Commit graph

277,199 commits

Author SHA1 Message Date
Thomas Gleixner
b77cf6a860 x86: ioapic: Remove useless inlines
There is no point to have irq_trigger() and irq_polarity() as wrappers
around the MPBIOS_* camel case functions. Get rid of both the inlines
and the ugly camel case.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:38:23 +01:00
Tracey Dent
cddb5de053 Readme: Add architecture
Add Tilera Tile architecture to the list of the architectures
that Linux at least runs on.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-02-23 11:31:22 -05:00
Thomas Gleixner
41098ffe05 x86: ioapic: Make a few functions static
No users outside of io_apic.c. Mark bad_ioapic() __init while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:51 +01:00
Thomas Gleixner
da1ad9d7b2 x86: ioapic: Use setup function in setup_IO_APIC_irq_extra()
Another version of the same thing. Only set the pin programmed, when
the setup function succeeds.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:50 +01:00
Thomas Gleixner
2d57e37dbf x86: ioapic: Use setup function in __io_apic_setup_irqs()
Replace the duplicated code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:50 +01:00
Thomas Gleixner
e0799c04b2 x86: ioapic: Use setup function in __io_apic_set_pci_routing()
The only difference here is that we did not call
__add_pin_to_irq_node() for the legacy irqs, but that's not worth 30
lines of extra code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:49 +01:00
Thomas Gleixner
f880ec78fa x86: ioapic: Use new setup function in pre_init_apic_IRQ0()
Remove the duplicated code and call the function. It does not matter
whether we allocated the cfg before calling setup_local_APIC() and we
can set the irq chip and handler after that as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:49 +01:00
Thomas Gleixner
ff973d041e x86: ioapic: Add io_apic_setup_irq_pin()
There are about four places in the ioapic code which do exactly the
same setup sequence. Also the OF based ioapic setup needs that
function to avoid putting the OF specific code into ioapic.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:49 +01:00
Thomas Gleixner
ed972ccf43 x86: ioapic: Split out the nested loop in setup_IO_APIC_irqs()
Two consecutive

    for(...)
    for(...)

lines to avoid an extra indentation are just horrible to read. I had
to look more than once to figure out what the code is doing.

Split out the inner loop into a separate function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:49 +01:00
Thomas Gleixner
c8d6b8fe72 x86: ioapic: Remove silly debug bloat in setup_IOAPIC_irqs()
This is debug code and it does not matter at all whether we print each
not connected pin in an extra line or try to be extra clever.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 17:26:48 +01:00
Rabin Vincent
ba74ec7f6b ARM: 6758/1: amba: support pm ops
Support pm_ops in the AMBA bus, required to allow drivers to use runtime pm.
The implementation of AMBA bus pm ops is based on the platform bus
implementation.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:26:46 +00:00
Russell King
2d00880fa8 ARM: amba: make amba_driver id_table const
Now that the bus level code deals with a const id table, we can also
make the ID table in the amba_driver structure also const.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:22 +00:00
Russell King
c862aab0bc ARM: amba: make internal ID table handling const
As all probe() functions now take a const pointer, we can make the bus
level code deal with const pointers too.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:19 +00:00
Russell King
aa25afad2c ARM: amba: make probe() functions take const id tables
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:14 +00:00
Rob Herring
394d5aefcd ARM: 6662/1: amba: make amba_bustype non-static
Export amba_bustype struct so it can be used for things like registering
bus notifiers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:08 +00:00
Uwe Kleine-König
bf0c11183f ARM: 6744/1: mxs: irq_data conversion
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:22:18 +00:00
Uwe Kleine-König
97594b0f35 ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
Commit

	06824ba (ARM: tlb: delay page freeing for SMP and ARMv7 CPUs)

introduced a build failure for builds with CONFIG_SWAP=n:

	In file included from arch/arm/mm/init.c:27:
	arch/arm/include/asm/tlb.h: In function 'tlb_flush_mmu':
	arch/arm/include/asm/tlb.h:101: error: implicit declaration of function 'release_pages'
	arch/arm/include/asm/tlb.h: In function 'tlb_remove_page':
	arch/arm/include/asm/tlb.h:165: error: implicit declaration of function 'page_cache_release'

as linux/swap.h doesn't include linux/pagemap.h but actually needs it
(see comments in linux/swap.h as to why this is.)

