Commit graph

1,044,825 commits

Author SHA1 Message Date
Chunfeng Yun
b057da6d54 usb: mtu3: power down device IP by default
Power down device IP by default until @udc_start is called.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1623139069-8173-6-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:42:20 +02:00
Martin Fuzzey
314538041b rsi: fix AP mode with WPA failure due to encrypted EAPOL
In AP mode WPA2-PSK connections were not established.

The reason was that the AP was sending the first message
of the 4 way handshake encrypted, even though no pairwise
key had (correctly) yet been set.

Encryption was enabled if the "security_enable" driver flag
was set and encryption was not explicitly disabled by
IEEE80211_TX_INTFL_DONT_ENCRYPT.

However security_enable was set when *any* key, including
the AP GTK key, had been set which was causing unwanted
encryption even if no key was avaialble for the unicast
packet to be sent.

Fix this by adding a check that we have a key and drop
the old security_enable driver flag which is insufficient
and redundant.

The Redpine downstream out of tree driver does it this way too.

Regarding the Fixes tag the actual code being modified was
introduced earlier, with the original driver submission, in
dad0d04fa7 ("rsi: Add RS9113 wireless driver"), however
at that time AP mode was not yet supported so there was
no bug at that point.

So I have tagged the introduction of AP support instead
which was part of the patch set "rsi: support for AP mode" [1]

It is not clear whether AP WPA has ever worked, I can see nothing
on the kernel side that broke it afterwards yet the AP support
patch series says "Tests are performed to confirm aggregation,
connections in WEP and WPA/WPA2 security."

One possibility is that the initial tests were done with a modified
userspace (hostapd).

[1] https://www.spinics.net/lists/linux-wireless/msg165302.html

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: 38ef62353a ("rsi: security enhancements for AP mode")
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1622564459-24430-1-git-send-email-martin.fuzzey@flowbird.group
2021-06-15 16:42:18 +03:00
YueHaibing
8667ab49a6 libertas: use DEVICE_ATTR_RW macro
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210523040339.2724-1-yuehaibing@huawei.com
2021-06-15 16:41:44 +03:00
Hang Zhang
3f60f46856 cw1200: Revert unnecessary patches that fix unreal use-after-free bugs
A previous commit 4f68ef64cd ("cw1200: Fix concurrency
use-after-free bugs in cw1200_hw_scan()") tried to fix a seemingly
use-after-free bug between cw1200_bss_info_changed() and
cw1200_hw_scan(), where the former frees a sk_buff pointed
to by frame.skb, and the latter accesses the sk_buff
pointed to by frame.skb. However, this issue should be a
false alarm because:

(1) "frame.skb" is not a shared variable between the above
two functions, because "frame" is a local function variable,
each of the two functions has its own local "frame" - they
just happen to have the same variable name.

(2) the sk_buff(s) pointed to by these two "frame.skb" are
also two different object instances, they are individually
allocated by different dev_alloc_skb() within the two above
functions. To free one object instance will not invalidate
the access of another different one.

Based on these facts, the previous commit should be unnecessary.
Moreover, it also introduced a missing unlock which was
addressed in a subsequent commit 51c8d24101 ("cw1200: fix missing
unlock on error in cw1200_hw_scan()"). Now that the
original use-after-free is unreal, these two commits should
be reverted. This patch performs the reversion.

Fixes: 4f68ef64cd ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()")
Fixes: 51c8d24101 ("cw1200: fix missing unlock on error in cw1200_hw_scan()")
Signed-off-by: Hang Zhang <zh.nvgt@gmail.com>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210521223238.25020-1-zh.nvgt@gmail.com
2021-06-15 16:41:22 +03:00
Tong Tiangen
5f4dee73a4 usb: isp1760: Fix meaningless check in isp1763_run()
Remove attribution to retval before check, which make it completely
meaningless, and does't check what it was supposed: the return
value of the timed function to set up configuration flag.

Fixes: 60d789f3bf ("usb: isp1760: add support for isp1763")
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20210611014055.68551-1-tongtiangen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:40:58 +02:00
Ding Senjie
03611cc526 rtlwifi: Fix spelling of 'download'
downlaod -> download

Signed-off-by: Ding Senjie <dingsenjie@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210521062734.21284-1-dingsenjie@163.com
2021-06-15 16:40:54 +03:00
Yang Li
a99086057e rtlwifi: Remove redundant assignments to ul_enc_algo
Variable ul_enc_algo is being initialized with a value that is never
read, it is being set again in the following switch statements in
all of the case and default paths. Hence the unitialization is
redundant and can be removed.

