Commit graph

1,044,825 commits

Author SHA1 Message Date
Vineet Gupta
96f1b00138 ARCv2: save ABI registers across signal handling
ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).

This patch fixes the issue by
 - adding arcv2 ABI regs to kernel struct sigcontext
 - populating them during signal handling

Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
 - it has only been extended (existing fields are not touched)
 - the old sigcontext was ABI incomplete to begin with anyways

Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: <stable@vger.kernel.org>
Tested-by: kernel test robot <lkp@intel.com>
Reported-by: Vladimir Isaev <isaev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-06-10 17:21:38 -07:00
David S. Miller
232e3683b4 Merge branch 'mptcp-fixes'
Mat Martineau says:

====================
mptcp: More v5.13 fixes

Here's another batch of MPTCP fixes for v5.13.

Patch 1 cleans up memory accounting between the MPTCP-level socket and
the subflows to more reliably transfer forward allocated memory under
pressure.

Patch 2 wakes up socket readers more reliably.

Patch 3 changes a WARN_ONCE to a pr_debug.

Patch 4 changes the selftests to only use syncookies in test cases where
they do not cause spurious failures.

Patch 5 modifies socket error reporting to avoid a possible soft lockup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
499ada5073 mptcp: fix soft lookup in subflow_error_report()
Maxim reported a soft lookup in subflow_error_report():

 watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0]
 RIP: 0010:native_queued_spin_lock_slowpath
 RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202
 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88
 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4
 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88
 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700
 FS:  0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0
 Call Trace:
  <IRQ>
 _raw_spin_lock_bh
 subflow_error_report
 mptcp_subflow_data_available
 __mptcp_move_skbs_from_subflow
 mptcp_data_ready
 tcp_data_queue
 tcp_rcv_established
 tcp_v4_do_rcv
 tcp_v4_rcv
 ip_protocol_deliver_rcu
 ip_local_deliver_finish
 __netif_receive_skb_one_core
 netif_receive_skb
 rtl8139_poll 8139too
 __napi_poll
 net_rx_action
 __do_softirq
 __irq_exit_rcu
 common_interrupt
  </IRQ>

The calling function - mptcp_subflow_data_available() - can be invoked
from different contexts:
- plain ssk socket lock
- ssk socket lock + mptcp_data_lock
- ssk socket lock + mptcp_data_lock + msk socket lock.

Since subflow_error_report() tries to acquire the mptcp_data_lock, the
latter two call chains will cause soft lookup.

This change addresses the issue moving the error reporting call to
outer functions, where the held locks list is known and the we can
acquire only the needed one.

Reported-by: Maxim Galaganov <max@internet.ru>
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
2395da0e17 selftests: mptcp: enable syncookie only in absence of reorders
Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.

Fixes: fed61c4b58 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
61e710227e mptcp: do not warn on bad input from the network
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.

Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.

Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
99d1055ce2 mptcp: wake-up readers only for in sequence data
Currently we rely on the subflow->data_avail field, which is subject to
races:

	ssk1
		skb len = 500 DSS(seq=1, len=1000, off=0)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk2
		skb len = 500 DSS(seq = 501, len=1000)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk1
		skb len = 500 DSS(seq = 1, len=1000, off =500)
		# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
		# as the skb is covered by a pre-existing map,
		# which was in-sequence at reception time.

Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().

Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.

Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:44 -07:00
Paolo Abeni
72f961320d mptcp: try harder to borrow memory from subflow under pressure
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.

The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.

Instead, directly move the required amount of pages from the
ssk to the msk, if available

Fixes: 9c3f94e168 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:44 -07:00
Jisheng Zhang
42e0e0b453
riscv: code patching only works on !XIP_KERNEL
Some features which need code patching such as KPROBES, DYNAMIC_FTRACE
KGDB can only work on !XIP_KERNEL. Add dependencies for these features
that rely on code patching.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-10 16:33:50 -07:00
Vitaly Wool
5e63215c2f
riscv: xip: support runtime trap patching
RISCV_ERRATA_ALTERNATIVE patches text at runtime which is currently
not possible when the kernel is executed from the flash in XIP mode.
Since runtime patching concerns only traps at the moment, let's just
have all the traps reside in RAM anyway if RISCV_ERRATA_ALTERNATIVE
is set. Thus, these functions will be patch-able even when the .text
section is in flash.

Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-10 16:16:06 -07:00
Logan Gunthorpe
3ec0c3ec2d PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
In order to use upstream_bridge_distance_warn() from a dma_map function, it
must not sleep. However, pci_get_slot() takes the pci_bus_sem so it might
sleep.

In order to avoid this, try to get the host bridge's device from the first
element in the device list. It should be impossible for the host bridge's
device to go away while references are held on child devices, so the first
element should not be able to change and, thus, this should be safe.

Introduce a static function called pci_host_bridge_dev() to obtain the host
bridge's root device.

Link: https://lore.kernel.org/r/20210610160609.28447-7-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:55 -05:00
Logan Gunthorpe
7e2faa1710 PCI/P2PDMA: Refactor pci_p2pdma_map_type()
All callers of pci_p2pdma_map_type() have a struct dev_pgmap and a struct
device (of the client doing the DMA transfer). Thus move the conversion to
struct pci_devs for the provider and client into this function.

Link: https://lore.kernel.org/r/20210610160609.28447-6-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:41 -05:00
Logan Gunthorpe
cf201bfe8c PCI/P2PDMA: Warn if host bridge not in whitelist
If the host bridge is not in the whitelist print a warning in the
calc_map_type_and_dist_warn() path detailing the vendor and device IDs that
would need to be added to the whitelist.

Suggested-by: Don Dutile <ddutile@redhat.com>
Link: https://lore.kernel.org/r/20210610160609.28447-5-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:41 -05:00
Logan Gunthorpe
f9c125b9eb PCI/P2PDMA: Use correct calc_map_type_and_dist() return type
Instead of using an int for the return value of this function, use the
correct enum pci_p2pdma_map_type.

Link: https://lore.kernel.org/r/20210610160609.28447-4-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:41 -05:00
Logan Gunthorpe
e4ece59abd PCI/P2PDMA: Collect acs list in stack buffer to avoid sleeping
In order to call the calc_map_type_and_dist_warn() function from a dma_map
operation, the function must not sleep. The only reason it sleeps is to
allocate memory for the seq_buf to print a verbose warning telling the user
how to disable ACS for that path.

Instead of allocating the memory with kmalloc(), allocate a smaller buffer
on the stack. A 128 byte buffer is enough to print 10 PCI device names. A
system with 10 bridge ports between two devices that have ACS enabled would
be unusually large, so this should still be a reasonable limit.

This also cleans up the awkward (and broken) return with -ENOMEM which
contradicts the return type and the caller was not prepared for.

Link: https://lore.kernel.org/r/20210610160609.28447-3-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:41 -05:00
Logan Gunthorpe
6389d43745 PCI/P2PDMA: Rename upstream_bridge_distance() and rework doc
The function upstream_bridge_distance() has evolved such that its name is
no longer entirely reflective of what the function does.  It not only
calculates the distance between two peers but also calculates how the DMA
addresses for those two peers should be mapped.

Rename it to calc_map_type_and_dist() and rework the documentation to
better describe the two pieces of information the function returns.

[bhelgaas: tweak comment wording]
Link: https://lore.kernel.org/r/20210610160609.28447-2-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-10 18:01:24 -05:00
Linus Walleij
a3a5f9d0fb drm/panel: db7430: Add driver for Samsung DB7430
This adds a new driver for the Samsung DB7430 DPI display
controller as controlled over SPI.

Right now the only panel product we know that is using this
display controller is the LMS397KF04 but there may be more.

