Commit graph

1,044,825 commits

Author SHA1 Message Date
Bart Van Assche
5f6776ba41 block/Kconfig: Make the BLK_WBT and BLK_WBT_MQ entries consecutive
These entries were consecutive at the time of their introduction but are no
longer consecutive. Make these again consecutive. Additionally, modify the
help text since it refers to blk-mq and since the legacy block layer has
been removed.

Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20210618004456.7280-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-21 15:03:40 -06:00
Pablo Neira Ayuso
ea45fdf82c netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic
The VLAN transfer logic should actually check for
FLOW_DISSECTOR_KEY_BASIC, not FLOW_DISSECTOR_KEY_CONTROL. Moreover, do
not fallback to case 2) .n_proto is set to 802.1q or 802.1ad, if
FLOW_DISSECTOR_KEY_BASIC is unset.

Fixes: 783003f3bb ("netfilter: nftables_offload: special ethertype handling for VLAN")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-21 22:26:19 +02:00
Jeff Layton
827a746f40 netfs: fix test for whether we can skip read when writing beyond EOF
It's not sufficient to skip reading when the pos is beyond the EOF.
There may be data at the head of the page that we need to fill in
before the write.

Add a new helper function that corrects and clarifies the logic of
when we can skip reads, and have it only zero out the part of the page
that won't have data copied in for the write.

Finally, don't set the page Uptodate after zeroing. It's not up to date
since the write data won't have been copied in yet.

[DH made the following changes:

 - Prefixed the new function with "netfs_".

 - Don't call zero_user_segments() for a full-page write.

 - Altered the beyond-last-page check to avoid a DIV instruction and got
   rid of then-redundant zero-length file check.
]

Fixes: e1b1240c1f ("netfs: Add write_begin helper")
Reported-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20210613233345.113565-1-jlayton@kernel.org/
Link: https://lore.kernel.org/r/162367683365.460125.4467036947364047314.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162391826758.1173366.11794946719301590013.stgit@warthog.procyon.org.uk/ # v2
2021-06-21 21:24:07 +01:00
Pablo Neira Ayuso
3c5e446220 netfilter: nf_tables: memleak in hw offload abort path
Release flow from the abort path, this is easy to reproduce since
b72920f6e4 ("netfilter: nftables: counter hardware offload support").
If the preparation phase fails, then the abort path is exercised without
releasing the flow rule object.

unreferenced object 0xffff8881f0fa7700 (size 128):
  comm "nft", pid 1335, jiffies 4294931120 (age 4163.740s)
  hex dump (first 32 bytes):
    08 e4 de 13 82 88 ff ff 98 e4 de 13 82 88 ff ff  ................
    48 e4 de 13 82 88 ff ff 01 00 00 00 00 00 00 00  H...............
  backtrace:
    [<00000000634547e7>] flow_rule_alloc+0x26/0x80
    [<00000000c8426156>] nft_flow_rule_create+0xc9/0x3f0 [nf_tables]
    [<0000000075ff8e46>] nf_tables_newrule+0xc79/0x10a0 [nf_tables]
    [<00000000ba65e40e>] nfnetlink_rcv_batch+0xaac/0xf90 [nfnetlink]
    [<00000000505c614a>] nfnetlink_rcv+0x1bb/0x1f0 [nfnetlink]
    [<00000000eb78e1fe>] netlink_unicast+0x34b/0x480
    [<00000000a8f72c94>] netlink_sendmsg+0x3af/0x690
    [<000000009cb1ddf4>] sock_sendmsg+0x96/0xa0
    [<0000000039d06e44>] ____sys_sendmsg+0x3fe/0x440
    [<00000000137e82ca>] ___sys_sendmsg+0xd8/0x140
    [<000000000c6bf6a6>] __sys_sendmsg+0xb3/0x130
    [<0000000043bd6268>] do_syscall_64+0x40/0xb0
    [<00000000afdebc2d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Remove flow rule release from the offload commit path, otherwise error
from the offload commit phase might trigger a double-free due to the
execution of the abort_offload -> abort. After this patch, the abort
path takes care of releasing the flow rule.

