Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two).
They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There
also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500
and no developers have obtained it so far (to my knowledge).
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Downstream workaround:
2e7a9ee1c9
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616002321.74155-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616002321.74155-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add required pins for SDHCI2, so that the interface can work reliably.
This commit adds sleep_state setup to the SoC DTSI, as it is common for
all boards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616002321.74155-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
96Boards RB3 has a USB XHCI PCI Renesas host controller. This controller
requires firmware to be loaded on its ROM/RAM, so enable the module
CONFIG_USB_XHCI_PCI_RENESAS. This depends on CONFIG_USB_XHCI_PCI so
enable that as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615081749.3210344-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for SONY Xperia 1 and 5 smartphones, both based on the
Qualcomm SM8150 chipset. There also exist 5G-capable versions of these
devices, but they weren't sold much (if at all) outside Japan.
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Downstream workaround:
2e7a9ee1c9
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> (On Bahamut)
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Not enabling modem back on the HDK, as it uses a sa8150.
Also fixed a sorting mistake in both boards' dt while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
While a memX device on /sys/bus/cxl represents a CXL memory expander
control interface, a pmemX device represents the persistent memory
sub-functionality. It bridges the CXL subystem to the libnvdimm nmemX
control interface.
With this skeleton ndctl can now see persistent memory devices on a
"CXL" bus. Later patches add support for translating libnvdimm native
commands to CXL commands.
# ndctl list -BDiu -b CXL
{
"provider":"CXL",
"dev":"ndbus1",
"dimms":[
{
"dev":"nmem1",
"state":"disabled"
},
{
"dev":"nmem0",
"state":"disabled"
}
]
}
Given nvdimm_bus_unregister() removes all devices on an ndbus0 the
cxl_pmem infrastructure needs to arrange ->remove() to be triggered on
cxl_nvdimm devices to keep their enabled state synchronized with the
registration state of their corresponding device on the nvdimm_bus. In
other words, always arrange for cxl_nvdimm_driver.remove() to unregister
nvdimms from an nvdimm_bus ahead of the bus being unregistered.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162380012696.3039556.4293801691038740850.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
LIBNVDIMM device objects register sysfs power attributes despite nothing
requiring that support. Clean up sysfs remove the power/ attribute
group. This requires a device_create() and a device_register() usage to
be converted to the device_initialize() + device_add() pattern.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379910795.2993820.10130417680551632288.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL is a hotplug bus and arranges for nvdimm devices to be dynamically
discovered and removed. The libnvdimm core manages shutdown of nvdimm
security operations when the device is unregistered. That functionality
is moved to nvdimm_delete() and invoked by the CXL-to-nvdimm glue code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379910271.2993820.2955889139842401250.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Register an 'nvdimm-bridge' device to act as an anchor for a libnvdimm
bus hierarchy. Also, flesh out the cxl_bus definition to allow a
cxl_nvdimm_bridge_driver to attach to the bridge and trigger the
nvdimm-bus registration.
The creation of the bridge is gated on the detection of a PMEM capable
address space registered to the root. The bridge indirection allows the
libnvdimm module to remain unloaded on platforms without PMEM support.
Given that the probing of ACPI0017 is asynchronous to CXL endpoint
devices, and the expectation that CXL endpoint devices register other
PMEM resources on the 'CXL' nvdimm bus, a workqueue is added. The
workqueue is needed to run bus_rescan_devices() outside of the
device_lock() of the nvdimm-bridge device to rendezvous nvdimm resources
as they arrive. For now only the bus is taken online/offline in the
workqueue.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909706.2993820.14051258608641140169.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Enable devices on the 'cxl' bus to be attached to drivers. The initial
user of this functionality is a driver for an 'nvdimm-bridge' device
that anchors a libnvdimm hierarchy attached to CXL persistent memory
resources. Other device types that will leverage this include:
cxl_port: map and use component register functionality (HDM Decoders)
cxl_nvdimm: translate CXL memory expander endpoints to libnvdimm
'nvdimm' objects
cxl_region: translate CXL interleave sets to libnvdimm 'region' objects
The pairing of devices to drivers is handled through the cxl_device_id()
matching to cxl_driver.id values. A cxl_device_id() of '0' indicates no
driver support.
