Commit graph

1,044,825 commits

Author SHA1 Message Date
Ville Syrjälä
8538d78e26 drm/i915/fbc: Make the cfb allocation loop a bit more legible
Write the cfb allocation loop as an actual loop instead of some
hard to read goto thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:49:54 +03:00
Ville Syrjälä
c48f67ee91 drm/i915/fbc: Extract intel_fbc_stolen_end()
Declutter find_compression_limit() a bit by extracting
intel_fbc_stolen_end().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:48:52 +03:00
Ville Syrjälä
9c8a442d9d drm/i915/fbc: Introduce g4x_dpfc_ctl_limit()
Exctract the limit->register value conversion into a common
helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:48:35 +03:00
Ville Syrjälä
d502f6c438 drm/i915/fbc: Handle 16bpp compression limit better
The limit++ for the 16bpp case is nonsense since the
compression limit is always supposed to be power of two.
Replace it with <<=1.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:48:02 +03:00
Ville Syrjälä
337e54f77c drm/i915/fbc: Don't pass around the mm node
No point in passing the mm node explicitly to find_compression_limit()
since it's always the same node for the cfb.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:47:37 +03:00
Ville Syrjälä
45a321a7ee drm/i915/fbc: Embed the compressed_llb node
Not much point in dynamically allocating the line length
buffer mm node that I can see. Just embed it directly like
we do the for the cfb node. One less failure point to worry
about.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:47:18 +03:00
Ville Syrjälä
5826d9f211 drm/i915/fbc: Extract intel_fbc_program_cfb()
Extract the CFB (+LLB) programming into a separate function.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:46:54 +03:00
Ville Syrjälä
0ba1d03cd8 drm/i915/fbc: s/threshold/limit/
Let's call the compression limit the limit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24 21:46:17 +03:00
Ville Syrjälä
51565971cd drm/i915: Add the missing adls vswing tables
adls is supposed to use special buf trans tables. Add what's
missing.

v2: Drop the RBR/HBR table since it's the same as for tgl

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-06-24 21:37:17 +03:00
Ville Syrjälä
150712dfd7 drm/i915: Nuke buf_trans hdmi functions
All the foo_get_buf_trans_hdmi() functions just return a single table.
Remove the pointless wrappers.

v2: Handle adl-p

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-06-24 21:37:07 +03:00
Ville Syrjälä
2b3bc165d0 drm/i915: Clean up jsl/ehl buf trans functions
The jsl/ehl buf trans functions are needlessly complicated.
Simplify them.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-16-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-06-24 21:36:36 +03:00
Joshua Martinez
51f382428c perf top: Add cgroup support for perf top (-G)
Added callback option (-G) to support cgroups for 'perf top'.

Added condition to make sure -cgroup and --all-cgroups aren't both enabled.

Example:

  $perf top -e cycles -G system.slice/docker-6b95a5eb649c0d671eba3835f0d93973d05a088f3ae8602246bde37affb1ba3e.scope -a --stdio

   PerfTop:    3330 irqs/sec  kernel:68.2%  exact:  0.0% lost: 0/0 drop: 0/11075 [4000Hz cpu-clock],  (all, 4 CPUs)
   -------------------------------------------------------------------------------------------------------------------------------------------------------

    27.32%  [unknown]         [.] 0x00007f8ab7b69352
    11.44%  [kernel]          [k] 0xffffffff968cd657
     3.12%  [kernel]          [k] 0xffffffff96160e96
     2.63%  [kernel]          [k] 0xffffffff96160eb0
     1.96%  [kernel]          [k] 0xffffffff9615fcf6
     1.42%  [kernel]          [k] 0xffffffff964ddfc7
     1.09%  [kernel]          [k] 0xffffffff96160e90
     0.81%  [kernel]          [k] 0xffffffff96160eb3
     0.67%  [kernel]          [k] 0xffffffff9615fec1
     0.57%  [kernel]          [k] 0xffffffff961ee1d0
     0.53%  [unknown]         [.] 0x00007f8ab7b6666c
     0.53%  [kernel]          [k] 0xffffffff96160e64
     0.52%  [kernel]          [k] 0xffffffff9616c303
     0.51%  [kernel]          [k] 0xffffffffc08e7d50
     ...

