Commit graph

1,044,825 commits

Author SHA1 Message Date
Greg Kroah-Hartman
4ccf359849
spi: remove spi_set_cs_timing()
No one seems to be using this global and exported function, so remove it
as it is no longer needed.

Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210609071918.2852069-1-gregkh@linuxfoundation.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-09 11:55:46 +01:00
Mark Brown
916cccb507
ASoC: rt5645: Avoid upgrading static warnings to errors
One of the fixes reverted as part of the UMN fallout was actually fine,
however rather than undoing the revert the process that handled all this
stuff resulted in a patch which attempted to add extra error checks
instead.  Unfortunately this new change wasn't really based on a good
understanding of the subsystem APIs and bypassed the usual patch flow
without ensuring it was reviewed by people with subsystem knowledge and
was merged as a fix rather than during the merge window.

The effect of the new fix is to upgrade what were previously warnings on
static data in the code to hard errors on that data.  If this actually
happens then it would break existing systems, if it doesn't happen then
the change has no effect so this was not a safe change to apply as a fix
to the release candidates.  Since the new code has not been tested and
doesn't in practice improve error handling revert it instead, and also
drop the original revert since the original fix was fine.  This takes
the driver back to what it was in -rc1.

Fixes: 5e70b8e22b ("ASoC: rt5645: add error checking to rt5645_probe function")
Fixes: 1e0ce84215 ("Revert "ASoC: rt5645: fix a NULL pointer dereference")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-09 11:54:36 +01:00
Mark Brown
c441bfb5f2 Linux 5.13-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmCqzFgeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIgQH/3nAV/fYbUCubEQe
 RXUcjMGznIpdHeMiY/hPezObYnpBI3UAi2JwHCvQfoE8ckbx4tq8Xp+TUWebsdaf
 zpDhKXDj2jHha1f5AixHCn1UFxiqOSn3d2muY2Bh1Nhg7iJuzU8xjIMCcOdss+fp
 8e4wqidOHkpWvGJ96CQ5zCNxeXI+/f7VX2IgdJ+RCDwzbqJlIvvXwAkg1KrguUEz
 EPmhpODqjPbVVc/mhtguMLMWl78WKCTBOSHCcYBolatXfm2ojsnX1hXprypWY4Mg
 vKXxF/91AS8InCC08Jw+puz+fXDBx1jtNmFFhDOFTyz/TvwPaKZiWbAeXOZFJA2Z
 Wm4su7g=
 =cqxg
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDAnXkACgkQJNaLcl1U
 h9Co7Qf+O2ajcRpjU5T3KkSqCcVF/T2vjfwWVzh11FXqdkwYbCEFrJD/h6YL1Sx/
 o66dRfJYdqiAZDu0ifk1vtBcXvoPg/+w8TEoLHHE+sovgsOAJPM7ucuBfs4mtaY0
 ek3SKsNBENvivOPCAzWYbK74m7eR4hDr0i7BVsdarduwf5ZtFgJp+eYgKCMroiSa
 OWgWn29/OYSJSNmsFuhwBMDzEr/xkYYYLTUzGeoDmX+rlQos1weW6r12KKDmGoKh
 FlxGroHrBPjTThu+gL0XiOS/GdgQtWHTTaLix0CDTUZWAcfkxC4sd3d45569p+E4
 4GOBEVOhGr8/uyYWffGVh0OlZfZYFA==
 =6IBw
 -----END PGP SIGNATURE-----

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3
2021-06-09 11:52:35 +01:00
Shawn Guo
22c2d71891 iommu/arm-smmu-qcom: Protect acpi_match_platform_list() call with CONFIG_ACPI
The struct acpi_platform_list and function acpi_match_platform_list()
defined in include/linux/acpi.h are available only when CONFIG_ACPI is
enabled.  Add protection to fix the build issues with !CONFIG_ACPI.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210609015511.3955-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-09 11:52:20 +01:00
Thomas Gleixner
510b80a6a0 x86/pkru: Write hardware init value to PKRU when xstate is init
When user space brings PKRU into init state, then the kernel handling is
broken:

  T1 user space
     xsave(state)
     state.header.xfeatures &= ~XFEATURE_MASK_PKRU;
     xrstor(state)

  T1 -> kernel
     schedule()
       XSAVE(S) -> T1->xsave.header.xfeatures[PKRU] == 0
       T1->flags |= TIF_NEED_FPU_LOAD;

       wrpkru();

     schedule()
       ...
       pk = get_xsave_addr(&T1->fpu->state.xsave, XFEATURE_PKRU);
       if (pk)
	 wrpkru(pk->pkru);
       else
	 wrpkru(DEFAULT_PKRU);

Because the xfeatures bit is 0 and therefore the value in the xsave
storage is not valid, get_xsave_addr() returns NULL and switch_to()
writes the default PKRU. -> FAIL #1!

So that wrecks any copy_to/from_user() on the way back to user space
which hits memory which is protected by the default PKRU value.

Assumed that this does not fail (pure luck) then T1 goes back to user
space and because TIF_NEED_FPU_LOAD is set it ends up in

  switch_fpu_return()
      __fpregs_load_activate()
        if (!fpregs_state_valid()) {
  	 load_XSTATE_from_task();
        }

But if nothing touched the FPU between T1 scheduling out and back in,
then the fpregs_state is still valid which means switch_fpu_return()
does nothing and just clears TIF_NEED_FPU_LOAD. Back to user space with
DEFAULT_PKRU loaded. -> FAIL #2!

The fix is simple: if get_xsave_addr() returns NULL then set the
PKRU value to 0 instead of the restrictive default PKRU value in
init_pkru_value.

 [ bp: Massage in minor nitpicks from folks. ]

Fixes: 0cecca9d03 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144346.045616965@linutronix.de
2021-06-09 12:12:45 +02:00
Greg Kroah-Hartman
6771fb0b94 1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
 drivers.
 
 Note an immutable branch merged to add a stub for i2c_verify_client()
 as needed to avoid a build issue in the fxls8962af driver as a result of a
 workaround for a device errata that only applies when i2c interface is used.
 
 Counters
 ========
 
 New device support
 * intel,quadrature encoder peripheral found on Elkhart Lake platforms.
   - New driver.
 
