Commit graph

1,044,825 commits

Author SHA1 Message Date
Peng Li
d364c0a93a net: hd64570: add blank line after declarations
This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:25:21 -07:00
Peng Li
725637a802 net: hd64570: remove redundant blank lines
This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:25:21 -07:00
David S. Miller
06d6211361 Merge branch 'sja1105-yaml'
Vladimir Oltean says:

====================
Convert NXP SJA1105 DSA driver to YAML

This is an attempt to convert the SJA1105 driver to the YAML schema.

The SJA1105 driver has some custom device tree properties which caused
validation problems in the previous attempt:
https://patchwork.kernel.org/project/netdevbpf/patch/20210531234735.1582031-1-olteanv@gmail.com/

So now we are removing them, hoping that this will make the conversion
easier to accept.

In order to do that, we introduce a new PHY interface type, "reverse RMII",
which is like "reverse MII" (aka MII as a PHY) but for the reduced data
width version of the protocol. This is a direct replacement for an rmii
fixed-link. Now, rmii fixed-link interfaces behave as a MAC, and rev-rmii
fixed-link interfaces behave as a PHY.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:20:18 -07:00
Vladimir Oltean
62568bdbe6 dt-bindings: net: dsa: sja1105: convert to YAML schema
Since the sja1105 driver no longer has any custom device tree
properties, the conversion is trivial.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:20:18 -07:00
Vladimir Oltean
5d645df99a net: dsa: sja1105: determine PHY/MAC role from PHY interface type
Now that both RevMII as well as RevRMII exist, we can deprecate the
sja1105,role-mac and sja1105,role-phy properties and simply let the user
select that a port operates in MII PHY role by using
	phy-mode = "rev-mii";
or in RMII PHY role by using
	phy-mode = "rev-rmii";

There are no fixed-link MII or RMII properties in mainline device trees,
and the setup itself is fairly uncommon, so there shouldn't be risks of
breaking compatibility.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:20:18 -07:00
Vladimir Oltean
29afb83ac9 net: dsa: sja1105: apply RGMII delays based on the fixed-link property
The sja1105 driver has an intermediate way of determining whether the
RGMII delays should be applied by the PHY or by itself: by looking at
the port role (PHY or MAC). The port can be put in the PHY role either
explicitly (sja1105,role-phy) or implicitly (fixed-link).

We want to deprecate the sja1105,role-phy property, so all that remains
is the fixed-link property. Introduce a "fixed_link" array of booleans
in the driver, and use that to determine whether RGMII delays must be
applied or not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:20:18 -07:00
Vladimir Oltean
c858d436be net: phy: introduce PHY_INTERFACE_MODE_REVRMII
The "reverse RMII" protocol name is a personal invention, derived from
"reverse MII".

Just like MII, RMII is an asymmetric protocol in that a PHY behaves
differently than a MAC. In the case of RMII, for example:
- the 50 MHz clock signals are either driven by the MAC or by an
  external oscillator (but never by the PHY).
- the PHY can transmit extra in-band control symbols via RXD[1:0] which
  the MAC is supposed to understand, but a PHY isn't.

The "reverse MII" protocol is not standardized either, except for this
web document:
https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/#

In short, it means that the Ethernet controller speaks the 4-bit data
parallel protocol from the perspective of a PHY (it acts like a PHY).
This might mean that it implements clause 22 compatible registers,
although that is optional - the important bit is that its pins can be
connected to an MII MAC and it will 'just work'.

In this discussion thread:
https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/

we agreed that it would be an abuse of terms to use the "RevMII" name
for anything than the 4-bit parallel MII protocol. But since all the
same concepts can be applied to the 2-bit Reduced MII protocol as well,
here we are introducing a "Reverse RMII" protocol. This means: "behave
like an RMII PHY".

