In a subsequent patch we'd like to have something like a strscpy_pad()
implementation usable in prom_init.c.
Currently we have a strcpy() implementation with only one caller, so
convert it into strscpy_pad() and update the caller.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621064938.2021419-1-mpe@ellerman.id.au
When using the Radix MMU our PGD is always 64K, and must be naturally
aligned.
For a 4K page size kernel that means page alignment of swapper_pg_dir is
not sufficient, leading to failure to boot.
Use the existing MAX_PTRS_PER_PGD which has the correct value, and
avoids us hard-coding 64K here.
Fixes: e72421a085 ("powerpc: Define swapper_pg_dir[] in C")
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210624123420.2784187-1-mpe@ellerman.id.au
Since we no longer modify gso_size, it is now theoretically
safe to not set SKB_GSO_DODGY and reset gso_segs to zero.
This also means the skb_is_gso_tcp() check should no longer
be necessary.
Unfortunately we cannot remove the skb_{decrease,increase}_gso_size()
helpers, as they are still used elsewhere:
bpf_skb_net_grow() without BPF_F_ADJ_ROOM_FIXED_GSO
bpf_skb_net_shrink() without BPF_F_ADJ_ROOM_FIXED_GSO
net/core/lwt_bpf.c's handle_gso_type()
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-3-zenczykowski@gmail.com
Use DEFINE_RES_MEM() to save a couple of lines of code, which makes the
code a bit shorter and easier to read. The start address does not need to
appear twice.
By the way, the value of '.end' should be "start + size - 1". So the
previous writing should have omitted subtracted 1.
Fixes: acf5e051ac ("MCB: add support for SC31 to mcb-lpc")
Fixes: 73edc8f7cc ("mcb: Added support for LPC or non PCI based MCB carrier")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210616073030.834-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
change made to resolve following checkpatch message:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its
function/variable
Signed-off-by: Jinchao Wang <wjc@cdjrlc.com>
Link: https://lore.kernel.org/r/20210624020929.49968-1-wjc@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting a page flag without holding a reference to the page
is living dangerously. In the tag-writing path, we drop the
reference to the page by calling kvm_release_pfn_dirty(),
and only then set the PG_mte_tagged bit.
It would be safer to do it the other way round.
Fixes: f0376edb1d ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87k0mjidwb.wl-maz@kernel.org
During system resume, MHI host triggers M3->M0 transition and then waits
for target device to enter M0 state. Once done, the device queues a state
change event into ctrl event ring and notifies MHI host by raising an
interrupt, where a tasklet is scheduled to process this event. In most
cases, the tasklet is served timely and wait operation succeeds.
However, there are cases where CPU is busy and cannot serve this tasklet
for some time. Once delay goes long enough, the device moves itself to M1
state and also interrupts MHI host after inserting a new state change
event to ctrl ring. Later when CPU finally has time to process the ring,
there will be two events:
1. For M3->M0 event, which is the first event to be processed queued first.
The tasklet handler serves the event, updates device state to M0 and
wakes up the task.
2. For M0->M1 event, which is processed later, the tasklet handler
triggers M1->M2 transition and updates device state to M2 directly,
then wakes up the MHI host (if it is still sleeping on this wait queue).
Note that although MHI host has been woken up while processing the first
event, it may still has no chance to run before the second event is
processed. In other words, MHI host has to keep waiting till timeout
causing the M0 state to be missed.
kernel log here:
...
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2
...
Fix this issue by simply adding M2 as a valid state for resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Cc: stable@vger.kernel.org
Fixes: 0c6b20a1d7 ("bus: mhi: core: Add support for MHI suspend and resume")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org
[mani: slightly massaged the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On graceful power-down/disable transition, when an MHI reset is
performed, the MHI device loses its context, including interrupt
configuration. However, the current implementation is waiting for
event(irq) driven state change to confirm reset has been completed,
which never happens, and causes reset timeout, leading to unexpected
high latency of the mhi_power_down procedure (up to 45 seconds).
Fix that by moving to the recently introduced poll_reg_field method,
waiting for the reset bit to be cleared, in the same way as the
power_on procedure.
