 0 and 1).
Fixes: ea8b33bde7 ("can: pcan_usb: add support of rxerr/txerr counters")
Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>