Signed-off-by: Joshua Martinez <joshuamart@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: joshua martinez <joshuamart@google.com>
Link: http://lore.kernel.org/lkml/20210616231829.3735671-1-joshuamart@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-24 15:33:35 -03:00
Colin Ian King
b01d550663
spi: Fix self assignment issue with ancillary->mode
There is an assignment of ancillary->mode to itself which looks
dubious since the proceeding comment states that the speed and
mode is taken over from the SPI main device, indicating that
ancillary->mode should assigned using the value spi->mode.
Fix this.

Addresses-Coverity: ("Self assignment")
Fixes: 0c79378c01 ("spi: add ancillary device support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210623172300.161484-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-24 19:29:57 +01:00
Srinivas Kandagatla
6a7f5bd618
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
Currently IRQ_CLEAR register is marked as write-only, however using
regmap_update_bits on this register will have some side effects.
so mark IRQ_CLEAR register appropriately as readable and volatile.

Fixes: da0363f7bf ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210624092153.5771-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-24 19:29:53 +01:00
Håkon Bugge
ca0c448d2b RDMA/cma: Protect RMW with qp_mutex
The struct rdma_id_private contains three bit-fields, tos_set,
timeout_set, and min_rnr_timer_set. These are set by accessor functions
without any synchronization. If two or all accessor functions are invoked
in close proximity in time, there will be Read-Modify-Write from several
contexts to the same variable, and the result will be intermittent.

Fixed by protecting the bit-fields by the qp_mutex in the accessor
functions.

The consumer of timeout_set and min_rnr_timer_set is in
rdma_init_qp_attr(), which is called with qp_mutex held for connected
QPs. Explicit locking is added for the consumers of tos and tos_set.

This commit depends on ("RDMA/cma: Remove unnecessary INIT->INIT
transition"), since the call to rdma_init_qp_attr() from
cma_init_conn_qp() does not hold the qp_mutex.

Fixes: 2c1619edef ("IB/cma: Define option to set ack timeout and pack tos_set")
Fixes: 3aeffc46af ("IB/cma: Introduce rdma_set_min_rnr_timer()")
Link: https://lore.kernel.org/r/1624369197-24578-3-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24 15:29:53 -03:00
Håkon Bugge
dc70f7c3ed RDMA/cma: Remove unnecessary INIT->INIT transition
In rdma_create_qp(), a connected QP will be transitioned to the INIT
state.

Afterwards, the QP will be transitioned to the RTR state by the
cma_modify_qp_rtr() function. But this function starts by performing an
ib_modify_qp() to the INIT state again, before another ib_modify_qp() is
performed to transition the QP to the RTR state.

Hence, there is no need to transition the QP to the INIT state in
rdma_create_qp().

Link: https://lore.kernel.org/r/1624369197-24578-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24 15:29:53 -03:00
Ville Syrjälä
019d8146aa drm/i915: Fix ehl edp hbr2 vswing table
EHL is supposed to use special buf trans values for eDP HBR2+.
Add such a table.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-06-24 21:28:43 +03:00
David S. Miller
67faf76d26 Merge branch 'add-sparx5i-driver'
Steen Hegelund says:

====================
Adding the Sparx5i Switch Driver

This series provides the Microchip Sparx5i Switch Driver

The SparX-5 Enterprise Ethernet switch family provides a rich set of
Enterprise switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and security
through TCAMbased frame processing using versatile content aware processor
(VCAP). IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K IPv6
(S,G) multicast groups. L3 security features include source guard and
reverse path forwarding (uRPF) tasks. Additional L3 features include
VRF-Lite and IP tunnels (IP over GRE/IP).

