Commit graph

1,044,825 commits

Author SHA1 Message Date
Konrad Dybcio
f0cedfc398 arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
Enabling the hardware thankfully comes down to a simple status = "okay".
We assume that the firmware is provided by the Linux distribution, as it's
signed and needs to come from the stock Android.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:42:32 -05:00
Konrad Dybcio
db92d8cdde arm64: dts: qcom: sm8250-edo: Enable PCIe
Enable PCIe0 (Wi-Fi) and 2 (SDX55m) interfaces and PHYs and assign relevant
pins and regulators.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:42:25 -05:00
Konrad Dybcio
13e948a36d arm64: dts: qcom: sm8250: Commonize PCIe pins
Commonize PCIe pins, as the configuration is SoC-common
and doesn't change (or at least doesn't change much) between
boards.

While at it, remove "output-low" from the RB5 board, as it's
not necessary - we already explicitly pull the perst pin low.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:41:55 -05:00
Linus Torvalds
e2c8f8e57b USB fixes for 5.13-rc7
Here are 3 small USB fixes for reported problems for 5.13-rc7.  They
 include:
 	- disabling autosuspend for a cypress USB hub
 	- fixing the battery charger detection for the chipidea driver
 	- fixing a kernel panic in the dwc3 driver due to a previous
 	  change in 5.13-rc1.
 
 All have been in linux-next with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMx2AQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynxzwCfT3l+Po09jA4gzoM0O0A1UtnodGUAnA8ZoNLv
 wNIq8x2ioaPtQT17k1W1
 =/Sfd
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are three small USB fixes for reported problems for 5.13-rc7.
  They include:

   - disable autosuspend for a cypress USB hub

   - fix the battery charger detection for the chipidea driver

   - fix a kernel panic in the dwc3 driver due to a previous change in
     5.13-rc1.

  All have been in linux-next with no reported problems"

* tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: core: hub: Disable autosuspend for Cypress CY7C65632
  usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
  usb: dwc3: core: fix kernel panic when do reboot
2021-06-18 10:39:32 -07:00
Konrad Dybcio
46e14907c7 arm64: dts: qcom: sm8250-edo: Add hardware keys
Volume Down, GAssist (pdx206 only) and camera keys live on PMIC pins,
with the latter kind being broken for now.. Add these and PON-connected
Volume Up & PWR.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616122708.144770-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:39:22 -05:00
Jonathan Corbet
98cf495184 Merge branch 'path-lookup' into docs-next
From Fox Chen:

  The Path lookup is a very complex subject in VFS. The path-lookup
  document provides a very detailed guidance to help people understand how
  path lookup works in the kernel. This document was originally written
  based on three lwn articles five years ago. As times goes by, some of the
  content is outdated. This patchset is intended to update the document to
  make it more relevant to current codebase.
2021-06-18 11:37:35 -06:00
Bhupesh Sharma
5b85e8f222 arm64: dts: qcom: sa8155p-adp: Add base dts file
Add base DTS file for SA8155p Automotive Development Platform.
It enables boot to console, adds tlmm reserved range and ufs flash.
It also includes pmic file.

SA8155p-adp board is based on sa8155p Qualcomm Snapdragon SoC.
SA8155p platform is similar to the SM8150, so use this as base
for now.

Cc: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617054548.353293-6-bhupesh.sharma@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:37:26 -05:00
Fan Du
28e5e44aa3 x86/mm: Avoid truncating memblocks for SGX memory
tl;dr:

Several SGX users reported seeing the following message on NUMA systems:

  sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.

This turned out to be the memblock code mistakenly throwing away SGX
memory.

=== Full Changelog ===

The 'max_pfn' variable represents the highest known RAM address.  It can
be used, for instance, to quickly determine for which physical addresses
there is mem_map[] space allocated.  The numa_meminfo code makes an
effort to throw out ("trim") all memory blocks which are above 'max_pfn'.

