ISH IPC driver uses asynchronous workqueue to do resume now, but there is
a potential timing issue: when child devices resume before bus driver, it
will cause child devices resume failed and cannot be recovered until
reboot. The current implementation in this case do wait for IPC to resume
but fail to accommodate for a case when there is no ISH reboot and soft
resume is taking time. This issue is apparent on Tiger Lake platform with
5.11.13 kernel when doing suspend to idle then resume(s0ix) test. To
resolve this issue, we change ISHTP HID client to use asynchronous resume
callback too. In the asynchronous resume callback, it waits for the ISHTP
resume done event, and then notify ISHTP HID client link ready.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add CPU caches information to its dt nodes so that the same is available
to userspace via sysfs. This SoC has 48/32 KB I/D cache for each A57
cores with 2MB L2 cache. And 32/32 KB I/D cache for each A53 cores with
256KB L2 cache.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210622130551.67446-2-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add CPU caches information to its dt nodes so that the same is available
to userspace via sysfs. This SoC has 48/32 KB I/D cache
for each cores and 2MB of L2 cache.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210622130551.67446-1-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The hardware stats API distinguishes between device and port statistics,
split the EFA stats accordingly instead of always dumping everything.
Link: https://lore.kernel.org/r/20210712105923.17389-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the returned value of the function irdma_setup_virt_qp is always 0,
remove the returned value check and change the returned type to void.
Link: https://lore.kernel.org/r/20210714031130.1511109-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the function irdma_set_hw_rsrc always returns zero, change the
returned type to void and remove all the related source code.
Link: https://lore.kernel.org/r/20210714031130.1511109-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.
=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
___sys_sendmsg net/socket.c:2397 [inline]
__sys_sendmmsg+0x808/0xc90 net/socket.c:2480
__compat_sys_sendmmsg net/compat.c:656 [inline]
Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes: bece7b2398 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a coverity warning about NULL pointer dereference:
Dereferencing "vsi", which is known to be "NULL".
Link: https://lore.kernel.org/r/20210708213521.438-1-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505164 ("Null pointer dereferences")
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.
To get the correct inuse_idx value move the core_initcall that initializes
the UDP proto handlers to late_initcall. This way it is initialized after
UDP has the chance to assign the inuse_idx value from the register protocol
handler.
Fixes: edc6741cc6 ("bpf: Add sockmap hooks for UDP sockets")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210714154750.528206-1-jakub@cloudflare.com
The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.
To get the correct inuse_idx value move the core_initcall that initializes
the TCP proto handlers to late_initcall. This way it is initialized after
TCP has the chance to assign the inuse_idx value from the register protocol
handler.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com
If skb_linearize is needed and fails we could leak a msg on the error
handling. To fix ensure we kfree the msg block before returning error.
Found during code review.
Fixes: 4363023d26 ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com
Currently array jit->seen_reg[r1] is being accessed before the range
checking of index r1. The range changing on r1 should be performed
first since it will avoid any potential out-of-range accesses on the
array seen_reg[] and also it is more optimal to perform checks on r1
before fetching data from the array. Fix this by swapping the order
of the checks before the array access.
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com
In rxe_mr_init_user() at the third error the driver fails to free the
memory at mr->map. This patch adds code to do that. This error only
occurs if page_address() fails to return a non zero address which should
never happen for 64 bit architectures.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210705164153.17652-1-rpearsonhpe@gmail.com
Reported by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
The use of kmap() in siw_tx_hdt() is all thread local therefore
kmap_local_page() is a sufficient replacement and will work with pgmap
protected pages when those are implemented.
siw_tx_hdt() tracks pages used in a page_array. It uses that array to
unmap pages which were mapped on function exit. Not all entries in the
array are mapped and this is tracked in kmap_mask.
kunmap_local() takes a mapped address rather than a page. Alter
siw_unmap_pages() to take the iov array to reuse the iov_base address of
each mapping. Use PAGE_MASK to get the proper address for kunmap_local().
kmap_local_page() mappings are tracked in a stack and must be unmapped in
the opposite order they were mapped in. Because segments are mapped into
the page array in increasing index order, modify siw_unmap_pages() to
unmap pages in decreasing order.
Use kmap_local_page() instead of kmap() to map pages in the page_array.
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210624174814.2822896-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
These uses of kmap() in the SIW driver are thread local. Therefore
kmap_local_page() is sufficient to use and will work with pgmap protected
pages when those are implemnted.
There is one more use of kmap() in this driver which is split into its own
patch because kmap_local_page() has strict ordering rules and the use of
the kmap_mask over multiple segments must be handled carefully.
Therefore, that conversion is handled in a stand alone patch.
Use kmap_local_page() instead of kmap() in the 'easy' cases.
