Alderlake P have modular FIA like TGL but it is always modular in all
skus, not like TGL that we had to read a register to check if it is
monolithic or modular.
BSpec: 55480
BSpec: 50572
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-11-matthew.d.roper@intel.com
When DP_PHY_MODE_STATUS_NOT_SAFE is set, it means that display
has the control over the TC phy.
The "not safe" naming is confusing using ownership make it easier
to read also future platforms will have a new register that does the
same job as DP_PHY_MODE_STATUS_NOT_SAFE but with the onwership name.
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-10-matthew.d.roper@intel.com
ADL-P has 3 possible refclk frequencies: 19.2MHz,
24MHz and 38.4MHz
While we're at it, remove the drm_WARNs. They've never actually helped
us catch any problems, but it's very easy to forget to update them
properly for new platforms.
BSpec: 55409, 49208
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-9-matthew.d.roper@intel.com
ADL-P further extends the bits in PLANE_WM that represent blocks and
lines; we need to extend our masks accordingly. Since these bits are
reserved and MBZ on earlier platforms, it's safe to use the larger
bitmask on all platforms.
Bspec: 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-8-matthew.d.roper@intel.com
Support compression BPPs from bpc to uncompressed BPP -1.
So far we have 8,10,12 as valid compressed BPPS now the
support is extended.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-5-matthew.d.roper@intel.com
Move the platform specific max bpc calculation into
intel_dp_dsc_compute_bpp function
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-4-matthew.d.roper@intel.com
XE_LPD continues to use the same "skylake-style" watermark
programming as other recent platforms. The only change to the watermark
calculations compared to Display12 is that XE_LPD now allows a
maximum of 255 lines vs the old limit of 31.
Due to the larger possible lines value, the corresponding bits
representing the value in PLANE_WM are also extended, so make sure we
read/write enough bits. Let's also take this opportunity to switch over
to the REG_FIELD notation.
Bspec: 49325
Bspec: 50419
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-3-matthew.d.roper@intel.com
The DDI naming template for display version 12 went A-C, TC1-TC6. With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.
The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously. The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.
For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value. However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth). We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.
v2:
- Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose)
v3:
- Add hpd_pin to handle outputs D and E (Jose)
- Fixed conversion of BIOS port to aux ch for TC ports (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-2-matthew.d.roper@intel.com
iomap_max_page_shift is expected to contain a page shift, so it can't be a
'bool', has to be an 'unsigned int'
And fix the default values: P4D_SHIFT is when huge iomap is allowed.
However, on some architectures (eg: powerpc book3s/64), P4D_SHIFT is not a
constant so it can't be used to initialise a static variable. So,
initialise iomap_max_page_shift with a maximum shift supported by the
architecture, it is gated by P4D_SHIFT in vmap_try_huge_p4d() anyway.
Link: https://lkml.kernel.org/r/ad2d366015794a9f21320dcbdd0a8eb98979e9df.1620898113.git.christophe.leroy@csgroup.eu
Fixes: bbc180a5ad ("mm: HUGE_VMAP arch support cleanup")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I added CONFIG_MODPROBE_PATH, I neglected to update Documentation/.
It's still true that this defaults to /sbin/modprobe, but now via a level
of indirection. So document that the kernel might have been built with
something other than /sbin/modprobe as the initial value.
Link: https://lkml.kernel.org/r/20210420125324.1246826-1-linux@rasmusvillemoes.dk
Fixes: 17652f4240 ("modules: add CONFIG_MODPROBE_PATH")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I believe there are some issues introduced by commit 31651c6071
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
Link: https://lkml.kernel.org/r/20210429165139.3082828-1-jouni.roivas@tuxera.com
Fixes: 31651c6071 ("hfsplus: avoid deadlock on file truncation")
Signed-off-by: Jouni Roivas <jouni.roivas@tuxera.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A readahead request will not allocate more memory than can be represented
by a size_t, even on systems that have HIGHMEM available. Change the
length functions from returning an loff_t to a size_t.
