We are about to remove the request pointer from struct scsi_cmnd and that
will complicate getting to the ref_tag via t10_pi_ref_tag() in the various
drivers. Introduce a helper function to retrieve the reference tag so
drivers will not have to worry about the details.
Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-2-martin.petersen@oracle.com>
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
-----BEGIN PGP SIGNATURE-----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=x8Eo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
When receiving a packet with multiple fragments, hardware may still
touch the first fragment until the entire packet has been received. The
driver therefore keeps the first fragment mapped for DMA until end of
packet has been asserted, and delays its dma_sync call until then.
The driver tries to fit multiple receive buffers on one page. When using
3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned
off/build_skb is being used) on an architecture with 4K pages, the
driver allocates an order 1 compound page and uses one page per receive
buffer. To determine the correct offset for a delayed DMA sync of the
first fragment of a multi-fragment packet, the driver then cannot just
use PAGE_MASK on the DMA address but has to construct a mask based on
the actual size of the backing page.
Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration
will always sync the first page of a compound page. With the SWIOTLB
enabled this can lead to corrupted packets (zeroed out first fragment,
re-used garbage from another packet) and various consequences, such as
slow/stalling data transfers and connection resets. For example, testing
on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled
(e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle
out without this patch.
Cc: stable@vger.kernel.org
Fixes: 0c5661ecc5 ("ixgbe: fix crash in build_skb Rx code path")
Signed-off-by: Markus Boehme <markubo@amazon.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-07-20
This series contains updates to e1000e and igc drivers.
Sasha adds initial S0ix support for devices with CSME and adds polling
for exiting of DPG. He sets the PHY to low power idle when in S0ix. He
also adds support for new device IDs for and adds a space to debug
messaging to help with readability for e1000e.
For igc, he ensures that q_vector array is not accessed beyond its
bounds and removes unneeded PHY related checks.
Tree Davies corrects a spelling mistake in e1000e.
Muhammad corrects the value written when there is no TSN offloading
and adjusts timeout value to avoid possible Tx hang for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changs interrupt order which found by dtbs_check.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected
arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected
According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we
should list interrupt in it's order.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to automate the verification of DT nodes covert imx-dwmac to
nxp,dwmac-imx.yaml, and pass below checking.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing DWMAC IP version in snps,dwmac.yaml which found by below
command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml:
ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when we do the HW state readout, we dont set the shared dpll to NULL
for the bigjoiner slave which should not have a DPLL assigned. So it has
some garbage while the HW state readout is NULL. So explicitly reset
the shared dpll for bigjoiner slave pipe.
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/3465
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714223414.9849-1-manasi.d.navare@intel.com
The V3D engine has several hardware performance counters that can of
interest for userspace performance analysis tools.
This exposes new ioctls to create and destroy performance monitor
objects, as well as to query the counter values.
Each created performance monitor object has an ID that can be attached
to CL/CSD submissions, so the driver enables the requested counters when
the job is submitted, and updates the performance monitor values when
the job is done.
It is up to the user to ensure all the jobs have been finished before
getting the performance monitor values. It is also up to the user to
properly synchronize BCL jobs when submitting jobs with different
performance monitors attached.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
Implements changes around PSR for alderlake-P:
- EDP_SU_TRACK_ENABLE was removed and bit 30 now has other function
- Some bits of PSR2_MAN_TRK_CTL moved and SF_PARTIAL_FRAME_UPDATE was
removed setting SU_REGION_START/END_ADDR will do this job
- SU_REGION_START/END_ADDR have now line granularity but will need to
be aligned with DSC when the PSRS + DSC support lands
BSpec: 50422
BSpec: 50424
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625235600.765677-1-jose.souza@intel.com
As the cycle time is set to maximum of 1s, the TX Hang timeout need to
be increase to avoid possible TX Hang.
There is no dedicated number specific in data sheet for the timeout factor.
Timeout factor was determined during the debugging to solve the "Tx Hang"
issues that happen in some cases mainly during ETF(Earliest TxTime First).