SGX memory is not considered RAM (it is marked as "Reserved" in the
e820) and is not taken into account by max_pfn. Despite this, SGX memory
areas have NUMA affinity and are enumerated in the ACPI SRAT table. The
existing SGX code uses the numa_meminfo mechanism to look up the NUMA
affinity for its memory areas.

In cases where SGX memory was above max_pfn (usually just the one EPC
section in the last highest NUMA node), the numa_memblock is truncated
at 'max_pfn', which is below the SGX memory.  When the SGX code tries to
look up the affinity of this memory, it fails and produces an error message:

  sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.

and assigns the memory to NUMA node 0.

Instead of silently truncating the memory block at 'max_pfn' and
dropping the SGX memory, add the truncated portion to
'numa_reserved_meminfo'.  This allows the SGX code to later determine
the NUMA affinity of its 'Reserved' area.

Before, numa_meminfo looked like this (from 'crash'):

  blk = { start =          0x0, end = 0x2080000000, nid = 0x0 }
        { start = 0x2080000000, end = 0x4000000000, nid = 0x1 }

numa_reserved_meminfo is empty.

With this, numa_meminfo looks like this:

  blk = { start =          0x0, end = 0x2080000000, nid = 0x0 }
        { start = 0x2080000000, end = 0x4000000000, nid = 0x1 }

and numa_reserved_meminfo has an entry for node 1's SGX memory:

  blk =  { start = 0x4000000000, end = 0x4080000000, nid = 0x1 }

 [ daveh: completely rewrote/reworked changelog ]

Fixes: 5d30f92e76 ("x86/NUMA: Provide a range-to-target_node lookup facility")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210617194657.0A99CB22@viggo.jf.intel.com
2021-06-18 19:37:01 +02:00
Linus Torvalds
c3bf96eaa4 drm fixes for 5.13-rc7
amdgpu:
 - GFX9 and 10 powergating fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDMRqkACgkQDHTzWXnE
 hr7ITw/8Dm6N30vtkIdMA2HNZZ1a2fosilBvmDlP4ve9XYgBM5zO2s9Ig3a4tDm0
 uruewJW8DAZadNvDe9CszXb8qPDauRe3h3BxQYZCQEndRBI57fRPqA7Mq3qhnh0D
 RgnCbdBbx9B4zrCbk2hJF/oi0avW9+Pg5uir44OHDalUFraQ/6OnvPFOZqaGqfZa
 A3Wh7wEkxzrFjUvKiNN1fg+JjoQ5nnDnQwPLdMXF+SYzMQtdVI/reqqI1LuJ0Ixc
 9g8HRTWeZ7vs4tEHTCjnqjEWqFmp+R0Den5RZfHnQb+O/FHRDTjeduDMVkrM9Olu
 DOUPSl2wJ4fW6/uI3fSkvR/fyxPEZqWuHzjxPnxnixQmpxqNw9LQ/3uCZh+TxvdH
 S5Y71sBKE7vi/g8gA2m5riCZlFCX/1iU3hiaagWoINo0TwCodW1Dnsn6/WHTvFvc
 pYfbol8oTwGvC99n+viLwy3als9z3Dce9vdzm2PV4H5q+8tcVtQJwuTWbzFlPr3w
 JKWPZQuUORZapZiex/25QY4JQVhkXs2cx2d1ffJz1sb4y3MDCg9EPeoXROPpNnN+
 utfXhD0xp4nQl9bQMMxloLDG5LLwXdevG5r4voIvd5TkD4Ott5QbvJRNitvF+gaW
 HM98v5VyrTEEUYnPOXwzNeb1EY3YviQVh0WVgqL5lDAwo2MTinU=
 =2F0i
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Not much happening in fixes land this week only one PR for two amdgpu
  powergating fixes was waiting for me, maybe something will show up
  over the weekend, maybe not.

  amdgpu:

   - GFX9 and 10 powergating fixes"

* tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.
  drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
2021-06-18 10:36:18 -07:00
Fox Chen
8943474a41 docs: path-lookup: use bare function() rather than literals
As suggested by Matthew Wilcox and Jonathan Corbet, drop ``...``
literals around function names of this patchset.

