Commit graph

1,044,825 commits

Author SHA1 Message Date
Desmond Cheong Zhi Xi
f7d21f444a Staging: rtl8723bs: fix line continuations in HalBtc8723b1Ant.c
In addition to removing line continuations, the indentation of some
lines were fixed. This was done to avoid the introduction of new
warnings because removing the line continuations caused checkpatch.pl
to emit "CHECK: Alignment should match open parenthesis".

This commit fixes the following checkpatch.pl warnings:

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d/ %d", "Ant PG Num/ Ant Mech/ Ant Pos:", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %s / %d", "BT stack/ hci ext ver", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d_%x/ 0x%x/ 0x%x(%d)", "CoexVer/ FwVer/ PatchVer", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d / %d(%d)", "Dot11 channel / HsChnl(HsMode)", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %02x %02x %02x ", "H2C Wifi inform bt chnl Info", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d", "Wifi rssi/ HS rssi", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d/ %d/ %s", "Wifi bLink/ bRoam/ bScan/ bHi-Pri", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %s / %s/ %s/ AP =%d/ %s ", "Wifi status", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d/ %d/ %d/ %d", "sta/vwifi/hs/p2pGo/p2pGc", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = [%s/ %d/ %d/ %d] ", "BT [status/ rssi/ retryCnt/ popCnt]", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d / %d / %d / %d", "SCO/HID/PAN/A2DP", \

WARNING: Avoid unnecessary line continuations
+		CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = %s", "BT Role", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %s", "BT Info A2DP rate", \

WARNING: Avoid unnecessary line continuations
+				"\r\n %-35s = %02x %02x %02x %02x %02x %02x %02x(%d)", GLBtInfoSrc8723b1Ant[i], \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %s/%s, (0x%x/0x%x)", "PS state, IPS/LPS, (lps/rpwm)", \

WARNING: Avoid unnecessary line continuations
+			"\r\n %-35s = %d", "SM[LowPenaltyRA]", \

WARNING: Avoid unnecessary line continuations
+			"\r\n %-35s = %s/ %s/ %d ", "DelBA/ BtCtrlAgg/ AggSize", \

WARNING: Avoid unnecessary line continuations
+			"\r\n %-35s = 0x%x ", "Rate Mask", \

WARNING: Avoid unnecessary line continuations
+		CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = %02x %02x %02x %02x %02x case-%d (auto:%d)", "PS TDMA", \

WARNING: Avoid unnecessary line continuations
+		CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d", "Coex Table Type", \

WARNING: Avoid unnecessary line continuations
+		CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = %d", "IgnWlanAct", \

WARNING: Avoid unnecessary line continuations
+	CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/0x%x/0x%x/0x%x", "backup ARFR1/ARFR2/RL/AMaxTime", \

WARNING: Avoid unnecessary line continuations
+	CL_SPRINTF(cliBuf, BT_TMP_BUF_SIZE, "\r\n %-35s = 0x%x/0x%x/0x%x/0x%x", "0x430/0x434/0x42a/0x456", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x", "0x778/0x6cc/0x880[29:25]", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x/ 0x%x", "0x948/ 0x67[5] / 0x764 / 0x76e", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x", "0x92c[1:0]/ 0x930[7:0]/0x944[1:0]", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x/ 0x%x", "0x38[11]/0x40/0x4c[24:23]/0x64[0]", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x", "0x550(bcn ctrl)/0x522", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x", "0xc50(dig)/0x49c(null-drop)", \

WARNING: Avoid unnecessary line continuations
+		(u4Tmp[1] & 0xffff) +  (u4Tmp[2] & 0xffff) + \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x", "OFDM-CCA/OFDM-FA/CCK-FA", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d/ %d/ %d", "CRC_OK CCK/11g/11n/11n-Agg", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d/ %d/ %d", "CRC_Err CCK/11g/11n/11n-Agg", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = 0x%x/ 0x%x/ 0x%x", "0x6c0/0x6c4/0x6c8(coexTable)", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d", "0x770(high-pri rx/tx)", \

WARNING: Avoid unnecessary line continuations
+		"\r\n %-35s = %d/ %d", "0x774(low-pri rx/tx)", \

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-7-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Desmond Cheong Zhi Xi
557c232536 Staging: rtl8723bs: add missing blank line in HalBtc8723b1Ant.c
This commit fixes the following checkpatch.pl warning:

WARNING: Missing a blank line after declarations
+	struct btc_bt_link_info *pBtLinkInfo = &pBtCoexist->btLinkInfo;
+	halbtc8723b1ant_BtRssiState(2, 28, 0);

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-6-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Desmond Cheong Zhi Xi
aa62018944 Staging: rtl8723bs: fix comparison formatting in HalBtc8723b1Ant.c
This commit fixes the following checkpatch.pl warnings:

WARNING: Comparisons should place the constant on the right side of the test
+		BT_8723B_1ANT_BT_STATUS_NON_CONNECTED_IDLE == pCoexDm->btStatus