The SparX-5 switch family features a highly flexible set of Ethernet ports
with support for 10G and 25G aggregation links, QSGMII, USGMII, and
USXGMII.  The device integrates a powerful 1 GHz dual-core ARM® Cortex®-A53
CPU enabling full management of the switch and advanced Enterprise
applications.

The SparX-5 switch family targets managed Layer 2 and Layer 3 equipment in
SMB, SME, and Enterprise where high port count 1G/2.5G/5G/10G switching
with 10G/25G aggregation links is required.

The SparX-5 switch family consists of following SKUs:

  VSC7546 SparX-5-64 supports up to 64 Gbps of bandwidth with the following
  primary port configurations.
   - 6 ×10G
   - 16 × 2.5G + 2 × 10G
   - 24 × 1G + 4 × 10G

  VSC7549 SparX-5-90 supports up to 90 Gbps of bandwidth with the following
  primary port configurations.
   - 9 × 10G
   - 16 × 2.5G + 4 × 10G
   - 48 × 1G + 4 × 10G

  VSC7552 SparX-5-128 supports up to 128 Gbps of bandwidth with the
  following primary port configurations.
   - 12 × 10G
   - 6 x 10G + 2 x 25G
   - 16 × 2.5G + 8 × 10G
   - 48 × 1G + 8 × 10G

  VSC7556 SparX-5-160 supports up to 160 Gbps of bandwidth with the
  following primary port configurations.
   - 16 × 10G
   - 10 × 10G + 2 × 25G
   - 16 × 2.5G + 10 × 10G
   - 48 × 1G + 10 × 10G

  VSC7558 SparX-5-200 supports up to 200 Gbps of bandwidth with the
  following primary port configurations.
   - 20 × 10G
   - 8 × 25G

In addition, the device supports one 10/100/1000/2500/5000 Mbps
SGMII/SerDes node processor interface (NPI) Ethernet port.

Time sensitive networking (TSN) is supported through a comprehensive set of
features including frame preemption, cut-through, frame replication and
elimination for reliability, enhanced scheduling: credit-based shaping,
time-aware shaping, cyclic queuing, and forwarding, and per-stream policing
and filtering.

Together with IEEE 1588 and IEEE 802.1AS support, this guarantees
low-latency deterministic networking for Industrial Ethernet.

The Sparx5i support is developed on the PCB134 and PCB135 evaluation boards.

- PCB134 main networking features:
  - 12x SFP+ front 10G module slots (connected to Sparx5i through SFI).
  - 8x SFP28 front 25G module slots (connected to Sparx5i through SFI high
    speed).
  - Optional, one additional 10/100/1000BASE-T (RJ45) Ethernet port
    (on-board VSC8211 PHY connected to Sparx5i through SGMII).

- PCB135 main networking features:
  - 48x1G (10/100/1000M) RJ45 front ports using 12xVSC8514 QuadPHY’s each
    connected to VSC7558 through QSGMII.
  - 4x10G (1G/2.5G/5G/10G) RJ45 front ports using the AQR407 10G QuadPHY
    each port connects to VSC7558 through SFI.
  - 4x SFP28 25G module slots on back connected to VSC7558 through SFI high
    speed.
  - Optional, one additional 1G (10/100/1000M) RJ45 port using an on-board
    VSC8211 PHY, which can be connected to VSC7558 NPI port through SGMII
    using a loopback add-on PCB)

This series provides support for:
  - SFPs and DAC cables via PHYLINK with a number of 5G, 10G and 25G
    devices and media types.
  - Port module configuration for 10M to 25G speeds with SGMII, QSGMII,
    1000BASEX, 2500BASEX and 10GBASER as appropriate for these modes.
  - SerDes configuration via the Sparx5i SerDes driver (see below).
  - Host mode providing register based injection and extraction.
  - Switch mode providing MAC/VLAN table learning and Layer2 switching
    offloaded to the Sparx5i switch.
  - STP state, VLAN support, host/bridge port mode, Forwarding DB, and
    configuration and statistics via ethtool.

More support will be added at a later stage.