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 12:20:18 -07:00
Gustavo A. R. Silva
13dfead49d media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():

1006                 trigger_msg->msg_data[4] = 4; /* Task ID */

Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():

 992                 struct sms_msg_data *trigger_msg =
 993                         (struct sms_msg_data *) msg;
 994
 995                 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
 996                 SMS_INIT_MSG(&msg->x_msg_header,
 997                                 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
 998                                 sizeof(struct sms_msg_hdr) +
 999                                 sizeof(u32) * 5);
1000
1001                 trigger_msg->msg_data[0] = firmware->start_address;
1002                                         /* Entry point */
1003                 trigger_msg->msg_data[1] = 6; /* Priority */
1004                 trigger_msg->msg_data[2] = 0x200; /* Stack size */
1005                 trigger_msg->msg_data[3] = 0; /* Parameter */
1006                 trigger_msg->msg_data[4] = 4; /* Task ID */

even when enough dynamic memory is allocated for _msg_:

 929         /* PAGE_SIZE buffer shall be enough and dma aligned */
 930         msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);

but as _msg_ is casted to (struct sms_msg_data *):

 992                 struct sms_msg_data *trigger_msg =
 993                         (struct sms_msg_data *) msg;

the out-of-bounds warnings are actually valid and should be addressed.

Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.

This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:

  CC [M]  drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 1003 |   trigger_msg->msg_data[1] = 6; /* Priority */
      |   ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
  619 |  u32 msg_data[1];
      |      ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 1004 |   trigger_msg->msg_data[2] = 0x200; /* Stack size */
      |   ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
  619 |  u32 msg_data[1];
      |      ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 1005 |   trigger_msg->msg_data[3] = 0; /* Parameter */
      |   ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
  619 |  u32 msg_data[1];
      |      ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 1006 |   trigger_msg->msg_data[4] = 4; /* Task ID */
      |   ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
  619 |  u32 msg_data[1];
      |      ^~~~~~~~

Fixes: 018b0c6f8a ("[media] siano: make load firmware logic to work with newer firmwares")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-07 14:11:47 -05:00
Colin Ian King
70a2e76fc6 drm/amd/display: Fix two spelling mistakes, clean wide lines
There are two spelling mistakes in dml_print messages, fix these and
clear up checkpatch warning on overly wide line length.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:58:20 -04:00
Christophe JAILLET
d5c9096541 drm/amdgpu: Fix a a typo in a comment
s/than/then/

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:58:16 -04:00
Jiapeng Chong
75a26f84d1 drm/amd/display: Fix duplicate included dce110_hw_sequencer.h
Clean up the following includecheck warning:

./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:
dce110_hw_sequencer.h is included more than once.

No functional change.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:58:12 -04:00
Bernard Zhao
d1ba49e776 drm/amd/display: remove no need variable
remove no need variable, just return the DC_OK

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:58:09 -04:00
Eric Huang
7a68d188d1 drm/amdgpu: Fix warning of Function parameter or member not described
Add the parameter table_freed description on function description.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:58:01 -04:00
Wan Jiabing
272d57c3aa drm/amdkfd: remove duplicate include of kfd_svm.h
kfd_svm.h is included duplicately in commit 42de677f79
("drm/amdkfd: register svm range").

After checking possible related header files,
remove the former one to make the code format more reasonable.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:52 -04:00
Christian König
0ac8f58760 drm/amdgpu: fix VM handling for GART allocations
For GTT allocations with a GART address the res contains the VMID0
addresses and can't be used for VM handling.

So ignore the res when the pages array is given or we fill the page
tables with nonsense.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:44 -04:00
Peng Ju Zhou
9a3bf287c4 drm/amdgpu: Fixing "Indirect register access for Navi12 sriov" for vega10
The NV12 and VEGA10 share the same interface W/RREG32_SOC15*,
the callback functions in these macros may not be defined,
so NULL pointer must be checked but not in
macro __WREG32_SOC15_RLC__, fixing the lock of NULL pointer check.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:38 -04:00
John Clements
312d9253ec drm/amdgpu: Update psp fw attestation support list
Disable support on APU

Reviewed-by: Changfeng <Changfeng.Zhu@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:32 -04:00
Hawking Zhang
4a1d4b6d38 drm/amdkfd: add sdma poison consumption handling
Follow the same apporach as GFX to handle SDMA
poison consumption. Send SIGBUS to application
when receives SDMA_ECC interrupt and issue gpu
reset either mode 2 or mode 1 to get the engine
back

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:24 -04:00
Philip Yang
0dc2bafb08 drm/amdkfd: pages_addr offset must be 0 for system range
prange->offset is for VRAM range mm_nodes, if multiple ranges share same
mm_nodes, migrate range back to VRAM will reuse the VRAM at offset of
the same mm_nodes. For system memory pages_addr array, the offset is
always 0, otherwise, update GPU mapping will use incorrect system memory
page, and cause system memory corruption.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:57:18 -04:00
Rohit Khaire
cf2a22e408 drm/amdgpu: Modify register access in sdma_v5_2 to use _SOC15 macros
In SRIOV environment, KMD should access SDMA registers
through RLCG if GC indirect access flag enabled.

