Otherwise, some unexpected PCIE AER errors will be observed
in runtime suspend/resume cycle.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't
support programmable degamma curve anywhere. Currently, a custom degamma is
accepted by DM but just ignored by DCE driver and degamma correction isn't
actually applied. There is no way to map custom degamma in DCE, therefore, DRM
CRTC degamma property shouldn't be enabled for DCE drivers.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY?]
Max number of lines that can be used for prefetch due to type constraints is
63.75.
[HOW?]
Enforce maximum prefetch lines as 63.75.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
DCN32 uses fclk pstate watermarks for dummy pstate, and must always be
supported.
[HOW?]
Validation needs to be run with fclk pstate latency set
as the dummy pstate latency to get correct prefetch and bandwidth outputs.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Prefetch calculation loop was not exiting until utilizing all of vstartup if it
failed once. Locals need to be reset on each iteration of the loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]
[How]
Use optc1_configure_crc() directly
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
[Why]
The cursor size (in memory) is currently incorrectly calculated,
resulting not enough CAB being allocated for static screen cursor
in MALL refresh. This results in cursor image corruption.
[How]
Use cursor pitch instead of cursor width when calculating cursor size.
Update num cache lines calculation to use the result of the cursor size
calculation instead of manually recalculating again.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
This reverts commit 981f092956.
It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.
Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr
[Why]
For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM
info struct. We should read and override the VRAM info in driver with
values provided by VBIOS to support memory downbin cases.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e49 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Why]
Some DPIA AUX replies have incorrect data length from original request.
This could lead to overwriting of destination buffer if reply length is
larger, which could cause invalid access to stack since many destination
buffers are declared as local variables.
[How]
Check for invalid length from DPIA AUX replies and trigger a retry if
reply length is not the same as original request. A DRM_WARN() dmesg log
is also produced.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
TA firmware loaded on psp v13_0_10, but it is missing in modinfo.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On IGT, there is a test named amd_hotplug, and when the subtest basic is
executed on DCN31, we get the following error:
[drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [PLANE:59:plane-3] commit wait timed out
After enable the page flip log with the below command:
echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control
It is possible to see that the flip was submitted, but DC never replied
back, which generates time-out issues. This is an indication that the
HUBP surface flip is missing. This commit fixes this issue by adding
hubp1_set_flip_int to DCN31.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Since introduction of patch "Query DPIA HPD status.", link detection at
boot could be accessing DPIA AUX, which will not succeed until
DMUB outbox messaging is enabled and results in below dmesg logs:
[ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout!
[How]
Enable DMUB outbox messaging before link detection at boot time.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
When p->gang_size equals 0, amdgpu_cs_pass1() will return directly
without freeing chunk_array, which will cause a memory leak issue,
this patch fixes it.
Fixes: 4624459c84 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For queueing packets in XDP we want to add a new redirect map type with
support for 64-bit indexes. To prepare fore this, expand the width of the
'key' argument to the bpf_redirect_map() helper. Since BPF registers are
always 64-bit, this should be safe to do after the fact.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221108140601.149971-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the received_rps counter value next to the other RPS-related members
in softnet_data. This closes two four-byte holes in the structure, making
room for another pointer in the first two cache lines without bumping the
xmit struct to its own line.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221108140601.149971-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the dodgy maths in netfs_rreq_unlock_folios(). start_page could be
inside the folio, in which case the calculation of pgpos will be come up
with a negative number (though for the moment rreq->start is rounded down
earlier and folios would have to get merged whilst locked)
Alter how this works to just frame the tracking in terms of absolute file
positions, rather than offsets from the start of the I/O request. This
simplifies the maths and makes it easier to follow.
Fix the issue by using folio_pos() and folio_size() to calculate the end
position of the page.
Fixes: 3d3c950467 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/Y2SJw7w1IsIik3nb@casper.infradead.org/
Link: https://lore.kernel.org/r/166757988611.950645.7626959069846893164.stgit@warthog.procyon.org.uk/ # v2
netfslib has a number of places in which it performs iteration of an xarray
whilst being under the RCU read lock. It *should* call xas_retry() as the
first thing inside of the loop and do "continue" if it returns true in case
the xarray walker passed out a special value indicating that the walk needs
to be redone from the root[*].
Fix this by adding the missing retry checks.