The Sparx5i Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfo
and the datasheet is available here:
https://ww1.microchip.com/downloads/en/DeviceDoc/SparX-5_Family_L2L3_Enterprise_10G_Ethernet_Switches_Datasheet_00003822B.pdf

The series depends on the following series currently on their way
into the kernel:

- 25G Base-R phy mode
  Link: https://lore.kernel.org/r/20210611125453.313308-1-steen.hegelund@microchip.com/
- Sparx5 Reset Driver
  Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/

ChangeLog:
v5:
    - cover letter
        - updated the description to match the latest data sheets
    - basic driver
        - added error message in case of reset controller error
        - port struct: replacing has_sfp with inband, adding pause_adv
    - host mode
        - port cleanup: unregisters netdevs and then removes phylink etc
        - checking for pause_adv when comparing port config changes
        - getting duplex and pause state in the link_up callback.
        - getting inband, autoneg and pause_adv config in the pcs_config
          callback.
    - port
        - use only the pause_adv bits when getting aneg status
        - use the inband state when updating the PCS and port config
v4:
    - basic driver:
        Using devm_reset_control_get_optional_shared to get the reset
        control, and let the reset framework check if it is valid.
    - host mode (phylink):
        Use the PCS operations to get state and update configuration.
        Removed the setting of interface modes.  Let phylink control this.
        Using the new 5gbase-r and 25gbase-r modes.
        Using a helper function to check if one of the 3 base-r modes has
        been selected.
        Currently it will not be possible to change the interface mode by
        changing the speed (e.g via ethtool).  This will be added later.
v3:
    - basic driver:
        - removed unneeded braces
        - release reference to ports node after use
        - use dev_err_probe to handle DEFER
        - update error value when bailing out (a few cases)
        - updated formatting of port struct and grouping of bool values
        - simplified the spx5_rmw and spx5_inst_rmw inline functions
    - host mode (netdev):
        - removed lockless flag
        - added port timer init
    - host mode (packet - manual injection):
        - updated error counters in error situations
        - implemented timer handling of watermark threshold: stop and
          restart netif queues.
        - fixed error message handling (rate limited)
        - fixed comment style error
        - used DIV_ROUND_UP macro
        - removed a debug message for open ports

v2:
    - Updated bindings:
        - drop minItems for the reg property
    - Statistics implementation:
        - Reorganized statistics into ethtool groups:
            eth-phy, eth-mac, eth-ctrl, rmon
          as defined by the IEEE 802.3 categories and RFC 2819.
        - The remaining statistics are provided by the classic ethtool
          statistics command.
    - Hostmode support:
        - Removed netdev renaming
        - Validate ethernet address in sparx5_set_mac_address()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
d0f482bb06 arm64: dts: sparx5: Add the Sparx5 switch node
This provides the configuration for the currently available evaluation
boards PCB134 and PCB135.

The series depends on the following series currently on its way
into the kernel:

- Sparx5 Reset Driver
  Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
af4b11022e net: sparx5: add ethtool configuration and statistics support
This adds statistic counters for the network interfaces provided
by the driver.  It also adds CPU port counters (which are not
exposed by ethtool).
This also adds support for configuring the network interface
parameters via ethtool: speed, duplex, aneg etc.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
0a9d48ad0d net: sparx5: add calendar bandwidth allocation support
This configures the Sparx5 calendars according to the bandwidth
requested in the Device Tree nodes.
It also checks if the total requested bandwidth is within the
specs of the detected Sparx5 models limits.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
d6fce51419 net: sparx5: add switching support
This adds SwitchDev support by hardware offloading the
software bridge.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
78eab33bb6 net: sparx5: add vlan support
This adds Sparx5 VLAN support.

Sparx5 has more VLAN features than provided here, but these will be added
in later series. For now we only add the basic L2 features.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
b37a1bae74 net: sparx5: add mactable support
This adds the Sparx5 MAC tables: listening for MAC table updates and
updating on request.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:13 -07:00
Steen Hegelund
946e7fd505 net: sparx5: add port module support
This add configuration of the Sparx5 port module instances.

