Use mt76x02_dev data structure as reference in mt76x02_mac.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use mt76x02_dev data structure as reference in mt76x02_usb_mcu.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use mt76x02_dev data structure as reference in mt76x02_util.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use mt76x02_dev data structure as reference in mt76x02_phy.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use mt76x02_dev data structure as reference in mt76x02_mcu.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix typo in bank check in mt76x0_rf_csr_{wr,rr} routines.
This issue has never been hit since mt76x0_rf_csr_{wr,rr}
are actually used just by pci code
Fixes: 10de7a8b4a ("mt76x0: phy files")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use mt76_is_usb() to identify RF access method instead of
MT76_STATE_MCU_RUNNING flag and add warning since MCU has
to be initialized before we can access RF registers via MCU.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PCIe version don't use MCU for RF registers access. We need
to correct RF CSR method to support up to 127 RF registers.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the driver is built on 32 bit architectures during compile test,
the linker complains about "__udivdi3" being undefined. We have to use
do_div macro instead of the division operator when dividing u64 value.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This adds device tree binding documentation for the CPU watchdog found
on Armada 37xx SOCs (EspressoBin, Turris Mox).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This adds support for the CPU watchdog found on Marvell Armada 37xx
SoCs.
There are 4 counters which can be set as CPU watchdog counters.
This driver uses the second counter (ID 1, counting from 0) as watchdog
counter, and first counter (ID 0) to implement pinging on the second
counter without the need to disable it.
Since counters IDs 2 and 3 are enabled already before even U-Boot
starts, this driver does not use them at all, for example by adding a
device tree property for counter selection.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add description of DT bindings for mpc8xxx-wdt driver which
handles the CPU watchdog timer on the mpc83xx, mpc86xx and mpc8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
mpc8xxx watchdog driver supports the following platforms:
- mpc8xx
- mpc83xx
- mpc86xx
Those three platforms have a 32 bits register which provides the
reason of the last boot, including whether it was caused by the
watchdog.
mpc8xx: Register RSR, bit SWRS (bit 3)
mpc83xx: Register RSR, bit SWRS (bit 28)
mpc86xx: Register RSTRSCR, bit WDT_RR (bit 11)
This patch maps the register as defined in the device tree and updates
wdt.bootstatus based on the value of the watchdog related bit. Then
the information can be retrieved via the WDIOC_GETBOOTSTATUS ioctl.
Hereunder is an example of devicetree for mpc8xx,
the Reset Status Register being at offset 0x288:
WDT: watchdog@0 {
compatible = "fsl,mpc823-wdt";
reg = <0x0 0x10 0x288 0x4>;
};
On the mpc83xx, RSR is at offset 0x910
On the mpc86xx, RSTRSCR is at offset 0xe0094
Suggested-by: Radu Rendec <radu.rendec@gmail.com>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # On mpc885
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbwb17AAoJEL/70l94x66D7SwH+wbyl7DK6vH37m+seZDVWCjd
sLs2ZVf7jqhU4nMwq7SJkUL1N1SGzqj5M2XLcWye6m0tWziTktreAsx9PgdtIuOS
42RmO7G3Tt8JbTu6+Ykysjp5JDaNN4RAjynMsn+G53vBw/QHFSW5xsPE2H/67qi7
83n4IlgFcwgP0mwg5K700J2GH2NWzPU9c0nWHK3HDZORoiF88w7+1bjrDMgfyZMi
K5ZCLshE1Fg5fqHlpQjETqIV1bmd0p5BnUend+8yEUqrb/z16IoNALQMBtW7xFCX
oA6dkAn0pCSyS6kqX+Ut9glrKcN2cmXHvcnT7qIUYvw6Yk3egHH1Gn4uB3cKTGk=
=x9gh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Paolo writes:
"KVM fixes for 4.19-rc8
Leftover bugfixes."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
ARM: KVM: Correctly order SGI register entries in the cp15 array
_PAGE_NO_CACHE is a platform specific flag. In addition, this flag
is misleading because one would think it requests a noncached page
whereas a noncached page is _PAGE_NO_CACHE | _PAGE_GUARDED
_PAGE_NO_CACHE alone means write combined noncached page, so lets
use ioremap_wc() instead.
_PAGE_WRITETHRU is also platform specific flag. Use ioremap_wt()
instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to
the generic version rtl_mrate_idx_to_arfr_id, so remove
_rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead.
This also fixes a missing break statement found by CoverityScan in
_rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break
in switch")
Thanks to Joe Perches for spotting this when I submitted an earlier patch.
Fixes: 3c05bedb5f ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The rs_rate_from_ucode_rate() function may return -EINVAL if the rate
is invalid, but none of the callsites check for the error, potentially
making us access arrays with index IWL_RATE_INVALID, which is larger
than the arrays, causing an out-of-bounds access. This will trigger
KASAN warnings, such as the one reported in the bugzilla issue
mentioned below.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659
Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Support for a new scan type;
* Clean-up in the queue handling code;
* A few bug fixes;
-----BEGIN PGP SIGNATURE-----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=etyT
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2018-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Fourth set of iwlwifi patches intended for 4.20
* Support for a new scan type;
* Clean-up in the queue handling code;
* A few bug fixes;
Other arches have ioremap_wt() to map IO areas write-through.
