Commit graph

277,199 commits

Author SHA1 Message Date
Will Deacon
ed19b739c5 ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR
Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock
is set leads to UNPREDICTABLE behaviour.

This patch ensures that we clear the OS lock before accessing anything
other than the DBGDIDR, thereby avoiding this behaviour.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:54:47 +00:00
Dmitry Eremin-Solenikov
34cd2d38db ARM: 6658/1: collie: do actually pass locomo_info to locomo driver
locomo_info isn't actually used as a platform_data on collie platform:
 arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used

So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the
driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:53:40 +00:00
Dave Martin
9bc433a1db ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL
rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL.
OABI userland is useless without FPA support."

nwfpe doesn't work with Thumb-2 anyway and will probably never get
ported, so I can't argue with that.

This patch implements the dependency change.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:53:05 +00:00
David Teigland
6b155c8fd4 dlm: use single thread workqueues
The recent commit to use cmwq for send and recv threads
dcce240ead introduced problems,
apparently due to multiple workqueue threads.  Single threads
make the problems go away, so return to that until we fully
understand the concurrency issues with multiple threads.

Signed-off-by: David Teigland <teigland@redhat.com>
2011-02-11 16:50:47 -06:00
Linus Lüssing
3878f1f075 batman-adv: Disallow originator addressing within mesh layer
For a host in the mesh network, the batman layer should be transparent.
However, we had one exception, data packets within the mesh network
which have the same destination as a originator are being routed to
that node, although there is no host that node's bat0 interface and
therefore gets dropped anyway. This commit removes this exception.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11 23:30:33 +01:00
Linus Lüssing
ee1e884194 batman-adv: Remove duplicate types.h inclusions
types.h is included by main.h, which is included at the beginning of any
other c-file anyway. Therefore this commit removes those duplicate
inclussions.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11 23:30:29 +01:00
Marek Lindner
1406206416 batman-adv: Split combined variable declarations
Multiple variable declarations in a single statements over multiple lines can
be split into multiple variable declarations without changing the actual
behavior.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11 23:29:00 +01:00
Steven Rostedt
868baf07b1 ftrace: Fix memory leak with function graph and cpu hotplug
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.

On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.

ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.

The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-11 16:23:33 -05:00
Larry Finger
a3dc5e881a rtlwifi: rtl8192ce: Rework rtl8192ce/phy.c
Make the phy.c codes for rtl8192ce and rtl8192cu be as alike as possible.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11 16:16:38 -05:00
Larry Finger
25b2bc3086 rtlwifi: rtl8192ce: Refactor rtl8192ce/fw
Make rtlwifi/rtl8192ce/fw.{h,c} match what will be needed for
rtlwifi/rtl8192cu.{h,c}.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11 16:16:38 -05:00
Larry Finger
8c96fcf721 rtlwifi: rtl8192ce: Refactor rtl8192ce/dm
To reuse as much code as possible when adding additional drivers to the
rtlwifi tree, the common parts of various routines are moved to
drivers/net/wireless/rtlwifi. This patch does that for the version of
dm.{h,c} used by rtl8192ce.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11 16:16:38 -05:00
George
2ca20f79e0 rtlwifi: Add usb driver
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: George <george0505@realtek.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11 16:16:37 -05:00
Larry Finger
62e63975f4 rtlwifi: Modify core routines
The rtlwifi core needs some changes before inclusion of a driver
for the RTL8192CU USB device.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: <chaoming_li@realsil.com.cn>
Signed-off-by: <george0505@realtek.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11 16:16:37 -05:00
Jesse Barnes
47a05eca72 drm/i915: disable PCH ports if needed when disabling a CRTC
Disable any PCH ports associated with a pipe when disabling it.  This
should prevent transcoder disable failures due to ports still being on.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: introduce *_PIPE_ENABLED() macro]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11 20:32:44 +00:00
Chris Wilson
bed636abea drm/i915: i915_mutex_interruptible() returns -EINTR
... so we handle that for i915_gem_fault() in the same manner as
ERESTARTSYS, or we send a SIGBUS to the faulting application.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11 20:32:44 +00:00
Wey-Yi Guy
caebbb7a4a iwlagn: handle bt defer work in 2000 series
For 2000 series, need to handle bt traffic changes when
receive notification from uCode