 IIO
 ===
 
 New device support
 * amstaos,tsl2591 ambient light sensor.
   - New driver + bindings
   - Follow up fix to ensure some local variables are suitable for error
     handling.
 * fsl,fxls8962af + fsl,fxls8964af accelerometers
   - New driver + bindings
   - Includes an errata work around that cause a build bot failure fixed
     by adding a stub to i2c.
 * kionix,kxcjk-1013
   - Add support for KX023-1025 device.  Mostly a different register map
     that needed to be supported.
 * murata,sca3300 accelerometer
   - New driver + bindings
 * st,lsm9ds0 IMU
   - Rework of st,sensors driver to cleanly support this new glue driver
     that enables the two parts of the LSM9DS0.
 * ti,tsc2046 touchscreen controller ADC.
   - New driver. Intent here is to use this with existing IIO consumer
     drivers such as resistive-adc-touch.
   - Follow up fix to avoid an issue with unsigned subtraction in error
     check.
 * ti,tmp117 digital temperature sensor
   - New driver + bindings
 
 Features
 * adi,ad5755
   - Add missing dt-binding doc
 * adi,ad7298
   - Add ACPI ID used on Intel Galileo Gen 1 boards.
   - Add missing dt-binding doc
 * adi,ad7476
   - Add missing dt-binding doc
 * adi,ad7746
   - Add missing dt-binding doc for this driver that will hopefully move out
     of staging shortly. Update staging driver to use the binding instead of
     platform data.
 * adi,adis16201 + adis16209
   - Add missing dt-binding doc
 * adi,adis16480
   - Support burst mode for adis16495 and adis16497 parts.
 * bosch,bma220
   - Add missing dt-binding doc
 * fsl,mma7455
   - Add missing dt-binding doc
 * iio-rescale
   - Support handling of processed channels from provider.  Some ADCs
     require (typically non linear) calibration functions to be applied,
     and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
     used as providers to the iio-rescale driver which needs to handle them
     somewhat differently from IIO_CHAN_INFO_RAW
 * sensiron,sps30
   - Support the serial interface.  Note this required significant
     refactoring of existing driver.
 * st,st-sensors
   - Add mount matrix support for normal dt-binding whilst continuing to
     support the odd ACPI approach for accelerometers.
 * ti,dac082s085 + similar
   - Add missing dt-binding doc
 * trivial-devices - add entries for
   - memsic,mx4005, memsic,mx6255 and memsic,mxc6655
   - sensortek,stk8312 and sensortek,stk8ba50
 
 Cleanup / minor fixes
 * core
   - Use devm_add_action_or_reset() to replace boilerplate in several
     driver and core IIO devm_* functions.
   - Fix an error path issue introduced by above, that could return an
     error pointer rather than the expected null from dev_iio_device_alloc()
   - Move more IIO internals related fields from struct iio_dev to
     struct iio_dev_opaque.
   - Drop unused final update of in_loc in demux setup.
 * Docs
   - Move some docs from driver specific to core dos to avoid replication
     of names which the documentation builder does not allow.
     Note this means adding a few device specific notes to the general docs
     to cover the more unusual uses of the ABI.
   - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
     have the bufferX/* variant.  Not we are not getting rid of these
     interfaces, just encouraging new code to use the new interface.
 * IIO wide:
   - Tidy up new cases of dev.parent etc being set in drivers as the core
     now does it.
   - Fix more cases of possible miss-aligned buffers when passed to
     iio_push_to_buffers_with_timestamp().  Note we only have one known
     instance of anyone seeing this bug actually happening, so this has been
     a low priority cleanup effort for several cycles.
   - sysfs_emit() used in more drivers.
   - Runtime pm tidy up and use of pm_runtime_resume_and_get()
   - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
     that the timestamp when inserted by naturally aligned + consumers can
     assume that all fields are naturally aligned. Part of a long running
     effort, with at least 2 more series to come tackling additional
     variants.
   - Stop specifying "mount-matrix" property name in every lookup of the
     mount matrix from firmware by hard coding it in the core.
 * adi,ad7476
   - Handle the variety of different regulators used by the parts supported
     by this driver (came up in dt-binding review)
 * adi,ad7746
   - Trivial drop of if (ret) return ret; return 0; pattern
   - Tidy up comments
   - Pull capdac setup out to own function.
 * adi,ad7766
   - Trivial drop of if (ret) return ret; return 0; pattern
 * adi,adis
   - Avoid returning error codes in interrupt handlers.
   - Handle a failure in spi_write in the trigger handler.
   - Rework to add updating of device page after changing it.
   - Don't push data to IIO buffers when read failed.
   - Add configuration of burst max speed to core avoid handling this in
     each driver.
   - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
   - Excessive includes cleanup via include-what-you-use static checker
     after zero day highlighted that these needed updating.
 * afe
   - Amend binding to add #io-channel-cells, thus allowing this IIO
     consumer to also be an IIO provider.
 * aosong,am2315
   - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
     ACPI naming.
 * bosch,bma180
   - Adding missing bandwidth settings (500, 1000 Hz)
 * bosch,bme680
   - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
     ACPI naming.
 * ep93xx_adc,
   - Drop a redundant error print.
 * maxim,max118
   - Convert remainder of probe() to devm_ managed functions.
   - Avoid some repeated jumping back and forth between iio_dev and
     spi structures.
 * maxim,max11100
   - Use get_unaligned_be16() instead of open coding.
   - Convert remainder of probe() to devm_ managed functions.
 * samsung,exynos_adc
   - Unused error value dropped.
 * sensiron,sgp30
   - Drop use of %hx in favor of %x and letting the normal type conversion
     work.
 * sensortek,stk8312
   - Add lowercase device id and note uppercase version deprecated.
   - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
     ACPI naming.
 * sprx,sc72xx_adc
   - add MODULE_DEVICE_TABLE
 * st,lsm6dsx
   - Fix docs of valid ODRs
 * st,sensors
   - dt-binding rework.  Two efforts on this crossed in a previous cycle
     so this update cherry picks the best of the two yaml conversions.
   - Don't copy the channel spec array as now ext_info is no longer modified.
 * st,stm32-adc
   - tidy up some docs that were marked as kernel-doc but aren't.
 * ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
   - Convert remainder of probe() functions to devm_ managed functions
     to simplify error handing and remove paths.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmC/mCoRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoidAQ//SqpbBeEy8HATSHccooHwHI3eK+hnj0n9
 9zr6/7o52EQ0lFN6V7OLp0XNL3DNIV8oYAyvzYZ4Qh2NXLYQHDnqiiUyLxCfctqu
 Ii+9NmVmuk/PlPRRubQRZE+Czdtwgsp7dRQOYJiuxUeKVD/EUVjl1FmpsiPtGeaa
 iU6JaYtdF3ie0b1zQCwQTYYsM8lZ2/ovKW8F29K5ALnrDd9h6Ad0p5QDvyDxyajp
 VyLRJa7nwAfK5rP6efuNsDfzbMycTPtHkcC+Pgec/2RrXL5mDz4EXHI1nOUZAGdb
 UaN/uDpytAxJZk6Fs2f+RdgevlQgpBxAXGDHE2YHkcZi7X0ppWOjeIZFSDbDiaHO
 XlSQgOelUqKtHhRZ3MYHxbSOgO3Vif6ecCDMNCN78E0YE3kQHHSwY0JMGgUeHIGG
 hQPKGaD1AKzh7AsbPbazYW6VX4dDDWcr8pQ8D9wWLUKikcZLKqRH5uAwvjZ+NjuC
 Bfnjx/QhmIhbs0gFaw4Q5mvYQ3Zmfh7nzcW98jwcbR6pOqKvIeqzw9OARRHaimrd
 /GRCiccxKtU8J7f5l+MSzYQt4hT0Ef1vuq9Ak5SDCr3Fwnix5ipFVLkipWvgJ7JD
 OqubcwwW5EfgZPY/X7nsK/U6v8SlqF4XrvCVky4MUt0x1YXxc/tjYak8oLEqpMVC
 gQP3KUZIYeA=
 =Zved
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of new IIO/counter device support, features and cleanup for 5.14

There are a couple of large cleanup sets in here alongside a number of new
drivers.

Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.

Counters
========

New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
  - New driver.

IIO
===

New device support
* amstaos,tsl2591 ambient light sensor.
  - New driver + bindings
  - Follow up fix to ensure some local variables are suitable for error
    handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
  - New driver + bindings
  - Includes an errata work around that cause a build bot failure fixed
    by adding a stub to i2c.
* kionix,kxcjk-1013
  - Add support for KX023-1025 device.  Mostly a different register map
    that needed to be supported.
* murata,sca3300 accelerometer
  - New driver + bindings
* st,lsm9ds0 IMU
  - Rework of st,sensors driver to cleanly support this new glue driver
    that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
  - New driver. Intent here is to use this with existing IIO consumer
    drivers such as resistive-adc-touch.
  - Follow up fix to avoid an issue with unsigned subtraction in error
    check.
* ti,tmp117 digital temperature sensor
  - New driver + bindings

Features
* adi,ad5755
  - Add missing dt-binding doc
* adi,ad7298
  - Add ACPI ID used on Intel Galileo Gen 1 boards.
  - Add missing dt-binding doc
* adi,ad7476
  - Add missing dt-binding doc
* adi,ad7746
  - Add missing dt-binding doc for this driver that will hopefully move out
    of staging shortly. Update staging driver to use the binding instead of
    platform data.
* adi,adis16201 + adis16209
  - Add missing dt-binding doc
* adi,adis16480
  - Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
  - Add missing dt-binding doc
* fsl,mma7455
  - Add missing dt-binding doc
* iio-rescale
  - Support handling of processed channels from provider.  Some ADCs
    require (typically non linear) calibration functions to be applied,
    and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
    used as providers to the iio-rescale driver which needs to handle them
    somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
  - Support the serial interface.  Note this required significant
    refactoring of existing driver.
* st,st-sensors
  - Add mount matrix support for normal dt-binding whilst continuing to
    support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
  - Add missing dt-binding doc
* trivial-devices - add entries for
  - memsic,mx4005, memsic,mx6255 and memsic,mxc6655
  - sensortek,stk8312 and sensortek,stk8ba50

Cleanup / minor fixes
* core
  - Use devm_add_action_or_reset() to replace boilerplate in several
    driver and core IIO devm_* functions.
  - Fix an error path issue introduced by above, that could return an
    error pointer rather than the expected null from dev_iio_device_alloc()
  - Move more IIO internals related fields from struct iio_dev to
    struct iio_dev_opaque.
  - Drop unused final update of in_loc in demux setup.
* Docs
  - Move some docs from driver specific to core dos to avoid replication
    of names which the documentation builder does not allow.
    Note this means adding a few device specific notes to the general docs
    to cover the more unusual uses of the ABI.
  - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
    have the bufferX/* variant.  Not we are not getting rid of these
    interfaces, just encouraging new code to use the new interface.
* IIO wide:
  - Tidy up new cases of dev.parent etc being set in drivers as the core
    now does it.
  - Fix more cases of possible miss-aligned buffers when passed to
    iio_push_to_buffers_with_timestamp().  Note we only have one known
    instance of anyone seeing this bug actually happening, so this has been
    a low priority cleanup effort for several cycles.
  - sysfs_emit() used in more drivers.
  - Runtime pm tidy up and use of pm_runtime_resume_and_get()
  - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
    that the timestamp when inserted by naturally aligned + consumers can
    assume that all fields are naturally aligned. Part of a long running
    effort, with at least 2 more series to come tackling additional
    variants.
  - Stop specifying "mount-matrix" property name in every lookup of the
    mount matrix from firmware by hard coding it in the core.
* adi,ad7476
  - Handle the variety of different regulators used by the parts supported
    by this driver (came up in dt-binding review)
* adi,ad7746
  - Trivial drop of if (ret) return ret; return 0; pattern
  - Tidy up comments
  - Pull capdac setup out to own function.
* adi,ad7766
  - Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
  - Avoid returning error codes in interrupt handlers.
  - Handle a failure in spi_write in the trigger handler.
  - Rework to add updating of device page after changing it.
  - Don't push data to IIO buffers when read failed.
  - Add configuration of burst max speed to core avoid handling this in
    each driver.
  - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
  - Excessive includes cleanup via include-what-you-use static checker
    after zero day highlighted that these needed updating.
* afe
  - Amend binding to add #io-channel-cells, thus allowing this IIO
    consumer to also be an IIO provider.
* aosong,am2315
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* bosch,bma180
  - Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* ep93xx_adc,
  - Drop a redundant error print.
* maxim,max118
  - Convert remainder of probe() to devm_ managed functions.
  - Avoid some repeated jumping back and forth between iio_dev and
    spi structures.
* maxim,max11100
  - Use get_unaligned_be16() instead of open coding.
  - Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
  - Unused error value dropped.
* sensiron,sgp30
  - Drop use of %hx in favor of %x and letting the normal type conversion
    work.
* sensortek,stk8312
  - Add lowercase device id and note uppercase version deprecated.
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* sprx,sc72xx_adc
  - add MODULE_DEVICE_TABLE
* st,lsm6dsx
  - Fix docs of valid ODRs
* st,sensors
  - dt-binding rework.  Two efforts on this crossed in a previous cycle
    so this update cherry picks the best of the two yaml conversions.
  - Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
  - tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
  - Convert remainder of probe() functions to devm_ managed functions
    to simplify error handing and remove paths.

* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
  i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  iio: adis: Cleanout unused headers
  iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
  counter: Add support for Intel Quadrature Encoder Peripheral
  staging: iio: cdc: ad7746: extract capac setup to own function
  staging: iio: cdc: ad7746: clean up probe return
  staging: iio: cdc: ad7746: remove ordinary comments
  iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
  iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
  iio: adc: ti-adc0832: Use devm managed functions for all of probe()
  iio: adc: ti-adc081c: Use devm managed functions for all of probe()
  iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
  iio: adc: max1118: Use devm_ managed functions for all of probe
  iio: adc: max11100: Use devm_ functions for rest of probe()
  iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
  iio: chemical: sgp30: Drop use of %hx in format string.
  iio: gyro: st_gyro: Support mount matrix
  iio: magnetometer: st_magn: Support mount matrix
  iio: accel: st_sensors: Stop copying channels
  iio: accel: st_sensors: Support generic mounting matrix
  ...
2021-06-09 12:11:49 +02:00
Fabio M. De Francesco
54fd727f83 staging: rtl8712: Remove unnecessary alias of printk()
This module defines four alias for printk(). Removed them
all, because they are not used anywhere else in the driver.
Converted the only exception to the explicit use of printk().

