Commit 01239d77b9 ("xfs: fix a null pointer dereference in
xfs_bmap_extents_to_btree") attempted to fix a null pointer
dreference when a fuzzing corruption of some kind was found.
This fix was flawed, resulting in assert failures like:
XFS: Assertion failed: ifp->if_broot == NULL, file: fs/xfs/libxfs/xfs_bmap.c, line: 715
.....
Call Trace:
xfs_bmap_extents_to_btree+0x6b9/0x7b0
__xfs_bunmapi+0xae7/0xf00
? xfs_log_reserve+0x1c8/0x290
xfs_reflink_remap_extent+0x20b/0x620
xfs_reflink_remap_blocks+0x7e/0x290
xfs_reflink_remap_range+0x311/0x530
vfs_dedupe_file_range_one+0xd7/0xe0
vfs_dedupe_file_range+0x15b/0x1a0
do_vfs_ioctl+0x267/0x6c0
The problem is that the error handling code now asserts that the
inode fork is not in btree format before the error handling code
undoes the modifications that put the fork back in extent format.
Fix this by moving the assert back to after the xfs_iroot_realloc()
call that returns the fork to extent format, and clean up the jump
labels to be meaningful.
Also, returning ENOSPC when xfs_btree_get_bufl() fails to
instantiate the buffer that was allocated (the actual fix in the
commit mentioned above) is incorrect. This is a fatal error - only
an invalid block address or a filesystem shutdown can result in
failing to get a buffer here.
Hence change this to EFSCORRUPTED so that the higher layer knows
this was a corruption related failure and should not treat it as an
ENOSPC error. This should result in a shutdown (via cancelling a
dirty transaction) which is necessary as we do not attempt to clean
up the (invalid) block that we have already allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over a LPSS I2C controller.
We add a device-link to make sure that the I2C controller is resumed before
the GPU is. But the pci-core changes the power-state of PCI devices from
D3 to D0 at noirq time (to restore the PCI config registers) and before
this commit we were bringing up the I2C controllers from a resume_early
handler which runs later. More specifically the pm-core will first run
all resume_noirq handlers in order and then all resume_early handlers.
So we must not only make sure that the handlers are run in the right order,
but also that the resume of the I2C controller is done at noirq time.
The behavior before this commit, resuming the I2C controller from a
resume_early handler leads to the following errors:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
This commit changes the acpi_lpss.c code to resume the BYT/CHT I2C
controllers at resume_noirq time fixing this.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some Bay Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over the LPSS I2C5 controller.
This one was quite nasty to debug, unlike on CHT where the same problem
leads to errors like these:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
On BYT the read-modify-write done by drivers/acpi/pmic/intel_pmic_xpower.c
on the AXP288 PMIC register to change the power-resource state *seems* to
succeed.
But in reality, because the I2C controller has not been resumed yet, the
read silently fails and returns the wrong value, where as the write does
succeed, writing back the wrong value for all the other power-resources
in the same register, turning off a bunch of them. Which of course does
not end well.
This commit adds a RPM consumer link from the GPU (which has a LNXVIDEO
HID) to the BYT LPSS I2C5 controller, so that the I2C controller gets
resumed before the GPU is resumed and thus before we try to change the
power-resource.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over the LPSS I2C7 controller.
Due to probe ordering currently we resume the GPU and thus try to access
the ACPI power-resources before the I2C controller has been resumed. This
leads to the following errors:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
This commit adds a RPM consumer link from the GPU (which has a LNXVIDEO
HID) to the CHT LPSS I2C7 controller, so that the I2C controller gets
resumed before the GPU is resumed.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over one of the LPSS I2C controllers.
To get the suspend/resume ordering correct for this we need to be able to
add device-links between the GPU and the I2c controller. The GPU is a PCI
device, so this requires acpi_lpss_find_device() to also work on PCI devs.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make hid_uid_match helper accept a NULL uid argument, so that we can also
check for matches against devices with are not expected to have a uid such
as the LNXVIDEO device.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The hid_uid_match() helper is only used to check if a given acpi_device
matches a certain hid + uid combination. Make the first argument the
acpi_device to check to make this more clear.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we're revalidating an existing dentry in order to open a file, we need
to ensure that we check the directory has not changed before we optimise
away the lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Refactor the code in nfs_lookup_revalidate() as a stepping stone towards
optimising and fixing nfs4_lookup_revalidate().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We need to ensure that inode and dentry revalidation occurs correctly
on reopen of a file that is already open. Currently, we can end up
not revalidating either in the case of NFSv4.0, due to the 'cached open'
path.