This is the first regular panel driver making use of the
MIPI DBI helper library. The DBI "device" portions can not
be used because that code assumes the use of a single
regulator and specific timings around the reset pulse that
do not match the DB7430 datasheet.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Doug Anderson <dianders@chromium.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610220527.366432-1-linus.walleij@linaro.org
2021-06-11 00:43:45 +02:00
Pavel Begunkov
9690557e22 io_uring: add feature flag for rsrc tags
Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b995d4045b6c6b4ab7510ca124fd25ac2203af7.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:33:51 -06:00
Pavel Begunkov
992da01aa9 io_uring: change registration/upd/rsrc tagging ABI
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.

It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.

Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:33:51 -06:00
Finn Thain
44b1fbc0f5 m68k/q40: Replace q40ide driver with pata_falcon and falconide
This allows m68k q40 systems to switch from the deprecated IDE subsystem
to libata.

Enhance the byte-swapping falconide and pata_falcon platform drivers to
accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem
to co-exist with q40 IRQ arrangements without too much mess.

The new IO resources were added solely for the purpose of making
request_region() reservations identical to those made by q40ide: these
regions aren't used for actual IO.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:30:12 -06:00
Finn Thain
cabd10be0b m68k/mac: Replace macide driver with generic platform drivers
This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.

This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.

BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:30:11 -06:00
David S. Miller
76cf404c40 Merge branch 'ipa-mem-2'
Alex Elder says:

====================
net: ipa: memory region rework, part 2

This is the second portion of a set of patches updating the IPA
memory region code.

In this portion (part 2), the focus is on adjusting the code so that
it no longer assumes the memory region descriptor array is indexed
by the region identifier.  This brings with it some related cleanup.

Three loops are changed so their loop index variable is an unsigned
rather than an enumerated type.

A set of functions is changed so a region identifier (rather than a
memory region descriptor pointer) is passed as argument, to simplify
their call sites.  This isn't entirely related or required, but I
think it improves the code.

A validation function for filter and route table memory regions is
changed to take memory region IDs, rather than determining which
region to validate based on a set of Boolean flags.

Finally, ipa_mem_find() is created to abstract getting a memory
descriptor based on its ID, and it is used everywhere rather than
indexing the array.  With that implemented, all of the memory
regions can be defined by arrays of entries defined without
providing index designators.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
c61cfb941d net: ipa: don't index mem data array by ID
Finally the code handles the IPA memory region array in the
configuration data without assuming it is indexed by region ID.
Get rid of the array index designators where these arrays are
initialized.  As a result, there's no more need to define an
explicitly undefined memory region ID, so get rid of that.

Change ipa_mem_find() so it no longer assumes the ipa->mem[] array
is indexed by memory region ID.  Instead, have it search the array
for the entry having the requested memory ID, and return the address
of the descriptor if found.  Otherwise return NULL.

Stop allowing memory regions to be defined with zero size and zero
canary value.  Check for this condition in ipa_mem_valid_one().
As a result, it is not necessary to check for this case in
ipa_mem_config().

Finally, there is no need for IPA_MEM_UNDEFINED to be defined any
more, so get rid of it.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
5e3bc1e5d0 net: ipa: introduce ipa_mem_find()
Introduce a new function that abstracts finding information about a
region in IPA-local memory, given its memory region ID.  For now it
simply uses the region ID as an index into the IPA memory array.
If the region is not defined, ipa_mem_find() returns a null pointer.

Update all code that accesses the ipa->mem[] array directly to use
ipa_mem_find() instead.  The return value must be checked for null
when optional memory regions are sought.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
e9f5b2766e net: ipa: pass memory id to ipa_table_valid_one()
Stop passing most of the Boolean flags to ipa_table_valid_one(), and
just pass a memory region ID to it instead.  We still need to
indicate whether we're operating on a routing or filter table.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
25116645db net: ipa: pass mem_id to ipa_table_reset_add()
Pass a memory region ID rather than the address of a memory region
descriptor to ipa_table_reset_add() to simplify callers.  Similarly,
pass memory region IDs to ipa_table_init_add().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
ce928bf8fe net: ipa: pass mem ID to ipa_mem_zero_region_add()
Pass a memory region ID rather than the address of a memory region
descriptor to ipa_mem_zero_region_add() to simplify callers.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
07c525a62a net: ipa: pass mem_id to ipa_filter_reset_table()
Pass a memory region ID rather than the address of a memory region
descriptor to ipa_filter_reset_table(), to simplify callers.