Cc: stable@vger.kernel.org
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Link: https://lore.kernel.org/r/1620029090-8975-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices don't drain their pipelines if we don't make sure that
the corresponding output port is in reset before programming it for
a new trace capture, resulting in bits of old trace appearing in the
new trace capture. Fix that by explicitly making sure the reset is
asserted before programming new trace capture.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210621151246.31891-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We already keep the multiblock mode buffers uncached, but forget the
single mode. Address this.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210621151246.31891-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in the added comment device_for_each_child() never returns
a non-zero value. So remove the corresponding error check.
This simplifies the quest to make struct bus_type::remove() return void.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210621151246.31891-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the repeated word "the" in a comment.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[alexander.shishkin: fixed the commit message]
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210621151246.31891-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable Bus Master for the NE PCI device, according to the PCI spec
for submitting memory or I/O requests:
Master Enable – Controls the ability of a PCI Express
Endpoint to issue Memory and I/O Read/Write Requests, and
the ability of a Root or Switch Port to forward Memory and
I/O Read/Write Requests in the Upstream direction
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Alexandru Vasile <lexnv@amazon.com>
Cc: Alexandru Ciobotaru <alcioa@amazon.com>
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20210621004046.1419-1-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is technically a backwards incompatible change in behaviour, but I'm
going to argue that it is very unlikely to break things, and likely to fix
*far* more then it breaks.
In no particular order, various reasons follow:
(a) I've long had a bug assigned to myself to debug a super rare kernel crash
on Android Pixel phones which can (per stacktrace) be traced back to BPF clat
IPv6 to IPv4 protocol conversion causing some sort of ugly failure much later
on during transmit deep in the GSO engine, AFAICT precisely because of this
change to gso_size, though I've never been able to manually reproduce it. I
believe it may be related to the particular network offload support of attached
USB ethernet dongle being used for tethering off of an IPv6-only cellular
connection. The reason might be we end up with more segments than max permitted,
or with a GSO packet with only one segment... (either way we break some
assumption and hit a BUG_ON)
(b) There is no check that the gso_size is > 20 when reducing it by 20, so we
might end up with a negative (or underflowing) gso_size or a gso_size of 0.
This can't possibly be good. Indeed this is probably somehow exploitable (or
at least can result in a kernel crash) by delivering crafted packets and perhaps
triggering an infinite loop or a divide by zero... As a reminder: gso_size (MSS)
is related to MTU, but not directly derived from it: gso_size/MSS may be
significantly smaller then one would get by deriving from local MTU. And on
some NICs (which do loose MTU checking on receive, it may even potentially be
larger, for example my work pc with 1500 MTU can receive 1520 byte frames [and
sometimes does due to bugs in a vendor plat46 implementation]). Indeed even just
going from 21 to 1 is potentially problematic because it increases the number
of segments by a factor of 21 (think DoS, or some other crash due to too many
segments).
(c) It's always safe to not increase the gso_size, because it doesn't result in
the max packet size increasing. So the skb_increase_gso_size() call was always
unnecessary for correctness (and outright undesirable, see later). As such the
only part which is potentially dangerous (ie. could cause backwards compatibility
issues) is the removal of the skb_decrease_gso_size() call.
(d) If the packets are ultimately destined to the local device, then there is
absolutely no benefit to playing around with gso_size. It only matters if the
packets will egress the device. ie. we're either forwarding, or transmitting
from the device.
(e) This logic only triggers for packets which are GSO. It does not trigger for
skbs which are not GSO. It will not convert a non-GSO MTU sized packet into a
GSO packet (and you don't even know what the MTU is, so you can't even fix it).
As such your transmit path must *already* be able to handle an MTU 20 bytes
larger then your receive path (for IPv4 to IPv6 translation) - and indeed 28
bytes larger due to IPv4 fragments. Thus removing the skb_decrease_gso_size()
call doesn't actually increase the size of the packets your transmit side must
be able to handle. ie. to handle non-GSO max-MTU packets, the IPv4/IPv6 device/
route MTUs must already be set correctly. Since for example with an IPv4 egress
MTU of 1500, IPv4 to IPv6 translation will already build 1520 byte IPv6 frames,
so you need a 1520 byte device MTU. This means if your IPv6 device's egress
MTU is 1280, your IPv4 route must be 1260 (and actually 1252, because of the
need to handle fragments). This is to handle normal non-GSO packets. Thus the
reduction is simply not needed for GSO packets, because when they're correctly
built, they will already be the right size.