In addition to ->match(), ->probe(), and ->remove() support for the
'cxl' bus introduce MODULE_ALIAS_CXL() to autoload modules containing
cxl-drivers. Drivers are added in follow-on changes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909190.2993820.6134168109678004186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210612192358.62602-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the aforementioned properties in the SoC DTSI so that everybody doesn't
have to copy that into their device DTs, effectively reducing code
duplication.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613114356.82358-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DPU/MDSS is borderline useless without MDP, so disabling
both of them makes little sense. With this change, enabling
mdss will be enough.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613110635.46537-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Extend the enclave to have two operations: ENCL_OP_PUT and ENCL_OP_GET.
ENCL_OP_PUT stores value inside the enclave address space and
ENCL_OP_GET reads it. The internal buffer can be later extended to be
variable size, and allow reclaimer tests.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add EXPECT_EEXIT() macro, which will conditionally print the exception
information, in addition to
EXPECT_EQ(self->run.function, EEXIT);
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Often, it's useful to check whether /proc/self/maps looks sane when
dealing with memory mapped objects, especially when they are JIT'ish
dynamically constructed objects. Therefore, dump "/dev/sgx_enclave"
matching lines from the memory map in FIXTURE_SETUP().
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-15
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 11 day(s) which contain
a total of 10 files changed, 115 insertions(+), 16 deletions(-).
The main changes are:
1) Fix marking incorrect umem ring as done in libbpf's
xsk_socket__create_shared() helper, from Kev Jackson.
2) Fix oob leakage under a spectre v1 type confusion
attack, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Migrate to kselftest harness. Use a fixture test with enclave initialized
and de-initialized for each of the existing three tests, in other words:
1. One FIXTURE() for managing the enclave life-cycle.
2. Three TEST_F()'s, one for each test case.
Dump lines of /proc/self/maps matching "sgx" in FIXTURE_SETUP() as this
can be very useful debugging information later on.
Amended commit log:
This migration changes the output of this test. Instead of skipping
the tests if open /dev/sgx_enclave fails, it will run all the tests
and report failures on all of them.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rename symbols for better clarity:
* 'eenter' might be confused for directly calling ENCLU[EENTER]. It does
not. It calls into the VDSO, which actually has the EENTER instruction.
* 'sgx_call_vdso' is *only* used for entering the enclave. It's not some
generic SGX call into the VDSO.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In most cases io_commit_cqring() is just an smp_store_release(), and
it's hot enough, especially for IRQ rw, to want it to save on a function
call. Mark it inline and extract a non-inlined slow path doing drain
and timeout flushing. The inlined part is pretty slim to not cause
binary bloating.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7350f8b6b92caa50a48a80be39909f0d83eddd93.1623772051.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Place all drain_next logic into io_drain_req(), so it's never executed
if there was no drained requests before. The only thing we need is to
set ->drain_active if we see a request with IOSQE_IO_DRAIN, do that in
io_init_req() where flags are definitely in registers.
Also, all drain-related code is encapsulated in io_drain_req(), makes it
cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/68bf4f7395ddaafbf1a26bd97b57d57d45a9f900.1623772051.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->drain_used is one way, which is not optimal if users use DRAIN but
very rarely. However, we can just clear it in io_drain_req() when all
drained before requests are gone. Also rename the flag to reflect the
change and be more clear about it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7f37a240857546a94df6348507edddacab150460.1623772051.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch enables support for Dell S140 and later controllers
that use Intel's PCHs configured as PCI_CLASS_STORAGE_RAID.
Reviewed-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Charles Rose <charles.rose@dell.com>
Link: https://lore.kernel.org/r/20210615190801.1744466-1-charles.rose@dell.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MD changes from Song:
"1) iostats rewrite by Guoqing Jiang;
2) raid5 lock contention optimization by Gal Ofri."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: avoid device_lock in read_one_chunk()
md: add comments in md_integrity_register
md: check level before create and exit io_acct_set
md: Constify attribute_group structs
md: mark some personalities as deprecated
md/raid10: enable io accounting
md/raid1: enable io accounting
md/raid1: rename print_msg with r1bio_existed
md/raid5: avoid redundant bio clone in raid5_read_one_chunk
md/raid5: move checking badblock before clone bio in raid5_read_one_chunk
md: add io accounting for raid0 and raid5
md: revert io stats accounting
Two oneliners to fix clang warnings:
- -Wimplicit-fallthrough warning fix from Gustavo A. R. Silva.