We can eliminate the check for a zero region size in this function
because ipa_table_reset_add() checks that before adding anything to
the transaction.

Note that here and in subsequent commits there is no need to check
whether a memory region exists, because we will have already
verified that during initialization.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
ce05a9f396 net: ipa: clean up header memory validation
Do some general cleanup in ipa_cmd_header_valid():
  - Delay assigning the mem variable until just before it's used.
  - Assign the maximum offset and size values together.
  - Improve comments explaining the single range of memory being
    made up of a modem portion and an AP portion.
  - Record the offset of the combined range in a local variable.
  - Do the initial size assignment right after assigning the offset.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Alex Elder
8cc7ebbf5f net: ipa: don't assume mem array indexed by ID
Change ipa_mem_valid() to iterate over the entries using a u32 index
variable rather than using a memory region ID.  Use the ID found
inside the memory descriptor rather than the loop index.

Change ipa_mem_size_valid() to iterate over the entries but without
assuming the array index is the memory region ID.  "Empty" entries
will have zero size; and we'll temporarily assume such entries have
zero offset as well (they all do, currently).

Similarly, don't assume the mem[] array is indexed by ID in
ipa_mem_config().  There, "empty" entries will have a zero canary
count, so no special assumptions are needed to handle them correctly.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:50:08 -07:00
Jamin Lin
810e444194 dt-bindings: aspeed-i2c: Convert txt to yaml format
Convert aspeed i2c to yaml.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Link: https://lore.kernel.org/r/20210603024839.27976-2-jamin_lin@aspeedtech.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-06-10 16:49:27 -05:00
Cristobal Forno
53f8b1b254 ibmvnic: Allow device probe if the device is not ready at boot
Allow the device to be initialized at a later time if
it is not available at boot. The device will be allowed to probe but
will be given a "down" state. After completing device probe and
registering the net device, the driver will await an interrupt signal
from its partner device, indicating that it is ready for boot. The
driver will schedule a work event to perform the necessary procedure
and begin operation.

Co-developed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:35:07 -07:00
David S. Miller
22488e4550 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix a crash when stateful expression with its own gc callback
   is used in a set definition.

2) Skip IPv6 packets from any link-local address in IPv6 fib expression.
   Add a selftest for this scenario, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:33:56 -07:00
David S. Miller
0280f429dc Merge branch 'tcp-options-oob-fixes'
Maxim Mikityanskiy says:

====================
Fix out of bounds when parsing TCP options

This series fixes out-of-bounds access in various places in the kernel
where parsing of TCP options takes place. Fortunately, many more
occurrences don't have this bug.

v2 changes:

synproxy: Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

sch_cake: Added doff validation to avoid parsing garbage.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
ba91c49ded sch_cake: Fix out of bounds when parsing TCP options and header
The TCP option parser in cake qdisc (cake_get_tcpopt and
cake_tcph_may_drop) could read one byte out of bounds. When the length
is 1, the execution flow gets into the loop, reads one byte of the
opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads
one more byte, which exceeds the length of 1.

This fix is inspired by commit 9609dad263 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP
header. Although it wasn't strictly an out-of-bounds access (memory was
allocated), garbage values could be read where CAKE expected the TCP
header if doff was smaller than 5.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 8b7138814f ("sch_cake: Add optional ACK filter")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
07718be265 mptcp: Fix out of bounds when parsing TCP options
The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.

This fix is inspired by commit 9609dad263 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
5fc177ab75 netfilter: synproxy: Fix out of bounds when parsing TCP options
The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.

This fix is inspired by commit 9609dad263 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 48b1de4c11 ("netfilter: add SYNPROXY core/target")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
David S. Miller
1b6c2151db Merge branch 'marvell-prestera-lag'
Vadym Kochan says:

====================
net: marvell: prestera: add LAG support

The following features are supported:

    - LAG basic operations
        - create/delete LAG
        - add/remove a member to LAG
        - enable/disable member in LAG
    - LAG Bridge support
    - LAG VLAN support
    - LAG FDB support

Limitations:

    - Only HASH lag tx type is supported
    - The Hash parameters are not configurable. They are applied
      during the LAG creation stage.
    - Enslaving a port to the LAG device that already has an
      upper device is not supported.