(f) TSO/GSO should be able to exactly undo GRO: the number of packets (TCP
segments) should not be modified, so that TCP's MSS counting works correctly
(this matters for congestion control). If protocol conversion changes the
gso_size, then the number of TCP segments may increase or decrease. Packet loss
after protocol conversion can result in partial loss of MSS segments that the
sender sent. How's the sending TCP stack going to react to receiving ACKs/SACKs
in the middle of the segments it sent?
(g) skb_{decrease,increase}_gso_size() are already no-ops for GSO_BY_FRAGS
case (besides triggering WARN_ON_ONCE). This means you already cannot guarantee
that gso_size (and thus resulting packet MTU) is changed. ie. you must assume
it won't be changed.
(h) changing gso_size is outright buggy for UDP GSO packets, where framing
matters (I believe that's also the case for SCTP, but it's already excluded
by [g]). So the only remaining case is TCP, which also doesn't want it
(see [f]).
(i) see also the reasoning on the previous attempt at fixing this
(commit fa7b83bf3b) which shows that the current
behaviour causes TCP packet loss:
In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.
bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.
tcp_gso_segment():
[...]
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss)) goto out;
[...]
Thus changing the gso_size is simply a very bad idea. Increasing is unnecessary
and buggy, and decreasing can go negative.
Fixes: 6578171a7f ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/CANP3RGfjLikQ6dg=YpBU0OeHvyv7JOki7CyOUS9modaXAi-9vQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210617000953.2787453-2-zenczykowski@gmail.com
Map them to KEY_MACRO# event codes.
These buttons are defined by HID as follows:
"The user defines the function of these buttons to control software applications or GUI objects."
This matches the semantics of the KEY_MACRO# input event codes that Linux supports.
Also add support for HID "Named Array" collections.
Also add hid-debug support for KEY_MACRO#.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Goes through all the drivers and deletes the default hook since it's
the default now.
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch
It's tedious to review this all the time, and my audit showed that
arcpgu actually forgot to set this.
Make this the default and stop worrying.
Again I sprinkled WARN_ON_ONCE on top to make sure we don't have
strange combinations of hooks: cleanup_fb without prepare_fb doesn't
make sense, and since simpler drivers are all new they better be GEM
based drivers.
v2: Warn and bail when it's _not_ a GEM driver (Noralf)
v3: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162456.3373469-1-daniel.vetter@ffwll.ch
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
This reverts commit fa7b83bf3b.
See the followup commit for the reasoning why I believe the appropriate
approach is to simply make this change without a flag, but it can basically
be summarized as using this helper without the flag is bug-prone or outright
buggy, and thus the default should be this new behaviour.
As this commit has only made it into net-next/master, but not into
any real release, such a backwards incompatible change is still ok.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-1-zenczykowski@gmail.com
Like we have for the shadow helpers too, and roll it out to drivers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
All they do is refcount the fb, which the atomic helpers already do.
This is was necessary with the legacy helpers and I guess just carry
over in the conversion. drm_plane_state always has a full reference
for its ->fb pointer during its entire lifetime,
see __drm_atomic_helper_plane_destroy_state()
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-10-daniel.vetter@ffwll.ch
There's a bunch of atomic drivers who don't do this quite correctly,
luckily most of them aren't in wide use or people would have noticed
the tearing.
By making this the default we avoid the constant audit pain and can
additionally remove a ton of lines from vfuncs for a bit more clarity
in smaller drivers.
While at it complain if there's a cleanup_fb hook but no prepare_fb
hook, because that makes no sense. I haven't found any driver which
violates this, but better safe than sorry.
Subsequent patches will reap the benefits.
v2: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162200.3372056-1-daniel.vetter@ffwll.ch
Docs for struct dma_resv are fairly clear:
"A reservation object can have attached one exclusive fence (normally
associated with write operations) or N shared fences (read
operations)."
https://dri.freedesktop.org/docs/drm/driver-api/dma-buf.html#reservation-objects
Furthermore a review across all of upstream.
First of render drivers and how they set implicit fences:
- nouveau follows this contract, see in validate_fini_no_ticket()
nouveau_bo_fence(nvbo, fence, !!b->write_domains);
and that last boolean controls whether the exclusive or shared fence
slot is used.
- radeon follows this contract by setting
p->relocs[i].tv.num_shared = !r->write_domain;
in radeon_cs_parser_relocs(), which ensures that the call to
ttm_eu_fence_buffer_objects() in radeon_cs_parser_fini() will do the
right thing.