Sparx5 has in total 65 logical ports (denoted D0 to D64) and 33
physical SerDes connections (S0 to S32).  The 65th port (D64) is fixed
allocated to SerDes0 (S0). The remaining 64 ports can in various
multiplexing scenarios be connected to the remaining 32 SerDes using
QSGMII, or USGMII or USXGMII extenders. 32 of the ports can have a 1:1
mapping to the 32 SerDes.

Some additional ports (D65 to D69) are internal to the device and do not
connect to port modules or SerDes macros. For example, internal ports are
used for frame injection and extraction to the CPU queues.

The 65 logical ports are split up into the following blocks.

- 13 x 5G ports (D0-D11, D64)
- 32 x 2G5 ports (D16-D47)
- 12 x 10G ports (D12-D15, D48-D55)
- 8 x 25G ports (D56-D63)

Each logical port supports different line speeds, and depending on the
speeds supported, different port modules (MAC+PCS) are needed. A port
supporting 5 Gbps, 10 Gbps, or 25 Gbps as maximum line speed, will have a
DEV5G, DEV10G, or DEV25G module to support the 5 Gbps, 10 Gbps (incl 5
Gbps), or 25 Gbps (including 10 Gbps and 5 Gbps) speeds. As well as, it
will have a shadow DEV2G5 port module to support the lower speeds
(10/100/1000/2500Mbps). When a port needs to operate at lower speed and the
shadow DEV2G5 needs to be connected to its corresponding SerDes

Not all interface modes are supported in this series, but will be added at
a later stage.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:12 -07:00
Steen Hegelund
f3cad2611a net: sparx5: add hostmode with phylink support
This patch adds netdevs and phylink support for the ports in the switch.
It also adds register based injection and extraction for these ports.

Frame DMA support for injection and extraction will be added in a later
series.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:12 -07:00
Steen Hegelund
3cfa11bac9 net: sparx5: add the basic sparx5 driver
This adds the Sparx5 basic SwitchDev driver framework with IO range
mapping, switch device detection and core clock configuration.

Support for ports, phylink, netdev, mactable etc. are in the following
patches.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:12 -07:00
Steen Hegelund
f8c63088a9 dt-bindings: net: sparx5: Add sparx5-switch bindings
Document the Sparx5 switch device driver bindings

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:28:12 -07:00
David S. Miller
abe90454f0 linux-can-fixes-for-5.13-20210624
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmDUKNUTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqb9BB/9V7TVpbOzQ3vvhS7w/7oz357aodB2t
 uL4R5jV0fCf9hKXlHdbT3VKG49sPCnOSlZ3YYpFwfxB/AowWOe5sf9zKwcIb7z95
 O3ZouirZYFRcTwFQs/wN4kUetyXl/gcHVJpvxQHowqf3U+f7u//JOiiBNeIbAdZA
 f5+KfB77ZfuUpOjtijX3Tt4HnfbzWKCcf17cncTK0dWVJkChfqtBP1+H/9iH/xjj
 8vVaW8Kx1FDLY7CKcHfCGxQy5QUy2OK+hfmeP60tUXdnB1znBbWH2D1Sc/aHlb3R
 iWTBMBoxbZbN6YBYMBDjzwXgfYNb6IIAcV02xlvn+9nMShJPKeoxz3Mz
 =9WcJ
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.13-20210624' of git://git.kernel.org/
pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-06-24

this is a pull request of 2 patches for net/master.

The first patch is by Norbert Slusarek and prevent allocation of
filter for optlen == 0 in the j1939 CAN protocol.

The last patch is by Stephane Grosjean and fixes a potential
starvation in the TX path of the peak_pciefd driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:24:36 -07:00
David S. Miller
ede285b105 Merge branch 'ibmvnic-fixes'
Sukadev Bhattiprolu says:

====================
ibmvnic: Assorted bug fixes

Assorted bug fixes that we tested over the last several weeks.