Changes extracted from:

    https://lkml.org/lkml/2021/2/3/877

and marked with "v2".

v2:

    There are 2 additional preparation patches which simplifies the
    netdev topology handling.

    1) Initialize 'lag' with NULL in prestera_lag_create()             [suggested by Vladimir Oltean]

    2) Use -ENOSPC in prestera_lag_port_add() if max lag               [suggested by Vladimir Oltean]
       numbers were reached.

    3) Do not propagate netdev events to prestera_switchdev            [suggested by Vladimir Oltean]
       but call bridge specific funcs. It simplifies the code.

    4) Check on info->link_up in prestera_netdev_port_lower_event()    [suggested by Vladimir Oltean]

    5) Return -EOPNOTSUPP in prestera_netdev_port_event() in case      [suggested by Vladimir Oltean]
       LAG hashing mode is not supported.

    6) Do not pass "lower" netdev to bridge join/leave functions.      [suggested by Vladimir Oltean]
       It is not need as offloading settings applied on particular
       physical port. It requires to do extra upper dev lookup
       in case port is in the LAG which is in the bridge on vlans add/del.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:20:44 -07:00
Serhiy Boiko
255213ca68 net: marvell: prestera: add LAG support
The following features are supported:

    - LAG basic operations
        - create/delete LAG
        - add/remove a member to LAG
        - enable/disable member in LAG
    - LAG Bridge support
    - LAG VLAN support
    - LAG FDB support

Limitations:

    - Only HASH lag tx type is supported
    - The Hash parameters are not configurable. They are applied
      during the LAG creation stage.
    - Enslaving a port to the LAG device that already has an
      upper device is not supported.

Co-developed-by: Andrii Savka <andrii.savka@plvision.eu>
Signed-off-by: Andrii Savka <andrii.savka@plvision.eu>
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Co-developed-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:20:44 -07:00
Vadym Kochan
82bbaa05bf net: marvell: prestera: do not propagate netdev events to prestera_switchdev.c
Replace prestera_bridge_port_event(...) by
prestera_bridge_port_join(...) and prestera_bridge_port_leave().

It simplifies the code by reading netdev event specific handling only
once in prestera_main.c

Signed-off-by: Vadym Kochan <vkochan@marvell.com>
CC: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:20:44 -07:00
Vadym Kochan
3d5048cc54 net: marvell: prestera: move netdev topology validation to prestera_main
Move handling of PRECHANGEUPPER event from prestera_switchdev to
prestera_main which is responsible for basic netdev events handling
and routing them to related module.

Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:20:44 -07:00
Eric Dumazet
d1b5bee4c8 net/packet: annotate data race in packet_sendmsg()
There is a known race in packet_sendmsg(), addressed
in commit 32d3182cd2 ("net/packet: fix race in tpacket_snd()")

Now we have data_race(), we can use it to avoid a future KCSAN warning,
as syzbot loves stressing af_packet sockets :)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:12:54 -07:00
Eric Dumazet
b71eaed8c0 inet: annotate date races around sk->sk_txhash
UDP sendmsg() path can be lockless, it is possible for another
thread to re-connect an change sk->sk_txhash under us.

There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE()
pair to document the race.

BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w

write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1:
 sk_set_txhash include/net/sock.h:1937 [inline]
 __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75
 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189
 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580
 __sys_connect_file net/socket.c:1837 [inline]
 __sys_connect+0x245/0x280 net/socket.c:1854
 __do_sys_connect net/socket.c:1864 [inline]
 __se_sys_connect net/socket.c:1861 [inline]
 __x64_sys_connect+0x3d/0x50 net/socket.c:1861
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0:
 skb_set_hash_from_sk include/net/sock.h:2211 [inline]
 skb_set_owner_w+0x118/0x220 net/core/sock.c:2101
 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359
 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373
 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621
 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983
 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xbca3c43d -> 0xfdb309e0

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:12:54 -07:00
Eric Dumazet
f13ef10059 net: annotate data race in sock_error()
sock_error() is known to be racy. The code avoids
an atomic operation is sk_err is zero, and this field
could be changed under us, this is fine.

