Commit graph

798,688 commits

Author SHA1 Message Date
Eric W. Biederman
0c362f96e1 signal: Stop special casing TRAP_FIXME and FPE_FIXME in siginfo_layout
After more experience with the cases where no one the si_code of 0
is used both as a signal specific si_code, and as SI_USER it appears
that no one cares about the signal specific si_code case and the
good solution is to just fix the architectures by using
a different si_code.

In none of the conversations has anyone even suggested that
anything depends on the signal specific redefinition of SI_USER.

There are at least test cases that care when si_code as 0 does
not work as si_user.

So make things simple and keep the generic code from introducing
problems by removing the special casing of TRAP_FIXME and FPE_FIXME.
This will ensure the generic case of sending a signal with
kill will always set SI_USER and work.

The architecture specific, and signal specific overloads that
set si_code to 0 will now have problems with signalfd and
the 32bit compat versions of siginfo copying.   At least
until they are fixed.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:52 -05:00
Eric W. Biederman
c999b933fa signal: Reduce copy_siginfo_to_user to just copy_to_user
Now that every instance of struct siginfo is now initialized it is no
longer necessary to copy struct siginfo piece by piece to userspace
but instead the entire structure can be copied.

As well as making the code simpler and more efficient this means that
copy_sinfo_to_user no longer cares which union member of struct
siginfo is in use.

In practice this means that all 32bit architectures that define
FPE_FIXME will handle properly send SI_USER when kill(SIGFPE) is sent.
While still performing their historic architectural brokenness when 0
is used a floating pointer signal.  This matches the current behavior
of 64bit architectures that define FPE_FIXME who get lucky and an
overloaded SI_USER has continuted to work through copy_siginfo_to_user
because the 8 byte si_addr occupies the same bytes in struct siginfo
as the 4 byte si_pid and the 4 byte si_uid.

Problematic architectures still need to fix their ABI so that signalfd
and 32bit compat code will work properly.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:52 -05:00
Eric W. Biederman
3eb0f5193b signal: Ensure every siginfo we send has all bits initialized
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:51 -05:00
Eric W. Biederman
f6ed1ecad5 signal/nds32: Use force_sig(SIGILL) in do_revisn
As originally committed do_revisn would deliver a siginfo for SIGILL
with an si_code composed of random stack contents.  That makes no
sense and is not something userspace can depend on.  So simplify
the code and just use "force_sig(SIG_ILL, current)" instead.

Fixes: 2923f5ea77 ("nds32: Exception handling")
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:33 -05:00
Eric W. Biederman
be5c2ff06c signal/nds32: Use force_sig in unhandled_interruption and unhandled_exceptions
Neither unhandled_interrupt nor unhandled_exceptions fills in any of the
siginfo fields whend sending SIGKILL.  Further because it is SIGKILL
even if all of the fields were filled out appropriately it would be impossible
for the process to read any of the siginfo fields.  So simplfy things and
just use force_sig instead of force_sig_info.

Fixes: 2923f5ea77 ("nds32: Exception handling")
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:39:49 -05:00
Jeffrin Jose T
0183df0baf selftests:firmware: fixes a call to a wrong function name
This is a patch to the tools/testing/selftests/firmware/fw_run_tests.sh
 file which fixes a bug which calls to a wrong function name,which in turn
 blocks the execution of certain tests.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 17:27:09 +02:00
Alexander Duyck
8315ef6f39 ixgbe: Avoid performing unnecessary resets for macvlan offload
The original implementation for macvlan offload has us performing a full
port reset every time we added a new macvlan. This shouldn't be necessary
and can be avoided with a few behavior changes.

This patches updates the logic for the queues so that we have essentially 3
possible configurations for macvlan offload. They consist of 15 macvlans
with 4 queues per macvlan, 31 macvlans with 2 queues per macvlan, and 63
macvlans with 1 queue per macvlan. As macvlans are added you will encounter
up to 3 total resets if you add all the way up to 63, and after that the
device will stay in the mode supporting up to 63 macvlans until the L2FW
flag is cleared.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
865255b5a2 ixgbe: Drop real_adapter from l2 fwd acceleration structure
This patch drops the real_adapter member from the fwd_adapter structure.
The general idea behind the change is that the real_adapter is carrying
unnecessary data since we could always just grab the adapter structure
from netdev_priv(macvlan->lowerdev) if we really needed to get at it.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
3335915d07 ixgbe/fm10k: Only support macvlan offload for types that support destination filtering
Both the ixgbe and fm10k drivers support destination filtering.

