Commit graph

277,199 commits

Author SHA1 Message Date
Greg Kroah-Hartman
845d131e2b Staging: comedi: add #include <linux/io.h> to a bunch of drivers
On some arches the function virt_to_bus() wasn't being pulled in due to
include chains being different.  So, as we are explicitly calling this
function, explicitly include the proper header file so all will build
properly.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-09 12:20:28 -07:00
Greg Kroah-Hartman
408093d2a1 Staging: comedi: drivers.c: fix PAGE_KERNEL_NOCACHE issue
Not all arches have PAGE_KERNEL_NOCACHE, so use the "normal" PAGE_KERNEL
on those that do not have it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-09 12:13:53 -07:00
Tejun Heo
fdd514e16b block: make disk_block_events() properly wait for work cancellation
disk_block_events() should guarantee that the event work is not in
flight on return and once blocked it shouldn't issue further
cancellations.

Because there was no synchronization between the first blocker doing
cancel_delayed_work_sync() and the following blockers, the following
blockers could finish before cancellation was complete, which broke
both guarantees - event work could be in flight and cancellation could
happen after return.

This bug triggered WARN_ON_ONCE() in disk_clear_events() reported in
bug#34662.

  https://bugzilla.kernel.org/show_bug.cgi?id=34662

Fix it by adding an outer mutex which protects both block count
manipulation and work cancellation.

-v2: Use outer mutex instead of bit waitqueue per Linus.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:59 +02:00
Tejun Heo
c3af54afba block: remove non-syncing __disk_block_events() and fold it into disk_block_events()
After the previous update to disk_check_events(), nobody is using
non-syncing __disk_block_events().  Remove @sync and, as this makes
__disk_block_events() virtually identical to disk_block_events(),
remove the underscore prefixed version.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:55 +02:00
Tejun Heo
a9dce2a3b4 block: don't use non-syncing event blocking in disk_check_events()
This patch is part of fix for triggering of WARN_ON_ONCE() in
disk_clear_events() reported in bug#34662.

  https://bugzilla.kernel.org/show_bug.cgi?id=34662

disk_clear_events() blocks events, schedules and flushes the event
work.  It expects the work to have started execution on schedule and
finished on return from flush.  WARN_ON_ONCE() triggers if the event
work hasn't executed as expected.  This problem happens because
__disk_block_events() fails to guarantee that the event work item is
not in flight on return from the function in race-free manner.  The
problem is two-fold and this patch addresses one of them.

When __disk_block_events() is called with @sync == %false, it bumps
event block count, calls cancel_delayed_work() and return.  This makes
it impossible to guarantee that event polling is not in flight on
return from syncing __disk_block_events() - if the first blocker was
non-syncing, polling could still be in progress and later syncing ones
would assume that the first blocker already canceled it.

Making __disk_block_events() cancel_sync regardless of block count
isn't feasible either as it may race with forced event checking in
disk_clear_events().

As disk_check_events() is the only user of non-syncing
__disk_block_events(), updating it to directly cancel and schedule
event work is the easiest way to solve the issue.

Note that there's another bug in __disk_block_events() and this patch
doesn't fix the issue completely.  Later patch will fix the other bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:54 +02:00
Chris Wilson
a8198eea15 drm/i915: Introduce i915_gem_object_finish_gpu()
... reincarnated from i915_gem_object_flush_gpu(). The semantic
difference is that after calling finish_gpu() the object no longer
resides in any GPU domain, and so will cause the GPU caches to be
invalidated if it is ever used again.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-06-09 11:43:47 -07:00
Grant Likely
e4c8308c85 Merge branch 'ep93xx-dma' into spi/next 2011-06-09 12:42:57 -06:00
Marek Lindner
ecbd532108 batman-adv: use NO_FLAGS define instead of hard-coding 0
The definition NO_FLAGS was introduced to make the code more
readable and shall be used to initialize flag fields.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
e8958dbf0d batman-adv: Use enums for related constants
CodingStyle "Chapter 12: Macros, Enums and RTL" recommends to use enums
for several related constants. Internal states can be used without
defining the actual value, but all values which are visible to the
outside must be defined as before. Normal values are assigned as usual
and flags are defined by shifts of a bit.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
3d222bbaa7 batman-adv: Rewrite debugfs kobj_to_* helpers as functions
CodingStyle "Chapter 12: Macros, Enums and RTL" highly recommends to use
functions instead of macros were possible. This ensures type safety and
prevents shadowing of other variables.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
e72948eb21 batman-adv: Fix signedness problem in parse_gw_bandwidth
strict_strtoul as used in parse_gw_bandwidth is defined for unsigned
long and strict_strtol should be used instead for long.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
6b9aadfa97 batman-adv: Don't return value in void function
gw_node_delete is defined with "void" as return type, but still tries to
return a value. The called function gw_node_delete is also return as
void and thus doesn't provide a value for us.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Daniele Furlan
d1829fa0c3 batman-adv: accept delayed rebroadcasts to avoid bogus routing under heavy load
When a link is saturated (re)broadcasts of OGMs are delayed. Under heavy
load this delay may exceed the orig interval which leads to OGMs being
dropped (the code would only accept an OGM rebroadcast if it arrived
before the next OGM was broadcasted). With this patch batman-adv will
also accept delayed OGMs in order to avoid a bogus influence on the
routing metric.

