Commit graph

1,044,825 commits

Author SHA1 Message Date
Tian Tao
ca40daf39d gpio: omap: Use device_get_match_data() helper
Use the device_get_match_data() helper instead of open coding.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:40 +02:00
Sander Vanheule
0d82fb1127 gpio: Add Realtek Otto GPIO support
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.

Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).

Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).

Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:40 +02:00
Sander Vanheule
951f7da9f6 dt-bindings: gpio: Binding for Realtek Otto GPIO
Add a binding description for Realtek's GPIO controller found on several
of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
RTL839x series of switch SoCs.

A fallback binding 'realtek,otto-gpio' is provided for cases where the
actual port ordering is not known yet, and enabling the interrupt
controller may result in uncaught interrupts.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:40 +02:00
Alexander Dahl
6984a32034 docs: kernel-parameters: Add gpio_mockup_named_lines
Missing since introduced in the driver.

Fixes: 8a68ea00a6 ("gpio: mockup: implement naming the lines")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:39 +02:00
Alexander Dahl
3eb52226de docs: kernel-parameters: Move gpio-mockup for alphabetic order
All other sections are ordered alphabetically so do the same for
gpio-mockup.

Fixes: 0f98dd1b27 ("gpio/mockup: add virtual gpio device")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-05-05 16:07:39 +02:00
Bartosz Golaszewski
e829c2e474 lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
Provide managed variants of bitmap_alloc() and bitmap_zalloc().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-05-05 16:07:39 +02:00
Bartosz Golaszewski
c13656b904 lib: bitmap: order includes alphabetically
For better readability and maintenance: order the includes in bitmap
source files alphabetically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-05-05 16:07:39 +02:00
Bartosz Golaszewski
98635b29a7 lib: bitmap: remove the 'extern' keyword from function declarations
The 'extern' keyword doesn't have any benefits for functions in header
files. Remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-05-05 16:07:39 +02:00
Anirudh Rayabharam
6be388f4a3 HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.

To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().

Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 15:52:34 +02:00
Imre Deak
703cd9ae0d drm/i915/tgl+: Add the missing MC CCS/XYUV8888 format support
Make sure that the XYUV8888 format is handled correctly when it's used
with a MC_CCS modifier framebuffer. Besides this format not working, the
driver will also return an incorrect error value when trying to use it,
indicating that the second color plane in the framebuffer is set
unexpectedly.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210501002853.4132009-1-imre.deak@intel.com
2021-05-05 16:52:24 +03:00
Shuming Fan
682ae59ca2
ASoC: rt711-sdca: fix the function number of SDCA control for feature unit 0x1E
The function number should be FUNC_NUM_MIC_ARRAY(0x2) for the feature unit 0x1E.

Fixes: ca5118c0c0 ('ASoC: rt711-sdca: change capture switch controls')
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210504100424.8760-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-05 14:15:07 +01:00
Mark Bolhuis
48e33befe6 HID: Add BUS_VIRTUAL to hid_connect logging
Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>

Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 15:09:09 +02:00
Ahelenia Ziemiańska
eb134536cf HID: input: replace outdated HID numbers+comments with macros
These were untouched since 2.3.99-pre3, and the explanatory comment for
HID_DG_TIPPRESSURE is TipPressure in other places

Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 15:07:35 +02:00
Ahelenia Ziemiańska
bc8b796f61 HID: multitouch: set Stylus suffix for Stylus-application devices, too
This re-adds the suffix to Win8 stylus-on-touchscreen devices,
now that they aren't erroneously marked as MT

Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 15:06:44 +02:00
Ahelenia Ziemiańska
a2353e3b26 HID: multitouch: require Finger field to mark Win8 reports as MT
This effectively changes collection_is_mt from
  contact ID in report->field
to
  (device is Win8 => collection is finger) && contact ID in report->field

Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly

Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 15:05:05 +02:00
Hamza Mahfooz
670a23111e HID: remove the unnecessary redefinition of a macro
USB_VENDOR_ID_CORSAIR is defined twice in the same file with the same
value.

Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:56:02 +02:00
Saeed Mirzamohammadi
3b25200768 HID: quirks: Add quirk for Lenovo optical mouse
The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:

[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0

This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.

Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:47:16 +02:00
Luke D Jones
c980512b45 HID: asus: filter G713/G733 key event to prevent shutdown
The G713 and G733 both emit an unexpected keycode on some key
presses such as Fn+Pause. The device in this case is emitting
two events on key down, and 3 on key up, the third key up event
is report ID 0x02 and is unfiltered, causing incorrect event.

This patch filters out the single problematic event.

Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:40:42 +02:00
Hans de Goede
b413c59ead HID: lg-g15 + ite: Add MODULE_AUTHOR
I noticed that the 2 HID drivers which I've written and maintain were
missing a MODULE_AUTHOR tag, add this so that people can easily figure
out who to email with questions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Hans de Goede
cbe5b6b6a7 HID: lg-g15: Add support for the Logitech Z-10 speakers
Add support to hid-lg-g15 for the Logitech Z-10 speakers. This adds
support for the LCD menu keys found on these speakers, as well as
support for controlling the LCD's brightness through a LED classdev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Hans de Goede
1e5c22983f HID: lg-g15: Make the LED-name used by lg_g15_register_led() a parameter
Make the LED-name used by lg_g15_register_led() a parameter.

This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Hans de Goede
614d34f8b3 HID: lg-g15: Add a lg_g15_init_input_dev() helper function
Factor the input-device setup + KEY_KBD_LCD_MENU capability setting out
of lg_g15_probe() into a new lg_g15_init_input_dev() helper function.

This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Hans de Goede
ba3e054e7a HID: lg-g15: Add a lg_g15_handle_lcd_menu_keys() helper function
Factor out the handling of the G15 LCD menu keys out of
lg_g15_event() into a new lg_g15_handle_lcd_menu_keys() helper function.

This is a preparation patch for adding support for the LCD menu
keys on the Logitech Z-10 speakers (with LCD) which use the same
funky HID report format.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Hans de Goede
042d05b2e3 HID: lg-g15: Remove unused size argument from lg_*_event() functions
The report-size is already checked in lg_g15_raw_event() before calling
the lg_*_event() functions and these functions don't use the passed
in size at all, drop the unused parameter.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:39:24 +02:00
Srinivas Pandruvada
edb032033d HID: hid-sensor-hub: Return error for hid_set_field() failure
In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:36:18 +02:00
Ikjoon Jang
8dcaa046bf HID: google: Add of_match table to Whiskers switch device.
Add a device tree match table for "cros-cbas" switch device.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:34:41 +02:00
Michael Zaidman
b45ef5db7b HID: ft260: check data size in ft260_smbus_write()
The SMbus block transaction limits the number of bytes transferred to 32,
but nothing prevents a user from specifying via ioctl a larger data size
than the ft260 can handle in a single transfer.

i2cdev_ioctl_smbus()
   --> i2c_smbus_xfer
       --> __i2c_smbus_xfer
           --> ft260_smbus_xfer
               --> ft260_smbus_write

This patch adds data size checking in the ft260_smbus_write().

Fixes: 98189a0adfa0 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:32:46 +02:00
Maximilian Luz
b0d713c60c HID: surface-hid: Fix integer endian conversion
We want to convert from 16 bit (unsigned) little endian values contained
in a packed struct to CPU native endian values here, not the other way
around. So replace cpu_to_le16() with get_unaligned_le16(), using the
latter instead of le16_to_cpu() to acknowledge that we are reading from
a packed struct.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: b05ff1002a ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:31:55 +02:00
Dmitry Torokhov
0f0fb3d27e HID: hid-debug: recognize KEY_ASSISTANT and KEY_KBD_LAYOUT_NEXT
Add missing descriptions for KEY_ASSISTANT and KEY_KBD_LAYOUT_NEXT.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:31:05 +02:00
Dmitry Torokhov
7b229b13d7 HID: hid-input: add mapping for emoji picker key
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.

This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:31:05 +02:00
Mateusz Jończyk
9858c74c29 HID: a4tech: use A4_2WHEEL_MOUSE_HACK_B8 for A4TECH NB-95
This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.

In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.