Using _SOC15 read/write macros ensures that they go
through RLC when the flag is enabled.

Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07 14:56:53 -04:00
Mark Brown
d08c5b76b2
Merge series "ASoC: adds new .auto_selectable_formats support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark

These are v3 of "ASoC: adds new .get_fmt support",
but renamed Subject.

This is a little bit challenging patch-set.
The idea/code is almost same as v1 / v2.
v3 has "priority" support.

We need to set dai_link->dai_fmt to select CPU/Codec settings,
and it is selected by Sound Card Driver, today.

Because of it, Sound Card user need to know both CPU / Codec
available dai_fmt, and needs to select it.
For example simple-card / audio-graph case, it is selected by
"format" and "bitclock/frame-master/inversion" on DT.

But, it can be automatically selected if both CPU and Codec drivers
indicate it to ALSA SoC Framework, somehow.

By this patch, dai_fmt can be automatically selected from each
driver if both CPU / Codec driver had .auto_selectable_formats.
Automatically selectable *field* is depends on each drivers.

For example, some driver want to select format "automatically",
but want to select other fields "manually", because of complex limitation.
Or other example, in case of both CPU and Codec are possible to be
clock provider, but the quality was different.
In these case, user need/want to *manually* select each fields
from Sound Card driver.

It uses Sound Card specified fields preferentially, and try to select
non-specific fields from CPU and Codec driver settings if driver had
.auto_selectable_formats.
In other words, we can select all dai_fmt via Sound Card driver
same as before.

Select dai_fmt 100% automatically is very difficult and will be very complex,
but select automatically some fields only is very easy, I guess.
This patch-set is based on such assumption.

v1 -> v2
	- Add more detail explanation on git-log, code, comment.
	- Possible to be Clock/Frame provider is depends on driver's situation.

v2 -> v3
	- has priority
	- tidyup function explanation for snd_soc_dai_get_fmt()
	- Each driver don't try to have SND_SOC_DAIFMT_CBx_CFx to avoid confusion

Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.com

Kuninori Morimoto (7):
  ASoC: soc-core: move snd_soc_runtime_set_dai_fmt() to upside
  ASoC: soc-core: add snd_soc_runtime_get_dai_fmt()
  ASoC: ak4613: add .auto_selectable_formats support
  ASoC: pcm3168a: add .auto_selectable_formats support
  ASoC: rsnd: add .auto_selectable_formats support
  ASoC: fsi: add .auto_selectable_formats support
  ASoC: hdmi-codec: add .auto_selectable_formats support

 include/sound/soc-dai.h       |  55 +++++++
 sound/soc/codecs/ak4613.c     |  11 ++
 sound/soc/codecs/hdmi-codec.c |  21 +++
 sound/soc/codecs/pcm3168a.c   |  26 +++
 sound/soc/sh/fsi.c            |  15 ++
 sound/soc/sh/rcar/core.c      |  31 +++-
 sound/soc/soc-core.c          | 288 ++++++++++++++++++++++++++--------
 sound/soc/soc-dai.c           |  63 ++++++++
 sound/soc/soc-utils.c         |  29 ++++
 9 files changed, 475 insertions(+), 64 deletions(-)

--
2.25.1
2021-06-07 19:53:01 +01:00
Christian König
72db41c933 drm/ttm: fix warning after moving resource to ghost obj
After we moved the resource to the ghost the bo->resource pointer needs
to be reset since the owner of the resource is now the ghost.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607175737.1405-1-christian.koenig@amd.com
2021-06-07 20:04:16 +02:00
José Roberto de Souza
3f409e4cd5 drm/i915/display: Drop FIXME about turn off infoframes
intel_dp_set_infoframes() call in intel_ddi_post_disable_dp() will
take care to disable all enabled infoframes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-4-jose.souza@intel.com
2021-06-07 11:01:37 -07:00
José Roberto de Souza
6d7a793aab drm/i915/display: Allow fastsets when DP_SDP_VSC infoframe do not match with PSR enabled
When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.

So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
2021-06-07 11:01:29 -07:00
José Roberto de Souza
9b2e49a148 drm/i915/display: Fix fastsets involving PSR
Commit 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.

So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.