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_NON_CONNECTED_IDLE == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_CONNECTED_IDLE == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_CONNECTED_IDLE == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_CONNECTED_IDLE != pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_WIFI_STATUS_NON_CONNECTED_ASSO_AUTH_SCAN == wifiStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_WIFI_STATUS_CONNECTED_SCAN == wifiStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_WIFI_STATUS_CONNECTED_SPECIAL_PKT == wifiStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		if (BT_8723B_1ANT_WIFI_STATUS_CONNECTED_IDLE == wifiStatus) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) {

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+	if (BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) {

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus &&

WARNING: Comparisons should place the constant on the right side of the test
+		if (BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) {

WARNING: Comparisons should place the constant on the right side of the test
+			(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+			(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		if (BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) {

WARNING: Comparisons should place the constant on the right side of the test
+			(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+			(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		((bWifiUnderBMode) ? "11b" : ((BTC_WIFI_BW_LEGACY == wifiBw) ? "11bg" : (((BTC_WIFI_BW_HT40 == wifiBw) ? "HT40" : "HT20")))),

WARNING: Comparisons should place the constant on the right side of the test
+		((!bWifiBusy) ? "idle" : ((BTC_WIFI_TRAFFIC_TX == wifiTrafficDir) ? "uplink" : "downlink")),

WARNING: Comparisons should place the constant on the right side of the test
+		((pBtCoexist->btInfo.bBtDisabled) ? ("disabled") : ((pCoexSta->bC2hBtInquiryPage) ? ("inquiry/page scan") : ((BT_8723B_1ANT_BT_STATUS_NON_CONNECTED_IDLE == pCoexDm->btStatus) ? "non-connected idle" :

WARNING: Comparisons should place the constant on the right side of the test
+		((BT_8723B_1ANT_BT_STATUS_CONNECTED_IDLE == pCoexDm->btStatus) ? "connected-idle" : "busy")))),

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_IPS_ENTER == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	} else if (BTC_IPS_LEAVE == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_LPS_ENABLE == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	} else if (BTC_LPS_DISABLE == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_SCAN_START == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_SCAN_START == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	} else if (BTC_SCAN_FINISH == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_ASSOCIATE_START == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_ASSOCIATE_START == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	} else if (BTC_ASSOCIATE_FINISH == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_MEDIA_CONNECT == type) {

WARNING: Comparisons should place the constant on the right side of the test
+	if ((BTC_MEDIA_CONNECT == type) && (wifiCentralChnl <= 14)) {

WARNING: Comparisons should place the constant on the right side of the test
+		if (BTC_WIFI_BW_HT40 == wifiBw)

WARNING: Comparisons should place the constant on the right side of the test
+		BTC_PACKET_DHCP == type ||

WARNING: Comparisons should place the constant on the right side of the test
+		BTC_PACKET_EAPOL == type ||

WARNING: Comparisons should place the constant on the right side of the test
+		BTC_PACKET_ARP == type

WARNING: Comparisons should place the constant on the right side of the test
+		if (BTC_PACKET_ARP == type) {

WARNING: Comparisons should place the constant on the right side of the test
+		BTC_PACKET_DHCP == type ||

WARNING: Comparisons should place the constant on the right side of the test
+		BTC_PACKET_EAPOL == type ||

WARNING: Comparisons should place the constant on the right side of the test
+		((BTC_PACKET_ARP == type) && (pCoexSta->bWiFiIsHighPriTask))

WARNING: Comparisons should place the constant on the right side of the test
+	if (BT_INFO_SRC_8723B_1ANT_WIFI_FW != rspSource) {

WARNING: Comparisons should place the constant on the right side of the test
+		if (BT_8723B_1ANT_BT_STATUS_ACL_BUSY != pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_SCO_BUSY == pCoexDm->btStatus) ||

WARNING: Comparisons should place the constant on the right side of the test
+		(BT_8723B_1ANT_BT_STATUS_ACL_SCO_BUSY == pCoexDm->btStatus)

WARNING: Comparisons should place the constant on the right side of the test
+	if (BTC_WIFI_PNP_SLEEP == pnpState) {

WARNING: Comparisons should place the constant on the right side of the test
+	} else if (BTC_WIFI_PNP_WAKE_UP == pnpState) {

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-5-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Desmond Cheong Zhi Xi
3750ae9e79 Staging: rtl8723bs: fix indentation in HalBtc8723b1Ant.c
This commit fixes the following checkpatch.pl errors:

WARNING: suspect code indent for conditional statements (32, 33)
+				if (nCCKLockCounter < 5)
+				 nCCKLockCounter++;

WARNING: suspect code indent for conditional statements (32, 33)
+				if (nCCKLockCounter > 0)
+				 nCCKLockCounter--;

WARNING: suspect code indent for conditional statements (24, 26)
+			if (nCCKLockCounter > 0)
+			  nCCKLockCounter--;

WARNING: suspect code indent for conditional statements (16, 17)
+		if (nCCKLockCounter >= 5)
+		 pCoexSta->bCCKLock = true;

WARNING: suspect code indent for conditional statements (16, 17)
+		else
+		 pCoexSta->bCCKLock = false;

WARNING: suspect code indent for conditional statements (16, 17)
+		if (nCCKLockCounter == 0)
+		 pCoexSta->bCCKLock = false;