Clean up clang warning:

drivers/net/wireless/realtek/rtlwifi/cam.c:170:6: warning: Value stored
to 'ul_enc_algo' during its initialization is never read
[clang-analyzer-deadcode.DeadStores]

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621303199-1542-1-git-send-email-yang.lee@linux.alibaba.com
2021-06-15 16:39:55 +03:00
Colin Ian King
03a1b938cf rtlwifi: rtl8723ae: remove redundant initialization of variable rtstatus
The variable rtstatus is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513122410.59204-1-colin.king@canonical.com
2021-06-15 16:39:37 +03:00
Yang Shen
c362dd8401 wl1251: Fix missing function name in comments
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wl1251/cmd.c:15: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/net/wireless/ti/wl1251/cmd.c:62: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/net/wireless/ti/wl1251/cmd.c:103: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/net/wireless/ti/wl1251/cmd.c:141: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-11-shenyang39@huawei.com
2021-06-15 16:38:58 +03:00
Moritz Fischer
e90f9ceb70 usb: renesas-xhci: Replace BIT(15) with macro
Replace BIT(15) with RENESAS_ROM_STATUS_ROM_EXISTS.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210614215614.240489-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:38:45 +02:00
Zou Wei
dd778f8922 cw1200: add missing MODULE_DEVICE_TABLE
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.com
2021-06-15 16:38:22 +03:00
Zhen Lei
d56b69c4fb rtlwifi: btcoex: 21a 2ant: Delete several duplicate condition branch codes
The statements of the "if (max_interval == 3)" branch are the same as
those of the "else" branch. Delete them to simplify the code.

No functional change.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210510082237.3315-1-thunder.leizhen@huawei.com
2021-06-15 16:38:05 +03:00
Marek Vasut
29ca9e6ca5 rsi: Add support for changing beacon interval
Pick code for changing the beacon interval (e.g. using beacon_int in
hostap config) from the downstream RSI driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210507213149.140192-1-marex@denx.de
2021-06-15 16:37:41 +03:00
Marek Vasut
b1c3a24897 rsi: Assign beacon rate settings to the correct rate_info descriptor field
The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info
field. The rest of the driver does it correctly, except this one place,
so fix it. This is also aligned with the RSI downstream vendor driver.
Without this patch, an AP operating at 5 GHz does not transmit any
beacons at all, this patch fixes that.

Fixes: d26a955940 ("rsi: add beacon changes for AP mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210507213105.140138-1-marex@denx.de
2021-06-15 16:37:19 +03:00
Saurav Girepunje
29d97219f4 zd1211rw: Prefer pr_err over printk error msg
In zd_usb.c usb_init we can prefer pr_err() over printk KERN_ERR
log level.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506044838.GA7260@user
2021-06-15 16:37:01 +03:00
Ping-Ke Shih
924599d407 rtlwifi: 8821a: btcoexist: add comments to explain why if-else branches are identical
The coexistence programmers preserve the same code of branches
intentionally to fine tune performance easier, because bandwidth and RSSI
strength are highly related to coexistence performance. The basic rule of
performance tuning is to assign most time slot to BT for realtime
application, and WiFi uses remaining time slot but don't lower than low
bound.

Reported-by: Inigo Huguet <ihuguet@redhat.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506013738.5943-1-pkshih@realtek.com
2021-06-15 16:36:44 +03:00
Dmitry Osipenko
7917e90667 usb: phy: tegra: Correct definition of B_SESS_VLD_WAKEUP_EN bit
The B_SESS_VLD_WAKEUP_EN bit 6 was added by a mistake in a previous
commit. This bit corresponds to B_SESS_END_WAKEUP_EN, which we don't use.
The B_VBUS_VLD_WAKEUP_EN doesn't exist at all and B_SESS_VLD_WAKEUP_EN
needs to be in place of it. We don't utilize B-sensors in the driver,
so it never was a problem, nevertheless let's correct the definition of
the bits.

Fixes: 35192007d2 ("usb: phy: tegra: Support waking up from a low power mode")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210613145936.9902-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:36:23 +02:00
Dmitry Osipenko
6f8d39a8ef usb: phy: tegra: Wait for VBUS wakeup status deassertion on suspend
Some devices need an extra delay after losing VBUS, otherwise VBUS may
be detected as active at suspend time, preventing the PHY's suspension
by the VBUS detection sensor. This problem was found on Asus Transformer
TF700T (Tegra30) tablet device, where the USB PHY wakes up immediately
from suspend because VBUS sensor continues to detect VBUS as active after
disconnection. We need to poll the PHY's VBUS wakeup status until it's
deasserted before suspending PHY in order to fix this minor trouble.