This fix also needs to move the nft_flow_rule_create() call before the
transaction object is added otherwise the abort path might find a NULL
pointer to the flow rule object for the NFT_CHAIN_HW_OFFLOAD case.

While at it, rename BASIC-like goto tags to slightly more meaningful
names rather than adding a new "err3" tag.

Fixes: 63b48c73ff ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-21 22:23:38 +02:00
David Howells
66e9c6a86b afs: Fix afs_write_end() to handle short writes
Fix afs_write_end() to correctly handle a short copy into the intended
write region of the page.  Two things are necessary:

 (1) If the page is not up to date, then we should just return 0
     (ie. indicating a zero-length copy).  The loop in
     generic_perform_write() will go around again, possibly breaking up the
     iterator into discrete chunks[1].

     This is analogous to commit b9de313cf0
     for ceph.

 (2) The page should not have been set uptodate if it wasn't completely set
     up by netfs_write_begin() (this will be fixed in the next patch), so
     we need to set uptodate here in such a case.

Also remove the assertion that was checking that the page was set uptodate
since it's now set uptodate if it wasn't already a few lines above.  The
assertion was from when uptodate was set elsewhere.

Changes:
v3: Remove the handling of len exceeding the end of the page.

Fixes: 3003bbd069 ("afs: Use the netfs_write_begin() helper")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YMwVp268KTzTf8cN@zeniv-ca.linux.org.uk/ [1]
Link: https://lore.kernel.org/r/162367682522.460125.5652091227576721609.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162391825688.1173366.3437507255136307904.stgit@warthog.procyon.org.uk/ # v2
2021-06-21 21:23:36 +01:00
Mikulas Patocka
867de40c4c dm writecache: write at least 4k when committing
SSDs perform badly with sub-4k writes (because they perfrorm
read-modify-write internally), so make sure writecache writes at least
4k when committing.

Fixes: 991bd8d7bc ("dm writecache: commit just one block, not a full page")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-06-21 16:15:10 -04:00
Dan Carpenter
24610ed80d netfilter: nfnetlink_hook: fix check for snprintf() overflow
The kernel version of snprintf() can't return negatives.  The
"ret > (int)sizeof(sym)" check is off by one because and it should be
>=.  Finally, we need to set a negative error code.

Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-21 22:05:29 +02:00
Rob Herring
972d6a7dce dt-bindings: Drop redundant minItems/maxItems
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.

This condition is partially checked with the meta-schema already, but
only if both 'minItems' and 'maxItems' are equal to the 'items' length.
An improved meta-schema is pending.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for MMC
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210615191543.1043414-1-robh@kernel.org
2021-06-21 13:56:46 -06:00
Rob Herring
dc4014752e dt-bindings: spmi: Correct 'reg' schema
'reg' is defined to be N address entries of M cells each. For SPMI, N is 1
and M is 1 or 2. The schema fails to define the number of entries as it
only specifies the inner cell(s). To fix, add an outer items list with 1
entry.

Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210615172024.856360-1-robh@kernel.org
2021-06-21 13:56:46 -06:00
Dmitry Osipenko
67a066b357 of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
The reserved-memory Kconfig could be disabled when drivers are
compile-tested. In this case RESERVEDMEM_OF_DECLARE() produces a
noisy warning about the orphaned __reservedmem_of_table section.
Add the missing stub that fixes the warning. In particular this is
needed for compile-testing of NVIDIA Tegra210 memory driver which
uses reserved-memory.

Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210610162313.20942-1-digetx@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-06-21 13:56:46 -06:00
Sean Anderson
89f8a707d0 dt-bindings: clk: vc5: Fix example
The example properties do not match the binding. Fix them, and prohibit
undocumented properties in clock nodes to prevent this from happening in
the future.

Fixes: 45c940184b ("dt-bindings: clk: versaclock5: convert to yaml")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20210607190546.2616259-1-sean.anderson@seco.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-06-21 13:56:01 -06:00
David S. Miller
6ff5f8135a Merge branch 'dsa-cross-chip'
Vladimir Oltean says:

====================
Improvement for DSA cross-chip setups

This series improves some aspects in multi-switch DSA tree topologies:
- better device tree validation
- better handling of MTU changes
- better handling of multicast addresses
- removal of some unused code
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
f9bcdc362c net: dsa: remove cross-chip support from the MRP notifiers
With MRP hardware assist being supported only by the ocelot switch
family, which by design does not support cross-chip bridging, the
current match functions are at best a guess and have not been confirmed
in any way to do anything relevant in a multi-switch topology.