Instead of adding a ton of complexity to support either source or passthru
mode we can instead just avoid offloading them for now. Doing this we avoid
leaking packets into interfaces that aren't meant to receive them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
53cd4d8e4d macvlan: Provide function for interfaces to release HW offload
This patch provides a basic function to allow a lower device to disable
macvlan offload if it was previously enabled on a given macvlan. The idea
here is to allow for recovery from failure should the lowerdev run out of
resources.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
6cb1937d4e macvlan: Add function to test for destination filtering support
This patch adds a function indicating if a given macvlan can fully supports
destination filtering, especially as it relates to unicast traffic. For
those macvlan interfaces that do not support destination filtering such
passthru or source mode filtering we should not be enabling offload
support.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
a222311283 macvlan: macvlan_count_rx shouldn't be static inline AND extern
It doesn't make sense to define macvlan_count_rx as a static inline and
then add a forward declaration after that as an extern. I am dropping the
extern declaration since it seems like it is something that likely got
missed when the function was made an inline.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
8d80ac43de ixgbe/fm10k: Drop tracking stats for macvlan broadcast/multicast
Drop dead code now that we shouldn't be receiving broadcast or multicast
frames on the queues associated to the macvlan netdev.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
81d4e91cd5 macvlan: Use software path for offloaded local, broadcast, and multicast traffic
This change makes it so that we use a software path for packets that are
going to be locally switched between two macvlan interfaces on the same
device. In addition we resort to software replication of broadcast and
multicast packets instead of offloading that to hardware.

The general idea is that using the device for east/west traffic local to
the system is extremely inefficient. We can only support up to whatever the
PCIe limit is for any given device so this caps us at somewhere around 20G
for devices supported by ixgbe. This is compounded even further when you
take broadcast and multicast into account as a single 10G port can come to
a crawl as a packet is replicated up to 60+ times in some cases. In order
to get away from that I am implementing changes so that we handle
broadcast/multicast replication and east/west local traffic all in
software.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
7d775f6347 macvlan: Rename fwd_priv to accel_priv and add accessor function
This change renames the fwd_priv member to accel_priv as this more
accurately reflects the actual purpose of this value. In addition I am
adding an accessor which will allow us to further abstract this in the
future if needed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Alexander Duyck
b056b83c06 ixgbe: Drop support for macvlan specific unicast lists
Drop the code for handling macvlan specific unicast lists. It isn't needed
since we don't take any efforts to maintain it when we bring the interface
up and it takes the slow path anyway.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-25 08:26:19 -07:00
Oscar Mateo
ff047a87cf drm/i915/icl: Correctly clear lost ctx-switch interrupts across reset for Gen11
Interrupt handling in Gen11 is quite different from previous platforms.

v2: Rebased (Michel)
v3: Rebased with wiggle
v4: Rebased, remove TODO warning correctly (Daniele)
v5: Rebased, made gen11_gtiir const while at it (Michel)
v6: Rebased
v7: Adapt to the style currently in upstream

Suggested-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1524605995-22324-1-git-send-email-oscar.mateo@intel.com
2018-04-25 16:12:24 +01:00
Jerry (Fangzhi) Zuo
7ad35721e7 drm/amd/display: Check dc_sink every time in MST hotplug
Extended fix to: "Don't read EDID in atomic_check"

Fix issue of missing dc_sink in .mode_valid in hot plug routine.

Need to check dc_sink everytime in .get_modes hook after checking
edid, since edid is not getting removed in hot unplug but dc_sink
doesn't.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-04-25 10:08:09 -05:00
Jerry (Fangzhi) Zuo
d973f8535f drm/amd/display: Update MST edid property every time
Extended fix to: "Don't read EDID in atomic_check"

Fix display property not observed in GUI display after hot plug.

Call drm_mode_connector_update_edid_property every time in
.get_modes hook, due to the fact that edid property is getting
removed from usermode ioctl DRM_IOCTL_MODE_GETCONNECTOR each time
in hot unplug.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-04-25 10:08:02 -05:00
Harry Wentland
c7b8de0038 drm/amd/display: Don't read EDID in atomic_check
We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.

Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-04-25 10:07:50 -05:00
Harry Wentland
f287765680 drm/amd/display: Disallow enabling CRTC without primary plane with FB
The below commit

    "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"

introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.

Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.

This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.

Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-25 10:07:49 -05:00
Mikita Lipski
ad64dc0137 drm/amd/display: Fix deadlock when flushing irq
Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-04-25 10:07:29 -05:00
Chris Wilson
f6f109155f drm/i915: Remove obsolete min/max freq setters from debugfs
A more complete, and more importantly stable, interface for controlling
the RPS frequency range is available in sysfs, obsoleting the unstable
debugfs.

It's presence seems to trick people into using it, forgetting it is not
ABI.

References: https://bugs.freedesktop.org/show_bug.cgi?id=106237
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425142334.27113-1-chris@chris-wilson.co.uk
2018-04-25 16:06:01 +01:00
Takashi Iwai
4d31c6e41e Merge branch 'for-linus' into for-next
Back-merge 4.17-rc3 fixes for further development.
This will bump the base to 4.17-rc2, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25 16:44:36 +02:00
Takashi Iwai
8a7d6003df ALSA: hda - Skip jack and others for non-existing PCM streams
When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited
number of devices available, and HD-audio, especially with HDMI/DP
codec, will fail to create more than two devices.

The driver warns about the lack of such devices and skips the PCM
device creations, but the HDMI driver still tries to create the
corresponding JACK, SPDIF and ELD controls even for the non-existing
PCM substreams.  This results in confusion on user-space, and even may
break the operation.

Similarly, Intel HDMI/DP codec builds the ELD notification from i915
graphics driver, and this may be broken if a notification is sent for
the non-existing PCM stream.

This patch adds the check of the existence of the assigned PCM
substream in the both scenarios above, and skips the further operation
if the PCM substream is not assigned.

Fixes: 9152085def ("ALSA: hda - add DP MST audio support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25 16:37:19 +02:00
Gianluca Borello
1612a981b7 bpf, x64: fix JIT emission for dead code
Commit 2a5418a13f ("bpf: improve dead code sanitizing") replaced dead
code with a series of ja-1 instructions, for safety. That made JIT
compilation much more complex for some BPF programs. One instance of such
programs is, for example:

bool flag = false
...
/* A bunch of other code */
...
if (flag)
        do_something()

In some cases llvm is not able to remove at compile time the code for
do_something(), so the generated BPF program ends up with a large amount
of dead instructions. In one specific real life example, there are two
series of ~500 and ~1000 dead instructions in the program. When the
verifier replaces them with a series of ja-1 instructions, it causes an
interesting behavior at JIT time.

During the first pass, since all the instructions are estimated at 64
bytes, the ja-1 instructions end up being translated as 5 bytes JMP
instructions (0xE9), since the jump offsets become increasingly large (>
127) as each instruction gets discovered to be 5 bytes instead of the
estimated 64.

Starting from the second pass, the first N instructions of the ja-1
sequence get translated into 2 bytes JMPs (0xEB) because the jump offsets
become <= 127 this time. In particular, N is defined as roughly 127 / (5
- 2) ~= 42. So, each further pass will make the subsequent N JMP
instructions shrink from 5 to 2 bytes, making the image shrink every time.
This means that in order to have the entire program converge, there need
to be, in the real example above, at least ~1000 / 42 ~= 24 passes just
for translating the dead code. If we add this number to the passes needed
to translate the other non dead code, it brings such program to 40+
passes, and JIT doesn't complete. Ultimately the userspace loader fails
because such BPF program was supposed to be part of a prog array owner
being JITed.

While it is certainly possible to try to refactor such programs to help
the compiler remove dead code, the behavior is not really intuitive and it
puts further burden on the BPF developer who is not expecting such
behavior. To make things worse, such programs are working just fine in all
the kernel releases prior to the ja-1 fix.

A possible approach to mitigate this behavior consists into noticing that
for ja-1 instructions we don't really need to rely on the estimated size
of the previous and current instructions, we know that a -1 BPF jump
offset can be safely translated into a 0xEB instruction with a jump offset
of -2.

Such fix brings the BPF program in the previous example to complete again
in ~9 passes.

Fixes: 2a5418a13f ("bpf: improve dead code sanitizing")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25 16:29:32 +02:00
Peter Xu
9a0fd67530 tracing: Fix missing tab for hwlat_detector print format
It's been missing for a while but no one is touching that up.  Fix it.

Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com

CC: Ingo Molnar <mingo@kernel.org>
Cc:stable@vger.kernel.org
Fixes: 7b2c862501 ("tracing: Add NMI tracing in hwlat detector")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:46 -04:00
Masami Hiramatsu
25aa50e0ca selftests: ftrace: Add a testcase for multiple actions on trigger
Add a testcase for multiple actions with different
parameters on an event trigger, which has been fixed
by commit 192c283e93bd ("tracing: Add action comparisons
 when testing matching hist triggers").

Link: http://lkml.kernel.org/r/152292055227.15769.6327959816123227152.stgit@devbox

Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:36 -04:00
Masami Hiramatsu
ef39a01203 selftests: ftrace: Fix trigger extended error testcase
Previous testcase redirects echo-out into /dev/null
using "&>" as below

echo "trigger-command" >> trigger &> /dev/null

But this means redirecting both stdout and stderr into
/dev/null because it is same as below

echo "trigger-command" >> trigger > /dev/null 2>&1

So ">> trigger" redirects stdout to trigger file, but
next "> /dev/null" redirects stdout to /dev/null again
and the last "2>/&1" redirects stderr to stdout (/dev/null)

This fixes it by "2> /dev/null". And also, since it
must fail, add "!" to echo command.

Link: http://lkml.kernel.org/r/152292052250.15769.12565292689264162435.stgit@devbox

Fixes: f06eec4d0f ("selftests: ftrace: Add inter-event hist triggers testcases")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:01 -04:00
Thomas Richter
bcbd385b61 kprobes: Fix random address output of blacklist file
File /sys/kernel/debug/kprobes/blacklist displays random addresses:

[root@s8360046 linux]# cat /sys/kernel/debug/kprobes/blacklist
0x0000000047149a90-0x00000000bfcb099a	print_type_x8
....

This breaks 'perf probe' which uses the blacklist file to prohibit
probes on certain functions by checking the address range.

Fix this by printing the correct (unhashed) address.

The file mode is read all but this is not an issue as the file
hierarchy points out:
 # ls -ld /sys/ /sys/kernel/ /sys/kernel/debug/ /sys/kernel/debug/kprobes/
	/sys/kernel/debug/kprobes/blacklist
dr-xr-xr-x 12 root root 0 Apr 19 07:56 /sys/
drwxr-xr-x  8 root root 0 Apr 19 07:56 /sys/kernel/
drwx------ 16 root root 0 Apr 19 06:56 /sys/kernel/debug/
drwxr-xr-x  2 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/
-r--r--r--  1 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/blacklist

Everything in and below /sys/kernel/debug is rwx to root only,
no group or others have access.

Background:
Directory /sys/kernel/debug/kprobes is created by debugfs_create_dir()
which sets the mode bits to rwxr-xr-x. Maybe change that to use the
parent's directory mode bits instead?

Link: http://lkml.kernel.org/r/20180419105556.86664-1-tmricht@linux.ibm.com

Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: acme@kernel.org

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:56 -04:00
Ravi Bangoria
ba16293dad tracing: Fix kernel crash while using empty filter with perf
Kernel is crashing when user tries to record 'ftrace:function' event
with empty filter:

  # perf record -e ftrace:function --filter="" ls

  # dmesg
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  Oops: 0000 [#1] SMP PTI
  ...
  RIP: 0010:ftrace_profile_set_filter+0x14b/0x2d0
  RSP: 0018:ffffa4a7c0da7d20 EFLAGS: 00010246
  RAX: ffffa4a7c0da7d64 RBX: 0000000000000000 RCX: 0000000000000006
  RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff8c48ffc968f0
  ...
  Call Trace:
   _perf_ioctl+0x54a/0x6b0
   ? rcu_all_qs+0x5/0x30
  ...

After patch:
  # perf record -e ftrace:function --filter="" ls
  failed to set filter "" on event ftrace:function with 22 (Invalid argument)

Also, if user tries to echo "" > filter, it used to throw an error.
This behavior got changed by commit 80765597bc ("tracing: Rewrite
filter logic to be simpler and faster"). This patch restores the
behavior as a side effect:

Before patch:
  # echo "" > filter
  #

After patch:
  # echo "" > filter
  bash: echo: write error: Invalid argument
  #

Link: http://lkml.kernel.org/r/20180420150758.19787-1-ravi.bangoria@linux.ibm.com

Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:55 -04:00
Steven Rostedt (VMware)
1c758a2202 tracing/x86: Update syscall trace events to handle new prefixed syscall func names
Arnaldo noticed that the latest kernel is missing the syscall event system
directory in x86. I bisected it down to d5a00528b5 ("syscalls/core,
syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()").