There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com
2021-06-07 10:59:45 -07:00
Christian König
b8be9e19f4 drm/ttm: fix access to uninitialized variable.
The resource is not allocated yet, so no chance that this will work.

Use the placement instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607171152.15914-1-christian.koenig@amd.com
2021-06-07 19:54:46 +02:00
Gao Xiang
c5fcb51111 erofs: clean up file headers & footers
- Remove my outdated misleading email address;

 - Get rid of all unnecessary trailing newline by accident.

Link: https://lore.kernel.org/r/20210602160634.10757-1-xiang@kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2021-06-08 00:41:24 +08:00
Yue Hu
7dea3de7d3 erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
No any behavior to variable occupied in z_erofs_attach_page() which
is only caller to z_erofs_pagevec_enqueue().

Link: https://lore.kernel.org/r/20210419102623.2015-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Gao Xiang <xiang@kernel.org>
2021-06-08 00:40:18 +08:00
Wei Yongjun
0508c1ad0f erofs: fix error return code in erofs_read_superblock()
'ret' will be overwritten to 0 if erofs_sb_has_sb_chksum() return true,
thus 0 will return in some error handling cases. Fix to return negative
error code -EINVAL instead of 0.

Link: https://lore.kernel.org/r/20210519141657.3062715-1-weiyongjun1@huawei.com
Fixes: b858a4844c ("erofs: support superblock checksum")
Cc: stable <stable@vger.kernel.org> # 5.5+
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
2021-06-08 00:40:18 +08:00
Paul M Stillwell Jr
7e94090ae1 ice: fix clang warning regarding deadcode.DeadStores
clang generates deadcode.DeadStores warnings when a variable
is used to read a value, but then that value isn't used later
in the code. Fix this warning.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:02 -07:00
Anirudh Venkataramanan
a69606cde1 ice: downgrade error print to debug print
Failing to add or remove LLDP filter doesn't seem to be a fatal
error, so downgrade the dev_err message to a dev_dbg message.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Anirudh Venkataramanan
c77849f546 ice: Detect and report unsupported module power levels
Determine whether an unsupported power configuration is preventing link
establishment by storing and checking the link_cfg_err_byte. Print error
messages when module power levels are unsupported. Also add a new flag
bit to prevent spamming said error messages.

Co-developed-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Jacob Keller
97a4ec0107 ice: (re)initialize NVM fields when rebuilding
After performing a flash update, a device EMP reset may occur. This
reset will cause the newly downloaded firmware to be initialized. When
this happens, the driver still reports the previous NVM version
information.

This is because the NVM versions are cached within the hw structure.
This can be confusing, as the new firmware is in fact running in this
case.

Handle this by calling ice_init_nvm when rebuilding the driver state.
This will update the flash version information and ensures that the
current values are displayed when reporting the NVM versions to the
stack.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Jacob Keller
1c08052ec4 ice: wait for reset before reporting devlink info
Requesting device firmware information while the device is busy cleaning
up after a reset can result in an unexpected failure:

This occurs because the command is attempting to access the device
AdminQ while it is down. Resolve this by having the command wait for
a while until the reset is complete. To do this, introduce
a reset_wait_queue and associated helper function "ice_wait_for_reset".

This helper will use the wait queue to sleep until the driver is done
rebuilding. Use of a wait queue is preferred because the potential sleep
duration can be several seconds.

To ensure that the thread wakes up properly, a new wake_up call is added
during all code paths which clear the reset state bits associated with
the driver rebuild flow.

Using this ensures that tools can request device information without
worrying about whether the driver is cleaning up from a reset.
Specifically, it is expected that a flash update could result in
a device reset, and it is better to delay the response for information
until the reset is complete rather than exit with an immediate failure.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Jacob Keller
e872b94f9c ice: add error message when pldmfw_flash_image fails
When flashing a new firmware image onto the device, the pldmfw library
parses the image contents looking for a matching record. If no record
can be found, the function reports an error of -ENOENT. This can produce
a very confusing error message and experience for the user:

  $devlink dev flash pci/0000🆎00.0 file image.bin
  devlink answers: No such file or directory

This is because the ENOENT error code is interpreted as a missing file
or directory. The pldmfw library does not have direct access to the
extack pointer as it is generic and non-netdevice specific. The only way
that ENOENT is returned by the pldmfw library is when no record matches.