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210606034038.9657-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 12:11:21 +02:00
Lars-Peter Clausen
e9de1ecade staging: ralink-gdma: Remove incorrect author information
Lars did not write the ralink-gdma driver. Looks like his name just got
copy&pasted from another similar DMA driver. Remove his name from the
copyright and MODULE_AUTHOR.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210607100119.26983-1-lars@metafoo.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 12:07:52 +02:00
Wenli Looi
43c85d770d staging: rtl8723bs: Fix uninitialized variables
The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

  [ snip ]

[  457.271004] Backtrace:
[  457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 12:06:19 +02:00
Ruslan Bilovol
e89bb42883 usb: gadget: u_audio: add real feedback implementation
This adds interface between userspace and feedback endpoint to report real
feedback frequency to the Host.

Current implementation adds new userspace interface ALSA mixer control
"Capture Pitch 1000000" (similar to aloop driver's "PCM Rate Shift 100000"
mixer control)

Value in PPM is chosen to have correction value agnostic of the actual HW
rate, which the application is not necessarily dealing with, while still
retaining a good enough precision to allow smooth clock correction on the
playback side, if necessary.

Similar to sound/usb/endpoint.c, a slow down is allowed up to 25%. This
has no impact on the required bandwidth. Speedup correction has an impact
on the bandwidth reserved for the isochronous endpoint. The default
allowed speedup is 500ppm. This seems to be more than enough but, if
necessary, this is configurable through a module parameter. The reserved
bandwidth is rounded up to the next packet size.

Usage of this new control is easy to implement in existing userspace tools
like alsaloop from alsa-utils.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210603220104.1216001-4-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:26:49 +02:00
Ruslan Bilovol
40c73b3054 usb: gadget: f_uac2: add adaptive sync support for capture
Current f_uac2 USB OUT (aka 'capture') synchronization
implements 'ASYNC' scenario which means USB Gadget has
it's own freerunning clock and can update Host about
real clock frequency through feedback endpoint so Host
can align number of samples sent to the USB gadget to
prevent overruns/underruns

In case if Gadget can has no it's internal clock and
can consume audio samples at any rate (for example,
on the Gadget side someone records audio directly to
a file, or audio samples are played through an
external DAC as soon as they arrive), UAC2 spec
suggests 'ADAPTIVE' synchronization type.

Change UAC2 driver to make it configurable through
additional 'c_sync' configfs file.

Default remains 'asynchronous' with possibility to
switch it to 'adaptive'

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210603220104.1216001-3-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:26:49 +02:00
Ruslan Bilovol
24f779dac8 usb: gadget: f_uac2/u_audio: add feedback endpoint support
As per USB and UAC2 specs, asynchronous audio sink endpoint
requires explicit synchronization mechanism (Isochronous
Feedback Endpoint)

Implement feedback companion endpoint for ISO OUT endpoint

This patch adds all required infrastructure and USB requests
handling for feedback endpoint. Syncrhonization itself is
still dummy (feedback ep always reports 'nomimal frequency'
 e.g. no adjustement is needed). This satisfies hosts that
require feedback endpoint (like Win10) and poll it periodically

Actual synchronization mechanism should be implemented
separately

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210603220104.1216001-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:26:49 +02:00
Clément Lassieur
aafe93516b usb: dwc2: Don't reset the core after setting turnaround time
Every time the hub signals a reset while we (device) are hsotg->connected,
dwc2_hsotg_core_init_disconnected() is called, which in turn calls
dwc2_hs_phy_init().

GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if
hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the
default one: 0x5, corresponding to 16-bit) is always different from
hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every
time (usbcfg != usbcfg_old), which causes 2 issues:

1) The call to dwc2_core_reset() does another reset 300us after the initial
Chirp K of the first reset (which should last at least Tuch = 1ms), and
messes up the High-speed Detection Handshake: both hub and device drive
current into the D+ and D- lines at the same time.

2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always
the default one (0x5).

Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset()
fixes both issues.  It is now set even when select_phy is false because the
cost of the Core Soft Reset is removed.

Fixes: 1e868545f2 ("usb: dwc2: gadget: Move gadget phy init into core phy init")
Signed-off-by: Clément Lassieur <clement@lassieur.org>
Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:25:07 +02:00
Andrew Gabbasov
ecfbd7b905 usb: gadget: f_fs: Fix setting of device and driver data cross-references
FunctionFS device structure 'struct ffs_dev' and driver data structure
'struct ffs_data' are bound to each other with cross-reference pointers
'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one
is supposed to be valid through the whole life of 'struct ffs_data'
(and while 'struct ffs_dev' exists non-freed), the second one is cleared
in 'ffs_closed()' (called from 'ffs_data_reset()' or the last
'ffs_data_put()'). This can be called several times, alternating in
different order with 'ffs_free_inst()', that, if possible, clears
the other cross-reference.

As a result, different cases of these calls order may leave stale
cross-reference pointers, used when the pointed structure is already
freed. Even if it occasionally doesn't cause kernel crash, this error
is reported by KASAN-enabled kernel configuration.

For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was
fixed by commit cdafb6d8b8 ("usb: gadget: f_fs: Fix use-after-free in
ffs_free_inst").

The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()']
now causes KASAN reported error [1], when 'ffs_data_reset()' clears
'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev',
but can't clear 'ffs_data->private_data', which is then accessed
in 'ffs_closed()' called from 'ffs_data_put()'. This happens since
'ffs_dev->ffs_data' reference is cleared too early.

Moreover, one more use case, when 'ffs_free_inst()' is called immediately
after mounting FunctionFS device (that is before the descriptors are
written and 'ffs_ready()' is called), and then 'ffs_data_reset()'
or 'ffs_data_put()' is called from accessing "ep0" file or unmounting
the device. This causes KASAN error report like [2], since
'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly
clear 'ffs_data->private_data', that is later accessed to freed structure.

Fix these (and may be other) cases of stale pointers access by moving
setting and clearing of the mentioned cross-references to the single
places, setting both of them when 'struct ffs_data' is created and
bound to 'struct ffs_dev', and clearing both of them when one of the
structures is destroyed. It seems convenient to make this pointer
initialization and structures binding in 'ffs_acquire_dev()' and
make pointers clearing in 'ffs_release_dev()'. This required some
changes in these functions parameters and return types.

Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor
issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()'
is called without unmounting the device, and "release_dev" callback
is not called at all, or (2) "release_dev" callback is called before
"ffs_closed" callback on unmounting, which seems to be not correctly
nested with "acquire_dev" and "ffs_ready" callbacks.
Make this cleanup togther with other mentioned 'ffs_release_dev()' changes.