The system call trace events are special, as there is only one trace event
for all system calls (the raw_syscalls). But a macro that wraps the system
calls creates meta data for them that copies the name to find the system
call that maps to the system call table (the number). At boot up, it does a
kallsyms lookup of the system call table to find the function that maps to
the meta data of the system call. If it does not find a function, then that
system call is ignored.

Because the x86 system calls had "__x64_", or "__ia32_" prefixed to the
"sys" for the names, they do not match the default compare algorithm. As
this was a problem for power pc, the algorithm can be overwritten by the
architecture. The solution is to have x86 have its own algorithm to do the
compare and this brings back the system call trace events.

Link: http://lkml.kernel.org/r/20180417174128.0f3457f0@gandalf.local.home

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: d5a00528b5 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:55 -04:00
Chris Wilson
1f177a131b drm/i915: Use memset64() to align the ring with MI_NOOP
When filling the ring to align the emit pointer to the next cacheline,
use memset64() rather than open-coding it. As we know that we always
have an even number of dwords, we can replace the dword loop with the
qword equivalent.

v2: s/0/MI_NOOP<<32 | MI_NOOP/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425123718.16366-1-chris@chris-wilson.co.uk
2018-04-25 15:27:38 +01:00
Linus Walleij
fe644072df block: mq: Add some minor doc for core structs
As it came up in discussion on the mailing list that the semantic
meaning of 'blk_mq_ctx' and 'blk_mq_hw_ctx' isn't completely
obvious to everyone, let's add some minimal kerneldoc for a
starter.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Jens Axboe
e9938f552f bcache: mark Coly Li as bcache maintainer
Since Michael had to step back, Coly has agreed to be the new
maintainer. Mark him as such.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Michael Lyle
d88b6d0444 MAINTAINERS: Remove me as maintainer of bcache
Too much to do with other projects.  I've enjoyed working with everyone
here, and hope to occasionally contribute on bcache.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Luc Van Oostenryck
2bbdd81567 staging: vboxvideo: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Simon Sandström
5de3b09027 staging: pi433: break long lines in pi433_if.c
Breaks long lines in pi433_if.c, fixing checkpatch.pl warnings:
"WARNING: line over 80 characters"

Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
e71e17d3b6 staging: gdm724x: fix gdm_lte_tx()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
955ad17103 staging: rtl8723bs: fix rtw_cfg80211_monitor_if_xmit_entry()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
f42e2d6880 staging: visornic: fix visornic_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
cae9bc7d7c staging: wlan-ng: fix p80211knetdev_hard_start_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
ad8918077d staging/wilc1000: fix wilc_mac_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:49 +02:00
Ajay Singh
30ad32cd62 staging: wilc1000: updated TODO list
Removed the items from WILC1000 TODO list, which are already addressed
to keep it updated. The removed items are already taken care by
previously submitted patches.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:10 +02:00
Ajay Singh
f48a6c0622 staging: wilc1000: remove registering of ndo_do_ioctl callback
Remove registering of ndo_do_ioctl in wilc_netdev_ops structure.
As RSSI information is already avaliable through cfg80211, so remove
the IOCTL call use to fetch the same information. Wext support is not
present in the driver. Its also done to address the TODO list item
mentioned below:

"use wext-core handling instead of private SIOCSIWPRIV implementation"

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:10 +02:00
Ajay Singh
ac39f0beca staging: wilc1000: rename pu32InactiveTime to avoid camelCase issue
Avoid camelCase issues found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:17 +02:00
Ajay Singh
a448f658b8 staging: wilc1000: remove the use of goto label in wilc_spi_clear_int_ext()
Remove goto label '_fail_' used in wilc_spi_clear_int_ext(), to avoid
the label name starting with '_'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
8eb658f109 staging: wilc1000: rename goto labels starting with '_' in wilc1000_wlan_init()
Rename goto labels starting with '_' in wilc1000_wlan_init() to follow
linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
5fe678b18e staging: wilc1000: rename goto label '_fail_' linux naming convension
Rename '_fail_' goto label to have name as per linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
4b255c6e38 staging: wilc1000: remove the use of goto label in wilc_init()
Added direct return in wilc_init() instead of goto label. Changes
are done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00