Fix that by #including <linux/pagemap.h> in <asm/pgalloc.h> as it's done
by x86.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:19:21 +00:00
Nicolas Pitre
3572bea8cb ARM: 6748/1: ignore mdesc->boot_params if out of range
The initial MMU table created in head.S contains a 1 MB mapping at the
start of memory to let the early kernel boot code access the boot params
specified by mdesc->boot_params.

When using CONFIG_ARM_PATCH_PHYS_VIRT it is possible for the kernel to
have a different idea of where the start of memory is at run time, making
the compile-time determined mdesc->boot_params pointing to a memory area
which is not mapped.  Any access to the boot params in that case will
fault and silently hang the kernel at that point.  It is therefore a
better idea to simply ignore mdesc->boot_params in that case and give
the kernel a chance to print some diagnostic on the console later.

If the bootloader provides a valid pointer in r2 to the kernel then this
is used instead of mdesc->boot_params, and an explicit mapping is already
created in the initial MMU table for it.  It is therefore a good idea to
use that facility when using a relocated kernel.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:14:25 +00:00
Nicolas Pitre
dce72dd08c ARM: 6749/1: fold lookup_machine_type() into setup_machine()
Since commit 6fc31d54 there is no callers for lookup_machine_type()
other than setup_machine(). And if the former fails it won't return,
therefore the error path in the later is dead code.  Let's clean
things up by merging them together.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:13:17 +00:00
Jesper Nilsson
f19e0eec8b Drop redundant __param section for CRISv32.
The __param section is already brought in by RODATA above.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-23 08:00:47 -08:00
Arnaldo Carvalho de Melo
170ae6bc24 perf annotate: Show better message when no vmlinux is found
In both --tui and --stdio, in 'annotate', 'top', 'report' when trying to
annotate a kernel symbol having just access to a kallsyms file, that
doesn't have the DWARF info needed for annotation.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 12:13:39 -03:00
Daniel De Graaf
f4ee4af447 xen-gntdev: Add cast to pointer
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-23 10:10:34 -05:00
Daniel De Graaf
77c35acb7c xen-gntdev: Fix incorrect use of zero handle
The handle with numeric value 0 is a valid map handle, so it cannot
be used to indicate that a page has not been mapped. Use -1 instead.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-23 10:10:34 -05:00
David Henningsson
ebbd224c22 ALSA: HDA: Add ideapad quirk for two Dell machines
These two Dell machines have been reported working well with
the ideapad model.

BugLink: http://bugs.launchpad.net/bugs/723676
Cc: stable@kernel.org
Tested-by: David Chen <david.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 16:00:28 +01:00
David Henningsson
6da8b51657 ALSA: HDA: Add a new Conexant codec 506e (20590)
Conexant 506e/20590 has the same graph as the rest of the 5066 family.

BugLink: http://bugs.launchpad.net/bugs/723672

Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 16:00:27 +01:00
Ingo Molnar
9848caf26d Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core 2011-02-23 15:50:13 +01:00
Adrian Knoth
a7edbd5bf9 ALSA: hdspm - Fix lock/sync reporting on MADI and AES32
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:46:44 +01:00
Adrian Knoth
4ab69a2b3b ALSA: hdspm - prevent reading unitialized stack memory
Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit
e68d3b316a. I'm copying his text here:

The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged
users to read uninitialized kernel stack memory, because several fields
of the hdspm_config struct declared on the stack are not altered
or zeroed before being copied back to the user.  This patch takes care
of it.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:46:29 +01:00
Adrian Knoth
7c4a95b5ec ALSA: hdspm - fix sync check on AES32
Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong
frequency and sync detection on AES32. According to him, the provided
patch fixes these issues.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:44:42 +01:00
Adrian Knoth
f6ea805f52 ALSA: hdspm - Remove input selector on MADIface
In contrast to the RME MADI card, coax/optical selection on the MADIface
is done via a physical switch located at the breakout box. Obviously,
the driver cannot switch ports in software.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:44:06 +01:00
Adrian Knoth
01e9607815 ALSA: hdspm - Fix DS/QS output channel mappings on RME MADI/MADIface
Caused by two typos, no output channel mappings were assigned for
MADI/MADIface at double/quad speed.

