I cannot speak on behalf of the batman-adv developers due to conflicts
in the opinion about the ongoing development. The batman-adv module is
still maintained by Marek Lindner and Simon Wunderlich. Those are the
main persons behind the visions of batman-adv. Therefore, the state of
module hasn't changed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert to current logging styles.
Move code blocks to eliminate need for prototypes.
Use tabs for code indent and standardize spacing.
Comment neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Already declared in 8390.h
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make more conformant to normal kernel style.
Long line lengths > 80 columns ignored.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the braces around to conform to kernel standard style.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the current logging styles.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use current logging styles.
Other miscellaneous cleanups:
Space removal and additions for checkpatch warnings.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert to current logging styles.
Move code blocks to eliminate need for prototypes.
Use tabs for code indent and sandardize spacing.
Comment neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is intended to assert (when DEBUG is defined) that the
skb header area includes the header fields it's looking at, which RFS
should already have pulled. But it uses pskb_may_pull(), which will
attempt to pull more data if necesary. It must instead compare
skb_headlen() with the required length.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
There are certain hardware bugs that may occur on Falcon during normal
operation, that require a reset to recover from. We try to minimise
disruption by keeping the PHY running, following a reset sequence
labelled as 'invisible'.
Siena does not suffer from these hardware bugs, so we have not
implemented an 'invisible' reset sequence. However, if a similar
error does occur (due to a hardware fault or software bug) then the
code shared with Falcon will wrongly assume that the PHY is not being
reset.
Since the mapping of reset reasons (internal) and flags (ethtool) to
methods must differ significantly between NIC types, move it into
per-NIC-type functions (replacing the insufficient reset_world_flags
field).
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Currently an attempt to schedule any reset is ignored if a reset
is already pending. This ignores the relative scopes - if the
requested reset is greater in scope then the scheduled reset should
be upgraded accordingly.
There are also some race conditions which could lead to a reset
request being lost. Deal with them by using atomic operations on a
bitmask. This also makes tests on reset_pending easier to get right.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
efx_filter_remove_filter() fails to remove inserted filters in some cases.
For example:
1. Two filters A and B have specifications that result in an initial
hash collision.
2. A is inserted first, followed by B.
3. An attempt to remove B first succeeds, but if A is removed first
a subsequent attempt to remove B fails.
When searching for an existing filter (!for_insert),
efx_filter_search() must always continue to the maximum search depth
for the given type rather than stopping at the first unused entry.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
... instead of just failing with -EINVAL
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if cifs_get_root() fails, we end up with ->mount() returning NULL,
which is not what callers expect. Moreover, in case of superblock
reuse we end up leaking a superblock reference...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
have ->s_fs_info set by the set() callback passed to sget()
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all callers of cifs_umount() proceed to do the same thing; pull it into
cifs_umount() itself.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
instead of calling it manually in case if cifs_read_super() fails
to set ->s_root, just call it from ->kill_sb(). cifs_put_super()
is gone now *and* we have cifs_sb shutdown and destruction done
after the superblock is gone from ->s_instances.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... to the point prior to sget(). Now we have cifs_sb set up early
enough.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) superblock argument is unused
b) it always returns 0
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
no need to wait until cifs_read_super() and we need it done
by the time cifs_mount() will be called.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pull mountdata allocation up, so that it won't stand in the way when
we lift cifs_mount() to location before sget().
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
cifs_sb and nls end up leaked...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To close sget() races we'll need to be able to set cifs_sb up before
we get the superblock, so we'll want to be able to do cifs_mount()
earlier. Fortunately, it's easy to do - setting ->s_maxbytes can
be done in cifs_read_super(), ditto for ->s_time_gran and as for
putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags
until cifs_read_super() is called. Kill unused 'devname' argument,
while we are at it...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if cifs_sb allocation fails, we still need to drop nls we'd stashed
into volume_info - the one we would've copied to cifs_sb if we could
allocate the latter.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if we get to out_super with ->s_root already set (e.g. with
cifs_get_root() failure), we'll end up with cifs_put_super()
called and ->mountdata freed twice. We'll also get cifs_sb
freed twice and cifs_sb->local_nls dropped twice. The problem
is, we can get to out_super both with and without ->s_root,
which makes ->put_super() a bad place for such work.