- Redundant assignment warning fix from Jiapeng Chong.
No semantic and behavioural changes.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEdlQDNgKUDfGSD+QDtSKVsDNQMB8FAmDIS9ASHGVmcmVtb3ZA
bGludXguY29tAAoJELUilbAzUDAftJYP/RTZ/gMH/41vBFj94UACCPwtexsEgIxe
jU0GglPtKb/wTSMgQRs3EIsNTV/fWnZIoVtc4Mi+uT1jH7LFg+yYztSKfXL+OM4Y
rZ/1Y68k0qH7ImX86Xi+He2Mpiqy9nr9wr4oJfWaawIunLhHrwyn7HwVsKhNqzRl
grulrVXlTyypZPXOz+woa+waKLXFaYxgHjE4pV5qQRoRa72MIZ7gbbF9ch9f4o/P
zCPmWztkHCJQt0xNYhY3XSBGLamxJuG3MtckTcQ2oQwzoJvsDvbXI+k+MbSjOOuE
mXSjBQcmD+K/Z7AH6t5ax1nKt1gSorJOVVPCaorycxK62GqAjhomlGnB5f7HHLuj
c0tbeWSkT4SwZjfD/sTKdJE9m3hR4IBxIOGIuP9b5dP/NIn/bKa+moqa6ydldQ8b
XvHRzry5lryzXepg7hZbhwkfabGuBnmKaH6VgVxPUaPGF8cUO/zyq4F2TSXZMOee
hMG+w1VcKPuwDj1IY1WfwXPv6VBhx69b5/0lqtcpztMCqSuZd8+rsWpCGuVFGc2i
NOvRQHjPwuEMi9m9H4Jmw/ZS3IZ48J3XBd+Zsu+PJgcs+JUCQKme+9iybeW+lfSF
5GV/CurlP05qD1LosMg1L2XnJMBd9LGs75tLgtadxHVyXubKN6VrGQ+AgCByTEI4
rm605K2iARQJ
=1rJH
-----END PGP SIGNATURE-----
Merge tag 'floppy-for-5.14' of https://github.com/evdenis/linux-floppy into for-5.14/drivers
Pull floppy fixes from Denis:
"Floppy patches for 5.14
Two oneliners to fix clang warnings:
- -Wimplicit-fallthrough warning fix from Gustavo A. R. Silva.
- Redundant assignment warning fix from Jiapeng Chong.
No semantic and behavioural changes."
* tag 'floppy-for-5.14' of https://github.com/evdenis/linux-floppy:
floppy: Fix fall-through warning for Clang
floppy: cleanup: remove redundant assignment to nr_sectors
fs/io_uring.c: In function 'io_alloc_page_table':
include/linux/minmax.h:20:28: warning: comparison of distinct pointer
types lacks a cast
Cast everything to size_t using min_t.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9123c8ffce ("io_uring: add helpers for 2 level table alloc")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/50f420a956bca070a43810d4a805293ed54f39d8.1623759527.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sqe_ptr argument has been gone since 709b302fad (io_uring:
simplify io_get_sqring, 2020-04-08), made the return value of the
function. Update the comment accordingly.
Signed-off-by: Fam Zheng <fam.zheng@bytedance.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210604164256.12242-1-fam.zheng@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace drain checks with one-way flag set upon seeing the first
IOSQE_IO_DRAIN request. There are several places where it cuts cycles
well:
1) It's much faster than the fast check with two
conditions in io_drain_req() including pretty complex
list_empty_careful().
2) We can mark io_queue_sqe() inline now, that's a huge win.
3) It replaces timeout and drain checks in io_commit_cqring() with a
single flags test. Also great not touching ->defer_list there without a
reason so limiting cache bouncing.
It adds a small amount of overhead to drain path, but it's negligible.
The main nuisance is that once it meets any DRAIN request in io_uring
instance lifetime it will _always_ go through a slower path, so
drain-less and offset-mode timeout less applications are preferable.
The overhead in that case would be not big, but it's worth to bear in
mind.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/98d2fff8c4da5144bb0d08499f591d4768128ea3.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->uring_lock is prevalently used for submission, even though it protects
many other things like iopoll, registeration, selected bufs, and more.