This can be test by using TSN Schedule Tx Tools udp_tai sample application.
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
According to datasheet section 8.12.19, when there's no TSN offloading
Shadow_QbvCycle bit[29:0] must be set to zero for basic scheduling.
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i225 devices have only one phy->type: copper. There is no point checking
phy->type during the igc_has_link method from the watchdog that
invoked every 2 seconds.
This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i225 devices have only one PHY vendor. There is no point checking
_I_PHY_ID during the link establishment and auto-negotiation process.
This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.
Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is a spelling mistake in the comment block.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Minor fixes to allow debug prints more readable.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add devices IDs for the next LOM generations that will be
available on the next Intel Client platforms
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add devices IDs for the next LOM generations that will be
available on the next Intel Client platform (Lunar Lake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After transferring the MAC-PHY interface to the SMBus set the PHY
to S0ix low power idle mode.
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Per guidance from the CSME architecture team, it may take
up to 1 second for unconfiguring dynamic power gating mode.
Practically it can take more time. Wait up to 2.5 seconds to indicate
dynamic power gating exit from the S0ix configuration. Detect
scenarios that take more than 1 second but less than 2.5 seconds
will emit warning message.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On the corporate system, the driver will ask from the CSME
(manageability engine) to perform device settings are required
to allow S0ix residency.
This patch provides initial support.
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The recent change for the devres introduced the wrong code shuffling
in the korg1212 firmware loader function that may lead to a bad
pointer access. Restore the calls in the right order (and put back
the release_firmware() call in the error path, too).
Fixes: b5cde369b6 ("ALSA: korg1212: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5heebsoc26.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring missed the initialization of the chip
variable as its allocation was moved to card->private_data.
Let's fix it.
Fixes: 21a9314cf9 ("ALSA: als300: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5hh7goocid.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The chip variable was forgotten to be initialized properly while
changing the object creation from the own malloc to
card->private_data. This patch fixes it.
Fixes: 99041fea70 ("ALSA: cs4281: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5him14ocjz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_ZERO_CALL_USED_REGS is enabled, build the kernel with
"-fzero-call-used-regs=used-gpr" (in GCC 11). This option will zero any
caller-used register contents just before returning from a function,
ensuring that temporary values are not leaked beyond the function
boundary. This means that register contents are less likely to be
available for side channel attacks and information exposures.
Additionally this helps reduce the number of useful ROP gadgets in the
kernel image by about 20%:
$ ROPgadget.py --nosys --nojop --binary vmlinux.stock | tail -n1
Unique gadgets found: 337245
$ ROPgadget.py --nosys --nojop --binary vmlinux.zero-call-regs | tail -n1
Unique gadgets found: 267175
and more notably removes simple "write-what-where" gadgets:
$ ROPgadget.py --ropchain --binary vmlinux.stock | sed -n '/Step 1/,/Step 2/p'
- Step 1 -- Write-what-where gadgets
[+] Gadget found: 0xffffffff8102d76c mov qword ptr [rsi], rdx ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff8104d7c8 pop rdx ; ret
[-] Can't find the 'xor rdx, rdx' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff814c2b4c mov qword ptr [rsi], rdi ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81001e51 pop rdi ; ret
[-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff81540d61 mov qword ptr [rsi], rdi ; pop rbx ; pop rbp ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81001e51 pop rdi ; ret
[-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff8105341e mov qword ptr [rsi], rax ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81029a11 pop rax ; ret
[+] Gadget found: 0xffffffff811f1c3b xor rax, rax ; ret
- Step 2 -- Init syscall number gadgets
$ ROPgadget.py --ropchain --binary vmlinux.zero* | sed -n '/Step 1/,/Step 2/p'
- Step 1 -- Write-what-where gadgets
[-] Can't find the 'mov qword ptr [r64], r64' gadget
For an x86_64 parallel build tests, this has a less than 1% performance
impact, and grows the image size less than 1%:
$ size vmlinux.stock vmlinux.zero-call-regs
text data bss dec hex filename
22437676 8559152 14127340 45124168 2b08a48 vmlinux.stock
22453184 8563248 14110956 45127388 2b096dc vmlinux.zero-call-regs
Impact for other architectures may vary. For example, arm64 sees a 5.5%
image size growth, mainly due to needing to always clear x16 and x17:
https://lore.kernel.org/lkml/20210510134503.GA88495@C02TD0UTHF1T.local/
Signed-off-by: Kees Cook <keescook@chromium.org>
The current definition of read_foo_diagnostic() in the "Lock Protection
With Lockless Diagnostic Access" section returns a value, which could
be use for any purpose. This could mislead people into incorrectly
using data_race() in cases where READ_ONCE() is required. This commit
therefore makes read_foo_diagnostic() simply print the value read.