Link: https://lkml.kernel.org/r/20210510201201.1558972-1-willy@infradead.org
Fixes: 32c0a6bcaa ("btrfs: add and use readahead_batch_length")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
Link: https://lkml.kernel.org/r/20210507025915.1464056-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9
Signed-off-by: Peter Collingbourne <pcc@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org
Fixes: c25fff7171 ("mm: add dma_addr_t to struct page")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Matteo Croce <mcroce@linux.microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 3e96b6a2e9. General
Protection Fault in rmap_walk_ksm() under memory pressure:
remove_rmap_item_from_tree() needs to take page lock, of course.
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2105092253500.1127@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Link: https://lkml.kernel.org/r/20210428230858.348400-1-axelrasmussen@google.com
Fixes: cb658a453b ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Link: https://lkml.kernel.org/r/20210507152618.9447-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+e8f781243ce16ac2f962@syzkaller.appspotmail.com>
Reported-by: <syzbot+7b98870d4fec9447b951@syzkaller.appspotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Splitting an earlier version of a patch that allowed calling
__request_region() while holding the resource lock into a series of
patches required changing the return code for the newly introduced
__request_region_locked().
Unfortunately this change was not carried through to a subsequent commit
56fd94919b ("kernel/resource: fix locking in request_free_mem_region")
in the series. This resulted in a use-after-free due to freeing the
struct resource without properly releasing it. Fix this by correcting the
return code check so that the struct is not freed if the request to add it
was successful.
Link: https://lkml.kernel.org/r/20210512073528.22334-1-apopple@nvidia.com
Fixes: 56fd94919b ("kernel/resource: fix locking in request_free_mem_region")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <smuchun@gmail.com>
Cc: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul E. McKenney reported [1] that commit 1f0723a4c0 ("mm, slub: enable
slub_debug static key when creating cache with explicit debug flags")
results in the lockdep complaint:
======================================================
WARNING: possible circular locking dependency detected
5.12.0+ #15 Not tainted
------------------------------------------------------
rcu_torture_sta/109 is trying to acquire lock:
ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20
but task is already holding lock:
ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (slab_mutex){+.+.}-{3:3}:
lock_acquire+0xb9/0x3a0
__mutex_lock+0x8d/0x920
slub_cpu_dead+0x15/0xf0
cpuhp_invoke_callback+0x17a/0x7c0
cpuhp_invoke_callback_range+0x3b/0x80
_cpu_down+0xdf/0x2a0
cpu_down+0x2c/0x50
device_offline+0x82/0xb0
remove_cpu+0x1a/0x30
torture_offline+0x80/0x140
torture_onoff+0x147/0x260
kthread+0x10a/0x140
ret_from_fork+0x22/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
check_prev_add+0x8f/0xbf0
__lock_acquire+0x13f0/0x1d80
lock_acquire+0xb9/0x3a0
cpus_read_lock+0x21/0xa0
static_key_enable+0x9/0x20
__kmem_cache_create+0x38d/0x430
kmem_cache_create_usercopy+0x146/0x250
kmem_cache_create+0xd/0x10
rcu_torture_stats+0x79/0x280
kthread+0x10a/0x140
ret_from_fork+0x22/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(slab_mutex);
lock(cpu_hotplug_lock);
lock(slab_mutex);
lock(cpu_hotplug_lock);
*** DEADLOCK ***
1 lock held by rcu_torture_sta/109:
#0: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
stack backtrace:
CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
dump_stack+0x6d/0x89
check_noncircular+0xfe/0x110
? lock_is_held_type+0x98/0x110
check_prev_add+0x8f/0xbf0
__lock_acquire+0x13f0/0x1d80
lock_acquire+0xb9/0x3a0
? static_key_enable+0x9/0x20
? mark_held_locks+0x49/0x70
cpus_read_lock+0x21/0xa0
? static_key_enable+0x9/0x20
static_key_enable+0x9/0x20
__kmem_cache_create+0x38d/0x430
kmem_cache_create_usercopy+0x146/0x250
? rcu_torture_stats_print+0xd0/0xd0
kmem_cache_create+0xd/0x10
rcu_torture_stats+0x79/0x280
? rcu_torture_stats_print+0xd0/0xd0
kthread+0x10a/0x140
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
This is because there's one order of locking from the hotplug callbacks:
lock(cpu_hotplug_lock); // from hotplug machinery itself
lock(slab_mutex); // in e.g. slab_mem_going_offline_callback()
And commit 1f0723a4c0 made the reverse sequence possible:
lock(slab_mutex); // in kmem_cache_create_usercopy()
lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable()
The simplest fix is to move static_key_enable() to a place before slab_mutex is
taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not
ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it
at least self-contained and obvious.
