Document PFC support for the RZ/G1N (R8A7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add devicetree support for HiKey970 development board which
based on Hi3670 SoC and is also one of the 96Boards Consumer
Edition and AI platform.
Only UART6 is enabled which is the default console required
by the 96Boards Consumer Edition Specification.
This patch has been tested on HiKey970 Board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add initial devicetree support for Hisilicon Hi3670 SoC which
is similar to Hi3660 SoC with NPU support.
This SoC has Octal core BigLittle CPUs in two clusters(4 * A53 & 4 * A73).
Only UART6 has been added for console support which is
pre configured by the bootloader. A fixed clock is sourcing
the UART6 which will get replaced by the clock driver when available.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
When using a GCC cross toolchain which is not in a compiled in
Clang search path, Clang reverts to the system assembler and
linker. This leads to assembler or linker errors, depending on
which tool is first used for a given architecture.
It seems that Clang is not searching $PATH for a matching
assembler or linker.
Make sure that Clang picks up the correct assembler or linker by
passing the cross compilers bin directory as search path.
This allows to use Clang provided by distributions with GCC
toolchains not in /usr/bin.
Link: https://github.com/ClangBuiltLinux/linux/issues/78
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-and-tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The clocks property should either be present for all the CPUs of a
cluster or none. If these are present only for a subset of CPUs of a
cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add missing clocks property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
When building to record the mcount locations the kernel uses
KBUILD_CFLAGS but not KBUILD_CPPFLAGS. This means it lacks
-Qunused-arguments when building with clang, resulting in a lot of
noisy warnings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add all RZ/G1N Clock Pulse Generator Core Clock Outputs, as listed in
Table 7.2b ("List of Clocks [RZ/G1M/N]") of the RZ/G1 Hardware User's
Manual.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch updates license to use SPDX-License-Identifier
instead of verbose license text on Renesas related headers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The code for conditionally printing unhanded signals is duplicated twice
in arch/x86/kernel/traps.c. Factor it out into it's own subroutine
called show_signal to make the code clearer and easier to maintain.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This separates the logic of generating the signal from the logic of
gathering the information about the bounds violation.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The value passed in to addr_referenced is of type void __user *, so update
the addr_referenced parameter in trace_mpx_bounds_register_exception to match.
Also update the addr_referenced paramater in TP_STRUCT__entry as it again
holdes the same value.
I don't know why this was missed earlier but sparse was complaining when
testing test branch so fix this now.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This simplifies the code making it clearer what is going on.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Only the call from do_sigbus will send SIGBUS due to a memory machine
check error. Consolidate all of the machine check signal generation
code in do_sigbus and remove the now unnecessary fault parameter from
force_sig_info_fault.
Explicitly use the now constant si_code BUS_ADRERR in the call
to force_sig_info_fault from do_sigbus.
This makes the code in arch/x86/mm/fault.c easier to follower and
simpler to maintain.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function fill_sigtrap_info now only has one caller so remove
it and put it's contents in it's caller.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Replace user_single_step_siginfo with user_single_step_report
that allocates siginfo structure on the stack and sends it.
This allows tracehook_report_syscall_exit to become a simple
if statement that calls user_single_step_report or ptrace_report_syscall
depending on the value of step.
Update the default helper function now called user_single_step_report
to explicitly set si_code to SI_USER and to set si_uid and si_pid to 0.
The default helper has always been doing this (using memset) but it
was far from obvious.
The powerpc helper can now just call force_sig_fault.
The x86 helper can now just call send_sigtrap.
Unfortunately the default implementation of user_single_step_report
can not use force_sig_fault as it does not use a SIGTRAP si_code.
So it has to carefully setup the siginfo and use use force_sig_info.
The net result is code that is easier to understand and simpler
to maintain.
Ref: 85ec7fd9f8 ("ptrace: introduce user_single_step_siginfo() helper")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The N value was computed by kernel driver that based on synchronous clock
mode. But only specific N value (0x8000) would be acceptable for
LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode.
With the other N value, Tcon will enter BITS mode and display black screen.
Add this panel into quirk database and give particular N value when
calculate M/N divider.
v2: no update
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.
v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
DP quirk list just compare sink or branch device's OUI so far.
That means particular vendor's products will be applied specific
change. This change would confirm device_id the same or not.
Then driver can implement some changes for branch/sink device
that really need additional WA.
v2: use sizeof instead of hard coded '6'
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-2-git-send-email-shawn.c.lee@intel.com
When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:
GEN /tmp/build/perf/python/perf.so
In file included from /usr/include/python3.7m/Python.h:126,
from /git/linux/tools/perf/util/python.c:2:
/usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
error: command 'gcc' failed with exit status 1
And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.
Now perf builds with gcc in ClearLinux with the following Dockerfile:
# docker.io/acmel/linux-perf-tools-build-clearlinux:latest
FROM docker.io/clearlinux:latest
MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
RUN swupd update && \
swupd bundle-add sysadmin-basic-dev
RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
groupadd -r perfbuilder && \
useradd -m -r -g perfbuilder perfbuilder && \
chown -R perfbuilder.perfbuilder /tmp/build/ /git/
USER perfbuilder
COPY rx_and_build.sh /
ENV EXTRA_MAKE_ARGS=PYTHON=python3
ENTRYPOINT ["/rx_and_build.sh"]
Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:
clang version 6.0.1 (tags/RELEASE_601/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/sbin
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
make[1]: *** [Makefile.perf:206: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/git/linux/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building the perf CTF converter fails with gcc 4.8.4 on Ubuntu 14.04
with the following error:
error: missing initializer for field ‘fd’ of ‘struct perf_data_file’
[-Werror=missing-field-initializers]
Per 4b838b0db4 ("perf tools: Add compression id into 'struct
kmod_path'") and the ensuing discussion on the mailing list, it appears
that this affects other distributions and gcc versions.
