Commit graph

4,009 commits

Author SHA1 Message Date
Ard Biesheuvel
7b9896c352 ARM: percpu: add SMP_ON_UP support
Permit the use of the TPIDRPRW system register for carrying the per-CPU
offset in generic SMP configurations that also target non-SMP capable
ARMv6 cores. This uses the SMP_ON_UP code patching framework to turn all
TPIDRPRW accesses into reads/writes of entry #0 in the __per_cpu_offset
array.

While at it, switch over some existing direct TPIDRPRW accesses in asm
code to invocations of a new helper that is patched in the same way when
necessary.

Note that CPU_V6+SMP without SMP_ON_UP results in a kernel that does not
boot on v6 CPUs without SMP extensions, so add this dependency to
Kconfig as well.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-06 12:49:17 +01:00
Ard Biesheuvel
4e918ab13e ARM: assembler: add optimized ldr/str macros to load variables from memory
We will be adding variable loads to various hot paths, so it makes sense
to add a helper macro that can load variables from asm code without the
use of literal pool entries. On v7 or later, we can simply use MOVW/MOVT
pairs, but on earlier cores, this requires a bit of hackery to emit a
instruction sequence that implements this using a sequence of ADD/LDR
instructions.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-06 12:49:16 +01:00
Ard Biesheuvel
1fa8c4b195 ARM: module: implement support for PC-relative group relocations
Add support for the R_ARM_ALU_PC_Gn_NC and R_ARM_LDR_PC_G2 group
relocations [0] so we can use them in modules. These will be used to
load the current task pointer from a global variable without having to
rely on a literal pool entry to carry the address of this variable,
which may have a significant negative impact on cache utilization for
variables that are used often and in many different places, as each
occurrence will result in a literal pool entry and therefore a line in
the D-cache.

[0] 'ELF for the ARM architecture'
    https://github.com/ARM-software/abi-aa/releases

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-06 12:49:16 +01:00
Vladimir Murzin
52d2408717 irqchip: nvic: Use GENERIC_IRQ_MULTI_HANDLER
Rather then restructuring the ARMv7M entrly logic per TODO, just move
NVIC to GENERIC_IRQ_MULTI_HANDLER.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-06 12:49:16 +01:00
Arnd Bergmann
54f481a230 ARM: remove old-style irq entry
The last user of arch_irq_handler_default is gone now, so the
entry-macro-multi.S file and all references to mach/entry-macro.S can
be removed, as well as the asm_do_IRQ() entrypoint into the interrupt
handling routines implemented in C.

Note: The ARMv7-M entry still uses its own top-level IRQ entry, calling
nvic_handle_irq() from assembly. This could be changed to go through
generic_handle_arch_irq() as well, but it's unclear to me if there are
any benefits.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: keep irq_handler macro as it carries all the IRQ stack handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-06 12:49:11 +01:00
Greg Kroah-Hartman
f5bced9f34 Merge 5.16-rc4 into tty-next
We need the tty/serial driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-06 09:32:47 +01:00
Arnd Bergmann
c1fe8d054c ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER
This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.

Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.

The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 18:43:38 +01:00
Ard Biesheuvel
d60ff2e766 ARM: riscpc: drop support for IOMD_IRQREQC/IOMD_IRQREQD IRQ groups
IOMD_IRQREQC nor IOMD_IRQREQD are ever defined, so any conditionally
compiled code that depends on them is dead code, and can be removed.

Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-12-03 18:42:22 +01:00
Ard Biesheuvel
a1c510d0ad ARM: implement support for vmap'ed stacks
Wire up the generic support for managing task stack allocations via vmalloc,
and implement the entry code that detects whether we faulted because of a
stack overrun (or future stack overrun caused by pushing the pt_regs array)

While this adds a fair amount of tricky entry asm code, it should be
noted that it only adds a TST + branch to the svc_entry path. The code
implementing the non-trivial handling of the overflow stack is emitted
out-of-line into the .text section.

Since on ARM, we rely on do_translation_fault() to keep PMD level page
table entries that cover the vmalloc region up to date, we need to
ensure that we don't hit such a stale PMD entry when accessing the
stack. So we do a dummy read from the new stack while still running from
the old one on the context switch path, and bump the vmalloc_seq counter
when PMD level entries in the vmalloc range are modified, so that the MM
switch fetches the latest version of the entries.

Note that we need to increase the per-mode stack by 1 word, to gain some
space to stash a GPR until we know it is safe to touch the stack.
However, due to the cacheline alignment of the struct, this does not
actually increase the memory footprint of the struct stack array at all.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:33 +01:00
Ard Biesheuvel
d4664b6c98 ARM: implement IRQ stacks
Now that we no longer rely on the stack pointer to access the current
task struct or thread info, we can implement support for IRQ stacks
cleanly as well.

Define a per-CPU IRQ stack and switch to this stack when taking an IRQ,
provided that we were not already using that stack in the interrupted
context. This is never the case for IRQs taken from user space, but ones
taken while running in the kernel could fire while one taken from user
space has not completed yet.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:31 +01:00
Ard Biesheuvel
4ab6827081 ARM: unwind: dump exception stack from calling frame
The existing code that dumps the contents of the pt_regs structure
passed to __entry routines does so while unwinding the callee frame, and
dereferences the stack pointer as a struct pt_regs*. This will no longer
work when we enable support for IRQ or overflow stacks, because the
struct pt_regs may live on the task stack, while we are executing from
another stack.

The unwinder has access to this information, but only while unwinding
the calling frame. So let's combine the exception stack dumping code
with the handling of the calling frame as well. By printing it before
dumping the caller/callee addresses, the output order is preserved.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:31 +01:00
Ard Biesheuvel
8cdfdf7fe4 ARM: export dump_mem() to other objects
The unwind info based stack unwinder will make its own call to
dump_mem() to dump the exception stack, so give it external linkage.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:31 +01:00
Ard Biesheuvel
b3ab60b179 ARM: assembler: introduce bl_r macro
Add a bl_r macro that abstract the difference between the ways indirect
calls are performed on older and newer ARM architecture revisions.