[1] https://lore.kernel.org/lkml/20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/
Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz
Fixes: 1f0723a4c0 ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get()
upper but overlooked a side effect that the huge_ptep_get() will fetch the
pte after wr-protection. After moving it upwards, we need explicit
wr-protect of child pte or we will keep the write bit set in the child
process, which could cause data corrution where the child can write to the
original page directly.
This issue can also be exposed by "memfd_test hugetlbfs" kselftest.
Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com
Fixes: 4eae4efa2c ("hugetlb: do early cow when page pinned on src mm")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
$ ./memfd_test hugetlbfs
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
mmap() didn't fail as expected
Aborted (core dumped)
I think it's probably because no one is really running the hugetlbfs test.
Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we
do in shmem_mmap(). Generalize a helper for that.
Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com
Fixes: ab3948f58f ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure, which is not the case here.
The NULL checks are therefore unnecessary and misleading. Remove them.
The changes in this patch were made automatically using the following
Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Link: https://lore.kernel.org/r/20210510041211.2051325-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The structure pointer passed to container_of() is never NULL; that was
already checked. That means that the result of container_of() operations
on it is also never NULL, even though se_node_acl is the first element
of the structure embedding it. On top of that, it is misleading to perform
a NULL check on the result of container_of() because the position of the
contained element could change, which would make the test invalid.
Remove the unnecessary NULL check.
As it turns out, the container_of operation was only made for the purpose
of the NULL check. If the container_of is actually needed, it is repeated
later. Remove the container_of operation as well.
The NULL check was identified and removed with the following Coccinelle
script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Link: https://lore.kernel.org/r/20210510040817.2050266-1-linux@roeck-us.net
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hou Pu <houpu@bytedance.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of calling dma_unmap_sg() after completing WRITE I/O, call
dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer.
Link: https://lore.kernel.org/r/1618403949-3443-1-git-send-email-varun@chelsio.com
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.
The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.
Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.
In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().
Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org
Fixes: 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems. With this commit,
64-bit kernel will enumerate 8*15 non-existing disks. This is caused
by the broken CCB structure. The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB. This leads to incorrect response to INQUIRY
commands during enumeration.
Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.
Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As per spec, e.g. JESD220E chapter 7.2, while powering off the UFS device,
RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down
sequence after fixing:
Power down:
1. Assert RST_N low
2. Turn-off VCC
3. Turn-off VCCQ/VCCQ2
Link: https://lore.kernel.org/r/1620813706-25331-1-git-send-email-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new sysfs group which has nodes to monitor data/request transfer
performance. This sysfs group has nodes showing total sectors/requests
transferred, total busy time spent and max/min/avg/sum latencies. This
group can be enhanced later to show more UFS driver layer performance
statistics data during runtime.
Link: https://lore.kernel.org/r/1619058521-35307-2-git-send-email-cang@codeaurora.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While CXL Memory Device endpoints locate the CXL MMIO registers in a PCI
BAR, CXL root bridges have their MMIO base address described by platform
firmware. Refactor the existing register lookup into a generic facility
for endpoints and bridges to share.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972534.1865304.3218686216153688039.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for more generic shared functionality across endpoint
consumers of core cxl resources, and platform-firmware producers of
those resources, rename bus.c to core.c. In addition to the central
rendezvous for interleave coordination, the core will also define common
routines like CXL register block mapping.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972018.1865304.11079951161445408423.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL MMIO register blocks are organized by device type and capabilities.
There are Component registers, Device registers (yes, an ambiguous
name), and Memory Device registers (a specific extension of Device
registers).