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210622061422.2633501-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tracepoint trace_qdisc_enqueue() is introduced to trace skb at
the entrance of TC layer on TX side. This is similar to
trace_qdisc_dequeue():
1. For both we only trace successful cases. The failure cases
can be traced via trace_kfree_skb().
2. They are called at entrance or exit of TC layer, not for each
->enqueue() or ->dequeue(). This is intentional, because
we want to make trace_qdisc_enqueue() symmetric to
trace_qdisc_dequeue(), which is easier to use.
The return value of qdisc_enqueue() is not interesting here,
we have Qdisc's drop packets in ->dequeue(), it is impossible to
trace them even if we have the return value, the only way to trace
them is tracing kfree_skb().
We only add information we need to trace ring buffer. If any other
information is needed, it is easy to extend it without breaking ABI,
see commit 3dd344ea84 ("net: tracepoint: exposing sk_family in all
tcp:tracepoints").
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Qitao Xu <qitao.xu@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Print format of skbaddr is changed to %px from %p, because we want
to use skb address as a quick way to identify a packet.
Note, trace ring buffer is only accessible to privileged users,
it is safe to use a real kernel address here.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Qitao Xu <qitao.xu@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The print format of skb adress in tracepoint class net_dev_template
is changed to %px from %p, because we want to use skb address
as a quick way to identify a packet.
Note, trace ring buffer is only accessible to privileged users,
it is safe to use a real kernel address here.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Qitao Xu <qitao.xu@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS
(29) bits will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7)
the shifted value will be sign extended and the top 32 bits of the result
will be set.
Fix this by casting the u16 values to a u64 before the 29 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 3451b97cce ("liquidio: CN23XX register setup")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local variable "struct net *net" in the two functions of
inet6_rtm_getaddr() and inet6_dump_addr() are actually useless,
so remove them.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to account HB for sq_wr_avail properly, move sq_wr_avail from
rtrs_srv_con to rtrs_con.
Although rtrs-clt do not care sq_wr_avail, but still init it to
max_send_wr.
Fixes: b38041d50a ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-7-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
flags is not used, so remove it from rtrs_post_rdma_write_imm_empty.
Link: https://lore.kernel.org/r/20210712060750.16494-6-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's only used in rtrs.c, so no need to export.
Link: https://lore.kernel.org/r/20210712060750.16494-5-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On idle session, because we do not do signal for heartbeat, it will
overflow the send queue after sometime.
To avoid that, we need to enable the signal for heartbeat. To do that, add
a new member signal_interval in rtrs_path, which will set min of
queue_depth and SERVICE_CON_QUEUE_DEPTH, and track it for both heartbeat
and IO, so the sq queue full accounting is correct.
Fixes: b38041d50a ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-4-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We need to track also the wr used for heatbeat. This is a preparation for
that, will be used in later patch.
The io_cnt in rtrs_clt is removed, use wr_cnt instead.
Link: https://lore.kernel.org/r/20210712060750.16494-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It could help debugging in case of error happens.
Link: https://lore.kernel.org/r/20210712060750.16494-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The MRU value used by the MHI MBIM network interface affects
the throughput performance of the interface. Different modem
models use different default MRU sizes based on their bandwidth
capabilities. Large values generally result in higher throughput
for larger packet sizes.
In addition if the MRU used by the MHI device is larger than that
specified in the MHI net device the data is fragmented and needs
to be re-assembled which generates a (single) warning message about
the fragmented packets. Setting the MRU on both ends avoids the
extra processing to re-assemble the packets.
This patch allows the documented MRU for a modem to be automatically
set as the MHI net device MRU avoiding fragmentation and improving
throughput performance.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 82e5d378b0 ("mm/hugetlb: refactor subpage recording")
refactored the count of subpages but missed an edge case when @vaddr is
not aligned to PAGE_SIZE e.g. when close to vma->vm_end. It would then
errousnly set @refs to 0 and record_subpages_vmas() wouldn't set the
@pages array element to its value, consequently causing the reported
null-deref by syzbot.
Fix it by aligning down @vaddr by PAGE_SIZE in @refs calculation.
Link: https://lkml.kernel.org/r/20210713152440.28650-1-joao.m.martins@oracle.com
Fixes: 82e5d378b0 ("mm/hugetlb: refactor subpage recording")
Reported-by: syzbot+a3fcd59df1b372066f5a@syzkaller.appspotmail.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Syzbot reports a possible recursive lock in [1].
This happens due to missing lock nesting information. From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed. Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root. This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.
Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.
To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+). This has already been done in hfsplus.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-4-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Tested-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "hfs: fix various errors", v2.
This series ultimately aims to address a lockdep warning in
hfs_find_init reported by Syzbot [1].
