-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTcNYgAKCRDh3BK/laaZ
PCaHAQCTfaWYK+H6kNIffxnRG+yGsMAmoZLGbc5l9M5GeTEmtgEA0vkmWbDt4h/I
PSA0Q2T0gzSsBdxkF4jQHqKO+HGMVg8=
=Vh9A
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Allow mounting an active fuse device. Previously the fuse device
would always be mounted during initialization, and sharing a fuse
superblock was only possible through mount or namespace cloning
- Fix data flushing in syncfs (virtiofs only)
- Fix data flushing in copy_file_range()
- Fix a possible deadlock in atomic O_TRUNC
- Misc fixes and cleanups
* tag 'fuse-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove unused arg in fuse_write_file_get()
fuse: wait for writepages in syncfs
fuse: flush extending writes
fuse: truncate pagecache on atomic_o_trunc
fuse: allow sharing existing sb
fuse: move fget() to fuse_get_tree()
fuse: move option checking into fuse_fill_super()
fuse: name fs_context consistently
fuse: fix use after free in fuse_read_interrupt()
Improve the existing documentation of the Energy Model and add kernel-doc
comments. This extends an API description and helps better understanding
the usage.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the kernel-doc comments for the improved Energy Model documentation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current HWP calibration for hybrid processors in intel_pstate is
fragile, because it depends too much on the information provided by
the platform firmware via CPPC which may not be reliable enough. It
also need not be so complicated.
In order to improve that mechanism and make it more resistant to
platform firmware issues, make it only use the CPPC nominal_perf
values to compute the HWP-to-frequency scaling factors for all
CPUs and possibly use the HWP_CAP highest_perf values to recompute
them if the ones derived from the CPPC nominal_perf values alone
appear to be too high.
Namely, fetch CPC.nominal_perf for all CPUs present in the system,
find the minimum one and use it as a reference for computing all of
the CPUs' scaling factors (using the observation that for the CPUs
having the minimum CPC.nominal_perf the HWP range of available
performance levels should be the same as the range of available
"legacy" P-states and so the HWP-to-frequency scaling factor for
them should be the same as the corresponding scaling factor used
for representing the P-state values in kHz).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
On some systems the nominal_perf value retrieved via CPPC is just
a constant and fetching it doesn't require accessing any registers,
so if it is the only CPPC capability that's needed, it is wasteful
to run cppc_get_perf_caps() in order to get just that value alone,
especially when this is done for CPUs other than the one running
the code.
For this reason, introduce cppc_get_nominal_perf() allowing
nominal_perf to be obtained individually, by generalizing the
existing cppc_get_desired_perf() (and renaming it) so it can be
used to retrieve any specific CPPC capability value.
While at it, clean up the cppc_get_desired_perf() kerneldoc comment
a bit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Code that use linux/nls.h was moved to device_sysfs.c by commit
c2efefb33a ("ACPI / scan: Move sysfs-related device code to a separate file")
Remove this include so that complier has easier times and it would be
easier to grep where nls code is used.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function has the 'irq' parameter which isn't ever used, so drop it.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Changes for kgdb/kdb this cycle are dominated by a change from
Sumit that removes as small (256K) private heap from kdb. This is
change I've hoped for ever since I discovered how few users of this
heap remained in the kernel, so many thanks to Sumit for hunting
these down. Other change is an incremental step towards SPDX headers.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=iMIF
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Changes for kgdb/kdb this cycle are dominated by a change from Sumit
that removes as small (256K) private heap from kdb. This is change
I've hoped for ever since I discovered how few users of this heap
remained in the kernel, so many thanks to Sumit for hunting these
down.
The other change is an incremental step towards SPDX headers"
* tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kernel: debug: Convert to SPDX identifier
kdb: Rename members of struct kdbtab_t
kdb: Simplify kdb_defcmd macro logic
kdb: Get rid of redundant kdb_register_flags()
kdb: Rename struct defcmd_set to struct kdb_macro
kdb: Get rid of custom debug heap allocator
Indicator string for mbox and memdev register set to status
incorrectly in error message.
Cc: <stable@vger.kernel.org>
Fixes: 30af97296f ("cxl/pci: Map registers based on capabilities")
Signed-off-by: Li Qiang (Johnny Li) <johnny.li@montage-tech.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163072205089.2250120.8103605864156687395.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A proposed rework of security_locked_down() users identified that the
cxl_pci driver was passing the wrong lockdown_reason. Update
cxl_mem_raw_command_allowed() to fail raw command access when raw pci
access is also disabled.