It is possible for a given device instance (endpoint or port) to
implement register sets from multiple of the above categories.
The driver code that enumerates and maps the registers is type specific
so it is useful to have a dedicated type and helpers for each block
type.
At the same time, once the registers are mapped the origin type does not
matter. It is overly pedantic to reference the register block type in
code that is using the registers.
In preparation for the endpoint driver to incorporate Component registers
into its MMIO operations reorganize the registers to allow typed
enumeration + mapping, but anonymous usage. With the end state of
'struct cxl_regs' to be:
struct cxl_regs {
union {
struct {
CXL_DEVICE_REGS();
};
struct cxl_device_regs device_regs;
};
union {
struct {
CXL_COMPONENT_REGS();
};
struct cxl_component_regs component_regs;
};
};
With this arrangement the driver can share component init code with
ports, but when using the registers it can directly reference the
component register block type by name without the 'component_regs'
prefix.
So, map + enumerate can be shared across drivers of different CXL
classes e.g.:
void cxl_setup_device_regs(struct device *dev, void __iomem *base,
struct cxl_device_regs *regs);
void cxl_setup_component_regs(struct device *dev, void __iomem *base,
struct cxl_component_regs *regs);
...while inline usage in the driver need not indicate where the
registers came from:
readl(cxlm->regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.hdm + HDM_OFFSET);
...instead of:
readl(cxlm->regs.device_regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.component_regs.hdm + HDM_OFFSET);
This complexity of the definition in .h yields improvement in code
readability in .c while maintaining type-safety for organization of
setup code. It prepares the implementation to maintain organization in
the face of CXL devices that compose register interfaces consisting of
multiple types.
Given that this new container is named 'regs' rename the common register
base pointer @base, and fixup the kernel-doc for the missing @cxlmd
description.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/162096971451.1865304.13540251513463515153.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for sharing cxl.h with other generic CXL consumers,
move / consolidate some of the memory device specifics to mem.h.
The motivation for moving out of cxl.h is to maintain least privilege
access to memory-device details since cxl.h is used in multiple files.
The motivation for moving definitions into a new mem.h header is for
code readability and organization. I.e. minimize implementation details
when reading data structures and other definitions.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096970932.1865304.14510894426562947262.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Detect use of static entry-point BPF programs (those with SEC() markings) and
emit error message. This is similar to
c1cccec9c6 ("libbpf: Reject static maps") but for BPF programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210514195534.1440970-1-andrii@kernel.org
With the use of the qca8k dsa driver, some problem arised related to
port status detection. With a load on a specific port (for example a
simple speed test), the driver starts to behave in a strange way and
garbage data is produced. To address this, enlarge the sleep delay and
address a bug for the reg offset 31 that require additional delay for
this specific reg.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mdio drivers should not use REGCHACHE. Also disable locking since it's
handled by the mdio users and regmap is always accessed atomically.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix mixed whitespace and tab for define spacing.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith says:
====================
Multiple improvement to qca8k stability
Currently qca8337 switch are widely used on ipq8064 based router.
On these particular router it was notice a very unstable switch with
port not link detected as link with unknown speed, port dropping
randomly and general unreliability. Lots of testing and comparison
between this dsa driver and the original qsdk driver showed lack of some
additional delay and values. A main difference arised from the original
driver and the dsa one. The original driver didn't use MASTER regs to
read phy status and the dedicated mdio driver worked correctly. Now that
the dsa driver actually use these regs, it was found that these special
read/write operation required mutual exclusion to normal
qca8k_read/write operation. The add of mutex for these operation fixed
the random port dropping and now only the actual linked port randomly
dropped. Adding additional delay for set_page operation and fixing a bug
in the mdio dedicated driver fixed also this problem. The current driver
requires also more time to apply vlan switch. All of these changes and
tweak permit a now very stable and reliable dsa driver and 0 port
dropping. This series is currently tested by at least 5 user with
different routers and all reports positive results and no problems.