The work done for this led to the discovery of another bug, and the
Syzkaller repro test also reveals an invalid memory access error after
clearing the lockdep warning. Hence, this series is broken up into
three patches:
1. Add a missing call to hfs_find_exit for an error path in
hfs_fill_super
2. Fix memory mapping in hfs_bnode_read by fixing calls to kmap
3. Add lock nesting notation to tell lockdep that the observed locking
hierarchy is safe
This patch (of 3):
Before exiting hfs_fill_super, the struct hfs_find_data used in
hfs_find_init should be passed to hfs_find_exit to be cleaned up, and to
release the lock held on the btree.
The call to hfs_find_exit is missing from an error path. We add it back
in by consolidating calls to hfs_find_exit for error paths.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-1-desmondcheongzx@gmail.com
Link: https://lkml.kernel.org/r/20210701030756.58760-2-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The HMM selftests use atomic_check_access() to check atomic access to a
page has been revoked. It doesn't matter if the page mapping has been
removed from the mirrored page tables as that also implies atomic access
has been revoked. Therefore remove the unused page variable to fix this
compiler warning:
lib/test_hmm.c:631:16: warning: variable `page' set but not used [-Wunused-but-set-variable]
Link: https://lkml.kernel.org/r/20210706025603.4059-1-apopple@nvidia.com
Fixes: b659baea75 ("mm: selftests for exclusive device memory")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjust the nommu stub of try_to_unmap to match the changed protype for the
full version. Turn it into an inline instead of a macro to generally
improve the type checking.
Link: https://lkml.kernel.org/r/20210705053944.885828-1-hch@lst.de
Fixes: 1fb08ac63b ("mm: rmap: make try_to_unmap() void function")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The author of commit b3b64ebd38 ("mm/page_alloc: do bulk array
bounds check after checking populated elements") was possibly
confused by the mixture of return values throughout the function.
The API contract is clear that the function "Returns the number of pages
on the list or array." It does not list zero as a unique return value with
a special meaning. Therefore zero is a plausible return value only if
@nr_pages is zero or less.
Clean up the return logic to make it clear that the returned value is
always the total number of pages in the array/list, not the number of
pages that were allocated during this call.
The only change in behavior with this patch is the value returned if
prepare_alloc_pages() fails. To match the API contract, the number of
pages currently in the array/list is returned in this case.
The call site in __page_pool_alloc_pages_slow() also seems to be confused
on this matter. It should be attended to by someone who is familiar with
that code.
[mel@techsingularity.net: Return nr_populated if 0 pages are requested]
Link: https://lkml.kernel.org/r/20210713152100.10381-4-mgorman@techsingularity.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: Zhang Qiang <Qiang.Zhang@windriver.com>
Cc: Yanfei Xu <yanfei.xu@windriver.com>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Syzbot is reporting potential deadlocks due to pagesets.lock when
PAGE_OWNER is enabled. One example from Desmond Cheong Zhi Xi is as
follows
__alloc_pages_bulk()
local_lock_irqsave(&pagesets.lock, flags) <---- outer lock here
prep_new_page():
post_alloc_hook():
set_page_owner():
__set_page_owner():
save_stack():
stack_depot_save():
alloc_pages():
alloc_page_interleave():
__alloc_pages():
get_page_from_freelist():
rm_queue():
rm_queue_pcplist():
local_lock_irqsave(&pagesets.lock, flags);
*** DEADLOCK ***
Zhang, Qiang also reported
BUG: sleeping function called from invalid context at mm/page_alloc.c:5179
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
.....
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:96
___might_sleep.cold+0x1f1/0x237 kernel/sched/core.c:9153
prepare_alloc_pages+0x3da/0x580 mm/page_alloc.c:5179
__alloc_pages+0x12f/0x500 mm/page_alloc.c:5375
alloc_page_interleave+0x1e/0x200 mm/mempolicy.c:2147
alloc_pages+0x238/0x2a0 mm/mempolicy.c:2270
stack_depot_save+0x39d/0x4e0 lib/stackdepot.c:303
save_stack+0x15e/0x1e0 mm/page_owner.c:120
__set_page_owner+0x50/0x290 mm/page_owner.c:181
prep_new_page mm/page_alloc.c:2445 [inline]
__alloc_pages_bulk+0x8b9/0x1870 mm/page_alloc.c:5313
alloc_pages_bulk_array_node include/linux/gfp.h:557 [inline]
vm_area_alloc_pages mm/vmalloc.c:2775 [inline]
__vmalloc_area_node mm/vmalloc.c:2845 [inline]
__vmalloc_node_range+0x39d/0x960 mm/vmalloc.c:2947
__vmalloc_node mm/vmalloc.c:2996 [inline]
vzalloc+0x67/0x80 mm/vmalloc.c:3066
There are a number of ways it could be fixed. The page owner code could
be audited to strip GFP flags that allow sleeping but it'll impair the
functionality of PAGE_OWNER if allocations fail. The bulk allocator could
add a special case to release/reacquire the lock for prep_new_page and
lookup PCP after the lock is reacquired at the cost of performance. The
pages requiring prep could be tracked using the least significant bit and
looping through the array although it is more complicated for the list
interface. The options are relatively complex and the second one still
incurs a performance penalty when PAGE_OWNER is active so this patch takes
the simple approach -- disable bulk allocation of PAGE_OWNER is active.