The name "A4TECH" is spelled in all capitals on the company website.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:29:13 +02:00
Hans de Goede
7383354ad5 HID: logitech-dj/hidpp: Add info/warn/err messages about 27 MHz keyboard encryption
By default 27 MHz Logitech keyboards send the keypresses to the receiver
in plain text. Logitech's Windows "Keyboard and Mouse settings" tool allows
configuring encryption for the keyboard wireless link.

Now there also is a Linux tool for setting this up:
https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup

Once a keyboard is paired in encrypted mode, it will no longer work with
any receiver other then the receiver it was paired with.
If a user accidentally tries to pair another keyboard with the receiver
with which a keyboard has been paired in encrypted mode, then the receiver
looses the encryption key and the originally paired keyboard will no longer
work with either that receiver, or another receiver until the keyboard's
encryption key is rewritten by another encrypted mode pairing using the
tool. Or until it is reset by following a special reset procedure.

This commit adds 3 new log messages related to 27 MHz keyboard link
encryption to the Logitech dj / hidpp drivers:

1. An info level message when keyboard encryption is being used
2. A warning message when keyboard encryption is not used
3. An error message when the encryption key has been lost and the
   keyboard will not work because of this

Messages 2. and 3. contain a link to the userspace tool to setup the
encryption. The linked page also contains instructions to clear the key
(without needing the tool) to help a user recover from the keyboard not
working in case 3.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:28:12 +02:00
Hans de Goede
ed80bdc457 HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K15A keyboard-dock
Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.

Just like the K15A these errors are triggered by undocking and docking
the tablet.

There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:

1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while

These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:27:03 +02:00
Wei Yongjun
ed1ab6ff21 HID: thrustmaster: fix return value check in thrustmaster_probe()
Fix the return value check which testing the wrong variable
in thrustmaster_probe().

Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:26:38 +02:00
Nirenjan Krishnan
25bdbfbb2d HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for Saitek X65
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.

Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:25:34 +02:00
Dmitry Torokhov
f2145f8dc5 HID: do not use down_interruptible() when unbinding devices
Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:24:56 +02:00
Luke D Jones
4bfb2c72b2 HID: asus: Filter keyboard EC for old ROG keyboard
Older ROG keyboards emit a similar stream of bytes to the new
N-Key keyboards and require filtering to prevent a lot of
unmapped key warnings showing. As all the ROG keyboards use
QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering
in asus_raw_event.

Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:22:38 +02:00
Benjamin Moody
6a01268687 HID: semitek: new driver for GK6X series keyboards
A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.

There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version.  These
keyboards are sometimes known collectively as the "GK6X" series.

The keyboard has three USB interfaces.  Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys.  If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.

(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)

The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".)  The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.

Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-05-05 14:21:08 +02:00
Rijo Thomas
9f015b3765 tee: amdtee: unload TA only when its refcount becomes 0
Same Trusted Application (TA) can be loaded in multiple TEE contexts.

If it is a single instance TA, the TA should not get unloaded from AMD
Secure Processor, while it is still in use in another TEE context.

Therefore reference count TA and unload it when the count becomes zero.

Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-05-05 13:00:11 +02:00
Matthew Auld
c3b147604f drm/i915: drop the __i915_active_call pointer packing
We use some of the lower bits of the retire function pointer for
potential flags, which is quite thorny, since the caller needs to
remember to give the function the correct alignment with
__i915_active_call, otherwise we might incorrectly unpack the pointer
and jump to some garbage address later. Instead of all this let's just
pass the flags along as a separate parameter.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
References: ca419f407b ("drm/i915: Fix crash in auto_retire")
References: d8e44e4dd2 ("drm/i915/overlay: Fix active retire callback alignment")
References: fd5f262db1 ("drm/i915/selftests: Fix active retire callback alignment")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504164136.96456-1-matthew.auld@intel.com
2021-05-05 11:36:23 +01:00
Vitaly Kuznetsov
0a269a008f x86/kvm: Fix pr_info() for async PF setup/teardown
'pr_fmt' already has 'kvm-guest: ' so 'KVM' prefix is redundant.
"Unregister pv shared memory" is very ambiguous, it's hard to
say which particular PV feature it relates to.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-05 04:54:51 -04:00
Roy Sun
8744425411 drm/amdgpu: Add show_fdinfo() interface
Tracking devices, process info and fence info using
/proc/pid/fdinfo

