There is a clock driver that's needed when using an external
USB reference clock called usb2_clksel.
Enable it in the defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to Documentation/devicetree/bindings/arm/cpus.yaml, the
"enable-method" property should be a property of the individual CPU
nodes, and not of the parent "cpus" container node.
However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the
"cpus" node instead.
Secondary CPU bringup and CPU hot (un)plug work regardless, as
arm_dt_init_cpu_maps() falls back to looking in the "cpus" node.
The cpuidle code does not have such a fallback, so it does not detect
the enable-method. Note that cpuidle does not support the
"renesas,apmu" enable-method yet, so for now this does not make any
difference.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel. Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.
Fixes: 665d79aa47 ("ARM: shmobile: marzen: Add DU external pixel clock to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Condor, the VCC is connected to
3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux
to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Thanks to Marek Vasut for this description from commit 5f65328df3
("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB").
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210419143858.39401-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The AVB reference clock assumes an external clock that runs
automatically. Because the Versaclock is wired to provide the
AVB refclock, the device tree needs to reference it in order for the
driver to start the clock.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210224115146.9131-5-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com
[geert: Update new r8a779a0.dtsi]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
aspeed-ast2600-evb.dts was modified for supporting A2 evb.
Since A1/A0 evbs don't have GPIO regulators and SD clock frequency
(SCU210) is different to A2 as well. Adding a new dts that removes new
nodes created in aspeed-ast2600-evb.dts is necessary.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-4-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set MMC timing-phase register by adding the phase correction binding in the
device tree.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
AST2600 A2 (or newer) EVB has gpio regulators for toggling signal voltage
between 3.3v and 1.8v, the patch adds sdhci node and gpio regulator in
the dts file and adds comment for describing the reference design.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-2-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
When main component is not probed, by example when the dw-hdmi module is
not loaded yet or in probe defer, the following crash appears on shutdown:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
pc : meson_drv_shutdown+0x24/0x50
lr : platform_drv_shutdown+0x20/0x30
...
Call trace:
meson_drv_shutdown+0x24/0x50
platform_drv_shutdown+0x20/0x30
device_shutdown+0x158/0x360
kernel_restart_prepare+0x38/0x48
kernel_restart+0x18/0x68
__do_sys_reboot+0x224/0x250
__arm64_sys_reboot+0x24/0x30
...
Simply check if the priv struct has been allocated before using it.
Fixes: fa0c16caf3 ("drm: meson_drv add shutdown function")
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430082744.3638743-1-narmstrong@baylibre.com
Returning an nvme status from nvme_fc_create_association() indicates
that the association is established, and we should honour the DNR bit.
If it's set a reconnect attempt will just return the same error, so
we can short-circuit the reconnect attempts and fail the connection
directly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210524120007.39728-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the inclusion of Omni 56K Plus, this driver seem to be more common
among the family of Zyxel omni modem. Update the driver and module
descriptions.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
[ johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Link: https://lore.kernel.org/r/20210524093811.612302-1-yuyufen@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCraeoACgkQJNaLcl1U
h9BuVgf+Ith7351Fz+Jd1Y8e0rdVXuR4qVrkwm6u93/PRmFsL8DDWfURiHPuXJ+W
7NgsyreQEDLJYom8qloda/Lva2+FB0BHHkzUVLiZ7mDdbYq9Dush0QLLnOSP4p3O
GeeFJeK4EkeGHHFBbFllJ6gVB9xiokEcghXz1a+PkNMkYuQpAswlvhHxlIfEk1Bv
p1DBcM3gfT+3kfGynyz9A2O01zSd34Eg7tQuMqObxwFwpWY9mzrlYaPLdLF7Vtgc
JyQVvjTMaUZtiN/zGUFyXxAboTGWIFlPJKvHLHCiKvivSveXamziasieUwDU/cBL
X5SuIh883CghMhp8Dtx39zpcuiwEZQ==
=sQPM
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
In former commit, ALSA IEC 61883-1/6 packet streaming engine drops
initial tx packets till the packet includes any event. This allows ALSA
bebob driver not to give option to skip initial packet since the engine
does drop the initial packet.
However, M-Audio ProFire Lightbridge has a quirk to stop packet
transmission after start multiplexing event to the packet. After several
thousands cycles, it restart packet transmission again.
This commit specializes the usage of initial skip option for the model.
Additionally, this commit expands timeout enough to wait processing
content of tx packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The member of callbacked in AMDTP stream structure is not used anymore.
Instead, ready_processing member is used to wake up yielding task of user
process.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The devices based on BeBoB ASICs or the devices in Tascam FireWire
series transfer a batch of NODATA packet or empty packet in the beginning
of packet streaming. To avoid processing them, current implementation uses
an option to skip processing content of tx packet during some initial
cycles. However, the hard-coded number is not enough useful.