The caller will be forced to allocate one page at a time incurring a
performance penalty but PAGE_OWNER is already a performance penalty.
Link: https://lkml.kernel.org/r/20210708081434.GV3840@techsingularity.net
Fixes: dbbee9d5cd ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: "Zhang, Qiang" <Qiang.Zhang@windriver.com>
Reported-by: syzbot+127fd7828d6eeb611703@syzkaller.appspotmail.com
Tested-by: syzbot+127fd7828d6eeb611703@syzkaller.appspotmail.com
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The <linux/kasan.h> header relies on _RET_IP_ being defined, and had been
receiving that definition via inclusion of bug.h which includes kernel.h.
However, since f39650de68 ("kernel.h: split out panic and oops helpers")
that is no longer the case and get the following build error when building
CONFIG_KASAN_HW_TAGS on arm64:
In file included from arch/arm64/mm/kasan_init.c:10:
include/linux/kasan.h: In function 'kasan_slab_free':
include/linux/kasan.h:230:39: error: '_RET_IP_' undeclared (first use in this function)
230 | return __kasan_slab_free(s, object, _RET_IP_, init);
Fix it by including kernel.h from kasan.h.
Link: https://lkml.kernel.org/r/20210705072716.2125074-1-elver@google.com
Fixes: f39650de68 ("kernel.h: split out panic and oops helpers")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Issue: when SLUB debug is on, hwtag kasan_unpoison() would overwrite the
redzone of object with unaligned size.
An additional memzero_explicit() path is added to replacing init by hwtag
instruction for those unaligned size at SLUB debug mode.
The penalty is acceptable since they are only enabled in debug mode, not
production builds. A block of comment is added for explanation.
Link: https://lkml.kernel.org/r/20210705103229.8505-3-yee.lee@mediatek.com
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the helper to check slub_debug_enabled, so that we can confine the
use of #ifdef outside slub.c as well.
Link: https://lkml.kernel.org/r/20210705103229.8505-2-yee.lee@mediatek.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Making global2 support mandatory removed the Kconfig symbol
NET_DSA_MV88E6XXX_GLOBAL2. This symbol also served as an intermediate
symbol to make NET_DSA_MV88E6XXX_PTP depend on NET_DSA_MV88E6XXX. With
the symbol removed, the user is always asked about PTP support for
Marvell 88E6xxx switches, even if the latter support is not enabled.
Fix this by reinstating the dependency.
Fixes: 63368a7416 ("net: dsa: mv88e6xxx: Make global2 support mandatory")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we encounter a directory that has been configured to pass on an
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should flag the hint for
administrative review because that is a misconfiguration (that other
parts of the kernel will fix automatically).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During a realtime grow operation, we run a single transaction for each
rt bitmap block added to the filesystem. This means that each step has
to be careful to increase sb_rblocks appropriately.
Fix the integer overflow error in this calculation that can happen when
the extent size is very large. Found by running growfs to add a rt
volume to a filesystem formatted with a 1g rt extent size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Improve the checking at the start of a realtime grow operation so that
we avoid accidentally set a new extent size that is too large and avoid
adding an rt volume to a filesystem with rmap or reflink because we
don't support rt rmap or reflink yet.
While we're at it, separate the checks so that we're only testing one
aspect at a time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 603f000b15 changed xfs_ioctl_setattr_check_extsize to reject an
attempt to set an EXTSZINHERIT extent size hint on a directory with
RTINHERIT set if the hint isn't a multiple of the realtime extent size.
However, I have recently discovered that it is possible to change the
realtime extent size when adding a rt device to a filesystem, which
means that the existence of directories with misaligned inherited hints
is not an accident.
As a result, it's possible that someone could have set a valid hint and
added an rt volume with a different rt extent size, which invalidates
the ondisk hints. After such a sequence, FSGETXATTR will report a
misaligned hint, which FSSETXATTR will trip over, causing confusion if
the user was doing the usual GET/SET sequence to change some other
attribute. Change xfs_fill_fsxattr to omit the hint if it isn't aligned
properly.
Fixes: 603f000b15 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>