Fixes: 35192007d2 ("usb: phy: tegra: Support waking up from a low power mode")
Reported-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210613145936.9902-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:36:23 +02:00
Stanislaw Gruszka
7af305a124 rt2x00: do not set timestamp for injected frames
We setup hardware to insert TSF timestamp for beacon and probe response
frames. This is undesired for injected frames, which might want to
set their own timestamp values, so disable this setting for injected
frames.

Tested-by: ZeroBeat <ZeroBeat@gmx.de>
Tested-by: n0w1re <n0w1re@protonmail.ch>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210504081220.666939-1-stf_xl@wp.pl
2021-06-15 16:36:20 +03:00
Michael Ellerman
478036c4cd powerpc: Fix initrd corruption with relative jump labels
Commit b0b3b2c78e ("powerpc: Switch to relative jump labels") switched
us to using relative jump labels. That involves changing the code,
target and key members in struct jump_entry to be relative to the
address of the jump_entry, rather than absolute addresses.

We have two static inlines that create a struct jump_entry,
arch_static_branch() and arch_static_branch_jump(), as well as an asm
macro ARCH_STATIC_BRANCH, which is used by the pseries-only hypervisor
tracing code.

Unfortunately we missed updating the key to be a relative reference in
ARCH_STATIC_BRANCH.

That causes a pseries kernel to have a handful of jump_entry structs
with bad key values. Instead of being a relative reference they instead
hold the full address of the key.

However the code doesn't expect that, it still adds the key value to the
address of the jump_entry (see jump_entry_key()) expecting to get a
pointer to a key somewhere in kernel data.

The table of jump_entry structs sits in rodata, which comes after the
kernel text. In a typical build this will be somewhere around 15MB. The
address of the key will be somewhere in data, typically around 20MB.
Adding the two values together gets us a pointer somewhere around 45MB.

We then call static_key_set_entries() with that bad pointer and modify
some members of the struct static_key we think we are pointing at.

A pseries kernel is typically ~30MB in size, so writing to ~45MB won't
corrupt the kernel itself. However if we're booting with an initrd,
depending on the size and exact location of the initrd, we can corrupt
the initrd. Depending on how exactly we corrupt the initrd it can either
cause the system to not boot, or just corrupt one of the files in the
initrd.

The fix is simply to make the key value relative to the jump_entry
struct in the ARCH_STATIC_BRANCH macro.

Fixes: b0b3b2c78e ("powerpc: Switch to relative jump labels")
Reported-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reported-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Greg Kurz <groug@kaod.org>
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614131440.312360-1-mpe@ellerman.id.au
2021-06-15 23:35:57 +10:00
Lee Gibson
d10a87a353 wl1251: Fix possible buffer overflow in wl1251_cmd_scan
Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428115508.25624-1-leegib@gmail.com
2021-06-15 16:35:52 +03:00
Tudor Ambarus
d4f23164cf wilc1000: Fix clock name binding
Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
requires an "rtc" clock name.
drivers/net/wireless/microchip/wilc1000/sdio.c is using "rtc" clock name
as well. Comply with the binding in wilc1000/spi.c too.

Fixes: 854d66df74 ("staging: wilc1000: look for rtc_clk clock in spi mode")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428025445.81953-1-tudor.ambarus@microchip.com
2021-06-15 16:35:18 +03:00
zuoqilin
ad4d74cd81 rndis_wlan: simplify is_associated()
It is not necessary to define the variable ret to receive
the return value of the get_bssid() method.

Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210423094940.1593-1-zuoqilin1@163.com
2021-06-15 16:34:19 +03:00
Sergio Paracuellos
5b4f167ef3 staging: mt7621-dts: fix pci address for PCI memory range
Driver code call 'devm_of_pci_get_host_bridge_resources'
to get resources and properly fill 'bridge->windows' and
'bridge->dma_ranges'. After parsing the ranges and store
as resources, at the end it makes a call to pci function
'pci_add_resource_offset' to set the offset for the
memory resource. To calculate offset, resource start address
subtracts pci address of the range. MT7621 does not need
any offset for the memory resource. Moreover, setting an
offset got into 'WARN_ON' calls from pci devices driver code.
Until now memory range pci_addr was being '0x00000000' and
res->start is '0x60000000' but becase pci controller driver
was manually setting resources and adding them using pci function
'pci_add_resource' where a zero is passed as offset, things
was properly working. Since PCI_IOBASE is defined now for
ralink we don't set nothing manually anymore so we have to
properly fix PCI address for this range to make things work
and the new pci address must be set to '0x60000000'. Doing
in this way the subtract result obtain zero as offset
and pci device driver code properly works.