The main difference is to prefer blx instructions over explicit LR
assignments when possible, as these tend to confuse the prediction logic
in out-of-order cores when speculating across a function return.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:31 +01:00
Ard Biesheuvel
08572cd419 ARM: remove some dead code
This code appears to be no longer used so let's get rid of it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:31 +01:00
Pali Rohár
bc02973a06 arm: ioremap: Implement standard PCI function pci_remap_iospace()
pci_remap_iospace() is standard PCI core function. Architecture code can
reimplement default core implementation if needs custom arch specific
functionality.

ARM needs custom implementation due to pci_ioremap_set_mem_type() hook
which allows ARM platforms to change mem type for iospace.

Implement this pci_remap_iospace() function for ARM architecture to
correctly handle pci_ioremap_set_mem_type() hook, which allows usage of
this standard PCI core function also for platforms which needs different
mem type (e.g. Marvell Armada 375, 38x and 39x).

Link: https://lore.kernel.org/r/20211124154116.916-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-11-30 11:10:11 +00:00
Lukas Bulwahn
635e4172bd arm: remove zte zx platform left-over
Commit 89d4f98ae9 ("ARM: remove zte zx platform") missed to remove some
definitions for this platform's debug and serial, e.g., code dependent on
the config DEBUG_ZTE_ZX.

Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns:

DEBUG_ZTE_ZX
Referencing files: arch/arm/include/debug/pl01x.S

Further review by Arnd Bergmann identified even more dead code in the
amba serial driver.

Remove all this left-over from the zte zx platform.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211102063810.932-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25 18:30:52 +01:00
Lukasz Luba
7e97b3dc25 arch_topology: Remove unused topology_set_thermal_pressure() and related
There is no need of this function (and related) since code has been
converted to use the new arch_update_thermal_pressure() API. The old
code can be removed.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-11-23 15:10:26 +05:30
Lukasz Luba
c214f12416 arch_topology: Introduce thermal pressure update function
The thermal pressure is a mechanism which is used for providing
information about reduced CPU performance to the scheduler. Usually code
has to convert the value from frequency units into capacity units,
which are understandable by the scheduler. Create a common conversion code
which can be just used via a handy API.

Internally, the topology_update_thermal_pressure() operates on frequency
in MHz and max CPU frequency is taken from 'freq_factor' (per-cpu).

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-11-23 15:10:26 +05:30
Lukas Bulwahn
b0100bce4f ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
Since commit 4b563a0666 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.

So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.

This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-11-21 16:45:16 +08:00
Matthew Wilcox (Oracle)
522a0032af Add linux/cacheflush.h
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.

Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().

More functions should have their default implementations moved in the
future, but those are for follow-on patches.  This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().

Fixes: 08b0b0059b ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-11-17 10:36:15 -05:00
Linus Torvalds
e8f023caee asm-generic: asm/syscall.h cleanup
This is a single cleanup from Peter Collingbourne, removing
 some dead code.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGKm+kACgkQmmx57+YA
 GNkksg/7BUxJrWFrQmLA3fhzh4wG3KswdrKTGQMf0jRVI1n77vmdfig3hEJmMekH
 0SZoIYmPztOSj34+6p4NxuqY/Sk62oYLr8Awo8ZLDhIBWNUJE8UWC07Qb/3DpGbp
 JfD7/8mXu10htgM85aGlhaVLnHvvqUBR8PlkJUGNxuY5Gy2L+eCkpwCAYlZpSOqr
 vs0BJWFY1LzO1POcjIq4/IM0PvcU2ncLB5XoxDjjIIWnWKyHzWY21ZvoeaNumvou
 xqQ/Hj8Sc+ufS0yNlSgIC+bJP0bp1bSw/dALKr8oYxLt7X9LELVY3WXyRH+It4nS
 b6HPYmga26NVq/u7RrylBA+2fRCDB8E6z73gHt4SeHrRDEvFjhNzIyV+aXPae/dY
 XI/pjiwpG6k6FpSnF69YZJ/Y+GmUA90V/Jq8aLFZhGz8SgpjRl+2foEUSDhRVXCA
 jGB1Y388m0e6jPlVJROB7ORzXMd8K5iciyUGqtAI87QCOtPozn10ruh5RdziguKm
 kDW5IKy9E4l1ch8WRprVbgV5Ew+QWKS1JIbyjDaX3jN0lUPCqgwkwvRxxtgdFnVA
 Lq5BiUdraSWFUr84rLU3gCRU0+VoEdyZYI+bQGGNlQ4ovmLYU1nLmCU/azMvSEgz
 ZsoM5YdffShxUtfwMg+W67RpYOjSnV55ZzwN0+d1C2oqz9xECXc=
 =8EFP
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cleanup from Arnd Bergmann:
 "This is a single cleanup from Peter Collingbourne, removing some dead
  code"

* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: remove unused function syscall_set_arguments()
2021-11-10 11:22:03 -08:00
Linus Torvalds
ab2e7f4b46 ARM development for 5.16:
- Rejig task/thread info to place thread info in task struct
 - Amba bus cleanups (removing unused functions)
 - Handle Amba device probe without IRQ domains
 - Parse linux,usable-memory-range in decompressor
 - Mark OCRAM as read-only after initialisation
 - Refactor page fault handling
 - Fix PXN handling with LPAE kernels
 - Warning and build fixes from Arnd
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmGBEFIACgkQ9OeQG+St
 rGRbLw/9EQPEVAnx4obKSfQ7+H6JF8EZnSUvmFe0tK2zyR5T8dCoifh5bmdkdu51
 r2gtxse9gbCKzGyfAlhcR+p47P94ULt3/slRb+thc1E3USAkP9mDLH2gXlWraVOL
 TdBn6WD2zHdGWmLYB3RPjh/FpQy2IEKajQU9pFC+Rp0Hf8OKg7KH1E5Ap8W9kjz6
 o2HieVxsteuWKwCauQq95IDNZ/fpq/FuQi38fn11O52uB8PO4OC3LUR33/4qKBYj
 iykzt6hxHHnDLWKMrR9hbv0J6hSjflVgqTEirTuk1EpkKcIVoc6EOPTGENus7U1r
 GcrVbrnAs/obgYgT1DwTS0mreIAQ2dNpekbbICqD/SFrV4Rt/zOjImFXm17L4mxU
 2D0FG9iyTFgQIYOQBrbaUbeeDpH+Dxn4ldFYWZ0/PLukz901KK40xV6b9gpe52iY
 DJDmO8OVH55ZargQQXB13vcJ79ZYcHusEr+kBkU+kXXP7LzTBTZfj2a/xCR0H2hw
 urS5ocp8WXHQ+jSZGVLR82kIVK0TuqDmkuOSi+VXuCIAMC3ITaSs5X1/foVn7r2b
 SdBSoqa2R28HSWudtkP7Ki1QCqxzrrn4RWjCOyEa+aoHyKT/MXQ7E7qwrg8nWBXV
 Ep83wvL2TmE5ZaljfEcyXnjYnXTcStB+YAD4G/6dZERLXbJ1tms=
 =lDRU
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - Rejig task/thread info to place thread info in task struct

 - Amba bus cleanups (removing unused functions)

 - Handle Amba device probe without IRQ domains

 - Parse linux,usable-memory-range in decompressor

 - Mark OCRAM as read-only after initialisation

 - Refactor page fault handling

 - Fix PXN handling with LPAE kernels

 - Warning and build fixes from Arnd

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on Clang
  ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=y
  ARM: 9147/1: add printf format attribute to early_print()
  ARM: 9146/1: RiscPC needs older gcc version
  ARM: 9145/1: patch: fix BE32 compilation
  ARM: 9144/1: forbid ftrace with clang and thumb2_kernel
  ARM: 9143/1: add CONFIG_PHYS_OFFSET default values
  ARM: 9142/1: kasan: work around LPAE build warning
  ARM: 9140/1: allow compile-testing without machine record
  ARM: 9137/1: disallow CONFIG_THUMB with ARMv4
  ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
  ARM: 9135/1: kprobes: address gcc -Wempty-body warning
  ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIs
  ARM: 9131/1: mm: Fix PXN process with LPAE feature
  ARM: 9130/1: mm: Provide die_kernel_fault() helper
  ARM: 9126/1: mm: Kill page table base print in show_pte()
  ARM: 9127/1: mm: Cleanup access_error()
  ARM: 9129/1: mm: Kill task_struct argument for __do_page_fault()
  ARM: 9128/1: mm: Refactor the __do_page_fault()
  ARM: imx6: mark OCRAM mapping read-only
  ...
2021-11-02 11:33:15 -07:00
Russell King (Oracle)
11779842dd Merge branches 'devel-stable' and 'misc' into for-linus 2021-11-02 09:04:22 +00:00
Linus Torvalds
79ef0c0014 Tracing updates for 5.16:
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
   dump happens from a kretprobe callback.
 
 - Fix to bootconfig parsing
 
 - Have tracefs allow owner and group permissions by default (only denying
   others). There's been pressure to allow non root to tracefs in a
   controlled fashion, and using groups is probably the safest.
 
 - Bootconfig memory managament updates.
 
 - Bootconfig clean up to have the tools directory be less dependent on
   changes in the kernel tree.
 
 - Allow perf to be traced by function tracer.
 
 - Rewrite of function graph tracer to be a callback from the function tracer
   instead of having its own trampoline (this change will happen on an arch
   by arch basis, and currently only x86_64 implements it).
 
 - Allow multiple direct trampolines (bpf hooks to functions) be batched
   together in one synchronization.
 
 - Allow histogram triggers to add variables that can perform calculations
   against the event's fields.
 
 - Use the linker to determine architecture callbacks from the ftrace
   trampoline to allow for proper parameter prototypes and prevent warnings
   from the compiler.
 
 - Extend histogram triggers to key off of variables.
 
 - Have trace recursion use bit magic to determine preempt context over if
   branches.
 
 - Have trace recursion disable preemption as all use cases do anyway.
 
 - Added testing for verification of tracing utilities.
 
 - Various small clean ups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
 Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
 =Loz8
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - kprobes: Restructured stack unwinder to show properly on x86 when a
   stack dump happens from a kretprobe callback.

 - Fix to bootconfig parsing

 - Have tracefs allow owner and group permissions by default (only
   denying others). There's been pressure to allow non root to tracefs
   in a controlled fashion, and using groups is probably the safest.

 - Bootconfig memory managament updates.

 - Bootconfig clean up to have the tools directory be less dependent on
   changes in the kernel tree.

 - Allow perf to be traced by function tracer.

 - Rewrite of function graph tracer to be a callback from the function
   tracer instead of having its own trampoline (this change will happen
   on an arch by arch basis, and currently only x86_64 implements it).

 - Allow multiple direct trampolines (bpf hooks to functions) be batched
   together in one synchronization.

 - Allow histogram triggers to add variables that can perform
   calculations against the event's fields.

 - Use the linker to determine architecture callbacks from the ftrace
   trampoline to allow for proper parameter prototypes and prevent
   warnings from the compiler.

 - Extend histogram triggers to key off of variables.

 - Have trace recursion use bit magic to determine preempt context over
   if branches.

 - Have trace recursion disable preemption as all use cases do anyway.

 - Added testing for verification of tracing utilities.

 - Various small clean ups and fixes.

* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
  tracing/histogram: Fix semicolon.cocci warnings
  tracing/histogram: Fix documentation inline emphasis warning
  tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
  tracing: Show size of requested perf buffer
  bootconfig: Initialize ret in xbc_parse_tree()
  ftrace: do CPU checking after preemption disabled
  ftrace: disable preemption when recursion locked
  tracing/histogram: Document expression arithmetic and constants
  tracing/histogram: Optimize division by a power of 2
  tracing/histogram: Covert expr to const if both operands are constants
  tracing/histogram: Simplify handling of .sym-offset in expressions
  tracing: Fix operator precedence for hist triggers expression
  tracing: Add division and multiplication support for hist triggers
  tracing: Add support for creating hist trigger variables from literal
  selftests/ftrace: Stop tracing while reading the trace file by default
  MAINTAINERS: Update KPROBES and TRACING entries
  test_kprobes: Move it from kernel/ to lib/
  docs, kprobes: Remove invalid URL and add new reference
  samples/kretprobes: Fix return value if register_kretprobe() failed
  lib/bootconfig: Fix the xbc_get_info kerneldoc
  ...
2021-11-01 20:05:19 -07:00
Linus Torvalds
9a7e0a90a4 Scheduler updates:
- Revert the printk format based wchan() symbol resolution as it can leak
    the raw value in case that the symbol is not resolvable.
 
  - Make wchan() more robust and work with all kind of unwinders by
    enforcing that the task stays blocked while unwinding is in progress.
 
  - Prevent sched_fork() from accessing an invalid sched_task_group
 
  - Improve asymmetric packing logic
 
  - Extend scheduler statistics to RT and DL scheduling classes and add
    statistics for bandwith burst to the SCHED_FAIR class.
 
  - Properly account SCHED_IDLE entities
 
  - Prevent a potential deadlock when initial priority is assigned to a
    newly created kthread. A recent change to plug a race between cpuset and
    __sched_setscheduler() introduced a new lock dependency which is now
    triggered. Break the lock dependency chain by moving the priority
    assignment to the thread function.
 
  - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
 
  - Improve idle balancing in general and especially for NOHZ enabled
    systems.
 
  - Provide proper interfaces for live patching so it does not have to
    fiddle with scheduler internals.
 
  - Add cluster aware scheduling support.
 
  - A small set of tweaks for RT (irqwork, wait_task_inactive(), various
    scheduler options and delaying mmdrop)
 
  - The usual small tweaks and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/OUkTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoR/5D/9ikdGNpKg9osNqJ3GjAmxsK6kVkB29
 iFe2k8pIpWDToWQf/wQRGih4Yj3Cl49QSnZcPIibh2/12EB1qrrW6iSPJkInz8Ec
 /1LS5/Vewn2OyoxyXZjdvGC5gTXEodSbIazASvX7nvdMeI4gsAsL5etzrMJirT/t
 aymqvr7zovvywrwMTQJrGjUMo9l4ewE8tafMNNhRu1BHU1U4ojM9yvThyRAAcmp7
 3Xy49A+Yq3IgrvYI4u8FMK5Zh08KaxSFjiLhePGm/bF+wSfYmWop2TP1jY05W2Uo
 ti8hfbJMUoFRYuMxAiEldkItnc0wV4M9PtWZZ/x+B71bs65Y4Zjt9cW+rxJv2+m1
 vzV31EsQwGnOti072dzWN4c/cZqngVXAjaNtErvDwJUr+Tw1ayv9KUvuodMQqZY6
 mu68bFUO2kV9EMe1CBOv51Uy1RGHyLj3rlNqrkw+Xp5ISE9Ad2vhUEiRp5bQx5Ci
 V/XFhGZkGUluh0vccrdFlNYZwhj8cZEzkOPCnPSeZ+bq8SyZE6xuHH/lTP1CJCOy
 s800rW1huM+kgV+zRN8adDkGXibAk9N3RtVGnQXmuEy8gB9LZmQg+JeM2wsc9B+6
 i0gdqZnsjNAfoK+BBAG4holxptSL8/eOJsFH8ZNIoxQ+iqooyPx9tFX7yXnRTBQj
 d2qWG7UvoseT+g==
 =fgtS
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Thomas Gleixner:

 - Revert the printk format based wchan() symbol resolution as it can
   leak the raw value in case that the symbol is not resolvable.

 - Make wchan() more robust and work with all kind of unwinders by
   enforcing that the task stays blocked while unwinding is in progress.

 - Prevent sched_fork() from accessing an invalid sched_task_group

 - Improve asymmetric packing logic

 - Extend scheduler statistics to RT and DL scheduling classes and add
   statistics for bandwith burst to the SCHED_FAIR class.

 - Properly account SCHED_IDLE entities

 - Prevent a potential deadlock when initial priority is assigned to a
   newly created kthread. A recent change to plug a race between cpuset
   and __sched_setscheduler() introduced a new lock dependency which is
   now triggered. Break the lock dependency chain by moving the priority
   assignment to the thread function.

 - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.

 - Improve idle balancing in general and especially for NOHZ enabled
   systems.

 - Provide proper interfaces for live patching so it does not have to
   fiddle with scheduler internals.

 - Add cluster aware scheduling support.