- vmwgfx seems to follow this contract with the shotgun approach of
always setting ttm_val_buf->num_shared = 0, which means
ttm_eu_fence_buffer_objects() will only use the exclusive slot.
- etnaviv follows this contract, as can be trivially seen by looking
at submit_attach_object_fences()
- i915 is a bit a convoluted maze with multiple paths leading to
i915_vma_move_to_active(). Which sets the exclusive flag if
EXEC_OBJECT_WRITE is set. This can either come as a buffer flag for
softpin mode, or through the write_domain when using relocations. It
follows this contract.
- lima follows this contract, see lima_gem_submit() which sets the
exclusive fence when the LIMA_SUBMIT_BO_WRITE flag is set for that
bo
- msm follows this contract, see msm_gpu_submit() which sets the
exclusive flag when the MSM_SUBMIT_BO_WRITE is set for that buffer
- panfrost follows this contract with the shotgun approach of just
always setting the exclusive fence, see
panfrost_attach_object_fences(). Benefits of a single engine I guess
- v3d follows this contract with the same shotgun approach in
v3d_attach_fences_and_unlock_reservation(), but it has at least an
XXX comment that maybe this should be improved
- v4c uses the same shotgun approach of always setting an exclusive
fence, see vc4_update_bo_seqnos()
- vgem also follows this contract, see vgem_fence_attach_ioctl() and
the VGEM_FENCE_WRITE. This is used in some igts to validate prime
sharing with i915.ko without the need of a 2nd gpu
- vritio follows this contract again with the shotgun approach of
always setting an exclusive fence, see virtio_gpu_array_add_fence()
This covers the setting of the exclusive fences when writing.
Synchronizing against the exclusive fence is a lot more tricky, and I
only spot checked a few:
- i915 does it, with the optional EXEC_OBJECT_ASYNC to skip all
implicit dependencies (which is used by vulkan)
- etnaviv does this. Implicit dependencies are collected in
submit_fence_sync(), again with an opt-out flag
ETNA_SUBMIT_NO_IMPLICIT. These are then picked up in
etnaviv_sched_dependency which is the
drm_sched_backend_ops->dependency callback.
- v4c seems to not do much here, maybe gets away with it by not having
a scheduler and only a single engine. Since all newer broadcom chips than
the OG vc4 use v3d for rendering, which follows this contract, the
impact of this issue is fairly small.
- v3d does this using the drm_gem_fence_array_add_implicit() helper,
which then it's drm_sched_backend_ops->dependency callback
v3d_job_dependency() picks up.
- panfrost is nice here and tracks the implicit fences in
panfrost_job->implicit_fences, which again the
drm_sched_backend_ops->dependency callback panfrost_job_dependency()
picks up. It is mildly questionable though since it only picks up
exclusive fences in panfrost_acquire_object_fences(), but not buggy
in practice because it also always sets the exclusive fence. It
should pick up both sets of fences, just in case there's ever going
to be a 2nd gpu in a SoC with a mali gpu. Or maybe a mali SoC with a
pcie port and a real gpu, which might actually happen eventually. A
bug, but easy to fix. Should probably use the
drm_gem_fence_array_add_implicit() helper.
- lima is nice an easy, uses drm_gem_fence_array_add_implicit() and
the same schema as v3d.
- msm is mildly entertaining. It also supports MSM_SUBMIT_NO_IMPLICIT,
but because it doesn't use the drm/scheduler it handles fences from
the wrong context with a synchronous dma_fence_wait. See
submit_fence_sync() leading to msm_gem_sync_object(). Investing into
a scheduler might be a good idea.
- all the remaining drivers are ttm based, where I hope they do
appropriately obey implicit fences already. I didn't do the full
audit there because a) not follow the contract would confuse ttm
quite well and b) reading non-standard scheduler and submit code
which isn't based on drm/scheduler is a pain.
Onwards to the display side.
- Any driver using the drm_gem_plane_helper_prepare_fb() helper will
correctly. Overwhelmingly most drivers get this right, except a few
totally dont. I'll follow up with a patch to make this the default
and avoid a bunch of bugs.
- I didn't audit the ttm drivers, but given that dma_resv started
there I hope they get this right.
In conclusion this IS the contract, both as documented and
overwhelmingly implemented, specically as implemented by all render
drivers except amdgpu.