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-11 11:51:57 -08:00
Wey-Yi Guy
c4197c6298 iwlagn: donot process bt update when bt coex disable
If bt coex is disabled, do not process any bt related information
from uCode even received.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-11 11:51:49 -08:00
Ian Campbell
44b46c3ef8 xen: annotate functions which only call into __init at start of day
Both xen_hvm_init_shared_info and xen_build_mfn_list_list can be
called at resume time as well as at start of day but only reference
__init functions (extend_brk) at start of day. Hence annotate with
__ref.

    WARNING: arch/x86/built-in.o(.text+0x4f1): Section mismatch in reference
        from the function xen_hvm_init_shared_info() to the function
        .init.text:extend_brk()
    The function xen_hvm_init_shared_info() references
    the function __init extend_brk().
    This is often because xen_hvm_init_shared_info lacks a __init
    annotation or the annotation of extend_brk is wrong.

xen_hvm_init_shared_info calls extend_brk() iff !shared_info_page and
initialises shared_info_page with the result. This happens at start of
day only.

    WARNING: arch/x86/built-in.o(.text+0x599b): Section mismatch in reference
        from the function xen_build_mfn_list_list() to the function
        .init.text:extend_brk()
    The function xen_build_mfn_list_list() references
    the function __init extend_brk().
    This is often because xen_build_mfn_list_list lacks a __init
    annotation or the annotation of extend_brk is wrong.

(this warning occurs multiple times)

xen_build_mfn_list_list only calls extend_brk() at boot time, while
building the initial mfn list list

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:34 -05:00
Ian Campbell
6b08cfebd3 xen p2m: annotate variable which appears unused
CC      arch/x86/xen/p2m.o
arch/x86/xen/p2m.c: In function 'm2p_remove_override':
arch/x86/xen/p2m.c:460: warning: 'address' may be used uninitialized in this function
arch/x86/xen/p2m.c: In function 'm2p_add_override':
arch/x86/xen/p2m.c:426: warning: 'address' may be used uninitialized in this function

In actual fact address is inialised in one "if (!PageHighMem(page))"
statement and used in a second and so is always initialised before
use.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:25 -05:00
Ian Campbell
b052181a98 xen: events: mark cpu_evtchn_mask_p as __refdata
This variable starts out pointing at init_evtchn_mask which is marked
__initdata but is set to point to a non-init data region in xen_init_IRQ
which is itself an __init function so this is safe.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-and-acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:25 -05:00
Rafael J. Wysocki
dd68153def atl1: Do not use legacy PCI power management
The atl1 driver uses the legacy PCI power management, so it has to
do some PCI-specific things in its ->suspend() and ->resume()
callbacks, which isn't necessary and should better be done by the PCI
subsystem-level power management code.

Convert atl1 to the new PCI power management framework and make it
let the PCI subsystem take care of all the PCI-specific aspects of
device handling during system power transitions.

Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11 11:38:44 -08:00
Rafael J. Wysocki
0303adeee3 atl1c: Do not call device_init_wakeup() in atl1c_probe()
The atl1c driver shouldn't call device_init_wakeup() in its probe
routine with the second argument equal to 1, because for PCI devices
the wakeup capability setting is initialized as appropriate by the
PCI subsystem.  Remove the potentially harmful call.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11 11:38:43 -08:00
Rafael J. Wysocki
43067ed8ae tg3: Avoid setting power.can_wakeup for devices that cannot wake up
The tg3 driver uses device_init_wakeup() in such a way that the
device's power.can_wakeup flag may be set even though the PCI
subsystem cleared it before, in which case the device cannot wake
up the system from sleep states.  Modify the driver to only change
the power.can_wakeup flag if the device is not capable of generating
wakeup signals.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11 11:38:43 -08:00
Steffen Klassert
946bf5ee3c ip_gre: Add IPPROTO_GRE to flowi in ipgre_tunnel_xmit
Commit 5811662b15 ("net: use the macros
defined for the members of flowi") accidentally removed the setting of
IPPROTO_GRE from the struct flowi in ipgre_tunnel_xmit. This patch
restores it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11 11:23:12 -08:00
Julien Boibessot
124c13b9a3 i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & MX51_PAD_USBH1_DATA2__UART2_TXD declarations
Fixes 2 small regressions of recent iomux changes:
 - current MX51_PAD_UART2_TXD__UART2_TXD declaration overwrites
   IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT register (0x09ec) and prevent
   UART2 Rx from working properly.
   (Tested on my custom i.MX51 board where UART2 is used as console)
 - current MX51_PAD_USBH1_DATA2__UART2_TXD declaration also has the same problem.
   (Not tested)