[*] I wonder if this should be done inside xas_find(), xas_next_node() and
suchlike, but I'm told that's not an simple change to effect.
This can cause an oops like that below. Note the faulting address - this
is an internal value (|0x2) returned from xarray.
BUG: kernel NULL pointer dereference, address: 0000000000000402
...
RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs]
...
Call Trace:
netfs_rreq_assess+0xa6/0x240 [netfs]
netfs_readpage+0x173/0x3b0 [netfs]
? init_wait_var_entry+0x50/0x50
filemap_read_page+0x33/0xf0
filemap_get_pages+0x2f2/0x3f0
filemap_read+0xaa/0x320
? do_filp_open+0xb2/0x150
? rmqueue+0x3be/0xe10
ceph_read_iter+0x1fe/0x680 [ceph]
? new_sync_read+0x115/0x1a0
new_sync_read+0x115/0x1a0
vfs_read+0xf3/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Changes:
========
ver #2)
- Changed an unsigned int to a size_t to reduce the likelihood of an
overflow as per Willy's suggestion.
- Added an additional patch to fix the maths.
Fixes: 3d3c950467 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: George Law <glaw@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/166749229733.107206.17482609105741691452.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/166757987929.950645.12595273010425381286.stgit@warthog.procyon.org.uk/ # v2
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal and type-cover HID devices
(including sensors, touchpad, keyboard, and other miscellaneous devices)
on the Surface Pro 9.
This does not include support for a tablet-mode switch yet, as that is
now handled via the POS subsystem (unlike the Surface Pro 8, where it is
handled via the KIP subsystem) and therefore needs further changes.
While we're at it, also add the missing comment for the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, we check any received packet whether we have already seen it
previously, regardless of the packet type (sequenced / unsequenced). We
do this by checking the sequence number. This assumes that sequence
numbers are valid for both sequenced and unsequenced packets. However,
this assumption appears to be incorrect.
On some devices, the sequence number field of unsequenced packets (in
particular HID input events on the Surface Pro 9) is always zero. As a
result, the current retransmission check kicks in and discards all but
the first unsequenced packet, breaking (among other things) keyboard and
touchpad input.
Note that we have, so far, only seen packets being retransmitted in
sequenced communication. In particular, this happens when there is an
ACK timeout, causing the EC (or us) to re-send the packet waiting for an
ACK. Arguably, retransmission / duplication of unsequenced packets
should not be an issue as there is no logical condition (such as an ACK
timeout) to determine when a packet should be sent again.
Therefore, remove the retransmission check for unsequenced packets
entirely to resolve the issue.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models
the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE
through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK
(these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
btrfs_ioctl_get_subvol_info() frees the search path after the userspace
copy from the temp buffer @subvol_info. This can lead to a lock splat
warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ioctl_ino_to_path() frees the search path after the userspace copy
from the temp buffer @ipath->fspath. Which potentially can lead to a lock
splat warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ioctl_logical_to_ino() frees the search path after the userspace
copy from the temp buffer @inodes. Which potentially can lead to a lock
splat.
Fix this by freeing the path before we copy @inodes to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Previously, the s2idle quirk was only active for the 21A0 machine type
of the P14s Gen2a product. This also enables it for the second 21A1 type,
thus reducing wake-up times from s2idle.
Signed-off-by: Lennard Gäher <gaeher@mpi-sws.org>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2181
Link: https://lore.kernel.org/r/20221108072023.17069-1-gaeher@mpi-sws.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add new a new ACPI ID AMDI0009 used by upcoming AMD platform to the pmc
supported list of devices.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221109083346.361603-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver was renamed before application but the relevant change did
not propagate to the MAINTAINERS patch that was applied. Repair it.
CC: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-5-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Emil looks after the downstream StarFive stuff, and agreed to look after
the upstream ones too.
CC: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20221109212219.1598355-4-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These drivers work on our other FPGAs, for example the non-SoC PolarFire
connected to an FU-540 via chiplink. Make the entry a wee bit more
generic to match. While at it, remove the / from the heading so that it
matches other, neighbouring RISC-V entries.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-3-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Following some discussion both on & off list, I have volunteered to take
over maintaining the miscellaneous RISC-V devicetrees & soc drivers from
Palmer to ease his load.