Signed-off-by: David M Nieto <David.Nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-2-Roy.Sun@amd.com
2021-05-05 09:26:53 +02:00
Roy Sun
1774baa64f drm/scheduler: Change scheduled fence track v2
Update the timestamp of scheduled fence on HW
completion of the previous fences

This allow more accurate tracking of the fence
execution in HW

v2 (chk): drop the flag check and improve the comment

Signed-off-by: David M Nieto <david.nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-1-Roy.Sun@amd.com
2021-05-05 09:26:36 +02:00
Linus Torvalds
025768a966 x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
We used to generate this constant with static jumps, which certainly
works, but generates some quite unreadable and horrid code, and extra
jumps.

It's actually much simpler to just use our alternative_asm()
infrastructure to generate a simple alternative constant, making the
generated code much more obvious (and straight-line rather than "jump
around to load the right constant").

Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
2021-05-05 08:52:31 +02:00
Linus Torvalds
d665ea6ea8 This pull request contains the following changes for UML:
- Disable CONFIG_GCOV when built with modules
 - Many fixes for W=1 related warnings
 - Code cleanup
 
 Due to lack of time I was unable to prepare a bigger pull request.
 PR for the next merge window will contain more interesting material, I promise. :-)
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmCRqjcWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wRmdD/9bm7ob+9PxQ/weLPgMC97J+neq
 h34lxoQrxryDDv85uO5sGmg75BZ9TRC4NJUwEC9KuqsbPBDexbTiUyZQCI6p7CnZ
 frfIWsnnNfSWRHluMr26/fZZnUpbz4myw3BrplH266ULPmGomCQD27Nbg+BtVIgv
 2Na54B1IBVVQYi1kliirRC0+GC6JE4wifbDmqglweOMT7tiBfDbTrQP0s6Qez6jO
 9/yosugD9dsnyWzlwsLHe28Wlj3mlFDTHYAWcuYzR1B4RA60tjf5w0sYaVw862o1
 eq59B3aRH9v+KUkEOWa/85G91ZNRN/KO+CrLAsUDlicFelzFQwYGdWwLzMiXT++y
 D9joaRRDhoACO03M4kAPAoRFyUjn4k3/WD0HNUZYhWKSRaRzVffYH9caybmsLmlt
 mMXv8AQKBuZQP1EVaEPS8S1w4uprS1JTUks8YXNuD7r0/k3zPEiSGHL35JUns9BG
 N8XuPFz52NGffylGEt8wriOV7qbVJ7OUnAABGyQ8hUOuDKnObx/YpJTdOacmS6NP
 jXZrxV5Y1KDG1d4D9BcPbaouAw0+HPO02PuFBp8K3Uc19BZ+bo4/IpinjFXKLo9z
 3LaC2mw9r6Dfws35ksrvYZiRWrH7bVXqP+EJG+SvW6OBpNYg4/woRT7hbvc0IkxL
 2KTnQspgIQWVO5u4Hg==
 =xWpC
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml

Pull UML updates from Richard Weinberger:

 - Disable CONFIG_GCOV when built with modules

 - Many fixes for W=1 related warnings

 - Code cleanup

* tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix W=1 missing-include-dirs warnings
  um: elf.h: Fix W=1 warning for empty body in 'do' statement
  um: pgtable.h: Fix W=1 warning for empty body in 'do' statement
  um: Remove unused including <linux/version.h>
  um: Add 2 missing libs to fix various build errors
  um: Replace if (cond) BUG() with BUG_ON()
  um: Disable CONFIG_GCOV with MODULES
  um: Remove unneeded variable 'ret'
  um: Mark all kernel symbols as local
  um: Fix tag order in stub_32.h
2021-05-04 18:15:10 -07:00
Linus Torvalds
51f629446c This pull request contains changes for JFFS2, UBI and UBIFS
JFFS2:
 - Use splice_write()
 - Fix for a slab-out-of-bounds bug
 