Fixes: d59578da2b ("staging: mt7621-dts: add dts files")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210614100617.28753-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:29 +02:00
Sergio Paracuellos
b15606e63e staging: mt7621-pci: remove 'mt7621_pci_parse_request_of_pci_ranges'
After 'PCI_IOBASE' is defined for ralink, ranges are properly parsed
using pci generic APIS and there is no need to parse anything
manually. So function 'mt7621_pci_parse_request_of_pci_ranges'
used for this can be enterely removed. Since we have to configure
iocu memory regions and pci io windows resources must be retrieved
accordly from 'bridge->windows' but there is no need to store
anything as driver private data.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210614100617.28753-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:29 +02:00
Sergio Paracuellos
222b27713d MIPS: ralink: Define PCI_IOBASE
PCI_IOBASE is used to create VM maps for PCI I/O ports, it is
required by generic PCI drivers to make memory mapped I/O range
work. Hence define it for ralink architectures to be able to
avoid parsing manually IO ranges in PCI generic driver code.
Function 'plat_mem_setup' for ralink is using 'set_io_port_base'
call using '0xa0000000' as address, so use the same address in
the definition to align things.

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210614100617.28753-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:29 +02:00
Fabio Aiuto
e0878ad499 staging: rtl8723bs: remove two unused files from tree
remove unused files from tree, for they are excluded
by the build process.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/ef7c21270ccaa2ee3d48b93d0a16fa55911c6cce.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
56addfb089 staging: rtl8723bs: remove include/autoconf.h header file from tree
remove include/autoconf.h header file from tree.
It just contains a compiler configuration check
which is not needed.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/9317fa8fd41da4668a41775207b5e6dad33e7447.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
414ce135c4 staging: rtl8723bs: move LPS_RPWM_WAIT_MS macro
move LPS_RPWM_WAIT_MS macro from include/autoconf.h to
include/hal_btcoex.h in order to empty unneeded
autoconf.h.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/5756b958b5d279f1cc8cea7887f50d003b17b94e.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
b4e1882d75 staging: rtl8723bs: remove HAL_{BB,MAC,RF,FW}_ENABLE macros
remove HAL_{BB,MAC,RF,FW}_ENABLE macros.
They are used to turn on/off by hand some core
capabilities we want to be always 'on'.

So remove usages and definitions.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/04248acbd22f9be30d21891926e134490b34036a.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
bb1c456d7f staging: rtl8723bs: remove unneeded DISABLE_BB_RF macro
remove unneeded DISABLE_BB_RF macro.

This is just a symbolic constant used to disable
by hand-edit some core hardware capabilities which
we want to be always enabled. So just remove it.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/1a56a6b2f9f846197e8e25769ad86ad23e530047.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
298a52a37a staging: rtl8723bs: remove unused WAKEUP_GPIO_IDX macro definition
remove unused WAKEUP_GPIO_IDX macro definition.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/6bf5ddf3e4465840cdfcca79a524645cdaf0104d.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
6f8b3e04bf staging: rtl8723bs: remove unneeded comments
remove unneeded comments in include/autoconf.h

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/4c1ea0e7ddceebba1afe1485662c204db5dfa9c7.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Fabio Aiuto
a22bda6df2 staging: rtl8723bs: remove unused debug macro
remove unused debug macro definition in
include/autoconf.h