This commit drops content of packets till the packet includes any event
firstly. The function of option is to skip processing content of tx packet
with any event after dropping.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The normal PCM operations are already blocked during the card power
off state in the PCM common ioctl handler, but the release isn't
covered. As the PCM stream release may also access the hardware,
let's block the release until the card power turns on.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The power_state argument of snd_power_wait() is superfluous, receiving
only SNDRV_POWER_STATE_D0. Let's drop it in all callers for
simplicity.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210523090920.15345-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Long long time ago, before the proper PM framework was introduced, it
was still possible to reach SNDRV_CTL_IOCTL_POWER ioctl during the
power off state. This ioctl existed as a main control for the suspend
resume state in the past, but the feature was already dropped along
with the standard PM framework. Now the read part,
SNDRV_IOCTL_POWER_STATE ioctl, returns practically always D0, and we
can do some minor optimization there.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we have more fine-grained power controls in each kcontrol ops, the
coarse checks of snd_power_wait() in a few control ioctls became
superfluous. Let's drop them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the power state check is performed in various places (e.g. at
the entrance of quite a few ioctls), there can be still some pending
tasks that already went into the ioctl handler or other ops, and those
may access the hardware even after the power state check. For
example, kcontrol access ioctl paths that call info/get/put callbacks
may update the hardware registers. If a system wants to assure the
free from such hw access (like the case of PCI rescan feature we're
going to implement in future), this situation must be avoided, and we
have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code:
- A refcount, power_ref, and a wait queue, power_ref_sleep, to the
card object
- A few new helpers, snd_power_ref(), snd_power_unref(),
snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the
power state with the newly introduced snd_power_ref_and_wait(). This
function also takes the card.power_ref refcount for tracking this
in-flight task. Once after the access finishes, snd_power_unref() is
called to released the refcount in return. So the driver can sync via
snd_power_sync_ref() assuring that all in-flight tasks have been
finished.
As of this patch, snd_power_sync_ref() is called only at
snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of
refcount_t. It's because of the design of refcount_t type; refcount_t
cannot be zero-based, and it cannot do dec_and_test() call for
multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only
SNDRV_CTL_POWER_D0, which is the only value that makes sense.
In later patch, the snd_power_wait() calls will be cleaned up.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need proper barriers to handle the power state change of the card
from different CPUs.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix table returned when port_clock > 270000:
drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c:752:47: error: variable 'adlp_dkl_phy_dp_ddi_trans_hbr2_hbr3' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
Initial version of the patch had it in a single table, but on second
version the table got split, but we continued to reference just one of
them.
Fixes: ca96288226 ("drm/i915/adl_p: Define and use ADL-P specific DP translation tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521005209.4058702-1-lucas.demarchi@intel.com
Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.
Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.
For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e97 ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").
Fixes: b4a9a7a389 ("bus: ti-sysc: Handle swsup idle mode quirks")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Fix some spelling mistakes in comments:
aother ==> another
Netiher ==> Neither
desribe ==> describe
intializing ==> initializing
funciton ==> function
wont ==> won't and move the word 'the' at the end to the next line
accross ==> across
pathes ==> paths
triggerred ==> triggered
excute ==> execute
ether ==> either
conervative ==> conservative
convetion ==> convention
markes ==> marks
interpeter ==> interpreter
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210525025659.8898-2-thunder.leizhen@huawei.com
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for samples/bpf/ibumad_kern.c follows this syntax, but
the content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* ibumad BPF sample kernel side
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/bpf/20210523151408.22280-1-yashsri421@gmail.com
LLVM patch https://reviews.llvm.org/D102712
narrowed the scope of existing R_BPF_64_64
and R_BPF_64_32 relocations, and added three
new relocations, R_BPF_64_ABS64, R_BPF_64_ABS32
and R_BPF_64_NODYLD32. The main motivation is
to make relocations linker friendly.
This change, unfortunately, breaks libbpf build,
and we will see errors like below:
libbpf: ELF relo #0 in section #6 has unexpected type 2 in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o
Error: failed to link
'/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o':
Unknown error -22 (-22)
The new relocation R_BPF_64_ABS64 is generated
and libbpf linker sanity check doesn't understand it.
Relocation section '.rel.struct_ops' at offset 0x1410 contains 1 entries:
Offset Info Type Symbol's Value Symbol's Name
0000000000000018 0000000700000002 R_BPF_64_ABS64 0000000000000000 nogpltcp_init
Look at the selftests/bpf/bpf_tcp_nogpl.c,
void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
{
}
SEC(".struct_ops")
struct tcp_congestion_ops bpf_nogpltcp = {
.init = (void *)nogpltcp_init,
.name = "bpf_nogpltcp",
};
The new llvm relocation scheme categorizes 'nogpltcp_init' reference
as R_BPF_64_ABS64 instead of R_BPF_64_64 which is used to specify
ld_imm64 relocation in the new scheme.
Let us fix the linker sanity checking by including
R_BPF_64_ABS64 and R_BPF_64_ABS32. There is no need to
check R_BPF_64_NODYLD32 which is used for .BTF and .BTF.ext.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210522162341.3687617-1-yhs@fb.com
trivial-devices.yaml already provide bindings for fsl-mma8450.
Since input/fsl-mma8450.txt provides no extra value, lets remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210521192210.12839-1-clabbe@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Return error code -EINVAL rather than '0' when the combo devices are not
supported.
Fixes: fa71c605c2 ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add "Select" button input capability and input event mapping for
Microsoft Xbox One controller. From product site this is also referred as
"Share" button.
Signed-off-by: Chris Ye <lzye@google.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20210414021201.2462114-1-lzye@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the four control requests which erroneously used usb_rcvctrlpipe().
Fixes: 1d3e20236d ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver")
Fixes: 24ced062a2 ("usbtouchscreen: add support for DMC TSC-10/25 devices")
Fixes: 9e3b25837a ("Input: usbtouchscreen - add support for e2i touchscreen controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 2.6.17
Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>