Fixes: 13237183c7 ("cxl/mem: Add a "RAW" send command")
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/163072204525.2250120.16615792476976546735.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
During CXL ACPI probe, host bridge ports are discovered by scanning
the ACPI0017 root port for ACPI0016 host bridge devices. The scan
matches on the hardware id of "ACPI0016". An issue occurs when an
ACPI0016 device is defined in the DSDT yet disabled on the platform.
Attempts by the cxl_acpi driver to add host bridge ports using a
disabled device fails, and the entire cxl_acpi probe fails.
The DSDT table includes an _STA method that sets the status and the
ACPI subsystem has checks available to examine it. One such check is
in the acpi_pci_find_root() path. Move the call to acpi_pci_find_root()
to the matching function to prevent this issue when adding either
upstream or downstream ports.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Fixes: 7d4b5ca2e2 ("cxl/acpi: Add downstream port data to cxl_port instances")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163072203957.2250120.2178685721061002124.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This reverts commit b655843444.
Just like with the memcg lock accounting, the kernel test robot reports
a sizeable performance regression for this commit, and while it clearly
does the rigth thing in theory, we'll need to look at just how to avoid
or minimize the performance overhead of the memcg accounting.
People already have suggestions on how to do that, but it's "future
work".
So revert it for now.
[ Note: the first link below is for this same commit but a different
commit ID, because it's the kernel test robot ended up noticing it in
Andrew Morton's patch queue ]
Link: https://lore.kernel.org/lkml/20210905132732.GC15026@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 0f12156dff.
The kernel test robot reports a sizeable performance regression for this
commit, and while it clearly does the rigth thing in theory, we'll need
to look at just how to avoid or minimize the performance overhead of the
memcg accounting.
People already have suggestions on how to do that, but it's "future
work".
So revert it for now.
Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 9857a17f20.
That commit was completely broken, and I should have caught on to it
earlier. But happily, the kernel test robot noticed the breakage fairly
quickly.
The breakage is because "try_get_page()" is about avoiding the page
reference count overflow case, but is otherwise the exact same as a
plain "get_page()".
In contrast, "try_get_compound_head()" is an entirely different beast,
and uses __page_cache_add_speculative() because it's not just about the
page reference count, but also about possibly racing with the underlying
page going away.
So all the commentary about how
"try_get_page() has fallen a little behind in terms of maintenance,
try_get_compound_head() handles speculative page references more
thoroughly"
was just completely wrong: yes, try_get_compound_head() handles
speculative page references, but the point is that try_get_page() does
not, and must not.
So there's no lack of maintainance - there are fundamentally different
semantics.
A speculative page reference would be entirely wrong in "get_page()",
and it's entirely wrong in "try_get_page()". It's not about
speculation, it's purely about "uhhuh, you can't get this page because
you've tried to increment the reference count too much already".
The reason the kernel test robot noticed this bug was that it hit the
VM_BUG_ON() in __page_cache_add_speculative(), which is all about
verifying that the context of any speculative page access is correct.
But since that isn't what try_get_page() is all about, the VM_BUG_ON()
tests things that are not correct to test for try_get_page().
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct pt_regs is not exported to userspace on all archs. arm64 and s390
export "user_pt_regs" instead, which causes build failure at the moment:
progs/test_task_pt_regs.c:8:16: error: variable has incomplete type 'struct pt_regs'
struct pt_regs current_regs = {};
Instead of using pt_regs from ptrace.h, use the larger kernel struct
from vmlinux.h directly. Since the test runner task_pt_regs.c does not
have access to the kernel struct definition, copy it into a char array.
Fixes: 576d47bb1a ("bpf: selftests: Add bpf_task_pt_regs() selftest")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210906163635.302307-1-jean-philippe@linaro.org
Add a new block/fops.c for all the file and address_space operations
that provide the block special file support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-2-hch@lst.de
[axboe: correct trailing whitespace while at it]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- fix nvmet command set reporting for passthrough controllers
(Adam Manzanares)
- updated
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
-----BEGIN PGP SIGNATURE-----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=Qm9d
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.15-2021-09-07' of git://git.infradead.org/nvme into block-5.15
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.15
- fix nvmet command set reporting for passthrough controllers
(Adam Manzanares)
- updated
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)"
* tag 'nvme-5.15-2021-09-07' of git://git.infradead.org/nvme:
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.
Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
Revert commit d0e936adbd ("cpufreq: intel_pstate: Process HWP
Guaranteed change notification"), because it causes a NULL pointer
dereference to occur on Lenovo X1 gen9 laptops due to an HWP
guaranteed performance change interrupt arriving prematurely.
This feature will be revisited in the next cycle.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable ret is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang says:
====================
net: stmmac: fix WoL issue
This patch set fixes stmmac not working after system resume back with WoL
active. Thanks a lot for Russell King keeps looking into this issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reproduce this issue with below steps:
1) enable WoL on the host
2) host system suspended
3) remote client send out wakeup packets
We can see that host system resume back, but can't work, such as ping failed.
After a bit digging, this issue is introduced by the commit 46f69ded98
("net: stmmac: Use resolved link config in mac_link_up()"), which use
the finalised link parameters in mac_link_up() rather than the
parameters in mac_config().
There are two scenarios for MAC suspend/resume in STMMAC driver:
1) MAC suspend with WoL inactive, stmmac_suspend() call
phylink_mac_change() to notify phylink machine that a change in MAC
state, then .mac_link_down callback would be invoked. Further, it will
call phylink_stop() to stop the phylink instance. When MAC resume back,
firstly phylink_start() is called to start the phylink instance, then
call phylink_mac_change() which will finally trigger phylink machine to
invoke .mac_config and .mac_link_up callback. All is fine since
configuration in these two callbacks will be initialized, that means MAC
can restore the state.
2) MAC suspend with WoL active, phylink_mac_change() will put link
down, but there is no phylink_stop() to stop the phylink instance, so it
will link up again, that means .mac_config and .mac_link_up would be
invoked before system suspended. After system resume back, it will do
DMA initialization and SW reset which let MAC lost the hardware setting
(i.e MAC_Configuration register(offset 0x0) is reset). Since link is up
before system suspended, so .mac_link_up would not be invoked after
system resume back, lead to there is no chance to initialize the
configuration in .mac_link_up callback, as a result, MAC can't work any
longer.
After discussed with Russell King [1], we confirm that phylink framework
have not take WoL into consideration yet. This patch calls
phylink_suspend()/phylink_resume() functions which is newly introduced
by Russell King to fix this issue.
[1] https://lore.kernel.org/netdev/20210901090228.11308-1-qiangqing.zhang@nxp.com/
Fixes: 46f69ded98 ("net: stmmac: Use resolved link config in mac_link_up()")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang reports that Wake-on-Lan with the stmmac ethernet driver broke
when moving the incorrect handling of mac link state out of mac_config().
This reason this breaks is because the stmmac's WoL is handled by the MAC
rather than the PHY, and phylink doesn't cater for that scenario.
This patch adds the necessary phylink code to handle suspend/resume events
according to whether the MAC still needs a valid link or not. This is the
barest minimum for this support.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.
Fixes: 86a74ff21a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
btrfs_add_ordered_extent_*() add num_bytes to fs_info->ordered_bytes.
Then, splitting an ordered extent will call btrfs_add_ordered_extent_*()
again for split extents, leading to double counting of the region of
a split extent. These leaked bytes are finally reported at unmount time
as follow:
BTRFS info (device dm-1): at unmount dio bytes count 364544
Fix the double counting by subtracting split extent's size from
fs_info->ordered_bytes.
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When removing the device we call blkdev_put() on the device once we've
removed it, and because we have an EXCL open we need to take the
->open_mutex on the block device to clean it up. Unfortunately during
device remove we are holding the sb writers lock, which results in the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #407 Not tainted
------------------------------------------------------
losetup/11595 is trying to acquire lock:
ffff973ac35dd138 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_put+0x3a/0x220
btrfs_rm_device.cold+0x62/0xe5
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11595:
#0: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 0 PID: 11595 Comm: losetup Not tainted 5.14.0-rc2+ #407
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc21255d4cb
So instead save the bdev and do the put once we've dropped the sb
writers lock in order to avoid the lockdep recursion.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed. However we do this by re-opening the
block device and calling filp_update_time. This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this. Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_get_by_dev.part.0+0x56/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
file_open_name+0xc7/0x170
filp_open+0x2c/0x50
btrfs_scratch_superblocks.part.0+0x10f/0x170
btrfs_rm_device.cold+0xe8/0xed
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11596:
#0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
asm/do_div.h is for div_u64, but it is found in math64.h. This change
will make compiler job easier and prevent compiler errors in situation
where compiler will not find math64.h from another paths.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.