Switch to ->kill_sb(), have all that work done there after
kill_anon_super(). Unlike ->put_super(), ->kill_sb() is
called by deactivate_locked_super() whether we have ->s_root
or not.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Simplifies the creation of connection protocol messages by eliminating
the passing of information that is no longer required, is constant,
or is contained within the port structure that is issuing the message.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Modifies the logic that creates a connection termination payload
message so that it no longer (mis)uses a routine that creates a
connection protocol message. The revised code is now more easily
understood, and avoids setting several fields that are either not
present in payload messages or were being set more than once.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Restructures the logic used in tipc_port_recv_proto_msg() to ensure
that incoming connection protocol messages are handled properly. The
routine now uses a two-stage process that first ensures the message
applies on an existing connection and then processes the request.
This corrects a loophole that allowed a connection probe request to
be processed if it was sent to an unconnected port that had no names
bound to it.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Speeds up the creation of the FIN message that terminates a TIPC
connection. The typical peer termination message is now created by
duplicating the terminating port's standard payload message header
and adjusting the message size, importance, and error code fields,
rather than building all fields of the message from scratch. A FIN
message that is directed to the port itself is created the same way.
but also requires swapping the origin and destination address fields.
In addition to reducing the work required to create FIN messages,
these changes eliminate several instances of duplicated code,
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Performs cosmetic cleanup of the symbolic names used to specify TIPC
payload message header sizes. The revised names now more accurately
reflect the payload messages in which they can appear. In addition,
several places where these payload message symbol names were being used
to create non-payload messages have been updated to use the proper
internal message symbolic name.
No functional changes are introduced by this rework.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Gets rid of code that allows tipc_msg_init() to create a short
payload message header. This optimization is possible because
there are no longer any callers who require this capability.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Eliminates a pair of #include statements for files that are brought in
automatically by including core.h.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Gets rid of counter that records the number of times a bearer has
resumed after congestion or blocking, since the value is never
referenced anywhere.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fixes a minor error in the title of one of the message size profiling
values printed as part of TIPC's link statistics.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Gets rid of a pair of checks to see if a name sequence entry in
TIPC's name table has an empty zone list. These checks are pointless
since the zone list can never be empty (i.e. as soon as the list
becomes empty the associated name sequence entry is deleted).
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Modifies the main circular linked lists of publications used in TIPC's
name table to use the standard kernel linked list type. This change
simplifies the deletion of an existing publication by eliminating
the need to search up to three lists to locate the publication.
The use of standard list routines also helps improve the readability
of the name table code by make it clearer what each list operation
being performed is actually doing.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Modifies the name table array structure that contains the name
sequence instances for a given name type so that the publication
lists associated with a given instance are stored in a dynamically
allocated structure, rather than being embedded within the array
entry itself. This change is being done for several reasons:
1) It reduces the amount of data that needs to be copied whenever
a given array is expanded or contracted to accommodate the first
publication of a new name sequence or the removal of the last
publication of an existing name sequence.
2) It reduces the amount of memory associated with array entries that
are currently unused.
3) It facilitates the upcoming conversion of the publication lists
from TIPC-specific circular lists to standard kernel lists. (Standard
lists cannot be used with the former array structure because the
relocation of array entries during array expansion and contraction
would corrupt the lists.)
Note that, aside from introducing a small amount of code to dynamically
allocate and free the structure that now holds publication list info,
this change is largely a simple renaming exercise that replaces
references to "sseq->LIST" with "sseq->info->LIST" (or "info->LIST").
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Gets rid of unnecessary masking in two routines that set TIPC message
header fields. (The msg_set_bits() routine already takes care of
masking the new value to the correct size.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Gets rid of a pair of routines that provide support for temporarily
caching the destination node for a message in the associated message
buffer's application handle, since this capability is no longer used.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Optimizes the creation of a returned payload message by duplicating
the original message and then updating the small number of fields
that need to be adjusted, rather than building the new message header
from scratch. In addition, certain operations that are not always
required are relocated so that they are only done if needed.
These optimizations also have the effect of addressing other issues
that were present previously:
1) Fixes a bug that caused the socket send routines to return the
size of the returned message, rather than the size of the sent
message, when a returnable payload message was sent to a non-existent
destination port.
2) The message header of the returned message now matches that of
the original message more closely. The header is now always the same
size as the original header, and some message header fields that
weren't being initialized in the returned message header are now
populated correctly -- namely the "d" and "s" bits, and the upper
bound of a multicast name instance (where present).
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reduces the work involved in transmitting a returned payload message
by doing only the work necessary to route such a message directly to
the specified destination port, rather than invoking the code used
to route an arbitrary message to an arbitrary destination.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Introduces an internal sanity check to ensure that the only undeliverable
messages TIPC attempts to return to their origin are application payload
messages.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Modifies the routine that handles the rejection of payload messages
so that it has a single exit point that frees up the rejected message,
thereby eliminating some duplicated code.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