Reported-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If CONFIG_KCSAN_STRICT=y, select CONFIG_KCSAN_INTERRUPT_WATCHER as well.
With interruptible watchers, we'll also report same-CPU data races; if
we requested strict mode, we might as well show these, too.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add rules to ignore data-racy reads with only 1-bit value changes.
Details about the rules are captured in comments in
kernel/kcsan/permissive.h. More background follows.
While investigating a number of data races, we've encountered data-racy
accesses on flags variables to be very common. The typical pattern is a
reader masking all but one bit, and/or the writer setting/clearing only
1 bit (current->flags being a frequently encountered case; more examples
in mm/sl[au]b.c, which disable KCSAN for this reason).
Since these types of data-racy accesses are common (with the assumption
they are intentional and hard to miscompile) having the option (with
CONFIG_KCSAN_PERMISSIVE=y) to filter them will avoid forcing everyone to
mark them, and deliberately left to preference at this time.
One important motivation for having this option built-in is to move
closer to being able to enable KCSAN on CI systems or for testers
wishing to test the whole kernel, while more easily filtering
less interesting data races with higher probability.
For the implementation, we considered several alternatives, but had one
major requirement: that the rules be kept together with the Linux-kernel
tree. Adding them to the compiler would preclude us from making changes
quickly; if the rules require tweaks, having them part of the compiler
requires waiting another ~1 year for the next release -- that's not
realistic. We are left with the following options:
1. Maintain compiler plugins as part of the kernel-tree that
removes instrumentation for some accesses (e.g. plain-& with
1-bit mask). The analysis would be reader-side focused, as
no assumption can be made about racing writers.
Because it seems unrealistic to maintain 2 plugins, one for LLVM and
GCC, we would likely pick LLVM. Furthermore, no kernel infrastructure
exists to maintain LLVM plugins, and the build-system implications and
maintenance overheads do not look great (historically, plugins written
against old LLVM APIs are not guaranteed to work with newer LLVM APIs).
2. Find a set of rules that can be expressed in terms of
observed value changes, and make it part of the KCSAN runtime.
The analysis is writer-side focused, given we rely on observed
value changes.
The approach taken here is (2). While a complete approach requires both
(1) and (2), experiments show that the majority of data races involving
trivial bit operations on flags variables can be removed with (2) alone.
It goes without saying that the filtering of data races using (1) or (2)
does _not_ guarantee they are safe! Therefore, limiting ourselves to (2)
for now is the conservative choice for setups that wish to enable
CONFIG_KCSAN_PERMISSIVE=y.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Show a brief message if KCSAN is strict or non-strict, and if non-strict
also say that CONFIG_KCSAN_STRICT=y can be used to see all data races.
This is to hint to users of KCSAN who blindly use the default config
that their configuration might miss data races of interest.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Rework atomic.h into permissive.h to better reflect its purpose, and
introduce kcsan_ignore_address() and kcsan_ignore_data_race().
Introduce CONFIG_KCSAN_PERMISSIVE and update the stub functions in
preparation for subsequent changes.
As before, developers who choose to use KCSAN in "strict" mode will see
all data races and are not affected. Furthermore, by relying on the
value-change filter logic for kcsan_ignore_data_race(), even if the
permissive rules are enabled, the opt-outs in report.c:skip_report()
override them (such as for RCU-related functions by default).