Implement it on PPC as well in order to avoid drivers using
__ioremap(_PAGE_WRITETHRU)
Also implement ioremap_coherent() to avoid drivers using
__ioremap(_PAGE_COHERENT)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Live Partition Migrations require all the present CPUs to execute the
H_JOIN call, and hence rtas_ibm_suspend_me() onlines any offline CPUs
before initiating the migration for this purpose.
The commit 85a88cabad
("powerpc/pseries: Disable CPU hotplug across migrations")
disables any CPU-hotplug operations once all the offline CPUs are
brought online to prevent any further state change. Once the
CPU-Hotplug operation is disabled, the code assumes that all the CPUs
are online.
However, there is a minor window in rtas_ibm_suspend_me() between
onlining the offline CPUs and disabling CPU-Hotplug when a concurrent
CPU-offline operations initiated by the userspace can succeed thereby
nullifying the the aformentioned assumption. In this unlikely case
these offlined CPUs will not call H_JOIN, resulting in a system hang.
Fix this by verifying that all the present CPUs are actually online
after CPU-Hotplug has been disabled, failing which we restore the
state of the offline CPUs in rtas_ibm_suspend_me() and return an
-EBUSY.
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently on POWER9 SMT8 cores systems, in sysfs, we report the
shared_cache_map for L1 caches (both data and instruction) to be the
cpu-ids of the threads in SMT8 cores. This is incorrect since on
POWER9 SMT8 cores there are two groups of threads, each of which
shares its own L1 cache.
This patch addresses this by reporting the shared_cpu_map correctly in
sysfs for L1 caches.
Before the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000ff
After the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000aa
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000aa
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 SMT8 cores consist of two groups of threads, where threads in
each group shares L1-cache. The scheduler is not aware of this
distinction as the current sched-domain hierarchy has all the threads
of the core defined at the SMT domain.
SMT [Thread siblings of the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Due to this, we can observe run-to-run variance when we run a
multi-threaded benchmark bound to a single core based on how the
scheduler spreads the software threads across the two groups in the
core.
We fix this in this patch by defining each group of threads which
share L1-cache to be the SMT level. The group of threads in the SMT8
core is defined to be the CACHE level. The sched-domain hierarchy
after this patch will be :
SMT [Thread siblings in the core that share L1 cache]
CACHE [Thread siblings that are in the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On IBM POWER9, the device tree exposes a property array identifed by
"ibm,thread-groups" which will indicate which groups of threads share
a particular set of resources.
As of today we only have one form of grouping identifying the group of
threads in the core that share the L1 cache, translation cache and
instruction data flow.
This patch adds helper functions to parse the contents of
"ibm,thread-groups" and populate a per-cpu variable to cache
information about siblings of each CPU that share the L1, traslation
cache and instruction data-flow.
It also defines a new global variable named "has_big_cores" which
indicates if the cores on this configuration have multiple groups of
threads that share L1 cache.
For each online CPU, it maintains a cpu_smallcore_mask, which
indicates the online siblings which share the L1-cache with it.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If GCC is not built with glibc support then we must explicitly tell it
which register to use for TLS mode stack protector, otherwise it will
error out and the cc-option check will fail.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 6c1719942e ("powerpc/of: Remove useless register save/restore
when calling OF back") removed the saving of srr0 and srr1 when calling
into OpenFirmware. Commit e31aa453bb ("powerpc: Use LOAD_REG_IMMEDIATE
only for constants on 64-bit") did the same for rtas.
This means we don't need to save the extra stack space and can use
the common SWITCH_FRAME_SIZE.
There were already no users of _SRR0 and _SRR1 so we can remove them
too.
Link: https://github.com/linuxppc/linux/issues/83
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc mobility code may receive RTAS requests to perform PRRN
(Platform Resource Reassignment Notification) topology changes at any
time, including during LPAR migration operations.
In some configurations where the affinity of CPUs or memory is being
changed on that platform, the PRRN requests may apply or refer to
outdated information prior to the complete update of the device-tree.
This patch changes the duration for which topology updates are
suppressed during LPAR migrations from just the rtas_ibm_suspend_me()
/ 'ibm,suspend-me' call(s) to cover the entire migration_store()
operation to allow all changes to the device-tree to be applied prior
to accepting and applying any PRRN requests.
For tracking purposes, pr_info notices are added to the functions
start_topology_update() and stop_topology_update() of 'numa.c'.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ever since commit 15a3204d24 ("powerpc/64s: Set assembler machine type
to POWER4") we force -mpower4 to be passed to the assembler
irrespective of the CFLAGS used (for Book3s 64).
When building a powerpc64 kernel with clang, clang will not add -many
to the assembler flags, so any instructions that the compiler has
generated that are not available on power4 will cause an error:
/usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \
-I ./arch/powerpc/include -I ./arch/powerpc/include/generated \
-I ./include -I ./arch/powerpc/include/uapi \
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \
-maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s
/tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel'
GCC does include -many, so the GCC driven gas call will succeed:
as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I
./include -I ./arch/powerpc/include/uapi
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc
-a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o
Note that isel is power7 and above for IBM CPUs. GCC only generates it
for Power9 and above, but the above test was run against the clang
generated assembly.