[1]
==================================================================
root@rcar-gen3:~# mkdir /dev/cfs
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   64.340664] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# cd /dev/ffs
root@rcar-gen3:/dev/ffs# /home/root/ffs-test
ffs-test: info: ep0: writing descriptors (in v2 format)
[   83.181442] read descriptors
[   83.186085] read strings
ffs-test: info: ep0: writing strings
ffs-test: dbg:  ep1: starting
ffs-test: dbg:  ep2: starting
ffs-test: info: ep1: starts
ffs-test: info: ep2: starts
ffs-test: info: ep0: starts

^C
root@rcar-gen3:/dev/ffs# cd /home/root/
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   98.935061] unloading
root@rcar-gen3:~# umount /dev/ffs
[  102.734301] ==================================================================
[  102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs]
[  102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997
[  102.756709]
[  102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8
[  102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[  102.772179] Call trace:
[  102.774779]  dump_backtrace+0x0/0x330
[  102.778653]  show_stack+0x20/0x2c
[  102.782152]  dump_stack+0x11c/0x1ac
[  102.785833]  print_address_description.constprop.0+0x30/0x274
[  102.791862]  kasan_report+0x14c/0x1c8
[  102.795719]  __asan_report_store1_noabort+0x34/0x58
[  102.800840]  ffs_release_dev+0x64/0xa8 [usb_f_fs]
[  102.805801]  ffs_fs_kill_sb+0x50/0x84 [usb_f_fs]
[  102.810663]  deactivate_locked_super+0xa0/0xf0
[  102.815339]  deactivate_super+0x98/0xac
[  102.819378]  cleanup_mnt+0xd0/0x1b0
[  102.823057]  __cleanup_mnt+0x1c/0x28
[  102.826823]  task_work_run+0x104/0x180
[  102.830774]  do_notify_resume+0x458/0x14e0
[  102.835083]  work_pending+0xc/0x5f8
[  102.838762]
[  102.840357] Allocated by task 2988:
[  102.844032]  kasan_save_stack+0x28/0x58
[  102.848071]  kasan_set_track+0x28/0x3c
[  102.852016]  ____kasan_kmalloc+0x84/0x9c
[  102.856142]  __kasan_kmalloc+0x10/0x1c
[  102.860088]  __kmalloc+0x214/0x2f8
[  102.863678]  kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[  102.868990]  ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[  102.873942]  try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[  102.880629]  usb_get_function_instance+0x64/0x68 [libcomposite]
[  102.886858]  function_make+0x128/0x1ec [libcomposite]
[  102.892185]  configfs_mkdir+0x330/0x590 [configfs]
[  102.897245]  vfs_mkdir+0x12c/0x1bc
[  102.900835]  do_mkdirat+0x180/0x1d0
[  102.904513]  __arm64_sys_mkdirat+0x80/0x94
[  102.908822]  invoke_syscall+0xf8/0x25c
[  102.912772]  el0_svc_common.constprop.0+0x150/0x1a0
[  102.917891]  do_el0_svc+0xa0/0xd4
[  102.921386]  el0_svc+0x24/0x34
[  102.924613]  el0_sync_handler+0xcc/0x154
[  102.928743]  el0_sync+0x198/0x1c0
[  102.932238]
[  102.933832] Freed by task 2996:
[  102.937144]  kasan_save_stack+0x28/0x58
[  102.941181]  kasan_set_track+0x28/0x3c
[  102.945128]  kasan_set_free_info+0x28/0x4c
[  102.949435]  ____kasan_slab_free+0x104/0x118
[  102.953921]  __kasan_slab_free+0x18/0x24
[  102.958047]  slab_free_freelist_hook+0x148/0x1f0
[  102.962897]  kfree+0x318/0x440
[  102.966123]  ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[  102.971075]  usb_put_function_instance+0x84/0xa4 [libcomposite]
[  102.977302]  ffs_attr_release+0x18/0x24 [usb_f_fs]
[  102.982344]  config_item_put+0x140/0x1a4 [configfs]
[  102.987486]  configfs_rmdir+0x3fc/0x518 [configfs]
[  102.992535]  vfs_rmdir+0x114/0x234
[  102.996122]  do_rmdir+0x274/0x2b0
[  102.999617]  __arm64_sys_unlinkat+0x94/0xc8
[  103.004015]  invoke_syscall+0xf8/0x25c
[  103.007961]  el0_svc_common.constprop.0+0x150/0x1a0
[  103.013080]  do_el0_svc+0xa0/0xd4
[  103.016575]  el0_svc+0x24/0x34
[  103.019801]  el0_sync_handler+0xcc/0x154
[  103.023930]  el0_sync+0x198/0x1c0
[  103.027426]
[  103.029020] The buggy address belongs to the object at ffff0004d46ff500
[  103.029020]  which belongs to the cache kmalloc-128 of size 128
[  103.042079] The buggy address is located 73 bytes inside of
[  103.042079]  128-byte region [ffff0004d46ff500, ffff0004d46ff580)
[  103.054236] The buggy address belongs to the page:
[  103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe
[  103.070437] head:0000000021aa849b order:1 compound_mapcount:0
[  103.076456] flags: 0x8000000000010200(slab|head|zone=2)
[  103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300
[  103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000
[  103.098150] page dumped because: kasan: bad access detected
[  103.103985]
[  103.105578] Memory state around the buggy address:
[  103.110602]  ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.118161]  ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.133284]                                               ^
[  103.139120]  ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  103.146679]  ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.154238] ==================================================================
[  103.161792] Disabling lock debugging due to kernel taint
[  103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e
[  103.175406] Mem abort info:
[  103.178457]   ESR = 0x96000004
[  103.181609]   EC = 0x25: DABT (current EL), IL = 32 bits
[  103.187020]   SET = 0, FnV = 0
[  103.190185]   EA = 0, S1PTW = 0
[  103.193417] Data abort info:
[  103.196385]   ISV = 0, ISS = 0x00000004
[  103.200315]   CM = 0, WnR = 0
[  103.203366] [0037801d6000018e] address between user and kernel address ranges
[  103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4
[  103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G    B             5.13.0-rc4+ #8
[  103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[  103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[  103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[  103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[  103.290385] sp : ffff800014777a80
[  103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000
[  103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4
[  103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0
[  103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000
[  103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[  103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658
[  103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648
[  103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000
[  103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001
[  103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70
[  103.365766] Call trace:
[  103.368235]  ffs_data_clear+0x138/0x370 [usb_f_fs]
[  103.373076]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[  103.377829]  ffs_data_closed+0x1ec/0x244 [usb_f_fs]
[  103.382755]  ffs_fs_kill_sb+0x70/0x84 [usb_f_fs]
[  103.387420]  deactivate_locked_super+0xa0/0xf0
[  103.391905]  deactivate_super+0x98/0xac
[  103.395776]  cleanup_mnt+0xd0/0x1b0
[  103.399299]  __cleanup_mnt+0x1c/0x28
[  103.402906]  task_work_run+0x104/0x180
[  103.406691]  do_notify_resume+0x458/0x14e0
[  103.410823]  work_pending+0xc/0x5f8
[  103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[  103.420490] ---[ end trace 57b43a50e8244f57 ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================