The option CONFIG_KCSAN_PERMISSIVE is disabled by default, so that the
documented default behaviour of KCSAN does not change. Instead, like
CONFIG_KCSAN_IGNORE_ATOMICS, the option needs to be explicitly opted in.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are a number get_ctx() calls that are close to each other, which
results in poor codegen (repeated preempt_count loads).
Specifically in kcsan_found_watchpoint() (even though it's a slow-path)
it is beneficial to keep the race-window small until the watchpoint has
actually been consumed to avoid missed opportunities to report a race.
Let's clean it up a bit before we add more code in
kcsan_found_watchpoint().
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a simpler Kconfig variable to configure KCSAN's "strict" mode. This
makes it simpler in documentation or messages to suggest just a single
configuration option to select the strictest checking mode (vs.
currently having to list several options).
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By this point CONFIG_KCSAN_DEBUG is pretty useless, as the system just
isn't usable with it due to spamming console (I imagine a randconfig
test robot will run into this sooner or later). Remove it.
Back in 2019 I used it occasionally to record traces of watchpoints and
verify the encoding is correct, but these days we have proper tests. If
something similar is needed in future, just add it back ad-hoc.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Improve comment for CC_HAS_TSAN_COMPOUND_READ_BEFORE_WRITE. Also shorten
the comment above the "strictness" configuration options.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Alan Maguire says:
====================
This series aims to resolve further issues with the BTF typed data
dumping interfaces in libbpf.
Compilation failures with use of __int128 on 32-bit platforms were
reported [1]. As a result, the use of __int128 in libbpf typed data
dumping is replaced with __u64 usage for bitfield manipulations.
In the case of 128-bit integer values, they are simply split into
two 64-bit hex values for display (patch 1).
Tests are added for __int128 display in patch 2, using conditional
compilation to avoid problems with a lack of __int128 support.
Patch 3 resolves an issue Andrii noted about error propagation
when handling enum data display.
More followup work is required to ensure multi-dimensional char array
display works correctly.
[1] https://lore.kernel.org/bpf/1626362126-27775-1-git-send-email-alan.maguire@oracle.com/T/#mc2cb023acfd6c3cd0b661e385787b76bb757430d
Changes since v1:
- added error handling for bitfield size > 64 bits by changing function
signature for bitfield retrieval to return an int error value and to set
bitfield value via a __u64 * argument (Andrii)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When retrieving the enum value associated with typed data during
"is data zero?" checking in btf_dump_type_data_check_zero(), the
return value of btf_dump_get_enum_value() is not passed to the caller
if the function returns a non-zero (error) value. Currently, 0
is returned if the function returns an error. We should instead
propagate the error to the caller.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-4-git-send-email-alan.maguire@oracle.com
__int128 is not supported for some 32-bit platforms (arm and i386).
__int128 was used in carrying out computations on bitfields which
aid display, but the same calculations could be done with __u64
with the small effect of not supporting 128-bit bitfields.
With these changes, a big-endian issue with casting 128-bit integers
to 64-bit for enum bitfields is solved also, as we now use 64-bit
integers for bitfield calculations.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-2-git-send-email-alan.maguire@oracle.com
Add support for the video clock controller found on SC7280
based devices. This would allow video drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-8-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for video clock subsystem clock
controller for Qualcomm Technology Inc's SC7280 SoCs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-7-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the graphics clock controller found on SC7280
based devices. This would allow graphics drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for graphics clock subsystem clock
controller for Qualcomm Technology Inc's SC7280 SoCs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-5-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the display clock controller found on SC7280
based devices. This would allow display drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for display clock controller subsystem for
Qualcomm Technology Inc's SC7280 SoCs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-3-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit is a first step towards pinning guest-OS vCPUs so as
to force latency differences, especially on multi-socket systems.
The kvm.sh script puts its batch-creation awk script into a temporary
file so that later commits can add the awk code needed to dole out CPUs
so as to maximize latency differences. This awk code will be used by
multiple scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>