The channel mapping is indeed identical to the single speed mapping, the
cards will simply use the first N channels.

Signed-off-by: Florian Faber <faber@faberman.de>
Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:43:30 +01:00
Adrian Knoth
88fabbfcc6 ALSA: hdspm - Restrict channel count on RME AES/AES32
Without calling an appropriate rule, AES/AES32 cards would announce a
theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the
already known bug:

[37422.640481] ------------[ cut here ]------------
[37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449
snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]()
[37422.640489] Hardware name: PRIMERGY RX100 S6
[37422.640490] BUG? (info->channel >= hdspm->max_channels_in)
[37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog
ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e
snd_rawmidi power_meter [last unloaded: snd_hdspm]
[37422.640501] Pid: 22231, comm: jackd Tainted: G      D W
2.6.36-gentoo-r5 #5
[37422.640502] Call Trace:
[37422.640508]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[37422.640511]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[37422.640514]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640518]  [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202
[snd_hdspm]
[37422.640522]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[37422.640525]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[37422.640527]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640531]  [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59
[37422.640533]  [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227
[37422.640537]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[37422.640540]  [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e
[37422.640543]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[37422.640546]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[37422.640549]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[37422.640552] ---[ end trace 0cd919cd68118082 ]---

We already have all the right values in place, we simply have to inform
the upper layers about this restriction.

Note that snd_hdspm_hw_rule_rate_out_channels and
snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because
the channel count is always 16, no matter of the samplerate in use.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:43:05 +01:00
Adrian Knoth
483cee77d2 ALSA: hdspm - Fix buffer handling on RME MADI/MADIface/AES(32)
Only RayDAT and AIO provide sane buffer pointers that can be used with
HDSPM_BufferPositionMask, on all other cards, this would result in a
wrong HW pointer leading to xruns and these messages:

[260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512
[260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:42:28 +01:00
Adrian Knoth
432d2500ac ALSA: hpdsm - RME AES(32): Fix missing channel mappings
On RME AES and AES(32), none of the required information
(max_channels_in, max_channels_out, channel mappings, port names) was
set, leading to the BUG below.

This patch adds the missing bits, thus fixing the bug.

125.058768] ------------[ cut here ]------------
[  125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389
snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]()
[  125.058775] Hardware name: PRIMERGY RX100 S6
[  125.058777] BUG? (info->channel >= hdspm->max_channels_out)
[  125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si
ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi
i2c_i801
[  125.058787] Pid: 3652, comm: audacity Tainted: G        W
2.6.36-gentoo-r5 #5
[  125.058788] Call Trace:
[  125.058792]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[  125.058796]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[  125.058800]  [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8
[snd_hdspm]
[  125.058803]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[  125.058806]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[  125.058809]  [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6
[  125.058812]  [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227
[  125.058815]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[  125.058818]  [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e
[  125.058821]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[  125.058824]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[  125.058827]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[  125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]---

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Florian Faber <faber@faberman.de>
Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 15:42:15 +01:00
Thomas Gleixner
939d578ecc x86: OLPC: Make OLPC=n build again
Stupid me missed the functions called from setup.c. Add the stubs back
for OLPC=n

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 11:54:02 +01:00
Henrik Kretzschmar
1444e0c9da x86: Fix deps of X86_UP_IOAPIC
Since commit 7cd92366a5
lAPIC enabled accidently the IOAPIC, which now gets fixed.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-5-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:38:46 +01:00
Henrik Kretzschmar
7d0f192613 x86: Add dummy functions for compiling without IOAPIC
This patch adds IOAPIC dummy functions for compilation
with local APIC, but without IOAPIC.

The local variable ioapic_entries in enable_IR_x2apic()
does not need initialization anymore, since the dummy
returns NULL.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-4-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:38:46 +01:00
Henrik Kretzschmar
7167d08e78 x86: Rework arch_disable_smp_support() for x86
Currently arch_disable_smp_support() on x86 disables only the
support for the IOAPIC and is also compiled in if SMP-support is
not.

Therefore this function is renamed to disable_ioapic_support(),
which meets its purpose and is only compiled in the kernel
when IOAPIC support is also.