Let's fix that by ensuring that we only do cached open for the special
cases of open recovery and delegation return.
Reported-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Module removal is RCU safe by design, so we really have no need to
lock the auth_flavors[] array. Substitute a lockless scheme to
add/remove entries in the array, and then use rcu.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that each struct nfs_pgio_header corresponds to one RPC call, we
only have one writer to the struct nfs_pgio_header.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Save a few bytes by allowing the read/write specific fields of the
structures to share storage.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When the server fails to return post-op attributes, the client's
attempt to place read data directly in the page cache fails, and
so we have to do an extra copy in order to realign the data with
page borders.
This patch attempts to detect servers that don't return post-op
attributes on read (e.g. for pNFS) and adjusts the placement
calculation accordingly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The convention in the rest of the code is to have a separate function
for anything that might be ifdef-ed out.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is to match kernel coding style for switch statements.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Most places in the kernel tend to line up cases with the switch to
reduce indentation, so move this over to match that style.
Additionally, I handle the (status >= 0) case in the switch so that we
only "goto restart" from a single place after error handling.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Moving all of this into a new function removes the need for cramped
indentation, making the code overall easier to look at. I also take
this chance to switch copy recovery over to using
nfs4_stateid_match_other()
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
for tightly coupled DSes client must ignore provided synthetic uid and
gid as stated in draft-ietf-nfsv4-flex-files-19#section-5.1.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.
The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.
Fixes: 033853325f (NFSv4.1 respect server's max size in CREATE_SESSION")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reduce contention on the inode->i_lock by ensuring that we use RCU
when looking up the NFS open context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Speed up lookups of an existing lock context by avoiding the inode->i_lock,
and using RCU instead.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For the 'files' and 'flexfiles' layout types, we do not expect the reply
to be any larger than 4k. The block and scsi layout types are a little more
greedy, so we keep allocating the maximum response size for now.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a bvec array to struct xdr_buf, and have the client allocate it
when we need to receive data into pages.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the RPC call relies on the receive call allocating pages as buffers,
then let's label it so that we
a) Don't leak memory by allocating pages for requests that do not expect
this behaviour
b) Can optimise for the common case where calls do not require allocation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We no longer need priority semantics on the xprt->sending queue, because
the order in which tasks are sent is now dictated by their position in
the send queue.
Note that the backlog queue remains a priority queue, meaning that
slot resources are still managed in order of task priority.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server is slow, we can find ourselves with quite a lot of entries
on the receive queue. Converting the search from an O(n) to O(log(n))
can make a significant difference, particularly since we have to hold
a number of locks while searching.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Treat socket write space handling in the same way we now treat transport
congestion: by denying the XPRT_LOCK until the transport signals that it
has free buffer space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The theory was that we would need to grab the socket lock anyway, so we
might as well use it to gate the allocation of RPC slots for a TCP
socket.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rather than forcing each and every RPC task to grab the socket write
lock in order to send itself, we allow whichever task is holding the
write lock to attempt to drain the entire transmit queue.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Avoid memory starvation by giving RPCs that are tagged with the
RPC_TASK_SWAPPER flag the highest priority.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Both RDMA and UDP transports require the request to get a "congestion control"
credit before they can be transmitted. Right now, this is done when
the request locks the socket. We'd like it to happen when a request attempts
to be transmitted for the first time.
In order to support retransmission of requests that already hold such
credits, we also want to ensure that they get queued first, so that we
don't deadlock with requests that have yet to obtain a credit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
One of the intentions with the priority queues was to ensure that no
single process can hog the transport. The field task->tk_owner therefore
identifies the RPC call's origin, and is intended to allow the RPC layer
to organise queues for fairness.
This commit therefore modifies the transmit queue to group requests
by task->tk_owner, and ensures that we round robin among those groups.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