Amdgpu tried to fix this already in
commit 049aca4363
Author: Christian König <christian.koenig@amd.com>
Date: Wed Sep 19 16:54:35 2018 +0200
drm/amdgpu: fix using shared fence for exported BOs v2
but this fix falls short on a number of areas:
- It's racy, by the time the buffer is shared it might be too late. To
make sure there's definitely never a problem we need to set the
fences correctly for any buffer that's potentially exportable.
- It's breaking uapi, dma-buf fds support poll() and differentitiate
between, which was introduced in
commit 9b495a5887
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jul 1 12:57:43 2014 +0200
dma-buf: add poll support, v3
- Christian König wants to nack new uapi building further on this
dma_resv contract because it breaks amdgpu, quoting
"Yeah, and that is exactly the reason why I will NAK this uAPI change.
"This doesn't works for amdgpu at all for the reasons outlined above."
https://lore.kernel.org/dri-devel/f2eb6751-2f82-9b23-f57e-548de5b729de@gmail.com/
Rejecting new development because your own driver is broken and
violates established cross driver contracts and uapi is really not
how upstream works.
Now this patch will have a severe performance impact on anything that
runs on multiple engines. So we can't just merge it outright, but need
a bit a plan:
- amdgpu needs a proper uapi for handling implicit fencing. The funny
thing is that to do it correctly, implicit fencing must be treated
as a very strange IPC mechanism for transporting fences, where both
setting the fence and dependency intercepts must be handled
explicitly. Current best practices is a per-bo flag to indicate
writes, and a per-bo flag to to skip implicit fencing in the CS
ioctl as a new chunk.
- Since amdgpu has been shipping with broken behaviour we need an
opt-out flag from the butchered implicit fencing model to enable the
proper explicit implicit fencing model.
- for kernel memory fences due to bo moves at least the i915 idea is
to use ttm_bo->moving. amdgpu probably needs the same.
- since the current p2p dma-buf interface assumes the kernel memory
fence is in the exclusive dma_resv fence slot we need to add a new
fence slot for kernel fences, which must never be ignored. Since
currently only amdgpu supports this there's no real problem here
yet, until amdgpu gains a NO_IMPLICIT CS flag.
- New userspace needs to ship in enough desktop distros so that users
wont notice the perf impact. I think we can ignore LTS distros who
upgrade their kernels but not their mesa3d snapshot.
- Then when this is all in place we can merge this patch here.
What is not a solution to this problem here is trying to make the
dma_resv rules in the kernel more clever. The fundamental issue here
is that the amdgpu CS uapi is the least expressive one across all
drivers (only equalled by panfrost, which has an actual excuse) by not
allowing any userspace control over how implicit sync is conducted.
Until this is fixed it's completely pointless to make the kernel more
clever to improve amdgpu, because all we're doing is papering over
this uapi design issue. amdgpu needs to attain the status quo
established by other drivers first, once that's achieved we can tackle
the remaining issues in a consistent way across drivers.
v2: Bas pointed me at AMDGPU_GEM_CREATE_EXPLICIT_SYNC, which I
entirely missed.
This is great because it means the amdgpu specific piece for proper
implicit fence handling exists already, and that since a while. The
only thing that's now missing is
- fishing the implicit fences out of a shared object at the right time
- setting the exclusive implicit fence slot at the right time.
Jason has a patch series to fill that gap with a bunch of generic
ioctl on the dma-buf fd:
https://lore.kernel.org/dri-devel/20210520190007.534046-1-jason@jlekstrand.net/
v3: Since Christian has fixed amdgpu now in
commit 8c505bdc9c (drm-misc/drm-misc-next)
Author: Christian König <christian.koenig@amd.com>
Date: Wed Jun 9 13:51:36 2021 +0200
drm/amdgpu: rework dma_resv handling v3
Use the audit covered in this commit message as the excuse to update
the dma-buf docs around dma_buf.resv usage across drivers.
Since dynamic importers have different rules also hammer these in
again while we're at it.
v4:
- Add the missing "through the device" in the dynamic section that I
overlooked.