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11 18:39:19 +01:00
Uwe Kleine-König
4e43d9fad1 ARM: mx3/mx31ads: fix comments of irq callbacks
The arguments to these callbacks were changed in

	e981a30 (ARM: mx3: irq_data conversion.)

but the comments were not adapted.

Cc: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11 18:37:34 +01:00
Uwe Kleine-König
a0c859c593 ARM: mx3: remove some useless comments
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11 18:37:33 +01:00
Uwe Kleine-König
e134fb2b40 ARM: mx3+mx5: rename mxc_board_init to ${machine}_init
mxc_board_init is too generic to be useful.  Additionally change some
mxc_timer to ${machine}_timer, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11 18:37:33 +01:00
Bala Shanmugam
d9f51b51db Bluetooth: Add firmware support for Atheros 3012
Blacklisted AR3012 PID in btusb and added the same
in ath3k to load patch and sysconfig files.

Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-11 15:21:46 -02:00
Vasiliy Kulikov
e3fb592b15 Bluetooth: l2cap: fix 1 byte infoleak to userspace
Structure l2cap_options has one padding byte between max_tx and
txwin_size fields.  This byte in "opts" is copied to userspace
uninitialized.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-11 15:21:29 -02:00
Stefan Berger
44bd4de9c2 netfilter: xt_connlimit: connlimit-above early loop termination
The patch below introduces an early termination of the loop that is
counting matches. It terminates once the counter has exceeded the
threshold provided by the user. There's no point in continuing the loop
afterwards and looking at other entries.

It plays together with the following code further below:

return (connections > info->limit) ^ info->inverse;

where connections is the result of the counted connection, which in turn
is the matches variable in the loop. So once

        -> matches = info->limit + 1
alias   -> matches > info->limit
alias   -> matches > threshold

we can terminate the loop.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-11 18:00:07 +01:00
Atita Shirwaikar
1b1c0a489c ixgbe: Adding 100MB FULL support in ethtool
Current driver does not show 100MB support in ethtool.
Adding support for the same.

Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:57:39 -08:00
Don Skidmore
8fecce62b5 ixgbe: cleanup ixgbe_init_mbx_params_pf namespace issue
The function ixgbe_init_mbx_params_pf isn't used unless CONFIG_PCI_IOV
is defined.  This is causing namespace warnings.  So I wrapped its
definition in CONFIG_PCI_IOV too.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:57:13 -08:00
Don Skidmore
32f754667e ixgbe: cleanup namespace complaint by removing little used function
We had a support function that just walked a few pointers to get
from the ixgbe_hw struct to the netdev pointer.  This was causing
a namespace warning so I removed it and just reference the pointers
directly.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:56:39 -08:00
Don Skidmore
3b2ee94300 ixgbe: fix namespace issue with ixgbe_dcb_txq_to_tc
We didn't need the prototype and it was causing namespace complaints so
I made it static.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:56:03 -08:00
John Fastabend
5977deaa6d ixgbe: DCB, use hardware independent routines
This consolidates hardware specifics to ixgbe_dcb.c this simplifies
code that was previously branching based on hardware type.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:55:36 -08:00
John Fastabend
d37e1d0eba ixgbe: DCB, remove RESET bit it is no longer needed
This removes the RESET bit previously used to force a device
reset when DCB bandwidth configurations were changed. This can
now be done dynamically without a reset so the bit is no longer
needed. The only remaining operations that force a device reset
are DCB enable/disable and FCoE application priority changes.
DCB enable/disable is a hardware requirement.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:55:06 -08:00
John Fastabend
d43f5c21d6 ixgbe: DCB, do not reset on CEE pg changes
The 82599 and 82598 devices do not require hardware resets to
configure CEE pg settings. This patch changes DCB configuration
to set the CEE pg values directly from the dcbnl ops routine.