[2]
==================================================================
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~#
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   54.766480] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   63.197597] unloading
root@rcar-gen3:~# cat /dev/ffs/ep0
cat: read error:[   67.213506] ==================================================================
[   67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs]
[   67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994
[   67.236446]
[   67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8
[   67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[   67.251624] Call trace:
[   67.254212]  dump_backtrace+0x0/0x330
[   67.258081]  show_stack+0x20/0x2c
[   67.261579]  dump_stack+0x11c/0x1ac
[   67.265260]  print_address_description.constprop.0+0x30/0x274
[   67.271286]  kasan_report+0x14c/0x1c8
[   67.275143]  __asan_report_store1_noabort+0x34/0x58
[   67.280265]  ffs_data_clear+0x70/0x370 [usb_f_fs]
[   67.285220]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[   67.290172]  ffs_data_closed+0x240/0x244 [usb_f_fs]
[   67.295305]  ffs_ep0_release+0x40/0x54 [usb_f_fs]
[   67.300256]  __fput+0x304/0x580
[   67.303576]  ____fput+0x18/0x24
[   67.306893]  task_work_run+0x104/0x180
[   67.310846]  do_notify_resume+0x458/0x14e0
[   67.315154]  work_pending+0xc/0x5f8
[   67.318834]
[   67.320429] Allocated by task 2988:
[   67.324105]  kasan_save_stack+0x28/0x58
[   67.328144]  kasan_set_track+0x28/0x3c
[   67.332090]  ____kasan_kmalloc+0x84/0x9c
[   67.336217]  __kasan_kmalloc+0x10/0x1c
[   67.340163]  __kmalloc+0x214/0x2f8
[   67.343754]  kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[   67.349066]  ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[   67.354017]  try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[   67.360705]  usb_get_function_instance+0x64/0x68 [libcomposite]
[   67.366934]  function_make+0x128/0x1ec [libcomposite]
[   67.372260]  configfs_mkdir+0x330/0x590 [configfs]
[   67.377320]  vfs_mkdir+0x12c/0x1bc
[   67.380911]  do_mkdirat+0x180/0x1d0
[   67.384589]  __arm64_sys_mkdirat+0x80/0x94
[   67.388899]  invoke_syscall+0xf8/0x25c
[   67.392850]  el0_svc_common.constprop.0+0x150/0x1a0
[   67.397969]  do_el0_svc+0xa0/0xd4
[   67.401464]  el0_svc+0x24/0x34
[   67.404691]  el0_sync_handler+0xcc/0x154
[   67.408819]  el0_sync+0x198/0x1c0
[   67.412315]
[   67.413909] Freed by task 2993:
[   67.417220]  kasan_save_stack+0x28/0x58
[   67.421257]  kasan_set_track+0x28/0x3c
[   67.425204]  kasan_set_free_info+0x28/0x4c
[   67.429513]  ____kasan_slab_free+0x104/0x118
[   67.434001]  __kasan_slab_free+0x18/0x24
[   67.438128]  slab_free_freelist_hook+0x148/0x1f0
[   67.442978]  kfree+0x318/0x440
[   67.446205]  ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[   67.451156]  usb_put_function_instance+0x84/0xa4 [libcomposite]
[   67.457385]  ffs_attr_release+0x18/0x24 [usb_f_fs]
[   67.462428]  config_item_put+0x140/0x1a4 [configfs]
[   67.467570]  configfs_rmdir+0x3fc/0x518 [configfs]
[   67.472626]  vfs_rmdir+0x114/0x234
[   67.476215]  do_rmdir+0x274/0x2b0
[   67.479710]  __arm64_sys_unlinkat+0x94/0xc8
[   67.484108]  invoke_syscall+0xf8/0x25c
[   67.488055]  el0_svc_common.constprop.0+0x150/0x1a0
[   67.493175]  do_el0_svc+0xa0/0xd4
[   67.496671]  el0_svc+0x24/0x34
[   67.499896]  el0_sync_handler+0xcc/0x154
[   67.504024]  el0_sync+0x198/0x1c0
[   67.507520]
[   67.509114] The buggy address belongs to the object at ffff0004c26e9700
[   67.509114]  which belongs to the cache kmalloc-128 of size 128
[   67.522171] The buggy address is located 74 bytes inside of
[   67.522171]  128-byte region [ffff0004c26e9700, ffff0004c26e9780)
[   67.534328] The buggy address belongs to the page:
[   67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8
[   67.549175] head:000000003177a217 order:1 compound_mapcount:0
[   67.555195] flags: 0x8000000000010200(slab|head|zone=2)
[   67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300
[   67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[   67.576890] page dumped because: kasan: bad access detected
[   67.582725]
[   67.584318] Memory state around the buggy address:
[   67.589343]  ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   67.596903]  ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   67.612022]                                               ^
[   67.617860]  ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   67.625421]  ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   67.632981] ==================================================================
[   67.640535] Disabling lock debugging due to kernel taint
 File descriptor[   67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d
 in bad state
[   67.655456] Mem abort info:
[   67.659619]   ESR = 0x96000004
[   67.662801]   EC = 0x25: DABT (current EL), IL = 32 bits
[   67.668225]   SET = 0, FnV = 0
[   67.671375]   EA = 0, S1PTW = 0
[   67.674613] Data abort info:
[   67.677587]   ISV = 0, ISS = 0x00000004
[   67.681522]   CM = 0, WnR = 0
[   67.684588] [fabb801d4000018d] address between user and kernel address ranges
[   67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4
[   67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G    B             5.13.0-rc4+ #8
[   67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[   67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[   67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[   67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[   67.771365] sp : ffff800014767ad0
[   67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0
[   67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d
[   67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0
[   67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000
[   67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa
[   67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014
[   67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000
[   67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001
[   67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d
[   67.846748] Call trace:
[   67.849218]  ffs_data_clear+0x138/0x370 [usb_f_fs]
[   67.854058]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[   67.858810]  ffs_data_closed+0x240/0x244 [usb_f_fs]
[   67.863736]  ffs_ep0_release+0x40/0x54 [usb_f_fs]
[   67.868488]  __fput+0x304/0x580
[   67.871665]  ____fput+0x18/0x24
[   67.874837]  task_work_run+0x104/0x180
[   67.878622]  do_notify_resume+0x458/0x14e0
[   67.882754]  work_pending+0xc/0x5f8
[   67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[   67.892422] ---[ end trace 6d7cedf53d7abbea ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================

Fixes: 4b187fceec ("usb: gadget: FunctionFS: add devices management code")
Fixes: 3262ad8243 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference")
Fixes: cdafb6d8b8 ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst")
Reported-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:24:09 +02:00
Sven Peter
45d39448b4 usb: dwc3: support 64 bit DMA in platform driver
Currently, the dwc3 platform driver does not explicitly ask for
a DMA mask. This makes it fall back to the default 32-bit mask which
breaks the driver on systems that only have RAM starting above the
first 4G like the Apple M1 SoC.

Fix this by calling dma_set_mask_and_coherent with a 64bit mask.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210607061751.89752-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:23:33 +02:00
Rikard Falkeborn
0c68387672 pinctrl: bcm: Constify static pinmux_ops
These are only assigned, either directly or via the bcm63xx_pinctrl_soc
struct, to the pmxops field in the pinctrl_desc struct and never
modified, so make them const to allow the compiler to put them in
read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210605185908.39982-3-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09 11:18:33 +02:00
Rikard Falkeborn
d977909367 pinctrl: bcm: Constify static pinctrl_ops
These are only assigned, either directly or via the bcm63xx_pinctrl_soc
struct, to the pctlops field in the pinctrl_desc struct and never
modified, so make them const to allow the compiler to put them in
read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210605185908.39982-2-rikard.falkeborn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09 11:18:33 +02:00
Alan Stern
60dfe484ce USB: core: Avoid WARNings for 0-length descriptor requests
The USB core has utility routines to retrieve various types of
descriptors.  These routines will now provoke a WARN if they are asked
to retrieve 0 bytes (USB "receive" requests must not have zero
length), so avert this by checking the size argument at the start.