WARNING: suspect code indent for conditional statements (16, 17)
+		else
+		 pCoexSta->bCCKLock = true;

WARNING: suspect code indent for conditional statements (16, 25)
+		if (bScan || bLink || bRoam) {
+			 if (bScan)

WARNING: Statements should start on a tabstop
+			 if (bScan)

WARNING: Statements should start on a tabstop
+			 else

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-4-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Desmond Cheong Zhi Xi
426ddc5298 Staging: rtl8723bs: fix spaces in HalBtc8723b1Ant.c
This commit fixes the following checkpatch.pl errors:

WARNING: please, no space before tabs
+^I/* ^IRx Aggregation related setting */$

WARNING: please, no space before tabs
+^Iu8 ^IH2C_Parameter[1] = {0};$

WARNING: please, no space before tabs
+^Iu8 ^IH2C_Parameter[6] = {0};$

WARNING: please, no space before tabs
+^I/* u32 ^I^IfwVer = 0; */$

WARNING: please, no space before tabs
+/* ^ISoftware Coex Mechanism start */$

WARNING: please, no space before tabs
+/* ^INon-Software Coex Mechanism start */$

WARNING: please, no space before tabs
+^I/* ^IBIT0: "0" for no antenna inverse; "1" for antenna inverse */$

WARNING: please, no space before tabs
+^I/* ^IBIT1: "0" for internal switch; "1" for external switch */$

WARNING: please, no space before tabs
+^I/* ^IBIT2: "0" for one antenna; "1" for two antenna */$

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-3-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Desmond Cheong Zhi Xi
83e9f677a4 Staging: rtl8723bs: remove unnecessary braces in HalBtc8723b1Ant.c
This commit fixes the following checkpatch.pl warnings:

WARNING: braces {} are not necessary for any arm of this statement
+			if (btRssi >= (rssiThresh + BTC_RSSI_COEX_THRESH_TOL_8723B_1ANT)) {
[...]
+			} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+			if (btRssi < rssiThresh) {
[...]
+			} else {
[...]

WARNING: braces {} are not necessary for single statement blocks
+		if (rssiThresh > rssiThresh1) {
+			return pCoexSta->preBtRssiState;
+		}

WARNING: braces {} are not necessary for any arm of this statement
+			if (btRssi >= (rssiThresh + BTC_RSSI_COEX_THRESH_TOL_8723B_1ANT)) {
[...]
+			} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+			if (btRssi >= (rssiThresh1 + BTC_RSSI_COEX_THRESH_TOL_8723B_1ANT)) {
[...]
+			} else if (btRssi < rssiThresh) {
[...]
+			} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+			if (btRssi < rssiThresh1) {
[...]
+			} else {
[...]

WARNING: braces {} are not necessary for single statement blocks
+	if (!pBtLinkInfo->bBtLinkExist) {
+		return algorithm;
+	}

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (bBtHsOn) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for any arm of this statement
+				if (u1Tmp & BIT0) {
[...]
+				} else {
[...]

WARNING: braces {} are not necessary for single statement blocks
+	if (pBtCoexist->bManualControl) {
+		return;
+	}

WARNING: braces {} are not necessary for single statement blocks
+	if (pBtCoexist->bStopCoexDm) {
+		return;
+	}

WARNING: braces {} are not necessary for single statement blocks
+	if (pCoexSta->bUnderIps) {
+		return;
+	}

WARNING: braces {} are not necessary for any arm of this statement
+		if ((pBtLinkInfo->bA2dpExist) && (pCoexSta->bC2hBtInquiryPage)) {
[...]
+		} else
[...]

WARNING: braces {} are not necessary for any arm of this statement
+	if (BTC_LPS_ENABLE == type) {
[...]
+	} else if (BTC_LPS_DISABLE == type) {
[...]

WARNING: braces {} are not necessary for single statement blocks
+			if (!pBtCoexist->bManualControl && !pBtCoexist->bStopCoexDm) {
+				halbtc8723b1ant_IgnoreWlanAct(pBtCoexist, FORCE_EXEC, false);
+			}

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Link: https://lore.kernel.org/r/20210518044119.2960494-2-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:50:55 +02:00
Michael Straube
509af4f98d staging: rtl8188eu: rename struct field bLedOn
Rename field bLedOn of struct LED_871x to avoid camel case.
bLedOn -> led_on

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210516103009.7184-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:49:30 +02:00
Shreyansh Chouhan
7f02d57e7c staging: rtl8723bs: fix coding style for if comparisions
Placed constants on the right side of the equality tests in rtw_xmit.c

Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Link: https://lore.kernel.org/r/20210515081446.676500-1-chouhan.shreyansh630@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:49:10 +02:00
Cláudio Maia
934de9eef1 staging: rtl8192u: Fix variable shadowing warning
Fixes the following sparse warnings:

drivers/staging/rtl8192u/r8192U_core.c:2306:21: warning: symbol 'i' shadows an earlier one
drivers/staging/rtl8192u/r8192U_core.c:2254:13: originally declared here
drivers/staging/rtl8192u/r8192U_core.c:2371:29: warning: symbol 'i' shadows an earlier one
drivers/staging/rtl8192u/r8192U_core.c:2254:13: originally declared here

Signed-off-by: Cláudio Maia <clrrm@isep.ipp.pt>
Link: https://lore.kernel.org/r/20210514230459.15752-1-clrrm@isep.ipp.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:48:35 +02:00
Guenter Roeck
ae12cf6bf9 staging: rtl8188eu: Drop unnecessary NULL check after container_of
The result of container_of() operations is never NULL unless the extracted
element is the first element of the embedded structure. This is not the
case here. The NULL check is therefore unnecessary and misleading.
Remove it.