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-14-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
ef4aa53f36 docs: path-lookup: update symlink description
instead of lookup_real()/vfs_create(), i_op->lookup() and
i_op->create() will be called directly.

update vfs_open() logic

should_follow_link is merged into lookup_last() or open_last_lookup()
which returns symlink name instead of an integer.

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-13-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
3c1be84b8d docs: path-lookup: update get_link() ->follow_link description
get_link() is merged into pick_link(). i_op->follow_link is
replaced with i_op->get_link(). get_link() can return ERR_PTR(0)
which equals NULL.

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-12-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
de9414adaf docs: path-lookup: update WALK_GET, WALK_PUT desc
WALK_GET is changed to WALK_TRAILING with a different meaning.
Here it should be WALK_NOFOLLOW. WALK_PUT dosn't exist, we have
WALK_MORE.

WALK_PUT == !WALK_MORE

And there is not should_follow_link().

Related commits:
commit 8c4efe22e7 ("namei: invert the meaning of WALK_FOLLOW")
commit 1c4ff1a87e ("namei: invert WALK_PUT logics")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
[jc: applied language tweaks suggested by Neil]
Link: https://lore.kernel.org/r/20210527091618.287093-11-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
18edb95a88 docs: path-lookup: no get_link()
no get_link() anymore. we have step_into() and pick_link().

walk_component() will call step_into(), in turn call pick_link,
and return symlink name.

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-10-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
671f73356f docs: path-lookup: update i_op->put_link and cookie description
No inode->put_link operation anymore. We use delayed_call to
deal with link destruction. Cookie has been replaced with
struct delayed_call.

Related commit: commit fceef393a5 ("switch ->get_link() to
delayed_call, kill ->put_link()")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-9-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
4a00e4bd59 docs: path-lookup: i_op->follow_link replaced with i_op->get_link
follow_link has been replaced by get_link() which can be
called in RCU mode.

see commit: commit 6b2553918d ("replace ->follow_link() with
new method that could stay in RCU mode")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-8-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
d2d3dd5ecc docs: path-lookup: Add macro name to symlink limit description
Add macro name MAXSYMLINKS to the symlink limit description, so
that it is consistent with path name length description above.

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-7-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
34ef75ef25 docs: path-lookup: remove filename_mountpoint
No filename_mountpoint any more
see commit: commit 161aff1d93 ("LOOKUP_MOUNTPOINT:
fold path_mountpointat() into path_lookupat()")

Without filename_mountpoint and path_mountpoint(), the
numbers should be four & three:

"These four correspond roughly to the three path_*() functions"

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-6-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:08 -06:00
Fox Chen
71e0a67dc6 docs: path-lookup: update do_last() part
traling_symlink() was merged into lookup_last, do_last().

do_last() has later been split into open_last_lookups()
and do_open().

see related commit: commit c5971b8c63 ("take post-lookup
part of do_last() out of loop")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-5-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:07 -06:00
Fox Chen
8593d2cc8c docs: path-lookup: update path_mountpoint() part
path_mountpoint() doesn't exist anymore. Have been folded
into path_lookup_at when flag is set with LOOKUP_MOUNTPOINT.
Check commit: commit 161aff1d93 ("LOOKUP_MOUNTPOINT: fold
path_mountpointat() into path_lookupat()")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-4-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:07 -06:00
Fox Chen
084c86837a docs: path-lookup: update path_to_nameidata() part
No path_to_namei() anymore, step_into() will be called.
Related commit: commit c99687a03a ("fold path_to_nameidata()
into its only remaining caller")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-3-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:07 -06:00
Fox Chen
993b892610 docs: path-lookup: update follow_managed() part
No follow_managed() anymore, handle_mounts(),
traverse_mounts(), will do the job.
see commit 9deed3ebca ("new helper: traverse_mounts()")

Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20210527091618.287093-2-foxhlchen@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:36:07 -06:00
Bhupesh Sharma
b557471bb2 arm64: dts: qcom: pmm8155au_2: Add base dts file
Add base DTS file for pmm8155au_2 along with GPIOs, power-on, rtc and vadc
nodes.

Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617054548.353293-5-bhupesh.sharma@linaro.org
[bjorn: Added gpio-ranges to pmm8155au_2_gpios]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:29:53 -05:00
Bhupesh Sharma
10489ef12f arm64: dts: qcom: pmm8155au_1: Add base dts file
Add base DTS file for pmm8155au_1 along with GPIOs, power-on, rtc and vadc
nodes.

Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617054548.353293-4-bhupesh.sharma@linaro.org
[bjorn: Added gpio-ranges to pmm8155au_1_gpios]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-18 12:28:46 -05:00
Kees Cook
222a28edce docs: Makefile: Use CONFIG_SHELL not SHELL
Fix think-o about which variable to find the Kbuild-configured shell.
This has accidentally worked due to most shells setting $SHELL by
default.

Fixes: 51e46c7a40 ("docs, parallelism: Rearrange how jobserver reservations are made")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210617225808.3907377-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-18 11:26:08 -06:00
Dan Carpenter
12fc23a4a3 drm/amdgpu: fix amdgpu_preempt_mgr_new()
There is a reversed if statement in amdgpu_preempt_mgr_new() so it
always returns -ENOMEM.

Fixes: 09b020bb05 ("Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxbQXg/Wqm0ACxt@mwanda
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-18 19:00:16 +02:00
Xi Wang
7e78dd816e RDMA/hns: Clear extended doorbell info before using
Both of HIP08 and HIP09 require the extended doorbell information to be
cleared before being used.

Fixes: 6b63597d35 ("RDMA/hns: Add TSQ link table support")
Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:54:25 -03:00
Matthew Auld
59bd8ae7d3 drm/i915/selftests: add back the selftest() hook for the buddy
When we resurrected the selftest we forgot to add back the selftest()
hook, meaning the test is not currently run.

References: d148738923 ("drm/i915/ttm Initialize the ttm device and memory managers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618133150.700375-1-matthew.auld@intel.com
2021-06-18 17:50:54 +01:00
Masami Hiramatsu
45237f9898 perf probe: Add --bootconfig to output definition in bootconfig format
Now the boot-time tracing supports kprobes events and that must be
written in bootconfig file in the following format.

  ftrace.event.kprobes.<EVENT_NAME>.probes = <PROBE-DEF>

'perf probe' already supports --definition (-D) action to show probe
definitions, but the format is for tracefs:

  [p|r][:EVENT_NAME] <PROBE-DEF>

This patch adds the --bootconfig option for -D action so that it outputs
the probe definitions in bootconfig format. E.g.

  $ perf probe --bootconfig -D "path_lookupat:7 err:s32 s:string"
  ftrace.event.kprobes.path_lookupat_L7.probe = 'path_lookupat.isra.0+309 err_s32=%ax:s32 s_string=+0(%r13):string'

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/162282412351.452340.14871995440005640114.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-18 13:50:05 -03:00
Masami Hiramatsu
d26ea48144 perf probe: Cleanup synthesize_probe_trace_command()
Cleanup synthesize_probe_trace_command() to simplify the code path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/162282411361.452340.16886399333622147122.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-18 13:50:05 -03:00
Masami Hiramatsu
f338de2219 perf probe: Support probes on init functions for offline kernel
'perf probe' internally checks the probe target is in the text area in
post-process (after analyzing debuginfo). But it fails if the probe
target is in the "inittext".

This is a good limitation for the online kernel because such functions
have gone after booting. However, for using it for boot-time tracing,
user may want to put a probe on init functions.

This skips the post checking process if the target is offline kenrel so
that user can get the probe definition on the init functions.

Without this patch:

  $ perf probe -k ./build-x86_64/vmlinux -D do_mount_root:10
  Probe point 'do_mount_root:10' not found.
    Error: Failed to add events.