 - A small set of tweaks for RT (irqwork, wait_task_inactive(), various
   scheduler options and delaying mmdrop)

 - The usual small tweaks and improvements all over the place

* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
  sched/fair: Cleanup newidle_balance
  sched/fair: Remove sysctl_sched_migration_cost condition
  sched/fair: Wait before decaying max_newidle_lb_cost
  sched/fair: Skip update_blocked_averages if we are defering load balance
  sched/fair: Account update_blocked_averages in newidle_balance cost
  x86: Fix __get_wchan() for !STACKTRACE
  sched,x86: Fix L2 cache mask
  sched/core: Remove rq_relock()
  sched: Improve wake_up_all_idle_cpus() take #2
  irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
  irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
  irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
  sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
  sched: Add cluster scheduler level for x86
  sched: Add cluster scheduler level in core and related Kconfig for ARM64
  topology: Represent clusters of CPUs within a die
  sched: Disable -Wunused-but-set-variable
  sched: Add wrapper for get_wchan() to keep task blocked
  x86: Fix get_wchan() to support the ORC unwinder
  proc: Use task_is_running() for wchan in /proc/$pid/stat
  ...
2021-11-01 13:48:52 -07:00
Linus Torvalds
57a315cd71 Time, timers and timekeeping updates:
- No core updates
 
   - No new clocksource/event driver
 
   - A large rework of the ARM architected timer driver to prepare for the
     support of the upcoming ARMv8.6 support
 
   - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
 
   - Address a namespace collison in the ARC sp804 timer driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/IPsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXztEACE15PRW/s3dsKjsX4HgZocPS3WSeBx
 Nim90LHLWA8hiN3LdY5PmyB5lWHFPojCNtnnnA3hAAasalxtxu00XUwMx11Ewf7C
 HDpYvW4Pp3QHFH9i45nxVJ/2bhiL7g8cpvYNrXuk2rVkZnBf13LGqD4IUJbts/gY
 X+T0NTDHFNjJjbabuD4LVsfKkerPPJawYtL6EnFn8hkZwMKVY2Mq0xw6fCzA7qGy
 JbBkt0Or5k7imruq3uob9V+IscmkcPRxrP1JOgJLbzCbax+bpz2SL1nZxm5NAeol
 Hdxx+bP2PnpoCsq6GnN3q17nvr8PEOeEQ02AcZ/5IpExIfBnIDahJ61KA8Ao6WGm
 xvVY4fIG6nqul6LMqoAyVc0BeG4Mc7u3D12f+1/UE9pmYbMEM5TcHRbxg0QgTauF
 R78xc5P5v+B2LcUTE9/czJlaCZQuAF+4N60Lnt+aW0Ahsa0h+O2vrX1rBOC3d4US
 12xexkAimMS8VvmuD5wSPE9JrBMDZraJuDM3G+5cwOjXIG8VFXOSloOn/9BhWFEM
 c0scefsGFxENDwkd3d6PmGfrtxSOnqAzhvxgRyJ9zql9wX6LDOa6s2HXKxdSXEL8
 N18WTWsC0Ps60XLlH9CQrBj/T0YnKpOazMx0LIFLPFqEkoSkEjq1j3KgDnSQQ4uE
 J4c2UU4M8FnMlg==
 =SVx3
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timers and timekeeping updates:

   - No core updates

   - No new clocksource/event driver

   - A large rework of the ARM architected timer driver to prepare for
     the support of the upcoming ARMv8.6 support

   - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers

   - Address a namespace collison in the ARC sp804 timer driver"

* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-ti-dm: Select TIMER_OF
  clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
  clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
  clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
  clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
  clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
  clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
  clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
  clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
  clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
  clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
  clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
  clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
  clocksource/drivers/arc_timer: Eliminate redefined macro error
2021-11-01 13:44:55 -07:00
Linus Torvalds
49f8275c7d Memory folios
Add memory folios, a new type to represent either order-0 pages or
 the head page of a compound page.  This should be enough infrastructure
 to support filesystems converting from pages to folios.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmF9uI0ACgkQDpNsjXcp
 gj7MUAf/R7LCZ+xFiIedw7SAgb/DGK0C9uVjuBEIZgAw21ZUw/GuPI6cuKBMFGGf
 rRcdtlvMpwi7yZJcoNXxaqU/xPaaJMjf2XxscIvYJP1mjlZVuwmP9dOx0neNvWOc
 T+8lqR6c1TLl82lpqIjGFLwvj2eVowq2d3J5jsaIJFd4odmmYVInrhJXOzC/LQ54
 Niloj5ksehf+KUIRLDz7ycppvIHhlVsoAl0eM2dWBAtL0mvT7Nyn/3y+vnMfV2v3
 Flb4opwJUgTJleYc16oxTn9svT2yS8q2uuUemRDLW8ABghoAtH3fUUk43RN+5Krd
 LYCtbeawtkikPVXZMfWybsx5vn0c3Q==
 =7SBe
 -----END PGP SIGNATURE-----

Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache

Pull memory folios from Matthew Wilcox:
 "Add memory folios, a new type to represent either order-0 pages or the
  head page of a compound page. This should be enough infrastructure to
  support filesystems converting from pages to folios.

  The point of all this churn is to allow filesystems and the page cache
  to manage memory in larger chunks than PAGE_SIZE. The original plan
  was to use compound pages like THP does, but I ran into problems with
  some functions expecting only a head page while others expect the
  precise page containing a particular byte.

  The folio type allows a function to declare that it's expecting only a
  head page. Almost incidentally, this allows us to remove various calls
  to VM_BUG_ON(PageTail(page)) and compound_head().

  This converts just parts of the core MM and the page cache. For 5.17,
  we intend to convert various filesystems (XFS and AFS are ready; other
  filesystems may make it) and also convert more of the MM and page
  cache to folios. For 5.18, multi-page folios should be ready.

  The multi-page folios offer some improvement to some workloads. The
  80% win is real, but appears to be an artificial benchmark (postgres
  startup, which isn't a serious workload). Real workloads (eg building
  the kernel, running postgres in a steady state, etc) seem to benefit
  between 0-10%. I haven't heard of any performance losses as a result
  of this series. Nobody has done any serious performance tuning; I
  imagine that tweaking the readahead algorithm could provide some more
  interesting wins. There are also other places where we could choose to
  create large folios and currently do not, such as writes that are
  larger than PAGE_SIZE.

  I'd like to thank all my reviewers who've offered review/ack tags:
  Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes
  Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil
  Babka, William Kucharski, Yu Zhao and Zi Yan.