So far only SiFive and Microchip have stuff in drivers/soc. For the
former, a SiFive entry exists with a dead GitHub repo - so remove that
to avoid confusion since the patches for drivers/soc & devicetrees will
be routed via my tree & other drivers go through their subsystem trees.
The Microchip directory only contains a RISC-V driver for now, but is
likely to contain drivers for other archs in the future. To that end,
change the PolarFire SoC entry to specifically mention the RISC-V driver
& the new directory level entry does not mention an architecture.
CC: Arnd Bergmann <arnd@arndb.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Palmer Dabbelt <palmer@dabbelt.com>
Link: https://lore.kernel.org/linux-riscv/mhng-e4210f56-fcc3-4db8-abdb-d43b3ebe695d@palmer-ri-x1c9a/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-2-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When I2C_HID_OF_ELAN is set, we need to turn on I2C_HID_CORE to
ensure we get all the HID requirements.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free.
Fixes: b6f85ef953 ("drbd: Iterate over all connections")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit bfea9a8574 ("bpf: Add name to struct bpf_ksym"), when
reporting subprog ksymbol to perf, prog name instead of subprog name is
used. The backtrace of bpf program with subprogs will be incorrect as
shown below:
ffffffffc02deace bpf_prog_e44a3057dcb151f8_overwrite+0x66
ffffffffc02de9f7 bpf_prog_e44a3057dcb151f8_overwrite+0x9f
ffffffffa71d8d4e trace_call_bpf+0xce
ffffffffa71c2938 perf_call_bpf_enter.isra.0+0x48
overwrite is the entry program and it invokes the overwrite_htab subprog
through bpf_loop, but in above backtrace, overwrite program just jumps
inside itself.
Fixing it by using subprog name when reporting subprog ksymbol. After
the fix, the output of perf script will be correct as shown below:
ffffffffc031aad2 bpf_prog_37c0bec7d7c764a4_overwrite_htab+0x66
ffffffffc031a9e7 bpf_prog_c7eb827ef4f23e71_overwrite+0x9f
ffffffffa3dd8d4e trace_call_bpf+0xce
ffffffffa3dc2938 perf_call_bpf_enter.isra.0+0x48
Fixes: bfea9a8574 ("bpf: Add name to struct bpf_ksym")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20221114095733.158588-1-houtao@huaweicloud.com
This change documents the process for running the BPF CI before
submitting a patch to the upstream mailing list, similar to what happens
if a patch is send to bpf@vger.kernel.org: it builds kernel and
selftests and runs the latter on different architecture (but it notably
does not cover stylistic checks such as cover letter verification).
Running BPF CI this way can help achieve better test coverage ahead of
patch submission than merely running locally (say, using
tools/testing/selftests/bpf/vmtest.sh), as additional architectures may
be covered as well.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221114211501.2068684-1-deso@posteo.net
This patch fixes a frame size warning, reported by kernel test robot.
>> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is
>> larger than 1024 bytes [-Wframe-larger-than=]
The getapptrust part of dcbnl_ieee_fill is moved to a separate function,
and the selector array is now dynamically allocated, instead of stack
allocated.
Tested on microchip sparx5 driver.
Fixes: 6182d5875c ("net: dcb: add new apptrust attribute")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It turned out that not the last IB specified is the gang leader,
but instead the last job allocated.
This is a bit unfortunate and not very intuitive for the CS
interface, so try to fix this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115094206.6181-1-christian.koenig@amd.com
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 4624459c84 ("drm/amdgpu: add gang submit frontend v6")
When doing a nowait buffered write we can trigger the following assertion:
[11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658
[11138.438251] ------------[ cut here ]------------
[11138.438254] kernel BUG at fs/btrfs/messages.c:259!
[11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1
[11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
[11138.443583] Code: 5b 41 5a 41 (...)