Thanks to Brian King, Cris Forno, Dany Madden and Rick Lindsley for
reviews and help with testing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:24 -07:00
Sukadev Bhattiprolu
154b3b2a6f ibmvnic: parenthesize a check
Parenthesize a check to be more explicit and to fix a sparse warning
seen on some distros.

Fixes: 91dc5d2553 ("ibmvnic: fix miscellaneous checks")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:24 -07:00
Sukadev Bhattiprolu
f6ebca8efa ibmvnic: free tx_pool if tso_pool alloc fails
Free tx_pool and clear it, if allocation of tso_pool fails.

release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is
non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption
will not be true and we would end up dereferencing ->tx_buff, ->free_map
fields from a NULL pointer.

Fixes: 3205306c6b ("ibmvnic: Update TX pool initialization routine")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Sukadev Bhattiprolu
552a33729f ibmvnic: set ltb->buff to NULL after freeing
free_long_term_buff() checks ltb->buff to decide whether we have a long
term buffer to free. So set ltb->buff to NULL afer freeing. While here,
also clear ->map_id, fix up some coding style and log an error.

Fixes: 9c4eaabd1b ("Check CRQ command return codes")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Sukadev Bhattiprolu
72368f8b2b ibmvnic: account for bufs already saved in indir_buf
This fixes a crash in replenish_rx_pool() when called from ibmvnic_poll()
after a previous call to replenish_rx_pool() encountered an error when
allocating a socket buffer.

Thanks to Rick Lindsley and Dany Madden for helping debug the crash.

Fixes: 4f0b6812e9 ("ibmvnic: Introduce batched RX buffer descriptor transmission")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Sukadev Bhattiprolu
65d6470d13 ibmvnic: clean pending indirect buffs during reset
We batch subordinate command response queue (scrq) descriptors that we
need to send to the VIOS using an "indirect" buffer. If after we queue
one or more scrqs in the indirect buffer encounter an error (say fail
to allocate an skb), we leave the queued scrq descriptors in the
indirect buffer until the next call to ibmvnic_xmit().

On the next call to ibmvnic_xmit(), it is possible that the adapter is
going through a reset and it is possible that the long term  buffers
have been unmapped on the VIOS side. If we proceed to flush (send) the
packets that are in the indirect buffer, we will end up using the old
map ids and this can cause the VIOS to trigger an unnecessary FATAL
error reset.

Instead of flushing packets remaining on the indirect_buff, discard
(clean) them instead.

Fixes: 0d97338818 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Dany Madden
2ca220f928 Revert "ibmvnic: remove duplicate napi_schedule call in open function"
This reverts commit 7c451f3ef6.

When a vnic interface is taken down and then up, connectivity is not
restored. We bisected it to this commit. Reverting this commit until
we can fully investigate the issue/benefit of the change.

Fixes: 7c451f3ef6 ("ibmvnic: remove duplicate napi_schedule call in open function")
Reported-by: Cristobal Forno <cforno12@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Sukadev Bhattiprolu
0ec13aff05 Revert "ibmvnic: simplify reset_long_term_buff function"
This reverts commit 1c7d45e7b2.

We tried to optimize the number of hcalls we send and skipped sending
the REQUEST_MAP calls for some maps. However during resets, we need to
resend all the maps to the VIOS since the VIOS does not remember the
old values. In fact we may have failed over to a new VIOS which will
not have any of the mappings.

When we send packets with map ids the VIOS does not know about, it
triggers a FATAL reset. While the client does recover from the FATAL
error reset, we are seeing a large number of such resets. Handling
FATAL resets is lot more unnecessary work than issuing a few more
hcalls so revert the commit and resend the maps to the VIOS.

Fixes: 1c7d45e7b2 ("ibmvnic: simplify reset_long_term_buff function")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:22:23 -07:00
Marcin Wojtas
c88c192dc3 net: mdiobus: fix fwnode_mdbiobus_register() fallback case
The fallback case of fwnode_mdbiobus_register()
(relevant for !CONFIG_FWNODE_MDIO) was defined with wrong
argument name, causing a compilation error. Fix that.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:19:20 -07:00
Jakub Kicinski
6d123b81ac net: ip: avoid OOM kills with large UDP sends over loopback
Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.