- Fix a kerneldoc markup mistake, the link didn't connect
v5:
- A few s/should/must/ to make clear what must be done (if the driver
does implicit sync) and what's more a maybe (Daniel Stone)
- drop all the example api discussion, that needs to be expanded,
clarified and put into a new chapter in drm-uapi.rst (Daniel Stone)
Cc: Daniel Stone <daniel@fooishbar.org>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dave Airlie <airlied@redhat.com> (v4)
Reviewed-by: Christian König <christian.koenig@amd.com> (v3)
Cc: mesa-dev@lists.freedesktop.org
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Kristian H. Kristensen <hoegsberg@google.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624125246.166721-1-daniel.vetter@ffwll.ch
Also review & update everything while we're at it.
This is prep work to smash a ton of stuff into the kerneldoc for
@resv.
v2: Move the doc for sysfs_entry.attachment_uid to the right place too
(Sam)
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210623161712.3370885-1-daniel.vetter@ffwll.ch
Add SLAB and page allocator tests for init_on_alloc. Testing for
init_on_free was already happening via the poisoning tests.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-10-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a handful of LKDTM-testable features that depend on certain CONFIGs
so that they are visible in logs for CI systems that run the selftests.
Others could be added, but may be seen as having too high a trade-off
for general testing.
Cc: kernelci@groups.io
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For various failure conditions, try to include some details about where
to look for reasons about the failure.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-8-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Where feasible, I prefer to have all tests visible on all architectures,
but to have them wired to XFAIL. DOUBLE_FAIL was set up to XFAIL, but
wasn't actually being added to the test list.
Fixes: cea23efb4d ("lkdtm/bugs: Make double-fault test always available")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-7-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to the existing slab overflow and stack exhaustion tests, add
VMALLOC_LINEAR_OVERFLOW (and rename the slab test SLAB_LINEAR_OVERFLOW).
Additionally unmarks the test as destructive. (It should be safe in the
face of misbehavior.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-6-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Freed memory poisoning can be tested a few ways, so update the expected
text to reflect the non-Oopsing alternative.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some environments do not set $SHELL when running tests. There's no
need to use $SHELL here anyway, since "cat" can be used to receive any
delivered signals from the kernel. Additionally avoid using bash-isms
in the command, and record stderr for posterity.
Fixes: 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
Cc: stable@vger.kernel.org
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.
Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Optimise SVE switching for CPUs with 128-bit implementations.
* for-next/sve:
arm64/sve: Skip flushing Z registers with 128 bit vectors
arm64/sve: Use the sve_flush macros in sve_load_from_fpsimd_state()
arm64/sve: Split _sve_flush macro into separate Z and predicate flushes
Add support for versions v1.2 and 1.3 of the SMC calling convention.
* for-next/smccc:
arm64: smccc: Support SMCCC v1.3 SVE register saving hint
arm64: smccc: Add support for SMCCCv1.2 extended input/output registers
Allow Pointer Authentication to be configured independently for kernel
and userspace.
* for-next/ptrauth:
arm64: Conditionally configure PTR_AUTH key of the kernel.
arm64: Add ARM64_PTR_AUTH_KERNEL config option
PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
* for-next/perf: (36 commits)
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: perf: Simplify EVENT ATTR macro in perf_event.c
drivers/perf: Simplify EVENT ATTR macro in fsl_imx8_ddr_perf.c
drivers/perf: Simplify EVENT ATTR macro in xgene_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l3_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l2_pmu.c
drivers/perf: Simplify EVENT ATTR macro in SMMU PMU driver
perf: Add EVENT_ATTR_ID to simplify event attributes
perf/smmuv3: Don't trample existing events with global filter
perf/hisi: Constify static attribute_group structs
perf: qcom: Remove redundant dev_err call in qcom_l3_cache_pmu_probe()
drivers/perf: hisi: Fix data source control
arm64: perf: Add more support on caps under sysfs
perf: qcom_l2_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
arm_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
perf: arm_spe: use DEVICE_ATTR_RO macro
perf: xgene_pmu: use DEVICE_ATTR_RO macro
perf: qcom: use DEVICE_ATTR_RO macro
perf: arm_pmu: use DEVICE_ATTR_RO macro
...
KASAN optimisations for the hardware tagging (MTE) implementation.
* for-next/mte:
kasan: disable freed user page poisoning with HW tags
arm64: mte: handle tags zeroing at page allocation time
kasan: use separate (un)poison implementation for integrated init
mm: arch: remove indirection level in alloc_zeroed_user_highpage_movable()
kasan: speed up mte_set_mem_tag_range