[11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246
[11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000
[11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff
[11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001
[11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000
[11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000
[11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000
[11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0
[11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[11138.455779] Call Trace:
[11138.456211] <TASK>
[11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs]
[11138.457827] ? kmem_cache_alloc+0x18d/0x2a0
[11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs]
[11138.459407] csum_exist_in_range+0x56/0x110 [btrfs]
[11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs]
[11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs]
[11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs]
[11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs]
[11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs]
[11138.463982] ? lock_release+0x153/0x4a0
[11138.464347] io_write+0x11b/0x570
[11138.464660] ? lock_release+0x153/0x4a0
[11138.465213] ? lock_is_held_type+0xe8/0x140
[11138.466003] io_issue_sqe+0x63/0x4a0
[11138.466339] io_submit_sqes+0x238/0x770
[11138.466741] __do_sys_io_uring_enter+0x37b/0xb10
[11138.467206] ? lock_is_held_type+0xe8/0x140
[11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50
[11138.468688] do_syscall_64+0x38/0x90
[11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[11138.470017] RIP: 0033:0x7f1438c539e6
This is because to check if we can NOCOW, we check that if we can NOCOW
into an extent (it's prealloc extent or the inode has NOCOW attribute),
and then check if there are csums for the extent's range in the csum tree.
The search may leave us beyond the last slot of a leaf, and then when
we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a
time_seq of 0.
This triggers a failure of the first assertion at btrfs_next_old_leaf(),
since we have a nowait path. With assertions disabled, we simply don't
respect the NOWAIT semantics, allowing the write to block on locks or
blocking on IO for reading an extent buffer from disk.
Fix this by:
1) Triggering the assertion only if time_seq is not 0, which means that
search is being done by a tree mod log user, and in the buffered and
direct IO write paths we don't use the tree mod log;
2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to
lock an extent buffer should return immediately and not retry the
search, as well as if we need to do IO to read an extent buffer from
disk.
Fixes: c922b016f3 ("btrfs: assert nowait mode is not used for some btree search functions")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The secure update driver depends on the firmware-upload functionality of
the firmware-loader. The firmware-loader is carried in the firmware-class
driver which is enabled with the tristate CONFIG_FW_LOADER option. The
firmware-upload functionality is included in the firmware-class driver if
the bool FW_UPLOAD config is set.
The current dependency statement, "depends on FW_UPLOAD", is not adequate
because it does not implicitly turn on FW_LOADER. Instead of adding a
dependency, follow the convention used by drivers that require the
FW_LOADER_USER_HELPER functionality of the firmware-loader by using
select for both FW_LOADER and FW_UPLOAD.
Fixes: bdf86d0e6c ("fpga: m10bmc-sec: create max10 bmc secure update")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221115001127.289890-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.
To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.
When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.
In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.
Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.
[1]
unreferenced object 0xffff8881f6771200 (size 256):
comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
hex dump (first 32 bytes):
00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000012819ac>] vlan_vid_add+0x437/0x750
[<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
[<000000000632b56f>] br_changelink+0x3d6/0x13f0
[<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
[<00000000f6276baf>] rtnl_newlink+0x5f/0x90
[<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
[<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
[<0000000010588814>] netlink_unicast+0x438/0x710
[<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
[<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
[<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
[<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
[<00000000684f7e25>] __sys_sendmsg+0xab/0x130
[<000000004538b104>] do_syscall_64+0x3d/0x90
[<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 279737939a ("net: bridge: Fix VLANs memory leak")
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hao Lan says:
====================
net: hns3: This series bugfix for the HNS3 ethernet driver.
This series includes some bugfix for the HNS3 ethernet driver.
Patch 1# fix incorrect hw rss hash type of rx packet.
Fixes: 796640778c ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea48586707 ("net: hns3: handle the BD info on the last BD of the packet")
Patch 2# fix return value check bug of rx copybreak.
Fixes: e74a726da2 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f ("net: hns3: use bounce buffer when rx page can not be reused")
Patch 3# net: hns3: fix setting incorrect phy link ksettings
for firmware in resetting process
Fixes: f5f2b3e4dc ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cbb1 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050f4 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
====================
Link: https://lore.kernel.org/r/20221114082048.49450-1-lanhao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as
driver did not update phy link ksettings after initialization process or
not update advertising when getting phy link ksettings from firmware, it
may set incorrect phy link ksettings for firmware in resetting process.
So fix it.
Fixes: f5f2b3e4dc ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cbb1 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050f4 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.
Fixes: e74a726da2 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.
Fixes: 796640778c ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea48586707 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sleep time is added to ensure the phy to be ready after loopback
bit was set. This to prevent the phy loopback test from failing.
Fixes: 020a45aff1 ("net: phy: marvell: add Marvell specific PHY loopback")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com>
Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