  I'd also like to thank those who gave feedback I incorporated but
  haven't offered up review tags for this part of the series: Nick
  Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard,
  Hugh Dickins, and probably a few others who I forget"

* tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits)
  mm/writeback: Add folio_write_one
  mm/filemap: Add FGP_STABLE
  mm/filemap: Add filemap_get_folio
  mm/filemap: Convert mapping_get_entry to return a folio
  mm/filemap: Add filemap_add_folio()
  mm/filemap: Add filemap_alloc_folio
  mm/page_alloc: Add folio allocation functions
  mm/lru: Add folio_add_lru()
  mm/lru: Convert __pagevec_lru_add_fn to take a folio
  mm: Add folio_evictable()
  mm/workingset: Convert workingset_refault() to take a folio
  mm/filemap: Add readahead_folio()
  mm/filemap: Add folio_mkwrite_check_truncate()
  mm/filemap: Add i_blocks_per_folio()
  mm/writeback: Add folio_redirty_for_writepage()
  mm/writeback: Add folio_account_redirty()
  mm/writeback: Add folio_clear_dirty_for_io()
  mm/writeback: Add folio_cancel_dirty()
  mm/writeback: Add folio_account_cleaned()
  mm/writeback: Add filemap_dirty_folio()
  ...
2021-11-01 08:47:59 -07:00
Ard Biesheuvel
c1e42efacb ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on Clang
If available, we use the __builtin_thread_pointer() helper to get the
value of the TLS register, to help the compiler understand that it
doesn't need to reload it every time we access 'current'.

Unfortunately, Clang fails to emit the MRC system register read
directly when building for Thumb2, and instead, it issues a call to the
__aeabi_read_tp helper, which the kernel does not provide, and so this
result in link failures at build time.

So create a special case for this, and emit the MRC directly using an
asm() block, just like we do when the helper is not available to begin
with.

Link: https://github.com/ClangBuiltLinux/linux/issues/1485

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-30 11:24:37 +01:00
Ard Biesheuvel
fa191b711c ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=y
The code that implements the rarely used PID_IN_CONTEXTIDR feature
dereferences the 'task' field of struct thread_info directly, and this
is no longer possible when THREAD_INFO_IN_TASK=y, as the 'task' field is
omitted from the struct definition in that case. Instead, we should just
cast the thread_info pointer to a task_struct pointer, given that the
former is now the first member of the latter.

So use a helper that abstracts this, and provide implementations for
both cases.

Reported by: Arnd Bergmann <arnd@arndb.de>

Fixes: 18ed1c01a7 ("ARM: smp: Enable THREAD_INFO_IN_TASK")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-30 11:24:36 +01:00
Nicolas Iooss
0e52fc2e7d ARM: 9147/1: add printf format attribute to early_print()
Adding such an attribute is helpful to detect errors related to printf
formats at compile-time.

Link: https://lore.kernel.org/r/20160828165815.25647-1-nicolas.iooss_linux@m4x.org

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-25 13:12:37 +01:00
Arnd Bergmann
ae3d6978aa ARM: 9145/1: patch: fix BE32 compilation
On BE32 kernels, the __opcode_to_mem_thumb32() interface is intentionally
not defined, but it is referenced whenever runtime patching is enabled
for the kernel, which may be for ftrace, jump label, kprobes or kgdb:

arch/arm/kernel/patch.c: In function '__patch_text_real':
arch/arm/kernel/patch.c:94:32: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
   94 |                         insn = __opcode_to_mem_thumb32(insn);
      |                                ^~~~~~~~~~~~~~~~~~~~~~~

Since BE32 kernels never run Thumb2 code, we never end up using the
result of this call, so providing an extern declaration without
a definition makes it build correctly.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-25 13:12:36 +01:00
Masami Hiramatsu
fed240d9c9 ARM: Recover kretprobe modified return address in stacktrace
Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, arm unwinder shows it
instead of the correct return address.

This finds the correct return address from the per-task
kretprobe_instances list and verify it is in between the
caller fp and callee fp.

Note that this supports both GCC and clang if CONFIG_FRAME_POINTER=y
and CONFIG_ARM_UNWIND=n. For the ARM unwinder, this is still
not working correctly.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-22 12:16:53 -04:00
Lexi Shao
df909df077 ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
ARM: kasan: Fix __get_user_check failure with kasan

In macro __get_user_check defined in arch/arm/include/asm/uaccess.h,
error code is store in register int __e(r0). When kasan is
enabled, assigning value to kernel address might trigger kasan check,
which unexpectedly overwrites r0 and causes undefined behavior on arm
kasan images.

One example is failure in do_futex and results in process soft lockup.
Log:
watchdog: BUG: soft lockup - CPU#0 stuck for 62946ms! [rs:main
Q:Reg:1151]
...
(__asan_store4) from (futex_wait_setup+0xf8/0x2b4)
(futex_wait_setup) from (futex_wait+0x138/0x394)
(futex_wait) from (do_futex+0x164/0xe40)
(do_futex) from (sys_futex_time32+0x178/0x230)
(sys_futex_time32) from (ret_fast_syscall+0x0/0x50)

The soft lockup happens in function futex_wait_setup. The reason is
function get_futex_value_locked always return EINVAL, thus pc jump
back to retry label and causes looping.

This line in function get_futex_value_locked
	ret = __get_user(*dest, from);
is expanded to
	*dest = (typeof(*(p))) __r2; ,
in macro __get_user_check. Writing to pointer dest triggers kasan check
and overwrites the return value of __get_user_x function.
The assembly code of get_futex_value_locked in kernel/futex.c:
...
c01f6dc8:       eb0b020e        bl      c04b7608 <__get_user_4>
// "x = (typeof(*(p))) __r2;" triggers kasan check and r0 is overwritten
c01f6dCc:       e1a00007        mov     r0, r7
c01f6dd0:       e1a05002        mov     r5, r2
c01f6dd4:       eb04f1e6        bl      c0333574 <__asan_store4>
c01f6dd8:       e5875000        str     r5, [r7]
// save ret value of __get_user(*dest, from), which is dest address now
c01f6ddc:       e1a05000        mov     r5, r0
...
// checking return value of __get_user failed
c01f6e00:       e3550000        cmp     r5, #0
...
c01f6e0c:       01a00005        moveq   r0, r5
// assign return value to EINVAL
c01f6e10:       13e0000d        mvnne   r0, #13

Return value is the destination address of get_user thus certainly
non-zero, so get_futex_value_locked always return EINVAL.