Drop the code and make the notifiers match only on the targeted switch
port.

Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
88faba20e2 net: dsa: targeted MTU notifiers should only match on one port
dsa_slave_change_mtu() calls dsa_port_mtu_change() twice:
- it sends a cross-chip notifier with the MTU of the CPU port which is
  used to update the DSA links.
- it sends one targeted MTU notifier which is supposed to only match the
  user port on which we are changing the MTU. The "propagate_upstream"
  variable is used here to bypass the cross-chip notifier system from
  switch.c

But due to a mistake, the second, targeted notifier matches not only on
the user port, but also on the DSA link which is a member of the same
switch, if that exists.

And because the DSA links of the entire dst were programmed in a
previous round to the largest_mtu via a "propagate_upstream == true"
notification, then the dsa_port_mtu_change(propagate_upstream == false)
call that is immediately upcoming will break the MTU on the one DSA link
which is chip-wise local to the dp whose MTU is changing right now.

Example given this daisy chain topology:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  cpu  ] [  user ] [  user ] [  dsa  ] [  user ]
[   x   ] [       ] [       ] [   x   ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

ip link set sw0p1 mtu 9000
ip link set sw1p1 mtu 9000 # at this stage, sw0p1 and sw1p1 can talk
                           # to one another using jumbo frames
ip link set sw0p2 mtu 1500 # this programs the sw0p3 DSA link first to
                           # the largest_mtu of 9000, then reprograms it to
                           # 1500 with the "propagate_upstream == false"
                           # notifier, breaking communication between
                           # sw0p1 and sw1p1

To escape from this situation, make the targeted match really match on a
single port - the user port, and rename the "propagate_upstream"
variable to "targeted_match" to clarify the intention and avoid future
issues.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
4e4ab79500 net: dsa: calculate the largest_mtu across all ports in the tree
If we have a cross-chip topology like this:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  cpu  ] [  user ] [  user ] [  dsa  ] [  user ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]

and we issue the following commands:

1. ip link set sw0p1 mtu 1700
2. ip link set sw1p1 mtu 1600

we notice the following happening:

Command 1. emits a non-targeted MTU notifier for the CPU port (sw0p0)
with the largest_mtu calculated across switch 0, of 1700. This matches
sw0p0, sw0p3 and sw1p4 (all CPU ports and DSA links).
Then, it emits a targeted MTU notifier for the user port (sw0p1), again
with MTU 1700 (this doesn't matter).

Command 2. emits a non-targeted MTU notifier for the CPU port (sw0p0)
with the largest_mtu calculated across switch 1, of 1600. This matches
the same group of ports as above, and decreases the MTU for the CPU port
and the DSA links from 1700 to 1600.

As a result, the sw0p1 user port can no longer communicate with its CPU
port at MTU 1700.

To address this, we should calculate the largest_mtu across all switches
that may share a CPU port, and only emit MTU notifiers with that value.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
abd49535c3 net: dsa: execute dsa_switch_mdb_add only for routing port in cross-chip topologies
Currently, the notifier for adding a multicast MAC address matches on
the targeted port and on all DSA links in the system, be they upstream
or downstream links.

This leads to a considerable amount of useless traffic.

Consider this daisy chain topology, and a MDB add notifier emitted on
sw0p0. It matches on sw0p0, sw0p3, sw1p3 and sw2p4.

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  user ] [  user ] [  user ] [  dsa  ] [  cpu  ]
[   x   ] [       ] [       ] [   x   ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [   x   ] [   x   ]
                                  |
                                  +---------+
                                            |
   sw2p0     sw2p1     sw2p2     sw2p3     sw2p4
[  user ] [  user ] [  user ] [  user ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

But switch 0 has no reason to send the multicast traffic for that MAC
address on sw0p3, which is how it reaches switches 1 and 2. Those
switches don't expect, according to the user configuration, to receive
this multicast address from switch 1, and they will drop it anyway,
because the only valid destination is the port they received it on.
They only need to configure themselves to deliver that multicast address
_towards_ switch 1, where the MDB entry is installed.