And it's placed together with ->cq_wait poked on completion and CQ
waiting sides. Move them apart, ->uring_lock goes to the submission
data, and cq_wait to completion related chunk. The last one requires
some reshuffling so everything needed by io_cqring_ev_posted*() is in
one cacheline.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dea5e845caee4c98aa0922b46d713154d81f7bd8.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use several wait_queue_head's for different purposes, but namings are
confusing. First rename ctx->cq_wait into ctx->poll_wait, because this
one is used for polling an io_uring instance. Then rename ctx->wait into
ctx->cq_wait, which is responsible for CQE waiting.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47b97a097780c86c67b20b6ccc4e077523dce682.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no users of ->sq_check_overflow, only ->cq_check_overflow is
used. Combine it and move out of completion related part of struct
io_ring_ctx.
A not so obvious benefit of it is fitting all completion side fields
into a single cacheline. It was taking 2 lines before with 56B padding,
and io_cqring_ev_posted*() were still touching both of them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/25927394964df31d113e3c729416af573afff5f5.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
submit_state.link is used only to assemble a link and not used for
actual submission, so clear it before io_queue_sqe() in io_submit_sqe(),
awhile it's hot and in caches and queueing doesn't spoil it. May also
potentially help compiler with spilling or to do other optimisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1579939426f3ad6b55af3005b1389bbbed7d780d.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_commit_cqring() might be very hot and we definitely don't want to
touch ->timeout_list there, because 1) it's shared with the submission
side so might lead to cache bouncing and 2) may need to load an extra
cache line, especially for IRQ completions.
We're interested in it at the completion side only when there are
offset-mode timeouts, which are not so popular. Replace
list_empty(->timeout_list) hot path check with a new one-way flag, which
is set when we prepare the first offset-mode timeout.
note: the flag sits in the same line as briefly used after ->rings
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4892ec68b71a69f92ffbea4a1499be3ec0d463b.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kill ->cached_sq_dropped and wire DRAIN sequence number correction via
->cq_extra, which is there exactly for that purpose. User visible
dropped counter will be populated by incrementing it instead of keeping
a copy, similarly as it was done not so long ago with cq_overflow.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/088aceb2707a534d531e2770267c4498e0507cc1.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since moving locked_free_* out of struct io_submit_state
ctx->submit_state is accessed on submission side only, so move it into
the submission section. Same goes for rsrc table pointers/nodes/etc.,
they must be taken and checked during submission because sync'ed by
uring_lock, so move them there as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8a5899a50afc6ccca63249e716f580b246f3dec6.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx->flags are heavily used by both, completion and submission sides, so
move it out from the ctx fields related to submissions. Instead, place
it together with ctx->refs, because it's already cacheline-aligned and
so pads lots of space, and both almost never change. Also, in most
occasions they are accessed together as refs are taken at submission
time and put back during completion.
Do same with ctx->rings, where the pointer itself is never modified
apart from ring init/free.
Note: in percpu mode, struct percpu_ref doesn't modify the struct itself
but takes indirection with ref->percpu_count_ptr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4c48c173e63d35591383ba2b87e8b8e8dfdbd23d.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sq_array and sq_sqes are always used together, however they are in
different cachelines, where the borderline is right before
cq_overflow_list is rather rarely touched. Move the fields together so
it loads only one cacheline.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3ef2411a94874da06492506a8897eff679244f49.1623709150.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable ret is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210615143424.60449-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Static analysis is warning that the sizeof being used is should be
of *data->tags[i] and not data->tags[i]. Although these are the same
size on 64 bit systems it is not a portable assumption to assume
this is true for all cases. Fix this by using a temporary pointer
tag_slot to make the code a clearer.
Addresses-Coverity: ("Sizeof not portable")
Fixes: d878c81610 ("io_uring: hide rsrc tag copy into generic helpers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210615130011.57387-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c:917:56-57:
pstate_enabled: first occurrence line 935, second occurrence line 937
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a
circular lock. destroy_queue_nocpsch_locked is called under a DQM lock,
which is taken in MMU notifiers, potentially in FS reclaim context.
Taking another lock, which is BO reservation lock from free_mqd, while
causing an FS reclaim inside the DQM lock creates a problematic circular
lock dependency. Therefore move free_mqd out of
destroy_queue_nocpsch_locked and call it after unlocking DQM.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move shadow_list to struct amdgpu_bo_vm as shadow BOs
are part of PT/PD BOs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>