Signed-off-by: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180829201648.19588-1-jeremie.galarneau@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used outside of util object in following patches.
Committer note:
We need to have the header with the definition for loff_t in util.h
since we now use it in the copyfile_offset() signature.
Also move that prototype closer to the other copyfile_ prefixed
functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct perf_mmap map argument will hold the file pointer to write
the data to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_mmap struct will hold a file pointer to write the mmap's
contents, so we need to propagate it down the stack to record__write
callers instead of its member the auxtrace_mmap struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we keep a perf_tool pointer inside perf_session, there's no need
to have a perf_tool argument in the event_op3 callback. Remove it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-3-jolsa@kernel.org
[ Fix the builtin-inject.c build for !HAVE_AUXTRACE_SUPPORT ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we keep a perf_tool pointer inside perf_session, there's no
need to have a perf_tool argument in the event_op2 callback. Remove it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use PTR_ERR_OR_ZERO() in bpf__setup_stdout() return code instead of open
coded equivalent.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1536284082-23466-2-git-send-email-dingxiang@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add PTR_ERR_OR_ZERO, so that tools can use it, just like the kernel.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1536284082-23466-1-git-send-email-dingxiang@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane reported a possible issue in the ordered events code, which
could lead to allocating more memory than guarded by max_alloc_size.
He also suggested the fix to properly check that the new size is below
the max_alloc_size limit.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180907102455.7030-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When ordering events, we use preallocated buffers to store separate
events. Those buffers currently don't have their own struct, but since
they are basically an array of 'struct ordered_event' objects, we use
the first event to hold buffers data - list head, that holds all buffers
together:
struct ordered_events {
...
struct ordered_event *buffer;
...
};
struct ordered_event {
u64 timestamp;
u64 file_offset;
union perf_event *event;
struct list_head list;
};
This is quite convoluted and error prone as demonstrated by free-ing
issue discovered and fixed by Stephane in here [1].
This patch adds the 'struct ordered_events_buffer' object, that holds
the buffer data and frees it up properly.
[1] - https://marc.info/?l=linux-kernel&m=153376761329335&w=2
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180907102455.7030-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Borislav is effectivly maintaining parts of X86 already, make it official.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Sync syscall to DAX file needs to flush processor cache, but it
currently does not flush to existing DAX files. This is because
'ext2_da_aops' is set to address_space_operations of existing DAX
files, instead of 'ext2_dax_aops', since S_DAX flag is set after
ext2_set_aops() in the open path.
Similar to ext4, change ext2_iget() to initialize i_flags before
ext2_set_aops().
Fixes: fb094c9074 ("ext2, dax: introduce ext2_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Firmware-Assisted Dump (FADump) needs to be registered again after any
memory hot add/remove operation to update the crash memory ranges. But
currently, the kernel returns '-EEXIST' if we try to register without
uregistering it first. This could expose the system to racing issues
while unregistering and registering FADump from userspace during udev
events. Spare the userspace of this and let it be taken care of in the
kernel space for a simpler interface.
Since this change, running 'echo 1 > /sys/kernel/fadump_registered'
would result in re-regisering (unregistering and registering) FADump,
if it was already registered.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In lparcfg_write we hard code kbuf_sz and then use this as the variable
length of kbuf creating a variable length array. Since we're hard coding
the length anyway just define the array using this as the length and
remove the need for kbuf_sz, thus removing the variable length array.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In prom_check_platform_support() we retrieve and parse the
"ibm,arch-vec-5-platform-support" property of the chosen node.
Currently we use a variable length array however to avoid this use an
array of constant length 8.
This property is used to indicate the supported options of vector 5
bytes 23-26 of the ibm,architecture.vec node. Each of these options
is a pair of bytes, thus for 4 options we have a max length of 8 bytes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This re-applies commit b91c1e3e7a ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits:
f2ca809059 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017)
d466f6c5ca ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017)
f84ed59a61 ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)
We see a large number of duplicate const errors in the user access
code when building with llvm/clang:
include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
ret = __get_user(c, uaddr);
The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.
Removing const does not seem to have any effect on GCC code
generation.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text 0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text 0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Disable new features from recent releases, and clean out some other
unused options:
- Enable EXPERT, so we can disable some things
- Disable non-powerpc BPF decoders
- Disable TASKSTATS
- Disable unused syscalls
- Set more things to be modules
- Turn off unused network vendors
- PPC_OF_BOOT_TRAMPOLINE and FB_OF are unused on powernv
- Drop unused Radeon and Matrox GPU drivers
- IPV6 support landed in petitboot
- Bringup related command line powersave=off dropped, switch to quiet
Set CONFIG_I2C_CHARDEV=y as the module is not loaded automatically, and
without this i2cget etc. will fail in the skiroot environment.
This defconfig gets us build coverage of KERNEL_XZ, which was broken in
the 4.19 merge window for powerpc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are three instances in which dlpar hotplug events are invoked;
handling a hotplug interrupt (in a kvm guest), handling a dlpar
request through sysfs, and updating LMB affinity when handling a
PRRN event. Only in the case of handling a hotplug interrupt do we
have to put the work on a workqueue, the other cases can handle the
dlpar request directly.
This patch exports the handle_dlpar_errorlog() function so that
dlpar hotplug events can be handled directly and updates the two
instances mentioned above to use the direct invocation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.
Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.
This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