Catch this specific error and report a suitable extended ack message:

  $devlink dev flash pci/0000🆎00.0 file image.bin
  Error: ice: Firmware image has no record matching this device
  devlink answers: No such file or directory

In addition, ensure that we log an error message to the console whenever
this function fails. Because our driver specific PLDM operation
functions potentially set the extended ACK message, avoid overwriting
this with a generic message.

This change should result in an improved experience when attempting to
flash an image that does not have a compatible record.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Jacob Keller
d5f84ae95f ice: add extack when unable to read device caps
When filling out information for the DEVLINK_CMD_INFO_GET, the driver
needs to read some device capabilities. Add an extack message to
properly inform the caller of the failure, as we do for other failures
in this function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Jesse Brandeburg
96cf4f689b ice: use static inline for dummy functions
Trivial:
The driver had previously attempted to use #define
macros to make functions that have no use in certain
configs disappear. Using static inlines instead allows
for certain static checkers to process the code better,
and results in no functional change.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Salil Mehta
b38b7f2bb4 ice: Re-organizes reqstd/avail {R, T}XQ check/code for efficiency
If user has explicitly requested the number of {R,T}XQs, then it is
unnecessary to get the count of already available {R,T}XQs from the
PF avail_{r,t}xqs bitmap. This value will get overridden by user specified
value in any case.

Re-organize this code for improving the flow, readability and efficiency.
This scope of improvement was found during the review of the ICE driver
code.

Fixes: 87324e747f ("ice: Implement ethtool ops for channels")
Cc: intel-wired-lan@lists.osuosl.org
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Liwei Song
fb3612840d ice: set the value of global config lock timeout longer
It may need hold Global Config Lock a longer time when download DDP
package file, extend the timeout value to 5000ms to ensure that
download can be finished before other AQ command got time to run,
this will fix the issue below when probe the device, 5000ms is a test
value that work with both Backplane and BreakoutCable NVM image:

ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG
ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT
ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Brett Creeley
7ad15440ac ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling
Currently, when a VF requests queue configuration via
VIRTCHNL_OP_CONFIG_VSI_QUEUES the PF driver expects that this message
will only be called once and we always assume the queues being
configured start from 0. This is incorrect and is causing issues when
a VF tries to send this message for multiple queue blocks. Fix this by
using the queue_id specified in the virtchnl message and allowing for
individual Rx and/or Tx queues to be configured.

Also, reduce the duplicated for loops for configuring the queues by
moving all the logic into a single for loop.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:59:01 -07:00
Krzysztof Kazimierczak
43c7f9198d ice: Refactor ice_setup_rx_ctx
Move AF_XDP logic and buffer allocation out of ice_setup_rx_ctx() to a
new function ice_vsi_cfg_rxq(), so the function actually sets up the Rx
context.

Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Co-developed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
2021-06-07 08:58:56 -07:00
Hailong Liu
bcc936c5d5 cpufreq: loongson2: Remove unused linux/sched.h headers
Since commit 759f534e93ac(CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()),
the header <linux/sched.h> is useless in oongson2_cpufreq.c, so remove it.

Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07 17:43:52 +02:00
Hailong Liu
019694f5c1 cpufreq: sh: Remove unused linux/sched.h headers
Since commit '205dcc1ecbc5(cpufreq/sh: Replace racy task affinity logic)'
the header <linux/sched.h> is useless in sh-cpufreq.c, so remove it.

Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07 17:38:26 +02:00
Brett Creeley
f28cd5ce1a ice: Save VF's MAC across reboot
If a VM reboots and/or VF driver is unloaded, its cached hardware MAC
address (hw_lan_addr.addr) is cleared in some cases. If the VF is
trusted, then the PF driver allows the VF to clear its old MAC address
even if this MAC was configured by a host administrator. If the VF is
untrusted, then the PF driver allows the VF to clear its old MAC
address only if the host admin did not set it.

For the trusted VF case, this is unexpected and will cause issues
because the host configured MAC (i.e. via XML) will be cleared on VM
reboot. For the untrusted VF case, this is done to be consistent and it
will allow the VF to keep the same MAC across VM reboot.