This reduces the number of resets seen on the wire and allows
LLDP to reach a steady state faster.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:54:35 -08:00
John Fastabend
d033d526a4 ixgbe: DCB, implement 802.1Qaz routines
Implements 802.1Qaz support for ixgbe driver. Additionally,
this adds IEEE_8021QAZ_TSA_{} defines to dcbnl.h this is to
avoid having to use cryptic numeric codes for the TSA type.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:47:15 -08:00
John Fastabend
55320cb58b ixgbe: DCB, abstract out dcb_config from DCB hardware configuration
Currently the routines that configure the HW for DCB require a
ixgbe_dcb_config structure. This structure was designed to support
the CEE standard and does not match the IEEE standard well.

This patch changes the HW routines in ixgbe_dcb_8259x.{ch} to use
raw pfc and bandwidth values. This requires some parsing of the DCB
configuration but makes the HW routines independent of the data
structure that contains the DCB configuration.

The primary advantage to doing this is we can do HW setup directly
from the 802.1Qaz ops without having to arbitrarily encapsulate this
data into the CEE structure.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:44:04 -08:00
John Fastabend
39a7e587ec ixgbe: DCB, remove round robin mode on 82598 devices
Remove round robin configuration code for 82598 parts it
is not settable and is always false.

If we need/want this in the future we can add it back properly.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:43:37 -08:00
John Fastabend
53bb9f80b3 ixgbe: DCB, only reprogram HW if the FCoE priority is changed
If the FCoE priority is not changing do not set the RESET and
APP_UPCHG bits. This causes unneeded HW resets and which can
cause unneeded LLDP frames and negotiations.

The current check is not sufficient because the FCoE priority
can change twice during a negotiation which results in the
bits being set. This occurs when the switch changes the
priority or when the link is reset with switches that do not
include the APP priority until after PFC has been negotiated.

This results in set_app being called with the local APP
priority. Then the negotiation completes and set_app
is called again with the peer APP priority. The check
fails so the device is reset and the above occurs again
resulting in an endless loop of resets.

By only resetting the device if the APP priority has really
changed we short circuit the loop.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:43:14 -08:00
Carolyn Wyborny
6b78bb1d46 igb: Enable PF side of SR-IOV support for i350 devices
This patch adds full support for SR-IOV by enabling the PF side.
VF side has already been committed.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:42:47 -08:00
Bruce Allan
5962bc21ce e1000e: return appropriate errors for 'ethtool -r'
...when invoked while interface is not up or when auto-negotiation is
disabled as done by other drivers.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:42:15 -08:00
Bruce Allan
5c1bda0aa3 e1000e: use correct pointer when memcpy'ing a 2-dimensional array
*e1000_gstrings_test is not the same size as e1000_gstrings_test.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:34:45 -08:00
Bruce Allan
79f5e84014 e1000e: replace unbounded sprintf with snprintf
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11 08:34:28 -08:00
Jamie Iles
21bd6d37cf ARM: 6629/2: aaec2000: remove support for mach-aaec2000
mach-aaec2000 is no longer actively maintained and is only receiving
fixups to remain building with other kernel updates.

Cc: Bellido Nicolas <ml@acolin.be>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 16:11:01 +00:00
Harry Wei
a23ce6da96 MAINTAINERS: fix sorting
Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 16:52:20 +01:00
Wolfram Sang
ced649ea39 MAINTAINERS: add second list for IRDA
The irda-users-list is currently almost dead and subscribers-only. Adding
netdev increases the audience which might help to not overlook a bugreport
again.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:31:47 +01:00
Paul Bolle
45e8234cad x86: Fix printk typo WARING
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:17:24 +01:00