This is entirely avoidable, we can use an skb with page frags.

af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.

v4: pre-calculate all the additions to alloclen so
    we can be sure it won't go over order-2

Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:17:21 -07:00
Yixing Liu
7ae61c5f16 RDMA/hns: Add window selection field of congestion control
The window selection field is necessary for congestion control of HIP09,
it is got from firmware and then filled into QPC. Some algorithms need it
to decide whether to limit the number of windows.

Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1624364163-44185-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24 15:14:06 -03:00
Lorenz Bauer
ae24bab257 tools/testing: add a selftest for SO_NETNS_COOKIE
Make sure that SO_NETNS_COOKIE returns a non-zero value, and
that sockets from different namespaces have a distinct cookie
value.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:13:05 -07:00
Martynas Pumputis
e8b9eab992 net: retrieve netns cookie via getsocketopt
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.

Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.

Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE.  This is also in line in how we retrieve socket cookie
via SO_COOKIE.

  [1] https://kind.sigs.k8s.io/

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:13:05 -07:00
Ira Weiny
36f5625af3 RDMA/hfi1: Remove use of kmap()
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]

The kmap() used in sdma does not need to be global.  Use the new
kmap_local_page() which works with PKS and may provide better performance
for this thread local mapping anyway.

[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/

Link: https://lore.kernel.org/r/20210622061422.2633501-2-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24 15:07:08 -03:00
Ira Weiny
7364e74d48 RDMA/irdma: Remove use of kmap()
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]

The kmap() used in the irdma CM driver is thread local.  Therefore
kmap_local_page() is sufficient to use and may provide performance
benefits as well.  kmap_local_page() will work with device dax and pgmap
protected pages.

Use kmap_local_page() instead of kmap().

[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/

Link: https://lore.kernel.org/r/20210622165622.2638628-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24 15:07:01 -03:00
Jan Sokolowski
956e759d5f i40e: Fix missing rtnl locking when setting up pf switch
A recent change that made i40e use new udp_tunnel infrastructure
uses a method that expects to be called under rtnl lock.

However, not all codepaths do the lock prior to calling
i40e_setup_pf_switch.

Fix that by adding additional rtnl locking and unlocking.

Fixes: 40a98cb6f0 ("i40e: convert to new udp_tunnel infrastructure")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24 11:06:37 -07:00
Jesse Brandeburg
26b0ce8dd3 i40e: fix PTP on 5Gb links
As reported by Alex Sergeev, the i40e driver is incrementing the PTP
clock at 40Gb speeds when linked at 5Gb. Fix this bug by making
sure that the right multiplier is selected when linked at 5Gb.

Fixes: 3dbdd6c2f7 ("i40e: Add support for 5Gbps cards")
Cc: stable@vger.kernel.org
Reported-by: Alex Sergeev <asergeev@carbonrobotics.com>
Suggested-by: Alex Sergeev <asergeev@carbonrobotics.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24 11:06:28 -07:00
Christoph Hellwig
0384264ea8 block: pass a gendisk to bdev_disk_changed
bdev_disk_changed can only operate on whole devices.  Make that clear
by passing a gendisk instead of the struct block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 12:01:06 -06:00
Christoph Hellwig
630161cfdf block: move bdev_disk_changed
Move bdev_disk_changed to block/partitions/core.c, together with the
rest of the partition scanning code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 12:01:06 -06:00
Christoph Hellwig
2bc8cda5ea block: add the events* attributes to disk_attrs
Add the events attributes to the disk_attrs array, which ensures they are
added by the driver core when the device is created rather than adding
them after the device has been added, which is racy versus uevents and
requires more boilerplate code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210624073843.251178-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 12:00:22 -06:00
Christoph Hellwig
d5870edfa3 block: move the disk events code to a separate file
Move the code for handling disk events from genhd.c into a new file
as it isn't very related to the rest of the file while at the same
time requiring lots of forward declarations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210624073843.251178-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 12:00:22 -06:00