The max number of hardware queues for xen/blkfront is set by parameter
'max_queues'(default 4), while it is also capped by the max value that the
xen/blkback exposes through XenStore key 'multi-queue-max-queues'.
The negotiated number is the smaller one and would be written back to xenstore
as "multi-queue-num-queues", blkback needs to read this negotiated number.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
After patch "xen/blkfront: separate per ring information out of device
info", per-ring data is protected by a per-device lock ('io_lock').
This is not a good way and will effect the scalability, so introduce a
per-ring lock ('ring_lock').
The old 'io_lock' is renamed to 'dev_lock' which protects the ->grants list and
->persistent_gnts_c which are shared by all rings.
Note that in 'blkfront_probe' the 'blkfront_info' is setup via kzalloc
so setting ->persistent_gnts_c to zero is not needed.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Preparatory patch for multiple hardware queues (rings). The number of
rings is unconditionally set to 1, larger number will be enabled in
patch "xen/blkfront: negotiate number of queues/rings to be used with backend"
so as to make review easier.
Note that blkfront_gather_backend_features does not call
blkfront_setup_indirect anymore (as that needs to be done per ring).
That means that in blkif_recover/blkif_connect we have to do it in a loop
(bounded by nr_rings).
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is needed to receive correct port
number from RAD, so MSTB could be found
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This fix is needed to support more then two
branch displays, so RAD address consist at
least of 2 elements
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We should always send reply for UP request in order
to make downstream device clean-up resources appropriately.
Issue was that reply for UP request was sent only once.
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In case broadcast message received in UP request,
RAD cannot be used to identify message originator.
Message should be parsed, originator should be found
by GUID from parsed message.
Also reply with broadcast in case broadcast message
received (for now it is always broadcast)
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The aem_rw_sensor_template and aem_ro_sensor_template structures are never
modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
You can use this to forward packets from ingress to the egress path of
the specified interface. This provides a fast path to bounce packets
from one interface to another specific destination interface.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
architectures that may support arm-smccc. It's the responsibility of the
caller to know if the SMC instruction is supported by the platform.
Reviewed-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.
This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix build warning:
scripts/recordmcount.c:589:4: warning: format not a string
literal and no format arguments [-Wformat-security]
sprintf("%s: failed\n", file);
Fixes: a50bd43935 ("ftrace/scripts: Have recordmcount copy the object file")
Link: http://lkml.kernel.org/r/1451516801-16951-1-git-send-email-colin.king@canonical.com
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org # 2.6.37+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The newly added code for Fiji creates a correct compiler warning
about invalid use of the do_div macro:
In file included from powerplay/hwmgr/ppatomctrl.c:31:0:
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h: In function 'fDivide':
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h:382:89: warning: comparison of distinct pointer types lacks a cast
do_div(longlongX, longlongY); /*Q(32,32) divided by Q(16,16) = Q(16,16) Back to original format */
do_div() divides an unsigned 64-bit number by an unsigned 32-bit number.
The code instead wants to divide two signed 64-bit numbers, which is done
using the div64_s64 function.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 770911a3cf ("drm/amd/powerplay: add/update headers for Fiji SMU and DPM")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_zeroed_page does alloc_page and returns page_address of the result;
subsequent virt_to_page will recover the page, but since the caller
needs both page and its page_address() anyway, why bother going through
that wrapper at all?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
again, it only parses the contents of the copied buffer, so
get_zeroed_page() might as well had been kmalloc(), which makes
it open-coded memdup_user_nul()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing in there gives a damn about the buffer alignment - it
just parses its contents. So the use of get_zeroed_page()
doesn't buy us anything - might as well had been kmalloc(),
which makes that code equivalent to open-coded memdup_user_nul()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Similar to memdup_user(), except that allocated buffer is one byte
longer and '\0' is stored after the copied data.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a name contains at least some characters with Unicode values
exceeding single byte, the CS0 output should have 2 bytes per character.
And if other input characters have single byte Unicode values, then
the single input byte is converted to 2 output bytes, and the length
of output becomes larger than the length of input. And if the input
name is long enough, the output length may exceed the allocated buffer
length.
All this means that conversion from UTF8 or NLS to CS0 requires
checking of output length in order to stop when it exceeds the given
output buffer size.
[JK: Make code return -ENAMETOOLONG instead of silently truncating the
name]
CC: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Split per ring information to a new structure "blkfront_ring_info".
A ring is the representation of a hardware queue, every vbd device can associate
with one or more rings depending on how many hardware queues/rings to be used.
This patch is a preparation for supporting real multi hardware queues/rings.
We also add a backpointer to 'struct blkfront_info' (dev_info) which
is not needed (we could use containers_of) but further patch
("xen/blkfront: pseudo support for multi hardware queues/rings")
will make allocation of 'blkfront_ring_info' dynamic.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Document the multi-queue/ring feature in terms of XenStore keys to be written by
the backend and by the frontend.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
udf_CS0toUTF8 function stops the conversion when the output buffer
length reaches UDF_NAME_LEN-2, which is correct maximum name length,
but, when checking, it leaves the space for a single byte only,
while multi-bytes output characters can take more space, causing
buffer overflow.
Similar error exists in udf_CS0toNLS function, that restricts
the output length to UDF_NAME_LEN, while actual maximum allowed
length is UDF_NAME_LEN-2.
In these cases the output can override not only the current buffer
length field, causing corruption of the name buffer itself, but also
following allocation structures, causing kernel crash.
Adjust the output length checks in both functions to prevent buffer
overruns in case of multi-bytes UTF8 or NLS characters.
CC: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix the checkpatch warning of alignment should match open
parenthesis.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace bit shifting on 1 with the BIT(x) macro
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
On a cancelled suspend the vcpu_info location does not change (it's
still in the per-cpu area registered by xen_vcpu_setup()). So do not
call xen_hvm_init_shared_info() which would make the kernel think its
back in the shared info. With the wrong vcpu_info, events cannot be
received and the domain will hang after a cancelled suspend.
Signed-off-by: Charles Ouyang <ouyangzhaowei@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Ran into this on UML:
drivers/built-in.o: In function `vf610_adc_probe':
drivers/iio/adc/vf610_adc.c:744: undefined reference to `devm_ioremap_resource'
devm_ioremap_resource() is defined only when HAS_IOMEM is selected.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ran into this on UML:
drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’:
drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration]
iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ConfigFS lacked binary attributes up until now. This patch
introduces support for binary attributes in a somewhat similar
manner of sysfs binary attributes albeit with changes that
fit the configfs usage model.
Problems that configfs binary attributes fix are everything that
requires a binary blob as part of the configuration of a resource,
such as bitstream loading for FPGAs, DTBs for dynamically created
devices etc.
Look at Documentation/filesystems/configfs/configfs.txt for internals
and howto use them.
This patch is against linux-next as of today that contains
Christoph's configfs rework.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[hch: folded a fix from Geert Uytterhoeven <geert+renesas@glider.be>]
[hch: a few tiny updates based on review feedback]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The VMSA field of MMFR0 (bottom 4 bits) is incremented for each
added feature. PXN is supported if the value is >= 4 and LPAE
is supported if it is >= 5.
In case a kernel with CONFIG_ARM_LPAE disabled is used on a
processor that supports LPAE, we can still use PXN in short
descriptors. So check for >= 4 not == 4.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This fixes a regression with device tree based booting compared to legacy booting for n900 to make the n900 legacy user space to also work with device tree based booting
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