CC: Johan Hovold <johan@kernel.org>
Reported-and-tested-by: syzbot+7dbcd9ff34dc4ed45240@syzkaller.appspotmail.com
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210607152307.GD1768031@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:11:39 +02:00
Baokun Li
307462a6f5 usb: gadget: function: printer: use list_move instead of list_del/list_add
Using list_move() instead of list_del() + list_add().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20210609070612.1325044-1-libaokun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:11:30 +02:00
Peter Chen
2a04276781 usb: dwc3: core: fix kernel panic when do reboot
When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.

[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119]  inode_permission+0x2c/0x198
[ 2925.127042]  lookup_one_len_common+0xb0/0xf8
[ 2925.131315]  lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764]  lookup_positive_unlocked+0x14/0x50
[ 2925.140296]  debugfs_lookup+0x68/0xa0
[ 2925.143964]  dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675]  dwc3_gadget_exit+0x28/0x78
[ 2925.152518]  dwc3_drd_exit+0x100/0x1f8
[ 2925.156267]  dwc3_remove+0x11c/0x120
[ 2925.159851]  dwc3_shutdown+0x14/0x20
[ 2925.163432]  platform_shutdown+0x28/0x38
[ 2925.167360]  device_shutdown+0x15c/0x378
[ 2925.171291]  kernel_restart_prepare+0x3c/0x48
[ 2925.175650]  kernel_restart+0x1c/0x68
[ 2925.179316]  __do_sys_reboot+0x218/0x240
[ 2925.183247]  __arm64_sys_reboot+0x28/0x30
[ 2925.187262]  invoke_syscall+0x48/0x100
[ 2925.191017]  el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726]  do_el0_svc+0x28/0x88
[ 2925.199045]  el0_svc+0x20/0x30
[ 2925.202104]  el0_sync_handler+0xa8/0xb0
[ 2925.205942]  el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 5ff90af9da ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham <jackp@codeaurora.org>
Tested-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:06:20 +02:00
Yang Yingliang
fbf649cd6d usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: 517c4c44b3 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210605080914.2057758-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:04:27 +02:00
Marian-Cristian Rotariu
d00889080a usb: dwc3: ep0: fix NULL pointer exception
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong
index back to the caller.

In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 11:03:32 +02:00
Linyu Yuan
305f670846 usb: gadget: eem: fix wrong eem header operation
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.

Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:57:52 +02:00
Andy Shevchenko
184fa76b87 usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
For ACPI devices we have a symmetric API to put them, so use it in the driver.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607205007.71458-3-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:56:14 +02:00
Andy Shevchenko
843fabdd76 usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
devm_ioremap_resource() can return an error, add missed check for it.

Fixes: 43d596e322 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:56:11 +02:00
Andy Shevchenko
1a85b350a7 usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: 6701adfa96 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:56:08 +02:00
Marek Vasut
241a9e233e
drm/bridge: ti-sn65dsi83: Fix sparse warnings
Fix the following sparse warnings generated by "make C=1":

drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13:    expected unsigned short [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13:    got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13:    expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13:    got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13:    expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13:    got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13:    expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13:    got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13:    expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13:    got restricted __le16 [usertype]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608142211.82333-1-marex@denx.de
2021-06-09 10:52:37 +02:00
Kyle Tso
5ab14ab1f2 usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
If the VDM responses couldn't be sent successfully, it doesn't need to
finish the AMS until the retry count reaches the limit.

Fixes: 0908c5aca3 ("usb: typec: tcpm: AMS and Collision Avoidance")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210606081452.764032-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:52:15 +02:00
Steve French
be8bcf8baa
Merge pull request #55 from namjaejeon/cifsd-for-next
cifsd-fixes
2021-06-09 03:48:30 -05:00
Maciej Żenczykowski
032e288097 usb: fix various gadget panics on 10gbps cabling
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
  full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
  high-speed (USB2.0 - 480Mbps),
  super-speed (USB3.0 - 5Gbps),
  super-speed-plus (USB3.1 - 10Gbps).

The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).

However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)

The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.

Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:40:08 +02:00
Thomas Gleixner
12f7764ac6 x86/process: Check PF_KTHREAD and not current->mm for kernel threads
switch_fpu_finish() checks current->mm as indicator for kernel threads.
That's wrong because kernel threads can temporarily use a mm of a user
process via kthread_use_mm().

Check the task flags for PF_KTHREAD instead.

Fixes: 0cecca9d03 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.912645927@linutronix.de
2021-06-09 10:39:04 +02:00
Maciej Żenczykowski
90c4d05780 usb: fix various gadgets null ptr deref on 10gbps cabling.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.

Fixes: eaef50c760 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:37:13 +02:00
Mario Limonciello
d1658268e4 usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
The XHCI controller is required to enter D3hot rather than D3cold for AMD
s2idle on this hardware generation.

Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by
host in resume and eventually this results in xhci resume failures during
the s2idle wakeup.

Link: https://lore.kernel.org/linux-usb/1612527609-7053-1-git-send-email-Prike.Liang@amd.com/
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable <stable@vger.kernel.org> # 5.11+
Link: https://lore.kernel.org/r/20210527154534.8900-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:36:00 +02:00
Maciej Żenczykowski
1958ff5ad2 usb: f_ncm: only first packet of aggregate needs to start timer
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.

This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)

As such the first packet is now at most delayed by 300us.

Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.

This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:34:18 +02:00
Maciej Żenczykowski
3370139745 USB: f_ncm: ncm_bitrate (speed) is unsigned
[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:26:43 +02:00
Michael Kao
507b1b2812 arm64: dts: mt8183-kukui: Add tboard thermal zones
Add tboard thermal zones.
The tboard thermal sensors are a kind of NTC sensors which are located
on PCB board to correlate the temperature of the case (Tskin).

pull-up voltage: 1800 mv
pull-up resistor: 75K

Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
AuxIn = Vsense * 4096 / 1500