With this patch:

  $ perf probe -k ./build-x86_64/vmlinux -D do_mount_root:10
  p:probe/do_mount_root_L10 mount_block_root+300

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/162282410293.452340.13347006295826431632.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-18 13:50:05 -03:00
Ian Rogers
a49ed2b4e2 perf test: Make stat bpf counters test more robust
If the test is run on a hypervisor then the cycles event may not be
counted, skip the test in this situation. Fail the test if cycles are
not counted in the subsequent bpf counter run.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-18 13:50:05 -03:00
Ian Rogers
2638fbd351 perf test: Add verbose skip output for bpf counters
Provide additional context for when the stat bpf counters test skips.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-18 13:50:05 -03:00
Jack Wang
a95fbe2aba RDMA/rtrs: Check device max_qp_wr limit when create QP
Currently we only check device max_qp_wr limit for IO connection, but not
for service connection. We should check for both.

So save the max_qp_wr device limit in wr_limit, and use it for both IO
connections and service connections.

While at it, also remove an outdated comments.

Link: https://lore.kernel.org/r/20210614090337.29557-6-jinpu.wang@ionos.com
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:47:13 -03:00
Guoqing Jiang
354462eb7f RDMA/rtrs: Rename cq_size/queue_size to cq_num/queue_num
Those variables are passed to create_cq, create_qp, rtrs_iu_alloc and
rtrs_iu_free, so these *_size means the num of unit. And cq_size also
means number of cq element.

Also move the setting of cq_num to common path.

Link: https://lore.kernel.org/r/20210614090337.29557-5-jinpu.wang@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:47:13 -03:00
Md Haris Iqbal
b012f0ad53 RDMA/rtrs: RDMA_RXE requires more number of WR
When using rdma_rxe, post_one_recv() returns ENOMEM error due to the full
recv queue.  This patch increase the number of WR for receive queue to
support all devices.

Link: https://lore.kernel.org/r/20210614090337.29557-4-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:47:13 -03:00
Jack Wang
0509ebfa33 RDMA/rtrs-clt: Use minimal max_send_sge when create qp
We use device limit max_send_sge, which is suboptimal for memory usage.
We don't need that much for User Con, 1 is enough. And for IO con,
sess->max_segments + 1 is enough

Link: https://lore.kernel.org/r/20210614090337.29557-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:47:12 -03:00
Jack Wang
5e91eabf66 RDMA/rtrs-srv: Set minimal max_send_wr and max_recv_wr
Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory with
no benefits.

For max_send_wr, we don't really need alway max_qp_wr size when creating
qp, reduce it to cq_size.

For max_recv_wr,  cq_size is enough.

With the patch when sess_queue_depth=128, per session (2 paths) memory
consumption reduced from 188 MB to 65MB

When always_invalidate is enabled, we need send more wr, so treat it
special.

Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210614090337.29557-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18 13:47:12 -03:00
Takashi Iwai
1948fc065a ALSA: hda/realtek: Add another ALC236 variant support
The codec chip 10ec:0230 is another variant of ALC236, combined with a
card reader.  Apply the equivalent setup as 10ec:0236.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1184869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210618161720.28694-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-18 18:46:03 +02:00
lijiazi
a79da21b48 blk-wbt: remove outdated comment
Now wbt_wait() returns void, so remove now outdated comment.

Signed-off-by: lijiazi <lijiazi@xiaomi.com>
Link: https://lore.kernel.org/r/1623986240-13878-1-git-send-email-lijiazi@xiaomi.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-18 10:45:33 -06:00
Mario Limonciello
8fbd6c15ea ACPI: PM: Adjust behavior for field problems on AMD systems
Some AMD Systems with uPEP _HID AMD004/AMDI005 have an off by one bug
in their function mask return.  This means that they will call entrance
but not exit for matching functions.

Other AMD systems with this HID should use the Microsoft generic UUID.

AMD systems with uPEP HID AMDI006 should be using the Microsoft method.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:39:54 +02:00
Pratik Vishwakarma
5dbf509975 ACPI: PM: s2idle: Add support for new Microsoft UUID
This adds supports for _DSM notifications to the Microsoft UUID
described by Microsoft documentation for s2idle.