This change was made automatically with the following Coccinelle script.

@@
type t;
identifier v;
statement s;
@@

<+...
(
  t v = container_of(...);
|
  v = container_of(...);
)
  ...
  when != v
- if (\( !v \| v == NULL \) ) s
...+>

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210514165557.1384106-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 17:46:07 +02:00
Joerg Roedel
c25bbdb564 x86/sev-es: Forward page-faults which happen during emulation
When emulating guest instructions for MMIO or IOIO accesses, the #VC
handler might get a page-fault and will not be able to complete. Forward
the page-fault in this case to the correct handler instead of killing
the machine.

Fixes: 0786138c78 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-3-joro@8bytes.org
2021-05-19 17:13:04 +02:00
Steve French
c0d46717b9 SMB3: incorrect file id in requests compounded with open
See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).

Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
2021-05-19 10:10:58 -05:00
Joerg Roedel
b250f2f779 x86/sev-es: Don't return NULL from sev_es_get_ghcb()
sev_es_get_ghcb() is called from several places but only one of them
checks the return value. The reaction to returning NULL is always the
same: calling panic() and kill the machine.

Instead of adding checks to all call sites, move the panic() into the
function itself so that it will no longer return NULL.

Fixes: 0786138c78 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-2-joro@8bytes.org
2021-05-19 17:05:13 +02:00
ChiYuan Huang
190ccab318 backlight: rt4831: Adds support for Richtek RT4831 backlight
Adds support for Richtek RT4831 backlight.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19 15:52:25 +01:00
ChiYuan Huang
f3e6c298e3 backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
Adds DT binding document for Richtek RT4831 backlight.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19 15:52:22 +01:00
Andy Shevchenko
6d1c32dbed backlight: lm3630a_bl: Put fwnode in error case during ->probe()
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Cc: Brian Masney <masneyb@onstation.org>
Cc: Dan Murphy <dmurphy@ti.com>
Fixes: 8fbce8efe1 ("backlight: lm3630a: Add firmware node support")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19 15:31:03 +01:00
Takashi Iwai
05ca447630 ALSA: line6: Fix racy initialization of LINE6 MIDI
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point.  This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.

This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race.  Also this reduces slightly more lines, so it's a win-win
change.

Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-19 16:25:57 +02:00
Takashi Iwai
e878e8c53e Merge branch 'topic/firewire' into for-next 2021-05-19 16:24:37 +02:00
Takashi Iwai
481f17c418 ALSA: usb-audio: Handle error for the current selector gracefully
Currently we bail out when the device returns an error or an invalid
value for the current clock selector value via
uac_clock_selector_get_val().  But it's possible that the device is
really uninitialized and waits for the setup of the proper route at
first.

For handling such a case, this patch lets the driver dealing with the
error or the invalid error more gracefully, choosing the clock source
automatically instead.

Link: https://lore.kernel.org/r/20210518152112.8016-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-19 16:23:05 +02:00
Takashi Iwai
9ec730052f ALSA: usb-audio: Refactoring UAC2/3 clock setup code
This patch just does refactoring of the UAC2/3 clock setup code.
There should be no functional changes.  The major changes are:

* Provide union objects for pointing both UAC2 and UAC3 objects
* Unify clock source, selector and multiplier helper functions
* Unify __uac_clock_find_source() to deal with both UAC2 and UAC3
  equally

Link: https://lore.kernel.org/r/20210518152112.8016-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-19 16:22:10 +02:00
Colin Ian King
a6de7b32b6 ALSA: rawmidi: fix incorrect array bounds check on clock_names
The array bounds check on clock_names is currently checking the size
of the entire array rather than the number of elements in the array
leading to a potential array bounds read error. Fix this by using
the ARRAY_SIZE macro instead of sizeof.

Addresses-Coverity: ("Out-of-bounds read")
Fixes: 08fdced60c ("ALSA: rawmidi: Add framing mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210519105424.55221-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-19 16:20:25 +02:00
Dan Carpenter
e2a0271094 staging: rtl8712: fix the bssid in mp_start_test()
We recently moved "bssid" off the stack, and allocated it with kmalloc()
instead.  Unfortunately, this one line was overlooked so it will copy
random data into the &tgt_network->network instead of the data we want.

Fixes: 0b18e5fe60 ("staging: rtl8712: rtl871x_mp_ioctl: Move a large data struct onto the heap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YJ6IrfkbdaTHgpEv@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19 16:02:51 +02:00
Teava Radu
39a6172ea8 platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.

Signed-off-by: Teava Radu <rateava@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com
2021-05-19 15:59:47 +02:00
Andy Shevchenko
bc1eca606d platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.

Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:59:47 +02:00
Hans de Goede
3a53587423 platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:

[  175.722921] ------------[ cut here ]------------
[  175.722925] Unexpected driver unregister!
[  175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[  175.723089] Call Trace:
[  175.723094]  cleanup_module+0x5/0xedd [dell_smbios]
...
[  175.723148] ---[ end trace 064c34e1ad49509d ]---

Make the unregister happen on the same condition the register happens
to fix this.

Cc: Mario Limonciello <mario.limonciello@outlook.com>
Fixes: 1a258e6704 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
2021-05-19 15:59:47 +02:00
Shyam Sundar S K
f048630bdd platform/x86: hp-wireless: add AMD's hardware id to the supported list
Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:59:47 +02:00
Hans de Goede
b68e182a30 platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
Commit 871f1f2bcb ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.

This workaround for the Asus E202SA is causing wakeup by USB keyboard to
not work on other devices with Airmont CPU cores such as the Medion Akoya
E1239T. In hindsight the problem with the Asus E202SA has nothing to do
with Silvermont vs Airmont CPU cores, so the differentiation between the
2 types of CPU cores introduced by the previous fix is wrong.

The real issue at hand is s2idle vs S3 suspend where the suspend is
mostly handled by firmware. The parent IRQ for the INT0002 device is shared
with the ACPI SCI and the real problem is that the INT0002 code should not
be messing with the wakeup settings of that IRQ when suspend/resume is
being handled by the firmware.

Note that on systems which support both s2idle and S3 suspend, which
suspend method to use can be changed at runtime.

This patch fixes both the Asus E202SA spurious wakeups issue as well as
the wakeup by USB keyboard not working on the Medion Akoya E1239T issue.

These are both fixed by replacing the old workaround with delaying the
enable_irq_wake(parent_irq) call till system-suspend time and protecting
it with a !pm_suspend_via_firmware() check so that we still do not call
it on devices using firmware-based (S3) suspend such as the Asus E202SA.

Note rather then adding #ifdef CONFIG_PM_SLEEP, this commit simply adds
a "depends on PM_SLEEP" to the Kconfig since this drivers whole purpose
is to deal with wakeup events, so using it without CONFIG_PM_SLEEP makes
no sense.

Cc: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 871f1f2bcb ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20210512125523.55215-2-hdegoede@redhat.com
2021-05-19 15:59:47 +02:00
Thomas Weißschuh
dac282def6 platform/x86: gigabyte-wmi: add support for B550 Aorus Elite
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-837210304

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-3-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:59:47 +02:00
Thomas Weißschuh
8605d64f48 platform/x86: gigabyte-wmi: add support for X570 UD
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/4

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-2-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:59:46 +02:00
Thomas Weißschuh
86bf2b8ffe platform/x86: gigabyte-wmi: streamline dmi matching
Streamline dmi matching.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:59:39 +02:00
Martin Blumenstingl
4cbf0cd6bf clk: meson: pll: switch to determine_rate for the PLL ops
This increases the maxmium supported frequency on 32-bit systems from
2^31 (signed long as used by clk_ops.round_rate, maximum value:
approx. 2.14GHz) to 2^32 (unsigned long as used by
clk_ops.determine_rate, maximum value: approx. 4.29GHz).
On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are
capable of running at up to 2.97GHz. So switch the divider
implementation in clk-regmap to clk_ops.determine_rate to support these
higher frequencies on 32-bit systems.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210517203724.1006254-4-martin.blumenstingl@googlemail.com
2021-05-19 15:48:12 +02:00
Adrian Hunter
0a0c597245 perf intel-pt: Remove redundant setting of ptq->insn_len
Remove redundant "ptq->insn_len = 0" statement.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210519074515.9262-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:35:31 -03:00
Alexei Starovoitov
5d67f34959 bpf: Add cmd alias BPF_PROG_RUN
Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519014032.20908-1-alexei.starovoitov@gmail.com
2021-05-19 15:35:12 +02:00
Adrian Hunter
c954eb72b3 perf intel-pt: Fix sample instruction bytes
The decoder reports the current instruction if it was decoded. In some
cases the current instruction is not decoded, in which case the instruction
bytes length must be set to zero. Ensure that is always done.

Note perf script can anyway get the instruction bytes for any samples where
they are not present.

Also note, that there is a redundant "ptq->insn_len = 0" statement which is
not removed until a subsequent patch in order to make this patch apply
cleanly to stable branches.

Example:

A machne that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.

 # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
 rtm

Test program:

 #include <stdio.h>
 #include <immintrin.h>

 int main()
 {
        int x = 0;

        if (_xbegin() == _XBEGIN_STARTED) {
                x = 1;
                _xabort(1);
        } else {
                printf("x = %d\n", x);
        }
        return 0;
 }

Compile with -mrtm i.e.

 gcc -Wall -Wextra -mrtm xabort.c -o xabort

Record:

 perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort

Before:

 # perf script --itrace=xe -F+flags,+insn,-period --xed --ns
          xabort  1478 [007] 92161.431348581:   transactions:   x                              400b81 main+0x14 (/root/xabort)          mov $0xffffffff, %eax
          xabort  1478 [007] 92161.431348624:   transactions:   tx abrt                        400b93 main+0x26 (/root/xabort)          mov $0xffffffff, %eax

After:

 # perf script --itrace=xe -F+flags,+insn,-period --xed --ns
          xabort  1478 [007] 92161.431348581:   transactions:   x                              400b81 main+0x14 (/root/xabort)          xbegin 0x6
          xabort  1478 [007] 92161.431348624:   transactions:   tx abrt                        400b93 main+0x26 (/root/xabort)          xabort $0x1

Fixes: faaa87680b ("perf intel-pt/bts: Report instruction bytes and length in sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:33:43 -03:00
Axel Lin
687c9e3b1a
regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap
Return -EINVAL if ramp_delay_table is NULL.
Also add WARN_ON since the driver code needs fix if this happened.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210519132255.1683863-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:31:43 +01:00
Adrian Hunter
cb7987837c perf intel-pt: Fix transaction abort handling
When adding support for power events, some handling of FUP packets was
unified. That resulted in breaking reporting of TSX aborts, by not
considering the associated TIP packet. Fix that.

Example:

A machine that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.

 # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
 rtm

Test program:

 #include <stdio.h>
 #include <immintrin.h>

 int main()
 {
        int x = 0;

        if (_xbegin() == _XBEGIN_STARTED) {
                x = 1;
                _xabort(1);
        } else {
                printf("x = %d\n", x);
        }
        return 0;
 }

Compile with -mrtm i.e.

 gcc -Wall -Wextra -mrtm xabort.c -o xabort

Record:

 perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort

Before:

 # perf script --itrace=be -F+flags,+addr,-period,-event --ns
          xabort  1478 [007] 92161.431348552:   tr strt                             0 [unknown] ([unknown]) =>           400b6d main+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   jmp                            400b96 main+0x29 (/root/xabort) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   return                         400bb4 main+0x47 (/root/xabort) =>           400b87 main+0x1a (/root/xabort)
          xabort  1478 [007] 92161.431348637:   jcc                            400b8a main+0x1d (/root/xabort) =>           400b98 main+0x2b (/root/xabort)
          xabort  1478 [007] 92161.431348644:   tr end  call                   400ba9 main+0x3c (/root/xabort) =>           40f690 printf+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431360859:   tr strt                             0 [unknown] ([unknown]) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431360882:   tr end  return                 400bb4 main+0x47 (/root/xabort) =>           401139 __libc_start_main+0x309 (/root/xabort)

After:

 # perf script --itrace=be -F+flags,+addr,-period,-event --ns
          xabort  1478 [007] 92161.431348552:   tr strt                             0 [unknown] ([unknown]) =>           400b6d main+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   tx abrt                        400b93 main+0x26 (/root/xabort) =>           400b87 main+0x1a (/root/xabort)
          xabort  1478 [007] 92161.431348637:   jcc                            400b8a main+0x1d (/root/xabort) =>           400b98 main+0x2b (/root/xabort)
          xabort  1478 [007] 92161.431348644:   tr end  call                   400ba9 main+0x3c (/root/xabort) =>           40f690 printf+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431360859:   tr strt                             0 [unknown] ([unknown]) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431360882:   tr end  return                 400bb4 main+0x47 (/root/xabort) =>           401139 __libc_start_main+0x309 (/root/xabort)

Fixes: a472e65fc4 ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:31:04 -03:00
Thomas Richter
316a76a58c perf test: Fix libpfm4 support (63) test error for nested event groups
Compiling perf with make LIBPFM4=1 includes libpfm support and
enables test case 63 'Test libpfm4 support'. This test reports an error
on all platforms for subtest 63.2 'test groups of --pfm-events'.
The reported error message is 'nested event groups not supported'

 # ./perf test -F 63
 63: Test libpfm4 support                                            :
 63.1: test of individual --pfm-events                               :
 Error:
 failed to parse event stereolab : event not found
 Error:
 failed to parse event stereolab,instructions : event not found
 Error:
 failed to parse event instructions,stereolab : event not found
  Ok
 63.2: test groups of --pfm-events                                   :
 Error:
 nested event groups not supported    <------ Error message here
 Error:
 failed to parse event {stereolab} : event not found
 Error:
 failed to parse event {instructions,cycles},{instructions,stereolab} :\
	 event not found
 Ok
 #

This patch addresses the error message 'nested event groups not supported'.
The root cause is function parse_libpfm_events_option() which parses the
event string '{},{instructions}' and can not handle a leading empty
group notation '{},...'.

The code detects the first (empty) group indicator '{' but does not
terminate group processing on the following group closing character '}'.
So when the second group indicator '{' is detected, the code assumes
a nested group and returns an error.

With the error message fixed, also change the expected event number to
one for the test case to succeed.

While at it also fix a memory leak. In good case the function does not
free the duplicated string given as first parameter.