A new arch_disable_smp_support() is created in smpboot.c,
which calls disable_ioapic_support() and gets only compiled
in the kernel when SMP support is also.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-3-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:38:45 +01:00
Henrik Kretzschmar
b6a1432da8 x86: Add dummy mp_save_irq()
This is a dummy function, used when no IOAPIC is compiled in.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-2-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:38:45 +01:00
Henrik Kretzschmar
4e034b2451 x86: Move ioapic_irq_destination_types to apicdef.h
This enum is used by non IOAPIC code, so apicdef.h is
the best place for it.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-1-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:38:44 +01:00
Peter Zijlstra
768a06e2ca perf: Simplify task_clock_event_read()
There is no point in us having different code paths for nmi and !nmi
here, so remove the !nmi one.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:35:47 +01:00
Stephane Eranian
3f7cce3c18 perf_events: Fix rcu and locking issues with cgroup support
This patches ensures that we do not end up calling
perf_cgroup_from_task() when there is no cgroup event.
This avoids potential RCU and locking issues.

The change in perf_cgroup_set_timestamp() ensures we
check against ctx->nr_cgroups. It also avoids calling
perf_clock() tiwce in a row. It also ensures we do need
to grab ctx->lock before calling the function.

We drop update_cgrp_time() from task_clock_event_read()
because it is not needed. This also avoids having to
deal with perf_cgroup_from_task().

Thanks to Peter Zijlstra for his help on this.

Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d5e76b8.815bdf0a.7ac3.774f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:35:46 +01:00
Mike Galbraith
511f67a599 sched, autogroup: Stop claiming ownership of the root task group
Disown it, and only display autogroup association if one exists.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298383320.8036.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:34:03 +01:00
Yong Zhang
800d4d30c8 sched, autogroup: Stop going ahead if autogroup is disabled
when autogroup is disable from the beginning,
sched_autogroup_create_attach()
  autogroup_move_group()                    <== 1
    sched_move_task()                       <== 2
      task_move_group_fair()
        set_task_rq()
          task_group()
            autogroup_task_group()

We go the whole path without doing anything useful.

Then stop going further if autogroup is disabled.

But there will be a race window between 1 and 2, in which
sysctl_sched_autogroup_enabled is enabled. This issue
will be toke by following patch.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1298185696-4403-4-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:59 +01:00
Yong Zhang
1747b21fec sched, autogroup, sysctl: Use proc_dointvec_minmax() instead
sched_autogroup_enabled has min/max value, proc_dointvec_minmax() is
be used for this case.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298185696-4403-2-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:58 +01:00
Peter Zijlstra
866ab43efd sched: Fix the group_imb logic
On a 2*6*2 machine something like:

 taskset -c 3-11 bash -c 'for ((i=0;i<9;i++)) do while :; do :; done & done'

_should_ result in 9 busy CPUs, each running 1 task.

However it didn't quite work reliably, most of the time one cpu of the
second socket (6-11) would be idle and one cpu of the first socket
(0-5) would have two tasks on it.

The group_imb logic is supposed to deal with this and detect when a
particular group is imbalanced (like in our case, 0-2 are idle but 3-5
will have 4 tasks on it).

The detection phase needed a bit of a tweak as it was too weak and
required more than 2 avg weight tasks difference between idle and busy
cpus in the group which won't trigger for our test-case. So cure that
to be one or more avg task weight difference between cpus.

Once the detection phase worked, it was then defeated by the f_b_g()
tests trying to avoid ping-pongs. In particular, this_load >= max_load
triggered because the pulling cpu (the (first) idle cpu in on the
second socket, say 6) would find this_load to be 5 and max_load to be
4 (there'd be 5 tasks running on our socket and only 4 on the other
socket).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:57 +01:00
Peter Zijlstra
cc57aa8f4b sched: Clean up some f_b_g() comments
The existing comment tends to grow state (as it already has), split it
up and place it near the actual tests.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:56 +01:00
Peter Zijlstra
c186fafe9a sched: Clean up remnants of sd_idle
With the wholesale removal of the sd_idle SMT logic we can clean up
some more.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:55 +01:00
Ingo Molnar
d927dc9379 Merge commit 'v2.6.38-rc6' into sched/core
Merge reason: Pick up the latest fixes before queueing up new changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:31:38 +01:00
Marcin Slusarz
9826e8329b perf lock: Document valid sort keys
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110222205312.GA18474@joi.lan>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 07:29:33 -03:00