Signed-off-by: Daniele Furlan <daniele.furlan@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:37 +02:00
Grant Likely
ab1c847af5 gpio/ep93xx: Remove superfluous debug pr_info statement
Reported-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-09 12:40:21 -06:00
Ville Tervo
6de6c18d8d Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devices
Some old hci controllers do not accept any mask so leave the
default mask on for these devices.

< HCI Command: Set Event Mask (0x03|0x0001) plen 8
    Mask: 0xfffffbff00000000
> HCI Event: Command Complete (0x0e) plen 4
    Set Event Mask (0x03|0x0001) ncmd 1
    status 0x12
    Error: Invalid HCI Command Parameters

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Tested-by: Corey Boyle <corey@kansanian.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 15:30:02 -03:00
Filip Palian
8d03e971cf Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.
Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding
byte each. This byte in "cinfo" is copied to userspace uninitialized.

Signed-off-by: Filip Palian <filip.palian@pjwstk.edu.pl>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 15:30:01 -03:00
David Miller
0b28d73735 Bluetooth: Do not ignore errors returned from strict_strtol()
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 15:30:01 -03:00
Luiz Augusto von Dentz
4a77708b05 Bluetooth: fix shutdown on SCO sockets
shutdown should wait for SCO link to be properly disconnected before
detroying the socket, otherwise an application using the socket may
assume link is properly disconnected before it really happens which
can be a problem when e.g synchronizing profile switch.

Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 15:30:01 -03:00
Stephen Boyd
d0fad89da9 Bluetooth: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following
warning:

In function 'copy_from_user',
    inlined from 'rfcomm_sock_setsockopt' at
    net/bluetooth/rfcomm/sock.c:705:
arch/x86/include/asm/uaccess_64.h:65:
warning: call to 'copy_from_user_overflow' declared with
attribute warning: copy_from_user() buffer size is not provably
correct

presumably due to buf_size being signed causing GCC to fail to
see that buf_size can't become negative.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 15:30:01 -03:00
Liam Girdwood
91d5e6b4f5 ASoC: pcm - rename snd_codec_close() to snd_pcm_close().
Make sure we follow naming convention for all PCM ops.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 19:29:35 +01:00
Liam Girdwood
b8c0dab9bf ASoC: core - PCM mutex per rtd
In preparation for the new ASoC Dynamic PCM support (AKA DSP support).

The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed
at runtime between the PCM device end (or Frontend - FE) and the physical DAI
(Backend - BE) using regular kcontrols (just like a hardware CODEC routes
audio in the analog domain). The Dynamic PCM core therefore must be
able to call PCM operations for both the Frontend and Backend(s) DAIs at
the same time.

Currently we have a global pcm_mutex that is used to serialise
the ASoC PCM operations. This patch removes the global mutex
and adds a mutex per RTD allowing the PCM operations to be reentrant and
allow control of more than one DAI at at time. e.g. a frontend PCM hw_params()
could configure multiple backend DAI hw_params() with similar or different
hw parameters at the same time.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 19:29:29 +01:00
John W. Linville
e23535ca11 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem 2011-06-09 14:23:30 -04:00
Mark Brown
7d51a0dbe5 regulator: Add rdev_crit() macro
No actual users but provide the macro so there's less surprise when it's
not there.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-06-09 19:14:35 +01:00
Mark Brown
3801b86aa4 regulator: Refactor supply implementation to work as regular consumers
Currently the regulator supply implementation is somewhat complex and
fragile as it doesn't look like standard consumers but is instead a
parallel implementation. This causes issues with locking and reference
counting.