Similarly, switch 1 should not send this multicast traffic towards
sw1p3, because that is how it reaches switch 2.

With this change, the heat map for this MDB notifier changes as follows:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  user ] [  user ] [  user ] [  dsa  ] [  cpu  ]
[   x   ] [       ] [       ] [       ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]
                                  |
                                  +---------+
                                            |
   sw2p0     sw2p1     sw2p2     sw2p3     sw2p4
[  user ] [  user ] [  user ] [  user ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

Now the mdb notifier behaves the same as the fdb notifier.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
a8986681cc net: dsa: export the dsa_port_is_{user,cpu,dsa} helpers
The difference between dsa_is_user_port and dsa_port_is_user is that the
former needs to look up the list of ports of the DSA switch tree in
order to find the struct dsa_port, while the latter directly receives it
as an argument.

dsa_is_user_port is already in widespread use and has its place, so
there isn't any chance of converting all callers to a single form.
But being able to do:
	dsa_port_is_user(dp)
instead of
	dsa_is_user_port(dp->ds, dp->index)

is much more efficient too, especially when the "dp" comes from an
iterator over the DSA switch tree - this reduces the complexity from
quadratic to linear.

Move these helpers from dsa2.c to include/net/dsa.h so that others can
use them too.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Vladimir Oltean
8674f8d310 net: dsa: assert uniqueness of dsa,member properties
The cross-chip notifiers work by comparing each ds->index against the
info->sw_index value from the notifier. The ds->index is retrieved from
the device tree dsa,member property.

If a single tree cross-chip topology does not declare unique switch IDs,
this will result in hard-to-debug issues/voodoo effects such as the
cross-chip notifier for one switch port also matching the port with the
same number from another switch.

Check in dsa_switch_parse_member_of() whether the DSA switch tree
contains a DSA switch with the index we're preparing to add, before
actually adding it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:50:20 -07:00
Kees Cook
c88e2647c5 drm/i915/display: Do not zero past infoframes.vsc
intel_dp_vsc_sdp_unpack() was using a memset() size (36, struct dp_sdp)
larger than the destination (24, struct drm_dp_vsc_sdp), clobbering
fields in struct intel_crtc_state after infoframes.vsc. Use the actual
target size for the memset().

Fixes: 1b404b7dbb ("drm/i915/dp: Read out DP SDPs")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617213301.1824728-1-keescook@chromium.org
2021-06-21 12:39:36 -07:00
Jakub Kicinski
d452d48b9f tls: prevent oversized sendfile() hangs by ignoring MSG_MORE
We got multiple reports that multi_chunk_sendfile test
case from tls selftest fails. This was sort of expected,
as the original fix was never applied (see it in the first
Link:). The test in question uses sendfile() with count
larger than the size of the underlying file. This will
make splice set MSG_MORE on all sendpage calls, meaning
TLS will never close and flush the last partial record.

Eric seem to have addressed a similar problem in
commit 35f9c09fe9 ("tcp: tcp_sendpages() should call tcp_push() once")
by introducing MSG_SENDPAGE_NOTLAST. Unlike MSG_MORE
MSG_SENDPAGE_NOTLAST is not set on the last call
of a "pipefull" of data (PIPE_DEF_BUFFERS == 16,
so every 16 pages or whenever we run out of data).

Having a break every 16 pages should be fine, TLS
can pack exactly 4 pages into a record, so for
aligned reads there should be no difference,
unaligned may see one extra record per sendpage().

Sticking to TCP semantics seems preferable to modifying
splice, but we can revisit it if real life scenarios
show a regression.

Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/netdev/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:39:08 -07:00
Peng Li
41505d3f0f net: c101: remove redundant spaces
According to the chackpatch.pl, no space before tabs.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:37:28 -07:00
Peng Li
7774318b9e net: c101: replace comparison to NULL with "!card"
According to the chackpatch.pl, comparison to NULL could
be written "!card".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:37:28 -07:00
Peng Li
4f7d2247f8 net: c101: add blank line after declarations
This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:37:28 -07:00
David S. Miller
c3dcb4b6c4 Merge branch 'mlxsw-eeprom-page-by-page'
Ido Schimmel says:

====================
mlxsw: Add support for module EEPROM read by page

Add support for ethtool_ops::get_module_eeprom_by_page() operation.

Patch #1 adds necessary field in device register.

Patch #2 documents possible MCIA status values so that more meaningful
error messages could be returned to user space via extack.

Patch #3 adds the actual implementation.
===================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:33:05 -07:00
Ido Schimmel
1e27b9e408 mlxsw: core: Add support for module EEPROM read by page
Add support for ethtool_ops::get_module_eeprom_by_page() which allows
user space to read transceiver module EEPROM based on passed parameters.

The I2C address is not validated in order to avoid module-specific code.
In case of wrong address, error will be returned from device's firmware.

Tested by comparing output with legacy method (ioctl) output.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:33:05 -07:00
Ido Schimmel
cecefb3a6e mlxsw: reg: Document possible MCIA status values
Will be used to emit meaningful messages to user space via extack in a
subsequent patch.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:33:04 -07:00
Ido Schimmel
d51ea60e01 mlxsw: reg: Add bank number to MCIA register
Add bank number to MCIA (Management Cable Info Access) register in order
to allow access to banked pages on EEPROMs using CMIS (Common Management
Interface Specification) memory map.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:33:04 -07:00
David S. Miller
63d66ec924 Merge branch 'ipa-v3.1'
Alex Elder says:

====================
net: ipa: add support for IPA v3.1

This series adds support for IPA v3.1, used by the Qualcomm
Snapdragon 835 (MSM8998).

The first patch adds "qcom,msm8998-ipa" to the DT binding.

The next four patches add code to ensure correct operation on
IPA v3.1:
  - Avoid touching unsupported inter-EE interrupt mask registers
  - Set the proper flags in the clock configuration register
  - Work around the lack of an IPA FLAVOR_0 register
  - Work around the lack of a GSI PARAM_2 register

The last patch defines configuration data for this version of IPA.

Many thanks are due to AngeloGioacchino Del Regno and Jami Kettunen,
both associated with SoMainline.  Angelo first posted code to
implement most of what was required for this, and Jami has been
helpful testing these changes on his hardware.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:31:00 -07:00
Alex Elder
1bb1a11787 net: ipa: add IPA v3.1 configuration data
Add support for the MSM8998 SoC, which includes IPA version 3.1.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-6-angelogioacchino.delregno@somainline.org
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:31:00 -07:00
Alex Elder
bae70a803a net: ipa: introduce gsi_ring_setup()
Prior to IPA v3.5.1, there is no HW_PARAM_2 GSI register, which we
use to determine the number of channels and endpoints per execution
environment.  In that case, we will just assume the number supported
is the maximum supported by the driver.

Introduce gsi_ring_setup() to encapsulate the code that determines
the number of channels and endpoints.

Update GSI_EVT_RING_COUNT_MAX so it is big enough to handle any
available channel for all supported hardware (IPA v4.9 can have 23
channels and 24 event rings).

Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:30:59 -07:00
Alex Elder
110971d1ee net: ipa: FLAVOR_0 register doesn't exist until IPA v3.5
The FLAVOR_0 version first appears in IPA v3.5, so avoid attempting
to read it for versions prior to that.

This register contains a concise definition of the number and
direction of endpoints supported by the hardware, and without it
we can't verify endpoint configuration in ipa_endpoint_config().
In this case, just indicate that any endpoint number is available
for use.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:30:59 -07:00
Alex Elder
3833d0abd2 net: ipa: disable misc clock gating for IPA v3.1
For IPA v3.1, a workaround is needed to disable gating on a MISC
clock.  I have no further explanation, but this is what the
downstream code (msm-4.4) does.