 UBI:
 - Fix for clang related warnings
 - Code cleanup
 
 UBIFS:
 - Fix for inode rebirth at replay
 - Set s_uuid
 - Use zstd for default filesystem
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmCRqNcWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wcGbEACLv9Qm7N5z3CAG0aGC2LagEx4c
 u6fiL3EQx+wI82NKMG/KRdGeR3J18JA4xoM9FJ1ZLil9aUSvUjtLBq+wBRiKHnDn
 Oj4rgRVgwAMc1UdE00UAttCnorKXlsVWxg2+iD1CEZkkKbDN3dk7BkgtwJCjUmCy
 iD2oM02S0csLu0Uk400BaNFwOHG3AFVOU0xXeqyO2MgXcClEwfXNH8qmDQpZPmwy
 b42jd0FXxfWBnzPmrURZ163Yt/iXlNLFaHkMdJgJ23A+4eNWk5+BCjxMzj08u+mn
 XLIBGEegC/rHPYnBGqb/AhsQwoGxTqRTA0gmhkMX4j0goWpj7bO4+fwBu7DsOv/S
 kC09sobx+E8xIgoMPXwcr4twWBcbTctclZgoBRNa0BUILTVa6ifwdRxt0LlNmLLr
 wwZpRuekSBnKTEyD2c2rKnuCMZlg7f7dz6OXa+/HINy0YFvr2yFs0uF4RXpwaARz
 yR0iC80hrhGDrUA1+A2uIUZdNOI4ymR//9Of/9Qj+3o41Kl/0FpLPg8pH+CCLVTG
 iw2D3qJeX2N3VLdhb1ynQ5mLkzc3NWqEjf9bR1Aif3ti6FA5duueOctHhZTsC6Uq
 uzGQPXCpRqLbF1LoPtcmajUrgvl8tWIu9lVce5ncMA5D0q4VVc8t2yPFNdsBRyXl
 t5siLiHUdWIDvWQFmQ==
 =IwH7
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
 "JFFS2:
   - Use splice_write()
   - Fix for a slab-out-of-bounds bug

  UBI:
   - Fix for clang related warnings
   - Code cleanup

  UBIFS:
   - Fix for inode rebirth at replay
   - Set s_uuid
   - Use zstd for default filesystem"

* tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Remove unnecessary struct declaration
  jffs2: Hook up splice_write callback
  jffs2: avoid Wempty-body warnings
  jffs2: Fix kasan slab-out-of-bounds problem
  ubi: Fix fall-through warnings for Clang
  ubifs: Report max LEB count at mount time
  ubifs: Set s_uuid in super block to support ima/evm uuid options
  ubifs: Default to zstd compression
  ubifs: Only check replay with inode type to judge if inode linked
2021-05-04 18:08:40 -07:00
Linus Torvalds
d0195c7d7a f2fs-for-5.13-rc1
In this round, we added a new mount option, "checkpoint_merge", which introduces
 a kernel thread dealing with the f2fs checkpoints. Once we start to manage the
 IO priority along with blk-cgroup, the checkpoint operation can be processed in
 a lower priority under the process context. Since the checkpoint holds all the
 filesystem operations, we give a higher priority to the checkpoint thread all
 the time.
 
 Enhancement:
 - introduce gc_merge mount option to introduce a checkpoint thread
 - improve to run discard thread efficiently
 - allow modular compression algorithms
 - expose # of overprivision segments to sysfs
 - expose runtime compression stat to sysfs
 
 Bug fix:
 - fix OOB memory access by the node id lookup
 - avoid touching checkpointed data in the checkpoint-disabled mode
 - fix the resizing flow to avoid kernel panic and race conditions
 - fix block allocation issues on pinned files
 - address some swapfile issues
 - fix hugtask problem and kernel panic during atomic write operations
 - don't start checkpoint thread in RO
 