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/4d1e9ad759fc4b66fa3309637b3b4c8eb81d2ea9.1623756906.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 15:24:23 +02:00
Hui Tang
7b7362ba27 wlcore: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621407345-10625-4-git-send-email-tanghui20@huawei.com
2021-06-15 16:16:18 +03:00
Hui Tang
084eb606db rt2x00: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621407345-10625-3-git-send-email-tanghui20@huawei.com
2021-06-15 16:16:17 +03:00
Hui Tang
bd65fe5509 libertas: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621407345-10625-2-git-send-email-tanghui20@huawei.com
2021-06-15 16:16:17 +03:00
Yang Shen
c3b67ea3d9 wlcore: Fix missing function name in comments
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wlcore/cmd.c:824: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/net/wireless/ti/wlcore/cmd.c:853: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/net/wireless/ti/wlcore/cmd.c:882: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-12-shenyang39@huawei.com
2021-06-15 16:10:47 +03:00
Yang Shen
c707db1b2e rsi: Fix missing function name in comments
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/rsi/rsi_91x_mgmt.c:1550: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-10-shenyang39@huawei.com
2021-06-15 16:10:46 +03:00
Yang Shen
9a0fb9502f rtlwifi: Fix wrong function name in comments
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: expecting prototype for writeLLT(). Prototype was for rtl92c_llt_write() instead
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:154: warning: expecting prototype for rtl92c_init_LLT_table(). Prototype was for rtl92c_init_llt_table() instead

Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-9-shenyang39@huawei.com
2021-06-15 16:10:46 +03:00
Yang Shen
30657b8ee4 libertas_tf: Fix wrong function name in comments
Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/marvell/libertas_tf/if_usb.c:56: warning: expecting prototype for if_usb_wrike_bulk_callback(). Prototype was for if_usb_write_bulk_callback() instead

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-8-shenyang39@huawei.com
2021-06-15 16:10:45 +03:00
Sergey Larin
184b69c5d3 mfd: max8907: Remove IRQF_NO_AUTOEN flag
IRQF_NO_AUTOEN flag doesn't go well with IRQF_SHARED flag - the
check in request_threaded_irq fails and exits with EINVAL.

So we ignore the flag and enable it on the first IRQ request. No
interrupt should arrive from the chip as all interrupts are masked
by default.

Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15 13:18:58 +01:00
Zhen Lei
afb349c096 mfd: ab8500-core: Use DEVICE_ATTR_RO/RW macro
Use DEVICE_ATTR_RO/RW macro helper instead of plain DEVICE_ATTR, which
makes the code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15 13:15:07 +01:00
Zhen Lei
5089e34f7b mfd: intel_soc_pmic_bxtwc: Use DEVICE_ATTR_ADMIN_RW macro
Use DEVICE_ATTR_ADMIN_RW macro helper instead of plain DEVICE_ATTR, which
makes the code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15 13:14:45 +01:00
Zhen Lei
24676b3ef8 mfd: janz-cmodio: Use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO macro helper instead of plain DEVICE_ATTR, which makes
the code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15 13:14:23 +01:00
周琰杰 (Zhou Yanjie)
870a6e1539 clocksource/drivers/ingenic: Rename unreasonable array names
1.Rename the "ingenic_ost_clk_info[]" to "x1000_ost_clk_info[]" to
  facilitate the addition of OST support for X2000 SoC in a later
  commit

2.When the OST support for X2000 SoC is added, there will be two
  compatible strings, so renaming "ingenic_ost_of_match[]" to
  "ingenic_ost_of_matches[]" is more reasonable

3.Remove the unnecessary comma in "ingenic_ost_of_matches[]" to reduce
  code size as much as possible.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1622824306-30987-2-git-send-email-zhouyanjie@wanyeetech.com
2021-06-15 14:14:14 +02:00
Tony Lindgren
9517c577f9 clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.

Fixes: b34677b099 ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
2021-06-15 14:14:14 +02:00
Evan Benn
75ac5cc2ee clocksource/drivers/mediatek: Ack and disable interrupts on suspend
Interrupts are disabled during suspend before this driver disables its
timers. ARM trusted firmware will abort suspend if the timer irq is
pending, so ack and disable the timer interrupt during suspend.

Signed-off-by: Evan Benn <evanbenn@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210512122528.v4.1.I1d9917047de06715da16e1620759f703fcfdcbcb@changeid
2021-06-15 14:14:03 +02:00
Zhen Lei
cd5bde2ce8 mfd: kempld-core: Use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO macro helper instead of plain DEVICE_ATTR, which makes
the code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15 13:13:54 +01:00
Jiri Slaby
3ec2ff3723 tty: make use of tty_get_{char,frame}_size
In the previous patch, we introduced tty_get_char_size() and
tty_get_frame_size() for computing character and frame sizes,
respectively. Here, we make use of them in various tty drivers where
applicable.

The stats look nice: 12 insertions, 169 deletions.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Oliver Neukum <oneukum@suse.com>
Acked-by: Alex Elder <elder@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210610090247.2593-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 14:03:27 +02:00