Sysbot reported:

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write to 0xffff888131855630 of 4 bytes by task 9365 on cpu 1:
 unix_release_sock+0x2e9/0x6e0 net/unix/af_unix.c:550
 unix_release+0x2f/0x50 net/unix/af_unix.c:859
 __sock_release net/socket.c:599 [inline]
 sock_close+0x6c/0x150 net/socket.c:1258
 __fput+0x25b/0x4e0 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0xae/0x130 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
 exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301
 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888131855630 of 4 bytes by task 9385 on cpu 0:
 sock_error include/net/sock.h:2269 [inline]
 sock_alloc_send_pskb+0xe4/0x4e0 net/core/sock.c:2336
 unix_dgram_sendmsg+0x478/0x1610 net/unix/af_unix.c:1671
 unix_seqpacket_sendmsg+0xc2/0x100 net/unix/af_unix.c:2055
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 __sys_sendmsg_sock+0x25/0x30 net/socket.c:2416
 io_sendmsg fs/io_uring.c:4367 [inline]
 io_issue_sqe+0x231a/0x6750 fs/io_uring.c:6135
 __io_queue_sqe+0xe9/0x360 fs/io_uring.c:6414
 __io_req_task_submit fs/io_uring.c:2039 [inline]
 io_async_task_func+0x312/0x590 fs/io_uring.c:5074
 __tctx_task_work fs/io_uring.c:1910 [inline]
 tctx_task_work+0x1d4/0x3d0 fs/io_uring.c:1924
 task_work_run+0xae/0x130 kernel/task_work.c:164
 tracehook_notify_signal include/linux/tracehook.h:212 [inline]
 handle_signal_work kernel/entry/common.c:145 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0xf8/0x190 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301
 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x00000068

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 9385 Comm: syz-executor.3 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:12:54 -07:00
Tan Zhongjun
950fd045d7 soc: qcom: ipa: Remove superfluous error message around platform_get_irq()
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.

Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:10:23 -07:00
Miquel Raynal
d3d0e1e857 dt-binding: memory: pl353-smc: Convert to yaml
Convert this binding file to yaml schema.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-10-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-10 23:09:05 +02:00
Baokun Li
cb8e2e4300 dccp: tfrc: fix doc warnings in tfrc_equation.c
Add description for `tfrc_invert_loss_event_rate` to fix the W=1 warnings:

 net/dccp/ccids/lib/tfrc_equation.c:695: warning: Function parameter or
  member 'loss_event_rate' not described in 'tfrc_invert_loss_event_rate'

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:08:49 -07:00
Wang Hai
73e42909ef atm: Use list_for_each_entry() to simplify code in resources.c
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:08:09 -07:00
Wang Hai
3e98ae0014 ibmvnic: Use list_for_each_entry() to simplify code in ibmvnic.c
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:08:09 -07:00
Wang Hai
bc831facf8 net: x25: Use list_for_each_entry() to simplify code in x25_route.c
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:08:09 -07:00
David S. Miller
172947ac67 Merge branch 'bridge-egress-fixes'
Nikolay Aleksandrov says:

====================
net: bridge: vlan tunnel egress path fixes

These two fixes take care of tunnel_dst problems in the vlan tunnel egress
path. Patch 01 fixes a null ptr deref due to the lockless use of tunnel_dst
pointer without checking it first, and patch 02 fixes a use-after-free
issue due to wrong dst refcounting (dst_clone() -> dst_hold_safe()).

Both fix the same commit and should be queued for stable backports:
Fixes: 11538d039a ("bridge: vlan dst_metadata hooks in ingress and egress paths")

v2: no changes, added stable list to CC
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:06:43 -07:00