Peter Bergner explains:
When using -many -mpower4, gas will first try and find a matching
power4 mnemonic and failing that, it will then allow any valid
mnemonic that gas knows about. GCC's use of -many predates me
though.
IIRC, Alan looked at trying to remove it, but I forget why he
didn't. Could be either a gcc or gas issue at the time. I'm not sure
whether issue still exists or not. He and I have modified how gas
works internally a fair amount since he tried removing gcc use of
-many.
I will also note that when using -many, gas will choose the first
mnemonic that matches in the mnemonic table and we have (mostly)
sorted the table so that server mnemonics show up earlier in the
table than other mnemonics, so they'll be seen/chosen first.
By explicitly setting -many we can build with Clang and GCC while
retaining the -mpower4 option.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The variable 'aa_index' is defined as an unsigned value in
update_lmb_associativity_index(), but find_aa_index() may return -1
when dlpar_clone_property() fails. So change find_aa_index() to return
a bool, which indicates whether 'aa_index' was found or not.
Fixes: c05a5a4096 ("powerpc/pseries: Dynamic add entires to associativity lookup array")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Nathan Fontenot nfont@linux.vnet.ibm.com>
[mpe: Tweak changelog, rename is_found to just found]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than mixing "if (state)" blocks and gotos, convert entirely to
"if (state)" blocks to make the state machine behaviour clearer.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The wait_state member of eeh_ops does not need to be platform
dependent; it's just logic around eeh_ops.get_state(). Therefore,
merge the two (slightly different!) platform versions into a new
function, eeh_wait_state() and remove the eeh_ops member.
While doing this, also correct:
* The wait logic, so that it never waits longer than max_wait.
* The wait logic, so that it never waits less than
EEH_STATE_MIN_WAIT_TIME.
* One call site where the result is treated like a bit field before
it's checked for negative error values.
* In pseries_eeh_get_state(), rename the "state" parameter to "delay"
because that's what it is.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, eeh_pe_state_mark() marks a PE (and it's children) with a
state and then performs additional processing if that state included
EEH_PE_ISOLATED.
The state parameter is always a constant at the call site, so
rearrange eeh_pe_state_mark() into two functions and just call the
appropriate one at each site.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function eeh_pe_state_mark_with_cfg() just performs the work of
eeh_pe_state_mark() and then, conditionally, the work of
eeh_pe_state_clear(). However it is only ever called with a constant
state such that the condition is always true, so replace it by direct
calls.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the call to eeh_dev_to_pe() up, so that later it's clear that
"pe" isn't NULL.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the name of the fields in eeh_rmv_data to clarify their usage.
Change "edev_list" to "removed_vf_list" because it does not contain
generic edevs, but rather only edevs that contain virtual functions
(which need to be removed during recovery).
Similarly, change "removed" to "removed_dev_count" because it is a
count of any removed devices, not just those in the above list.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instances of struct eeh_pe are placed in a tree structure using the
fields "child_list" and "child", so place these next to each other
in the definition.
The field "child" is a list entry, so remove the unnecessary and
misleading use of the list initializer, LIST_HEAD(), on it.
The eeh_dev struct contains two list entry fields, called "list" and
"rmv_list". Rename them to "entry" and "rmv_entry" and, as above, stop
initializing them with LIST_HEAD().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the unnecessary cast through void * on the first parameter and
remove the unused second parameter (always NULL).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'bus' member of struct eeh_dev is assigned to once but never used,
so remove it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.
It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.
(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)
This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).
The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().
To handle this, skip devices that have been removed.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.
Handle this by skipping the error log for those devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The boot wrapper is currently built with -Os. By building with O2 we
can meaningfully reduce the time decompressing the kernel.
I tested by comparing 10 runs of each option in Qemu and on hardware.
The kernel is compressed with KERNEL_XZ built with GCC 8.2.0-7ubuntu1.
The values are counts of the timebase.
Qemu TCG powernv Power8:
Os O2 O3
median 10221123889 6201518438 6568186825
stddev 1361267211 429090641 657930076
improvement 39.33% 35.74%
Palmetto Power8:
Os O2 O3
median 50279 50599 35790
stddev 992144533 627130655 623721078
improvement 36.79% 37.13%
Romulus Power9:
Os O2 O3
median 670312391 454733720 448881398
stddev 157569 107276 108760
improvement 32.16% 33.03%
TCG was quite noisy, with every few runs producing an outlier. Even so,
O2 is faster than O3. On hardware the numbers were less noisy and O3 is
slightly faster than O2.
The wrapper size increases when moving from Os. Comparing zImage.epapr
to the existing Os build using bloat-o-meter:
Before=43401, After=56837 (13KB), chg +30.96%
Before=43401, After=64305 (20KB), chg +48.16%
I chose O2 for a balance between Qemu and hardware speed up.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