Output after:
 # ./perf test -F 63
 63: Test libpfm4 support                                            :
 63.1: test of individual --pfm-events                               :
 Error:
 failed to parse event stereolab : event not found
 Error:
 failed to parse event stereolab,instructions : event not found
 Error:
 failed to parse event instructions,stereolab : event not found
  Ok
 63.2: test groups of --pfm-events                                   :
 Error:
 failed to parse event {stereolab} : event not found
 Error:
 failed to parse event {instructions,cycles},{instructions,stereolab} : \
	 event not found
  Ok
 #
Error message 'nested event groups not supported' is gone.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Ian Rogers <irogers@google.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210517140931.2559364-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:30:37 -03:00
Daniel Borkmann
3d43167768 Merge branch 'bpf-loader-progs'
Alexei Starovoitov says:

====================
v5->v6:
- fixed issue found by bpf CI. The light skeleton generation was
  doing a dry-run of loading the program where all actual sys_bpf syscalls
  were replaced by calls into gen_loader. Turned out that search for valid
  vmlinux_btf was not stubbed out which was causing light skeleton gen
  to fail on older kernels.
- significantly reduced verbosity of gen_loader.c.
- an example trace_printk.lskel.h generated out of progs/trace_printk.c
  https://gist.github.com/4ast/774ea58f8286abac6aa8e3bf3bf3b903

v4->v5:
- addressed a bunch of minor comments from Andrii.
- the main difference is that lskel is now more robust in case of errors
  and a bit cleaner looking.

v3->v4:
- cleaned up closing of temporary FDs in case intermediate sys_bpf fails during
  execution of loader program.
- added support for rodata in the skeleton.
- enforce bpf_prog_type_syscall to be sleepable, since it needs bpf_copy_from_user
  to populate rodata map.
- converted test trace_printk to use lskel to test rodata access.
- various small bug fixes.

v2->v3: Addressed comments from Andrii and John.
- added support for setting max_entries after signature verification
  and used it in ringbuf test, since ringbuf's max_entries has to be updated
  after skeleton open() and before load(). See patch 20.
- bpf_btf_find_by_name_kind doesn't take btf_fd anymore.
  Because of that removed attach_prog_fd from bpf_prog_desc in lskel.
  Both features to be added later.
- cleaned up closing of fd==0 during loader gen by resetting fds back to -1.
- converted loader gen to use memset(&attr, cmd_specific_attr_size).
  would love to see this optimization in the rest of libbpf.
- fixed memory leak during loader_gen in case of enomem.
- support for fd_array kernel feature is added in patch 9 to have
  exhaustive testing across all selftests and then partially reverted
  in patch 15 to keep old style map_fd patching tested as well.
- since fentry_test/fexit_tests were extended with re-attach had to add
  support for per-program attach method in lskel and use it in the tests.
- cleanup closing of fds in lskel in case of partial failures.
- fixed numerous small nits.

v1->v2: Addressed comments from Al, Yonghong and Andrii.
- documented sys_close fdget/fdput requirement and non-recursion check.
- reduced internal api leaks between libbpf and bpftool.
  Now bpf_object__gen_loader() is the only new libbf api with minimal fields.
- fixed light skeleton __destroy() method to munmap and close maps and progs.
- refactored bpf_btf_find_by_name_kind to return btf_id | (btf_obj_fd << 32).
- refactored use of bpf_btf_find_by_name_kind from loader prog.
- moved auto-gen like code into skel_internal.h that is used by *.lskel.h
  It has minimal static inline bpf_load_and_run() method used by lskel.
- added lksel.h example in patch 15.
- replaced union bpf_map_prog_desc with struct bpf_map_desc and struct bpf_prog_desc.
- removed mark_feat_supported and added a patch to pass 'obj' into kernel_supports.
- added proper tracking of temporary FDs in loader prog and their cleanup via bpf_sys_close.
- rename gen_trace.c into gen_loader.c to better align the naming throughout.
- expanded number of available helpers in new prog type.
- added support for raw_tp attaching in lskel.
  lskel supports tracing and raw_tp progs now.
  It correctly loads all networking prog types too, but __attach() method is tbd.
- converted progs/test_ksyms_module.c to lskel.
- minor feedback fixes all over.

The description of V1 set is still valid:

This is a first step towards signed bpf programs and the third approach of that kind.
The first approach was to bring libbpf into the kernel as a user-mode-driver.
The second approach was to invent a new file format and let kernel execute
that format as a sequence of syscalls that create maps and load programs.
This third approach is using new type of bpf program instead of inventing file format.
1st and 2nd approaches had too many downsides comparing to this 3rd and were discarded
after months of work.

To make it work the following new concepts are introduced:
1. syscall bpf program type
A kind of bpf program that can do sys_bpf and sys_close syscalls.
It can only execute in user context.

2. FD array or FD index.
Traditionally BPF instructions are patched with FDs.
What it means that maps has to be created first and then instructions modified
which breaks signature verification if the program is signed.
Instead of patching each instruction with FD patch it with an index into array of FDs.
That makes the program signature stable if it uses maps.

3. loader program that is generated as "strace of libbpf".
When libbpf is loading bpf_file.o it does a bunch of sys_bpf() syscalls to
load BTF, create maps, populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map and single bpf program that
does those syscalls.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.

4. light skeleton
Instead of embedding the whole elf file into skeleton and using libbpf
to parse it later generate a loader program and embed it into "light skeleton".
Such skeleton can load the same set of elf files, but it doesn't need
libbpf and libelf to do that. It only needs few sys_bpf wrappers.