Changes v6:
- Fix spelling mistake
- Change ms to ns (confirmed by datasheet)
Changes v5:
- Removed mdio patch (sent separetly to try to reduce the series)
I know it was asked to reduced this series since it big, but rework
the new changes to skip and error check looks wrong. Since half of them
are actually already reviewed I think it's better to keep this series as is.
- Improve rgmii configurable patch
- Move qca8k phy dedicated driver to at803x phy driver
- Add support for dedicated internal mdio driver for qca8k
Changes v4:
- Use iopoll for busy_wait function
- Better describe and split some confusing commits
- Fix bad rgmii delay configurable patch
- Drop phy generic patch to pass flags with phylink_connect_phy
- Add dsa2 patch to declare mdio node in the switch node
- Add dsa patch to permit dsa driver to declare custom get_phys_mii_mask
Some background about the last 2 patch.
The qca8k switch doesn't have a 1:1 map between port reg and phy reg.
Currently it's used a function to convert port to the internal phy reg.
I added some patch to fix this.
- The dsa driver now check if the mdio node is present and use the of variant
of the mdiobus_register
- A custom phy_mii_mask is required as currently the mask is generated from
the port reg, but in our case the mask would be different as it should be
generated from the phy reg. To generalize this I added an extra function
that driver can provide to pass custom phy_mii_mask.
Changes v3:
- Revert mdio writel changes (use regmap with REGCACHE disabled)
- Split propagate error patch to 4 different patch
Changes v2:
- Implemented phy driver for internal PHYs
I'm testing cable test functions as I found some documentation that
actually declare regs about it. Problem is that it doesn't actually
work. It seems that the value set are ignored by the phy.
- Made the rgmii delay configurable
- Reordered patch
- Split mdio patches to more specific ones
- Reworked mdio driver to use readl/writel instead of regmap
- Reworked the entire driver to make it aware of any read/write error.
- Added phy generic patch to pass flags with phylink_connect_phy
function
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the at803x share the same regs, it's assumed they are based on the
same implementation. Make it part of the at803x PHY driver to skip
having redudant code.
Add initial support for qca8k internal PHYs. The internal PHYs requires
special mmd and debug values to be set based on the switch revision
passwd using the dev_flags. Supports output of idle, receive and eee_wake
errors stats.
Some debug values sets can't be translated as the documentation lacks any
reference about them.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean any whitespace errors and fix not aligned define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define get_phy_flags to pass switch_Revision needed to tweak the
internal PHY with debug values based on the revision.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve the internal mdio read/write bus access by caching the value
without accessing it for every read/write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document new way of declare mapping of internal PHY to port.
The new implementation directly declare the PHY connected to the port
by adding a node in the switch node. The driver detect this and register
an internal mdiobus using the mapping defined in the mdio node.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to setup_mdio_bus for internal phy declaration. Introduce a
flag to use the legacy port phy mapping by default and use the direct
mapping if a mdio node is detected in the switch node. Register a
dedicated mdio internal mdio bus to address the different mapping
between port and phy if the mdio node is detected.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The witch require some extra delay after setting page or the next
read/write can use still use the old page. Add a delay after the
set_page function to address this as it's done in QSDK legacy driver.
Some timeouts were notice with VLAN and phy function, enlarge the
mdio busy wait timeout to fix these problems.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MDIO_MASTER operation have a dedicated busy wait that is not protected
by the mdio mutex. This can cause situation where the MASTER operation
is done and a normal operation is executed between the MASTER read/write
and the MASTER busy_wait. Rework the qca8k_mdio_read/write function to
address this issue by binding the lock for the whole MASTER operation
and not only the mdio read/write common operation.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clear MDIO_MASTER_EN bit from MDIO_MASTER_CTRL after read/write
operation. The MDIO_MASTER_EN bit is not reset after read/write
operation and the next operation can be wrongly interpreted by the
switch as a mdio operation. This cause a production of wrong/garbage
data from the switch and underfined bheavior. (random port drop,
unplugged port flagged with link up, wrong port speed)
Also on driver remove the MASTER_CTRL can be left set and cause the
malfunction of any next driver using the mdio device.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>