Move the implementation over to using standard consumers to address this.
Rather than only notifying the supply on the first enable/disable we do so
every time the regulator is enabled or disabled, simplifying locking as we
don't need to hold a lock on the consumer we are about to enable.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-06-09 19:14:34 +01:00
Mark Brown
e0eaedefda regulator: Include the device name in the microamps_requested_ file
We may have multiple devices requesting a supply with the same name so
include the device name in the generated filename for microamps_requested
to avoid duplicate files.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-06-09 19:14:29 +01:00
Mark Brown
f5726ae33c regulator: Increase the limit on sysfs file names
With verbose filenames we can easily hit 32 characters.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-06-09 19:14:29 +01:00
Arnaud Lacombe
edfc86aada dtc: regen parser
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:47 -04:00
Arnaud Lacombe
95abef888a dtc: migrate parser to implicit rules
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:46 -04:00
Arnaud Lacombe
2f76b358f9 kconfig: regen parser
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:45 -04:00
Arnaud Lacombe
378dbb2cf5 kconfig: migrate parser to implicit rules
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:44 -04:00
Arnaud Lacombe
674eed8a6a kconfig/zconf.l: do not ask to generate backup
This avoids the creation of a top-level `lex.backup' when the lexer gets
re-generated.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:44 -04:00
Arnaud Lacombe
b96a0d0c78 kconfig: kill no longer needed reference to YYDEBUG
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:43 -04:00
Arnaud Lacombe
61f956f576 kconfig: constify `kconf_id_lookup'
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:42 -04:00
Arnaud Lacombe
58ef81c5cf genksym: regen parser
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:42 -04:00
Arnaud Lacombe
880f4499bb genksyms: migrate parser to implicit rules
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:41 -04:00
Arnaud Lacombe
6b19e7e49e genksyms: drop -Wno-uninitialized from HOSTCFLAGS_parse.tab.o
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:40 -04:00
Arnaud Lacombe
45c47d9668 genksyms: pass hash and lookup functions name and target language though the input file
Renaming hash and lookup functions on the command line would reduces its
genericity. Use the .gperf file to pass this information. Do the same for the
target language.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:40 -04:00
Arnaud Lacombe
991d76c950 kbuild: simplify the %_shipped rule
This is needed to have make(1) correctly link the implicit rules which
generate the _shipped file from the lexer/parser to the final file.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:39 -04:00
Arnaud Lacombe
7373f4f83c kbuild: add implicit rules for parser generation
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:38 -04:00
Arnaud Lacombe
e0318d85be kbuild: add `baseprereq'
On the same model as `basetarget', it represents the filename of first
prerequisite with directory and extension stripped.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-09 14:04:38 -04:00
Roland Stigge
8aa460e9e9 staging: iio: max517: Fix iio_info changes
struct iio_info introduced a bug where the second channel of a MAX518 can't be
used. This commit fixes the typo (using max518 instead of the max517 struct).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-09 10:07:47 -07:00
Dan Carpenter
8eb73c6c26 Staging: mei: fix debug code
! has higher precedence than !=.  H_RDY is 8 and since neither 0 nor
1 are equal to 8 the original condition was always true.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-09 10:07:47 -07:00
Vinod Koul
4b28d81a7e Merge remote branch 'gpio/ep93xx-dma' into next 2011-06-09 22:07:05 +05:30
Josef Bacik
3473f3c06a Btrfs: unlock the trans lock properly
In btrfs_wait_for_commit if we came upon a transaction that had committed we
just exited, but that's bad since we are holding the trans_lock.  So break
instead so that the lock is dropped.  Thanks,

Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
2011-06-09 10:15:17 -04:00
Josef Bacik
25b8b936ed Btrfs: don't map extent buffer if path->skip_locking is set
Arne's scrub stuff exposed a problem with mapping the extent buffer in
reada_for_search.  He searches the commit root with multiple threads and with
skip_locking set, so we can race and overwrite node->map_token since node isn't
locked.  So fix this so that we only map the extent buffer if we don't already
have a map_token and skip_locking isn't set.  Without this patch scrub would
panic almost immediately, with the patch it doesn't panic anymore.  Thanks,

Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Josef Bacik <josef@redhat.com>
2011-06-09 10:12:07 -04:00
Mark Brown
2c36c2ce00 Merge branch 'for-3.0' into for-3.1 2011-06-09 15:07:42 +01:00
Liam Girdwood
ddee627cf6 ASoC: core - Separate out PCM operations into new file.
In preparation for Dynamic PCM support (AKA DSP support).

There will be future patches that add support to allow PCMs to be dynamically
routed to multiple DAIs at startup and also during stream runtime. This patch
moves the ASoC core PCM operaitions into a new file called soc-pcm.c.  This will
in simplify the ASoC core features into distinct files.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 15:07:27 +01:00
Lars-Peter Clausen
4b80b8c2ee ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context
Currently it is possible that snd_soc_new_{mixer,mux,pga} is called with a
DAPM context not matching the widgets context. This can lead to a wrong
prefix_len calculation, which will result in undefined behaviour. To avoid
this always use the DAPM context from the widget itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2011-06-09 15:06:54 +01:00
Florian Fainelli
977cb76d52 x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub
This patch fixes the following build failure:

drivers/built-in.o: In function `early_init_dt_check_for_initrd':
/home/florian/dev/kernel/x86/linux-2.6-x86/drivers/of/fdt.c:571:
undefined reference to `early_init_dt_setup_initrd_arch'
make: *** [.tmp_vmlinux1] Error 1

which happens as soon as we enable initrd support on a x86 devicetree
platform such as Intel CE4100.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: stable@kernel.org # 2.6.39
Link: http://lkml.kernel.org/r/201106061015.50039.ffainelli@freebox.fr
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09 15:39:43 +02:00
Stefano Stabellini
a91d92875e xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"
We only need to set max_pfn_mapped to the last pfn mapped on x86_64 to
make sure that cleanup_highmap doesn't remove important mappings at
_end.

We don't need to do this on x86_32 because cleanup_highmap is not called
on x86_32. Besides lowering max_pfn_mapped on x86_32 has the unwanted
side effect of limiting the amount of memory available for the 1:1
kernel pagetable allocation.

This patch reverts the x86_32 part of the original patch.

CC: stable@kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-09 09:08:53 -04:00