Fix this by introducing dev_lan_addr to the VF structure. This will be
the VF's MAC address when it's up and running and in most cases will be
the same as the hw_lan_addr. However, to address the VM reboot and
unload/reload problem, the driver will never allow the hw_lan_addr to be
cleared via VIRTCHNL_OP_DEL_ETH_ADDR. When the VF's MAC is changed, the
dev_lan_addr and hw_lan_addr will always be updated with the same value.
The only ways the VF's MAC can change are the following:

- Set the VF's MAC administratively on the host via iproute2.
- If the VF is trusted and changes/sets its own MAC.
- If the VF is untrusted and the host has not set the MAC via iproute2.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:30:58 -07:00
Brett Creeley
51efbbdf1d ice: Manage VF's MAC address for both legacy and new cases
Currently there is no way for a VF driver to specify if it wants to
change it's hardware address. New bits are being added to virtchnl.h
in struct virtchnl_ether_addr that allow for the VF to correctly
communicate this information. However, legacy VF drivers that don't
support the new virtchnl.h bits still need to be supported. Make a
best effort attempt at saving the VF's primary/device address in the
legacy case and depend on the VIRTCHNL_ETHER_ADDR_PRIMARY type for
the new case.

Legacy case - If a unicast MAC is being added and the
hw_lan_addr.addr is empty, then populate it. This assumes that the
address is the VF's hardware address. If a unicast MAC is being
added and the hw_lan_addr.addr is not empty, then cache it in the
legacy_last_added_umac.addr. If a unicast MAC is being deleted and it
matches the hw_lan_addr.addr, then zero the hw_lan_addr.addr.
Also, if the legacy_last_added_umac.addr has not expired, copy the
legacy_last_added_umac.addr into the hw_lan_addr.addr. This is done
because we cannot guarantee the order of VIRTCHNL_OP_ADD_ETH_ADDR and
VIRTCHNL_OP_DEL_ETH_ADDR.

New case - If a unicast MAC is being added and it's specified as
VIRTCHNL_ETHER_ADDR_PRIMARY, then replace the current
hw_lan_addr.addr. If a unicast MAC is being deleted and it's type
is specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then zero the
hw_lan_addr.addr.

Untrusted VFs - Only allow above legacy/new changes to their
hardware address if the PF has not set it administratively via
iproute2.

Trusted VFs - Always allow above legacy/new changes to their
hardware address even if the PF has administratively set it via
iproute2.

Also, change the variable dflt_lan_addr to hw_lan_addr to clearly
represent the purpose of this variable since it's purpose is to
act as a hardware programmed MAC address for the VF.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:30:58 -07:00
Brett Creeley
eb550f5309 virtchnl: Use pad byte in virtchnl_ether_addr to specify MAC type
Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.

Below are the values that should be used by all VF drivers going
forward.

VIRTCHNL_ETHER_ADDR_LEGACY(0):
	- The type should only ever be 0 for legacy AVF drivers (i.e.
	  drivers that don't support the new type bits). The PF drivers
	  will track VF's device/primary unicast MAC, but this will only
	  be a best effort.

VIRTCHNL_ETHER_ADDR_PRIMARY(1):
	- This type should only be used when the VF is changing their
	  device/primary unicast MAC. It should be used for both delete
	  and add cases related to the device/primary unicast MAC.

VIRTCHNL_ETHER_ADDR_EXTRA(2):
	- This type should be used when the VF is adding and/or deleting
	  MAC addresses that are not the device/primary unicast MAC. For
	  example, extra unicast addresses and multicast addresses
	  assuming the PF supports "extra" addresses at all.

If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07 08:30:58 -07:00
Jay Fang
2b2142f247
spi: hisi-kunpeng: Add debugfs support
This patch uses debugfs_regset32 interface to create the registers dump
file. Use it instead of creating a generic debugfs file with manually
written read callback function.

With these entries, users can check all the SPI controller registers
during run time.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1622789718-13977-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-07 16:24:12 +01:00
Axel Lin
73d4ae57f8
regulator: mt6359: Get rid of linear_range tables
The MT6359_BUCK and MT6359_LDO_LINEAR macros setup both
linear settings (min_uV, uV_step, linear_min_sel) and linar_range
(linear_ranges, n_linear_ranges) settings.
All the linear range tables actually only has one entry.
Let's simplify it by using linear instead of linear range.

The linear_min_sel setting is 0 for all cases, remove it
from the macros.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-07 16:24:09 +01:00
Axel Lin
5a5e31150c
regulator: mt6359: Use unsigned int for volt_tables
The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-07 16:24:09 +01:00
Axel Lin
431ea63b64
regulator: mt6358: Use unsigned int for volt_tables
The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-07 16:24:08 +01:00