Link: https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-firmware-notifications
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:39:54 +02:00
Pratik Vishwakarma
3f4b116c0b ACPI: PM: s2idle: Add support for multiple func mask
Required for follow-up patch adding new UUID needing new function
mask.

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:39:54 +02:00
Pratik Vishwakarma
4a012dc82d ACPI: PM: s2idle: Refactor common code
Refactor common code to prepare for upcoming changes.
 * Remove unused struct.
 * Print error before returning.
 * Frees ACPI obj if _DSM type is not as expected.
 * Treat lps0_dsm_func_mask as an integer rather than character
 * Remove extra out_obj
 * Move rev_id

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:39:54 +02:00
Pratik Vishwakarma
904d4a6c07 ACPI: PM: s2idle: Use correct revision id
AMD spec mentions only revision 0. With this change,
device constraint list is populated properly.

Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:39:54 +02:00
Thomas Hellström
b07a648383 drm/i915/ttm: Fix incorrect assumptions about ttm_bo_validate() semantics
We have assumed that if the current placement was not the requested
placement, but instead one of the busy placements, a TTM move would have
been triggered. That is not the case.

So when we initially place LMEM objects in "Limbo", (that is system
placement without any pages allocated), to be able to defer clearing
objects until first get_pages(), the first get_pages() would happily keep
objects in system memory if that is one of the allowed placements. And
since we don't yet support i915 GEM system memory from TTM, everything
breaks apart.

So make sure we try the requested placement first, if no eviction is
needed. If that fails, retry with all allowed placements also allowing
evictions. Also make sure we handle TTM failure codes correctly.

Also temporarily (until we support i915 GEM system on TTM), restrict
allowed placements to the requested placement to avoid things falling
apart should LMEM be full.

Fixes: 38f28c0695 ("drm/i915/ttm: Calculate the object placement at get_pages time")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618132515.163277-1-thomas.hellstrom@linux.intel.com
2021-06-18 17:35:16 +01:00
Marc Zyngier
85c653fcc6 Merge branch arm64/for-next/caches into kvmarm-master/next
arm64 cache management function cleanup from Fuad Tabba,
shared with the arm64 tree.

* arm64/for-next/caches:
  arm64: Rename arm64-internal cache maintenance functions
  arm64: Fix cache maintenance function comments
  arm64: sync_icache_aliases to take end parameter instead of size
  arm64: __clean_dcache_area_pou to take end parameter instead of size
  arm64: __clean_dcache_area_pop to take end parameter instead of size
  arm64: __clean_dcache_area_poc to take end parameter instead of size
  arm64: __flush_dcache_area to take end parameter instead of size
  arm64: dcache_by_line_op to take end parameter instead of size
  arm64: __inval_dcache_area to take end parameter instead of size
  arm64: Fix comments to refer to correct function __flush_icache_range
  arm64: Move documentation of dcache_by_line_op
  arm64: assembler: remove user_alt
  arm64: Downgrade flush_icache_range to invalidate
  arm64: Do not enable uaccess for invalidate_icache_range
  arm64: Do not enable uaccess for flush_icache_range
  arm64: Apply errata to swsusp_arch_suspend_exit
  arm64: assembler: add conditional cache fixups
  arm64: assembler: replace `kaddr` with `addr`

Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-18 17:30:39 +01:00
Andy Shevchenko
df35ee7086 ACPI: sysfs: Remove tailing return statement in void function
The tail return statement is redundant in void functions. Remove it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:20:53 +02:00
Andy Shevchenko
a9c4cf299f ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
We have a few open-coded __ATTR_RO() and __ATTR_RW() macros.
Replace the custom code with generic macros.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-18 18:20:53 +02:00
Jesse Brandeburg
37dc8fea86 iavf: clean up packet type lookup table
Remove the unused ptype struct value, which makes table init easier for
the zero entries, and use ranged initializer to remove a bunch of code
(works with gcc and clang). There is no significant functional change.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-18 09:04:44 -07:00