This was suggested in a patch from AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:30:59 -07:00
Alex Elder
c31d73494f net: ipa: inter-EE interrupts aren't always available
The GSI inter-EE interrupts are not supported prior to IPA v3.5.
Don't attempt to initialize them in gsi_irq_setup() for hardware
that does not support them.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-4-angelogioacchino.delregno@somainline.org
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:30:59 -07:00
Alex Elder
2afd6c8b43 dt-bindings: net: qcom,ipa: add support for MSM8998
Add support for "qcom,msm8998-ipa", which uses IPA v3.1.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/linux-arm-msm/20210211175015.200772-8-angelogioacchino.delregno@somainline.org
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:30:59 -07:00
Al Viro
be752283a2 __unix_find_socket_byname(): don't pass hash and type separately
We only care about exclusive or of those, so pass that directly.
Makes life simpler for callers as well...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
c0c3b8d380 unix_bind_bsd(): unlink if we fail after successful mknod
We can do that more or less safely, since the parent is
held locked all along.  Yes, somebody might observe the
object via dcache, only to have it disappear afterwards,
but there's really no good way to prevent that.  It won't
race with other bind(2) or attempts to move the sucker
elsewhere, or put something else in its place - locked
parent prevents that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
56c1731b28 unix_bind_bsd(): move done_path_create() call after dealing with ->bindlock
Final preparations for doing unlink on failure past the successful
mknod.  We can't hold ->bindlock over ->mknod() or ->unlink(), since
either might do sb_start_write() (e.g. on overlayfs).  However, we
can do it while holding filesystem and VFS locks - doing
	kern_path_create()
	vfs_mknod()
	grab ->bindlock
	if u->addr had been set
		drop ->bindlock
		done_path_create
		return -EINVAL
	else
		assign the address to socket
		drop ->bindlock
		done_path_create
		return 0
would be deadlock-free.  Here we massage unix_bind_bsd() to that
form.  We are still doing equivalent transformations.

Next commit will *not* be an equivalent transformation - it will
add a call of vfs_unlink() before done_path_create() in "alread bound"
case.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
71e6be6f7d fold unix_mknod() into unix_bind_bsd()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
fa42d910a3 unix_bind(): take BSD and abstract address cases into new helpers
unix_bind_bsd() and unix_bind_abstract() respectively.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
aee5151705 unix_bind(): separate BSD and abstract cases
We do get some duplication that way, but it's minor compared to
parts that are different.  What we get is an ability to change
locking in BSD case without making failure exits very hard to
follow.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
c34d458251 unix_bind(): allocate addr earlier
makes it easier to massage; we do pay for that by extra work
(kmalloc+memcpy+kfree) in some error cases, but those are not
on the hot paths anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
Al Viro
185ab886d3 af_unix: take address assignment/hash insertion into a new helper
Duplicated logics in all bind variants (autobind, bind-to-path,
bind-to-abstract) gets taken into a common helper.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:28:49 -07:00
David S. Miller
d52f9b22d5 linux-can-fixes-for-5.13-20210619
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmDOZ38THG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqf9CCACcVoZsa+47buGmvQmRpyhbA+/a3LFF
 h5kBpts+igtZ2HnB5ODSu+SeqphYtE+eJeLLxbaw8riig0Vz+ogNJUMoalodYIwx
 B1jUTKYHg6wxDq6cAqZrG2KpOdIucXEFcugccPF0tjRthet0vZyWxbx66XWzFrp8
 +UGK5H/diGihaRqguJwN3P9Mw3SYw4VWo2J2iYQ8WkGT1sy1UO4XuO9U6KqNBHmA
 3a48VrgtwC4yZI7+Ar36SNMnL9P3qArE6UlqtpYDudmqpSCX08A4itM5rJ4UGSKk
 PwetFCvjhjsxFs081ILaBe2Ktu3fl3i+FsZF/hwv99p45l4OCaYBEwfw
 =xYM1
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.13-20210619' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-06-19

this is a pull request of 5 patches for net/master.

The first patch is by Thadeu Lima de Souza Cascardo and fixes a
potential use-after-free in the CAN broadcast manager socket, by
delaying the release of struct bcm_op after synchronize_rcu().

Oliver Hartkopp's patch fixes a similar potential user-after-free in
the CAN gateway socket by synchronizing RCU operations before removing
gw job entry.