Future steps:
- support CO-RE in the kernel. This patch set is already too big,
  so that critical feature is left for the next step.
- generate light skeleton in golang to allow such users use BTF and
  all other features provided by libbpf
- generate light skeleton for kernel, so that bpf programs can be embeded
  in the kernel module. The UMD usage in bpf_preload will be replaced with
  such skeleton, so bpf_preload would become a standard kernel module
  without user space dependency.
- finally do the signing of the loader program.

The patches are work in progress with few rough edges.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-05-19 15:27:42 +02:00
Liming Sun
1c0e5701c5 platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.

Fixes: 1357dfd726 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
9795d8232a platform/surface: dtx: Fix poll function
The poll function should not return -ERESTARTSYS.

Furthermore, locking in this function is completely unnecessary. The
ddev->lock protects access to the main device and controller (ddev->dev
and ddev->ctrl), ensuring that both are and remain valid while being
accessed by clients. Both are, however, never accessed in the poll
function. The shutdown test (via atomic bit flags) be safely done
without locking, so drop locking here entirely.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1d60999283 ("platform/surface: Add DTX driver)
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210513134437.2431022-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
773fe1d744 platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
The Surface System Aggregator Module driver entry is currently missing a
mailing list. Surface platform drivers are discussed on the
platform-driver-x86 list and all other Surface platform drivers have a
reference to that list in their entries. So let's add one here as well.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210514221954.5976-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Arnd Bergmann
ba6e1d8422 platform/surface: aggregator: avoid clang -Wconstant-conversion warning
Clang complains about the assignment of SSAM_ANY_IID to
ssam_device_uid->instance:

drivers/platform/surface/surface_aggregator_registry.c:478:25: error: implicit conversion from 'int' to '__u8' (aka 'unsigned char') changes value from 65535 to 255 [-Werror,-Wconstant-conversion]
        { SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
        ~                      ^~~~~~~~~~~~
include/linux/surface_aggregator/device.h:71:23: note: expanded from macro 'SSAM_ANY_IID'
 #define SSAM_ANY_IID            0xffff
                                ^~~~~~
include/linux/surface_aggregator/device.h:126:63: note: expanded from macro 'SSAM_VDEV'
        SSAM_DEVICE(SSAM_DOMAIN_VIRTUAL, SSAM_VIRTUAL_TC_##cat, tid, iid, fun)
                                                                     ^~~
include/linux/surface_aggregator/device.h:102:41: note: expanded from macro 'SSAM_DEVICE'
        .instance = ((iid) != SSAM_ANY_IID) ? (iid) : 0,                        \
                                               ^~~

The assignment doesn't actually happen, but clang checks the type limits
before checking whether this assignment is reached. Replace the ?:
operator with a __builtin_choose_expr() invocation that avoids the
warning for the untaken part.

Fixes: eb0e90a820 ("platform/surface: aggregator: Add dedicated bus and device type")
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210514200453.1542978-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
647e6cc979 platform/surface: aggregator: Do not mark interrupt as shared
Having both IRQF_NO_AUTOEN and IRQF_SHARED set causes
request_threaded_irq() to return with -EINVAL (see comment in flag
validation in that function). As the interrupt is currently not shared
between multiple devices, drop the IRQF_SHARED flag.

Fixes: 507cf5a2f1 ("platform/surface: aggregator: move to use request_irq by IRQF_NO_AUTOEN flag")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210505133635.1499703-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Axel Lin
79c7e1447c
regulator: fan53555: Cleanup unused define and redundant assignment
TCS_VSEL_NSEL_MASK is not used so remove it.
Also remove redundant assignment for di->slew_reg.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:12 +01:00
Axel Lin
a7f003147b
regulator: fan53555: Fix slew_shift setting for tcs4525
Fix trivial copy-paste mistake.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:11 +01:00
Sander Vanheule
1f89d2fe16
regmap: Add MDIO bus support
Basic support for MDIO bus access. Support only includes clause-22
register access, with 5-bit addresses, and 16-bit wide registers.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/63b99a2fec2c4ea3c461d59d451af8d675ecf312.1621279162.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:10 +01:00
Gyeongtaek Lee
8b4ba1d317
ASoC: soc-dai: fix up hw params only if it is needed
If fixed hw params won't be used, fixing up isn't needed also.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/000401d748bc$fa466d50$eed347f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:08 +01:00
Rafał Miłecki
11480dbfe1
ASoC: wm8750: convert to the json-schema
This helps validating DTS files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210512205926.780-1-zajec5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:07 +01:00
Neil Armstrong
7487238c5f
ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC
This adds support for the TOACODEC found in Amlogic SM1 SoCs.

The bits are shifted for more selection of clock sources, so this only
maps the same support for G12A to the SM1 bits.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-3-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:05 +01:00
Neil Armstrong
172dd9216d
ASoC: meson: g12a-toacodec: use regmap fields to prepare SM1 support
Switch usage to regmap field for bits handled by the g12a_toacodec_mux_put_enum()
function to avoid uselesss code duplication when adding SM1 variant support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:04 +01:00