 And, we've cleaned up some kernel coding style and build warnings. In addition,
 we fixed some minor race conditions and error handling routines.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmCQhVIACgkQQBSofoJI
 UNIggA/8DZINzFLMCj6+6P5wNAWj3nYtx/FnwZ7C31f8qkiZjgA4LfONUnDvV7sU
 GS8MuLQz4eTYfqU2rVgGiSm+aCkEOovnk7C7Huo7pezgqYb+5J6ACXsqdU3dcD5M
 kShJMqLKcTKqtOMbnJrdGvmw1/ysuAi7UhSSgVV+9NQxlhxADnagOGbQ7lXNSV3R
 spGMWazGY2uA5DFCCa4lMX79lyFATCzEKB3SKAW5r+8QSmxJY8ViK2Er7AnvwRJz
 XJ/QJ8ALNb/GGyHzBWFv3P6Yxo/G3FkUvTIc5Rhi9P2lUgjI2NALokj7AOnfNh4a
 uSXHVlNrrfH+gpx9xr5z8MUmroCYCCOJ6EhnVweqViRmekY8jSb2HxmUtDTIf19U
 LWl3gtD2GDQx6CY0a0K58Oa2Lp0Bp9MWUdPA/4P21EymZwXum7aCkhV+DnigcoCj
 yCmKlI8nIpCS97dIO/7MsnG6Tu/7c+Prytd2ezUo+6hlkXPZk8shs+elnjlWu/6V
 3ZpSWKzQsPJL8U7eB9H04AxEokrrXm3fRhR86C7JdkEe0gyGFf3dB/G+jqzcNi5m
 ZpxiCeZ8RbNmPpnH8NWeYHk9uDKMOXuUPFYDoaOwImNWfqj0jfhiTxHo4MyBLAuk
 MT632ICcuJLvwgnSbMAI3U7v6+dZXKH4y6U7IHFjxhI7beMzxmI=
 =P5uk
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we added a new mount option, "checkpoint_merge", which
  introduces a kernel thread dealing with the f2fs checkpoints. Once we
  start to manage the IO priority along with blk-cgroup, the checkpoint
  operation can be processed in a lower priority under the process
  context. Since the checkpoint holds all the filesystem operations, we
  give a higher priority to the checkpoint thread all the time.

  Enhancements:
   - introduce gc_merge mount option to introduce a checkpoint thread
   - improve to run discard thread efficiently
   - allow modular compression algorithms
   - expose # of overprivision segments to sysfs
   - expose runtime compression stat to sysfs

  Bug fixes:
   - fix OOB memory access by the node id lookup
   - avoid touching checkpointed data in the checkpoint-disabled mode
   - fix the resizing flow to avoid kernel panic and race conditions
   - fix block allocation issues on pinned files
   - address some swapfile issues
   - fix hugtask problem and kernel panic during atomic write operations
   - don't start checkpoint thread in RO

  And, we've cleaned up some kernel coding style and build warnings. In
  addition, we fixed some minor race conditions and error handling
  routines"

* tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (48 commits)
  f2fs: drop inplace IO if fs status is abnormal
  f2fs: compress: remove unneed check condition
  f2fs: clean up left deprecated IO trace codes
  f2fs: avoid using native allocate_segment_by_default()
  f2fs: remove unnecessary struct declaration
  f2fs: fix to avoid NULL pointer dereference
  f2fs: avoid duplicated codes for cleanup
  f2fs: document: add description about compressed space handling
  f2fs: clean up build warnings
  f2fs: fix the periodic wakeups of discard thread
  f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
  f2fs: fix to avoid GC/mmap race with f2fs_truncate()
  f2fs: set checkpoint_merge by default
  f2fs: Fix a hungtask problem in atomic write
  f2fs: fix to restrict mount condition on readonly block device
  f2fs: introduce gc_merge mount option
  f2fs: fix to cover __allocate_new_section() with curseg_lock
  f2fs: fix wrong alloc_type in f2fs_do_replace_block
  f2fs: delete empty compress.h
  f2fs: fix a typo in inode.c
  ...
2021-05-04 18:03:38 -07:00
Len Brown
3c070b2abf tools/power turbostat: version 2021.05.04
Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Len Brown
b60c573dc2 tools/power turbostat: Support "turbostat --hide idle"
As idle, in particular, can have many columns on some machines...
Make it easy to ignore them all at once.

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00
Len Brown
38c6663a68 tools/power turbostat: elevate priority of interval mode
This makes interval mode less likely to see delayed
results on a heavily loaded system.

Signed-off-by: Len Brown <len.brown@intel.com>
2021-05-04 20:01:09 -04:00