Fix this by reading the superblock sectorsize before the mount option
parse.
Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Support for expanded storage was only available until z13 and z/VM 6.3
respectively. However there haven't been any use cases a long time
before for this device driver.
Therefore remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We do not have to reset the fh_list in the loop.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With commit cc049eecfb ("s390/pci: simplify CLP List PCI handling")
clp_get_state() was changed to make use of the new clp_find_pci() helper
function to query a specific function. This however returns -ENODEV when
the device is not found at all and this error was passed to the caller.
It was missed however that the callers actually expect a success return
from clp_get_state() if the device is gone.
Fix this by handling the -ENODEV return of clp_find_pci() explicitly in
clp_get_state() returning success and setting the state parameter to
ZPCI_FN_STATE_RESERVED matching the design concept that a PCI function
that disappeared must have been resverved elsewhere. For all other error
returns continue to just pass them on to the caller.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cc049eecfb ("s390/pci: simplify CLP List PCI handling")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of this warning:
drivers/s390/char/con3270.c:629:22: warning: cast between incompatible function types from ‘void (*)(struct raw3270_request *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]
629 | (void (*)(unsigned long)) con3270_read_tasklet,
| ^
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move array from header to C file to avoid that it gets defined in
every C file where the header is included:
In file included from arch/s390/kernel/perf_cpum_cf_common.c:19:
./arch/s390/include/asm/cpu_mcf.h:27:18: warning: ‘cpumf_ctr_ctl’ defined but not used [-Wunused-const-variable=]
27 | static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
| ^~~~~~~~~~~~~
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The cpu hotplug notifiers are called without updating the core/thread
masks when a new CPU is added. This causes problems with code setting
up data structures in a cpu hotplug notifier, and relying on that later
in normal code.
This caused a crash in the new core scheduling code (SCHED_CORE),
where rq->core was set up in a notifier depending on cpu masks.
To fix this, add a cpu_setup_mask which is used in update_cpu_masks()
instead of the cpu_online_mask to determine whether the cpu masks should
be set for a certain cpu. Also move update_cpu_masks() to update the
masks before calling notify_cpu_starting() so that the notifiers are
seeing the updated masks.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
[hca@linux.ibm.com: get rid of cpu_online_mask handling]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
current_stack_pointer() simply returns current value of %r15. If
current_stack_pointer() caller allocates stack (which is the case in
unwind code) %r15 points to a stack frame allocated for callees, meaning
current_stack_pointer() caller (e.g. stack_trace_save) will end up in
the stacktrace. This is not expected by stack_trace_save*() callers and
causes problems.
current_frame_address() on the other hand returns function stack frame
address, which matches %r15 upon function invocation. Using it in
get_stack_pointer() makes it more aligned with x86 implementation
(according to BACKTRACE_SELF_TEST output) and meets stack_trace_save*()
caller's expectations, notably KCSAN.
Also make sure unwind_start is always inlined.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/patch.git-04dd26be3043.your-ad-here.call-01630504868-ext-6188@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The legacy ISA probe tries to probe the card repeatedly, and this
would conflict with the refactoring using devres. Put the card
creation out of the loop and only probe GUS object repeatedly.
Fixes: 5b88da3c80 ("ALSA: gus: Allocate resources with device-managed APIs")
Link: https://lore.kernel.org/r/20210907093930.29009-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GUS card object may be repeatedly probed for the legacy ISA devices,
and the behavior doesn't fit with the devres resource management.
Revert partially back to the classical way for the snd_gus_card
object, so that the repeated calls of snd_gus_create() are allowed.
Fixes: 5b88da3c80 ("ALSA: gus: Allocate resources with device-managed APIs")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/20210907093930.29009-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The parameter bond_params is a relatively large 192 byte sized
struct so pass it by reference rather than by value to reduce
copying.
Addresses-Coverity: ("Big parameter passed by value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