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>

Link: https://lore.kernel.org/r/20210604093755.13288-1-ben.tseng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-06-09 10:13:30 +02:00
Rui Miguel Silva
40d9e03f41 MAINTAINERS: usb: add entry for isp1760
Giving support for isp1763 made a little revival to this driver, add
entry in the MAINTAINERS file with me as maintainer.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210607170054.220975-1-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:08:50 +02:00
Greg Kroah-Hartman
a39b7ba35d Two bug fixes for cdns3 and cdnsp
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAmC9dVwACgkQSFkpgVDW
 cbs+oAf/b4mVmJpYIMTBM5tU086YpsZ80StjH3MVx2Hx/F8bM2ewovOUxOWPAY2o
 A6ROuLUlU/0TT8U3LL5PEbQDHhuPsf1n3erv6iz63a72uzOouLeHOBYFP+E6aM5z
 1mkr2yHXpwFe+aHpstXvOgeR4ano0kzMkx/I3SPH6P8/pXiBSrpvTiBwnxqvZxbb
 VQuP9VfEF5e8vXuDiMF1V5qjea/BYnvjt2Yj34An3JHte13oTNRdFM/6aQiIEvt2
 r6g0nBJizmhIHwtNYq30KfgFsNjiC9+dPtOCOVyv80c+Qu+F71EwEyqZSrOVLunh
 hfxC/U6H8vy73Zo3gJP3xrXE+xvztw==
 =OpDk
 -----END PGP SIGNATURE-----

Merge tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus

Peter writes:

Two bug fixes for cdns3 and cdnsp

* tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
  usb: cdns3: Enable TDL_CHK only for OUT ep
2021-06-09 10:05:01 +02:00
Greg Kroah-Hartman
1ca01c0805 USB-serial fixes for 5.13-rc5
Here's a fix for some pipe-direction mismatches in the quatech2 driver,
 and a couple of new device ids for ftdi_sio and omninet (and a related
 trivial cleanup).
 
 All but the ftdi_sio commit have been in linux-next, and with no
 reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYLtSqwAKCRALxc3C7H1l
 CPj2AQDSM/GeQ658vxYKPIA+8ZDBWubaYhq8KAUDqxL7hBMevAEAkbFhjgtyQt4h
 32lqF2YsahxCHckvLXSnxxj1cTJxGAk=
 =NKr6
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Jonah writes:

USB-serial fixes for 5.13-rc5

Here's a fix for some pipe-direction mismatches in the quatech2 driver,
and a couple of new device ids for ftdi_sio and omninet (and a related
trivial cleanup).

All but the ftdi_sio commit have been in linux-next, and with no
reported issues.

* tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: ftdi_sio: add NovaTech OrionMX product ID
  USB: serial: omninet: update driver description
  USB: serial: omninet: add device id for Zyxel Omni 56K Plus
  USB: serial: quatech2: fix control-request directions
2021-06-09 10:04:17 +02:00
Vandita Kulkarni
51317434e1 drm/i915/dsc: Fix bigjoiner check in dsc_disable
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.

v2: Fix formatting
v3: Fix the typo (Mansi)

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
2021-06-09 13:20:07 +05:30
Andy Lutomirski
d8778e393a x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
Both Intel and AMD consider it to be architecturally valid for XRSTOR to
fail with #PF but nonetheless change the register state.  The actual
conditions under which this might occur are unclear [1], but it seems
plausible that this might be triggered if one sibling thread unmaps a page
and invalidates the shared TLB while another sibling thread is executing
XRSTOR on the page in question.

__fpu__restore_sig() can execute XRSTOR while the hardware registers
are preserved on behalf of a different victim task (using the
fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but
modify the registers.

If this happens, then there is a window in which __fpu__restore_sig()
could schedule out and the victim task could schedule back in without
reloading its own FPU registers. This would result in part of the FPU
state that __fpu__restore_sig() was attempting to load leaking into the
victim task's user-visible state.

Invalidate preserved FPU registers on XRSTOR failure to prevent this
situation from corrupting any state.

[1] Frequent readers of the errata lists might imagine "complex
    microarchitectural conditions".

Fixes: 1d731e731c ("x86/fpu: Add a fastpath to __fpu__restore_sig()")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.758116583@linutronix.de
2021-06-09 09:49:38 +02:00
Ikjoon Jang
4fa8492d1e arm64: dts: mt8183: add cbas node under cros_ec
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.

Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Link: https://lore.kernel.org/r/20210609032554.2443675-1-ikjn@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-06-09 09:49:20 +02:00
Benjamin Gaignard
c55356c534 iommu: rockchip: Add support for iommu v2
This second version of the hardware block has a different bits
mapping for page table entries.
Add the ops matching to this new mapping.
Define a new compatible to distinguish it from the first version.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-5-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:48:36 +02:00
Benjamin Gaignard
227014b33f iommu: rockchip: Add internal ops to handle variants
Add internal ops to be able to handle incoming variant v2.
The goal is to keep the overall structure of the framework but
to allow to add the evolution of this hardware block.

The ops are global for a SoC because iommu domains are not
attached to a specific devices if they are for a virtuel device like
drm. Use a global variable shouldn't be since SoC usually doesn't
embedded different versions of the iommu hardware block.
If that happen one day a WARN_ON will be displayed at probe time.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-4-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:48:36 +02:00
Benjamin Gaignard
9e6f3cd589 dt-bindings: iommu: rockchip: Add compatible for v2
Add compatible for the second version of IOMMU hardware block.
RK356x IOMMU can also be link to a power domain.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-3-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:46:53 +02:00
Benjamin Gaignard
7e0fc5072e dt-bindings: iommu: rockchip: Convert IOMMU to DT schema
Convert Rockchip IOMMU to DT schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-2-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:46:53 +02:00
Zhen Lei
e86b041ffe iommu: Delete a duplicate check in iommu_change_dev_def_domain()
Function iommu_group_store_type() is the only caller of the static
function iommu_change_dev_def_domain() and has performed
"if (WARN_ON(!group))" detection before calling it. So the one here is
redundant.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210513075815.6382-1-thunder.leizhen@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:43:17 +02:00
Florian Westphal
152bca0902 xfrm: remove description from xfrm_type struct
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-06-09 09:38:52 +02:00
Thomas Gleixner
484cea4f36 x86/fpu: Prevent state corruption in __fpu__restore_sig()
The non-compacted slowpath uses __copy_from_user() and copies the entire
user buffer into the kernel buffer, verbatim.  This means that the kernel
buffer may now contain entirely invalid state on which XRSTOR will #GP.
validate_user_xstate_header() can detect some of that corruption, but that
leaves the onus on callers to clear the buffer.

Prior to XSAVES support, it was possible just to reinitialize the buffer,
completely, but with supervisor states that is not longer possible as the
buffer clearing code split got it backwards. Fixing that is possible but
not corrupting the state in the first place is more robust.

Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate()
which validates the XSAVE header contents before copying the actual states
to the kernel. copy_user_to_xstate() was previously only called for
compacted-format kernel buffers, but it works for both compacted and
non-compacted forms.

Using it for the non-compacted form is slower because of multiple
__copy_from_user() operations, but that cost is less important than robust
code in an already slow path.

[ Changelog polished by Dave Hansen ]

Fixes: b860eb8dce ("x86/fpu/xstate: Define new functions for clearing fpregs and xstates")
Reported-by: syzbot+2067e764dbcd10721e2e@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.611833074@linutronix.de
2021-06-09 09:28:21 +02:00
Nirmoy Das
5b7a2c92b6 drm/vmwgfx: use ttm_bo_move_null() when there is nothing to move
Use ttm_bo_move_null() instead of ttm_bo_assign_mem().

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608181306.90008-1-nirmoy.das@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-09 09:10:22 +02:00