Another patch by Oliver Hartkopp fixes a potential use-after-free in
the ISOTP socket by omitting unintended hrtimer restarts on socket
release.

Oleksij Rempel's patch for the j1939 socket fixes a potential
use-after-free by setting the SOCK_RCU_FREE flag on the socket.

The last patch is by Pavel Skripkin and fixes a use-after-free in the
ems_usb CAN driver.

All patches are intended for stable and have stable@v.k.o on Cc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:23:49 -07:00
David S. Miller
0d98ec879d wireless-drivers fixes for v5.13
Only one important fix for an mwifiex regression.
 
 mwifiex
 
 * fix deadlock during rmmod or firmware reset, regression from
   cfg80211 RTNL changes in v5.12-rc1
 -----BEGIN PGP SIGNATURE-----
 
 iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmDOEp8VHGt2YWxvQGNv
 ZGVhdXJvcmEub3JnAAoJEG4XJFUm622bnqgIAI0PL/+2jNY6q6aJ8QK0PEYThDJH
 CoWwb5JktkbqNq1nco/c7EqEKPq8TLyP3/SGhfZuiPcp2J+OlztHP3dMbQzm9du8
 6rDGf/g7ZVY20GHr1rtZDNnRct054Vx/I1UMF4vMZdk2BCXrkycgvCfK5Rqg/2RU
 5pA5c9/ZOguWDAbOEMAP+/G6bHFlpy1nasT5jNuYswjZJ28zgkWJKRi1QQFoe5Qn
 y8TYGNCdwI4Jf93zTiiH5sJ9sFqjpMz04L9nMoEzCodgMKXAnMmqr0YjcWqxpagt
 DeU80Bo189pw7CkeOEPhC75l2LM/N6llFINAAD69miPQGiyzJGZwUtxhMPE=
 =rpHP
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.13

Only one important fix for an mwifiex regression.

mwifiex

* fix deadlock during rmmod or firmware reset, regression from
  cfg80211 RTNL changes in v5.12-rc1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:21:46 -07:00
Dan Carpenter
43c9a81116 nfp: flower-ct: check for error in nfp_fl_ct_offload_nft_flow()
The nfp_fl_ct_add_flow() function can fail so we need to check for
failure.

Fixes: 95255017e0 ("nfp: flower-ct: add nft flows to nft list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:20:02 -07:00
Dan Carpenter
753ba09aa3 net: qualcomm: rmnet: fix two pointer math bugs
We recently changed these two pointers from void pointers to struct
pointers and it breaks the pointer math so now the "txphdr" points
beyond the end of the buffer.

Fixes: 56a967c4f7 ("net: qualcomm: rmnet: Remove some unneeded casts")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:19:19 -07:00
Dan Carpenter
d5fff4629b net: iosm: remove an unnecessary NULL check
The address of &ipc_mux->ul_adb can't be NULL because it points to the
middle of a non-NULL struct.

Fixes: 9413491e20 ("net: iosm: encode or decode datagram")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:17:55 -07:00
Dan Carpenter
1a1100d53f net/smc: Fix ENODATA tests in smc_nl_get_fback_stats()
These functions return negative ENODATA but the minus sign was left out
in the tests.

Fixes: f0dd7bf5e3 ("net/smc: Add netlink support for SMC fallback statistics")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:16:58 -07:00
Dan Carpenter
956c3ae411 net: hns3: fix a double shift bug
These flags are used to set and test bits like this:

	if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) ||

The issue is that test_bit() takes a bit number like 1, but we are
passing BIT(1) instead and it's testing BIT(BIT(1)).  This does not
cause a problem because it is always done consistently and the bit
values are very small.

Fixes: 0bf5eb7885 ("net: hns3: add support for PTP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:14:11 -07:00
Dan Carpenter
faebad8534 net: hns3: fix different snprintf() limit
This patch doesn't affect runtime at all, it's just a correctness issue.

The ptp->info.name[] buffer has 16 characters but the snprintf() limit
was capped at 32 characters.  Fortunately, HCLGE_DRIVER_NAME is "hclge"
which isn't close to 16 characters so we're fine.

Fixes: 0bf5eb7885 ("net: hns3: add support for PTP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 12:14:11 -07:00