Fix it by using a tmp vairable to store the error code before the
assignment. This fix has no effects to non-kasan images thanks to compiler
optimization. It only affects cases that overwrite r0 due to kasan check.

This should fix bug discussed in Link:
[1] https://lore.kernel.org/linux-arm-kernel/0ef7c2a5-5d8b-c5e0-63fa-31693fd4495c@gmail.com/

Fixes: 421015713b ("ARM: 9017/2: Enable KASan for ARM")
Signed-off-by: Lexi Shao <shaolexi@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-19 10:37:35 +01:00
Russell King (Oracle)
b8bc0e50a3 ARM: add __arm_iomem_set_ro() to write-protect ioremapped area
__arm_iomem_set_ro() marks an ioremapped area read-only. This is
intended for use with __arm_ioremap_exec() to allow the kernel to
write some code into e.g. SRAM and then write-protect it so the
kernel doesn't complain about W+X mappings.

Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-19 10:30:56 +01:00
Matthew Wilcox (Oracle)
08b0b0059b mm: Add flush_dcache_folio()
This is a default implementation which calls flush_dcache_page() on
each page in the folio.  If architectures can do better, they should
implement their own version of it.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18 07:49:36 -04:00
Marc Zyngier
ec8f7f3342 clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
Switching from TVAL to CVAL has a small drawback: we need an ISB
before reading the counter. We cannot get rid of it, but we can
instead remove the one that comes just after writing to CVAL.

This reduces the number of ISBs from 3 to 2 when programming
the timer.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-12-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:47:44 +02:00
Marc Zyngier
8b82c4f883 clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
Similarily to the sysreg-based timer, move the MMIO over to using
the CVAL registers instead of TVAL. Note that there is no warranty
that the 64bit MMIO access will be atomic, but the timer is always
disabled at the point where we program CVAL.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-8-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:47:21 +02:00
Marc Zyngier
a38b71b083 clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
In order to cope better with high frequency counters, move the
programming of the timers from the countdown timer (TVAL) over
to the comparator (CVAL).

The programming model is slightly different, as we now need to
read the current counter value to have an absolute deadline
instead of a relative one.

There is a small overhead to this change, which we will address
in the following patches.

Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-5-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:47:05 +02:00
Marc Zyngier
1e8d929231 clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
The various accessors for the timer sysreg and MMIO registers are
currently hardwired to 32bit. However, we are about to introduce
the use of the CVAL registers, which require a 64bit access.

Upgrade the write side of the accessors to take a 64bit value
(the read side is left untouched as we don't plan to ever read
back any of these registers).

No functional change expected.

Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-4-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:46:59 +02:00
Marc Zyngier
d72689988d clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
The arch timer driver never reads the various TVAL registers, only
writes to them. It is thus pointless to provide accessors
for them and to implement errata workarounds.

Drop these read-side accessors, and add a couple of BUG() statements
for the time being. These statements will be removed further down
the line.

Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-3-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:46:50 +02:00
Marc Zyngier
4775bc63f8 clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
As we are about to change the registers that are used by the driver,
start by adding build-time checks to ensure that we always handle
all registers and access modes.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-2-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17 21:45:48 +02:00
Kees Cook
42a20f86dc sched: Add wrapper for get_wchan() to keep task blocked
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
2021-10-15 11:25:14 +02:00
Ard Biesheuvel
18ed1c01a7 ARM: smp: Enable THREAD_INFO_IN_TASK
Now that we no longer rely on thread_info living at the base of the task
stack to be able to access the 'current' pointer, we can wire up the
generic support for moving thread_info into the task struct itself.

Note that this requires us to update the cpu field in thread_info
explicitly, now that the core code no longer does so. Ideally, we would
switch the percpu code to access the cpu field in task_struct instead,
but this unleashes #include circular dependency hell.

Co-developed-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
2021-09-27 16:54:02 +02:00
Ard Biesheuvel
50596b7559 ARM: smp: Store current pointer in TPIDRURO register if available
Now that the user space TLS register is assigned on every return to user
space, we can use it to keep the 'current' pointer while running in the
kernel. This removes the need to access it via thread_info, which is
located at the base of the stack, but will be moved out of there in a
subsequent patch.

Use the __builtin_thread_pointer() helper when available - this will
help GCC understand that reloading the value within the same function is
not necessary, even when using the per-task stack protector (which also
generates accesses via the TLS register). For example, the generated
code below loads TPIDRURO only once, and uses it to access both the
stack canary and the preempt_count fields.

<do_one_initcall>:
       e92d 41f0       stmdb   sp!, {r4, r5, r6, r7, r8, lr}
       ee1d 4f70       mrc     15, 0, r4, cr13, cr0, {3}
       4606            mov     r6, r0
       b094            sub     sp, #80 ; 0x50
       f8d4 34e8       ldr.w   r3, [r4, #1256] ; 0x4e8  <- stack canary
       9313            str     r3, [sp, #76]   ; 0x4c
       f8d4 8004       ldr.w   r8, [r4, #4]             <- preempt count

Co-developed-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
2021-09-27 16:54:02 +02:00
Ard Biesheuvel
3855ab614d ARM: smp: Free up the TLS register while running in the kernel
To prepare for a subsequent patch that stores the current task pointer
in the user space TLS register while running in the kernel, modify the
set_tls and switch_tls routines not to touch the register directly, and
update the return to user space code to load the correct value.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
2021-09-27 16:54:02 +02:00
Keith Packard
19f29aebd9 ARM: smp: Pass task to secondary_start_kernel
This avoids needing to compute the task pointer in this function, which
will no longer be possible once we move thread_info off the stack.

Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
2021-09-27 16:54:01 +02:00
Ard Biesheuvel
dfbdcda280 gcc-plugins: arm-ssp: Prepare for THREAD_INFO_IN_TASK support
We will be enabling THREAD_INFO_IN_TASK support for ARM, which means
that we can no longer load the stack canary value by masking the stack
pointer and taking the copy that lives in thread_info. Instead, we will
be able to load it from the task_struct directly, by using the TPIDRURO
register which will hold the current task pointer when
THREAD_INFO_IN_TASK is in effect. This is much more straight-forward,
and allows us to declutter this code a bit while at it.

Note that this means that ARMv6 (non-v6K) SMP systems can no longer use
this feature, but those are quite rare to begin with, so this is a
reasonable trade off.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
2021-09-27 16:54:01 +02:00
Peter Collingbourne
7962c2eddb
arch: remove unused function syscall_set_arguments()
This function appears to have been unused since it was first introduced in
commit 828c365cc8 ("tracehook: asm/syscall.h").

Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I8ce04f002903a37c0b6c1d16e9b2a3afa716c097
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-09-14 16:06:20 +02:00
Linus Torvalds
35776f1051 ARM development updates for 5.15:
- Rename "mod_init" and "mod_exit" so that initcall debug output is
   actually useful (Randy Dunlap)
 - Update maintainers entries for linux-arm-kernel to indicate it is
   moderated for non-subscribers (Randy Dunlap)
 - Move install rules to arch/arm/Makefile (Masahiro Yamada)
 - Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij)
 - Don't warn about atags_to_fdt() stack size (David Heidelberg)
 - Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann)
 - Get rid of set_fs() usage (Arnd Bergmann)
 - Remove checks for GCC prior to v4.6 (Geert Uytterhoeven)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmE6GkAACgkQ9OeQG+St
 rGS7HhAAokcdC80ZOJJ+vT/J4sqpTdfTnJmImhkKOKgcw9yBFt7JBuA/6mp6/EV0
 2Jd2RpeKG3S8PRlMWE4hGmyIla94r0olDvdh57+4AB/xrSfPO7l7EiaW2xLi0i3F
 KMysXxxKgbfckoNqPtiYF71cKkUKbZa169t8PyiiW5XYVQncnVGIbmEy69MJCg9n
 08NUtkKoDgHkS6hXDVDLoFsGJX5P7X5IDPx6og233qBWRzWgcn1NURfJKD0F7/l+
 UPnftUAF8JZp0rhtF2RH1IOu2v2MOVUsrK7D5OjzUEdMSleTN2oX3hmF4HPsG8eJ
 LeTKJfxoiX3JdWRlmUjomRU6eDqLAIMKsZ0wWoupQTaCq3WHs/mnxEOKY9n/UYGk
 eQdgb/EQQ5gDUok2WQOxG+Q85s29d14isQnoNa1D0O2YzTK7JiQ6YrASkZWVNLnT
 Zuw5vDtKk+7NV7QczTl9nHnPWIsRaZr40MXbTIROUO+aPoTxt6lPkv/dqUltrbEg
 6Ix/8XsbtAgz8/UEDNz69RYA2DyzDBTO5VLdJutDsXliTAkY+HkqcORTFd72BvWX
 JEO/xg037a8x5vGpu/t0s+nmDgfy79Yi21u7i3MSjf2FiH09bOUhf7tiuhHVzb97
 3po8S/YRiIsJWC1NpMpYFBYeCtJonMJycM05ff6MrLyvLYU2xbs=
 =Tx+y
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM development updates from Russell King:

 - Rename "mod_init" and "mod_exit" so that initcall debug output is
   actually useful (Randy Dunlap)

 - Update maintainers entries for linux-arm-kernel to indicate it is
   moderated for non-subscribers (Randy Dunlap)

 - Move install rules to arch/arm/Makefile (Masahiro Yamada)

 - Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij)

 - Don't warn about atags_to_fdt() stack size (David Heidelberg)

 - Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann)

 - Get rid of set_fs() usage (Arnd Bergmann)

 - Remove checks for GCC prior to v4.6 (Geert Uytterhoeven)

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9118/1: div64: Remove always-true __div64_const32_is_OK() duplicate
  ARM: 9117/1: asm-generic: div64: Remove always-true __div64_const32_is_OK()
  ARM: 9116/1: unified: Remove check for gcc < 4
  ARM: 9110/1: oabi-compat: fix oabi epoll sparse warning
  ARM: 9113/1: uaccess: remove set_fs() implementation
  ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault
  ARM: 9111/1: oabi-compat: rework fcntl64() emulation
  ARM: 9114/1: oabi-compat: rework sys_semtimedop emulation
  ARM: 9108/1: oabi-compat: rework epoll_wait/epoll_pwait emulation
  ARM: 9107/1: syscall: always store thread_info->abi_syscall
  ARM: 9109/1: oabi-compat: add epoll_pwait handler
  ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()
  ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault
  ARM: 9105/1: atags_to_fdt: don't warn about stack size
  ARM: 9103/1: Drop ARCH_NR_GPIOS definition
  ARM: 9102/1: move theinstall rules to arch/arm/Makefile
  ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated
  ARM: 9099/1: crypto: rename 'mod_init' & 'mod_exit' functions to be module-specific
2021-09-09 13:25:49 -07:00
Linus Torvalds
14726903c8 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "173 patches.

  Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
  pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
  bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
  hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
  oom-kill, migration, ksm, percpu, vmstat, and madvise)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
  mm/madvise: add MADV_WILLNEED to process_madvise()
  mm/vmstat: remove unneeded return value
  mm/vmstat: simplify the array size calculation
  mm/vmstat: correct some wrong comments
  mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
  selftests: vm: add COW time test for KSM pages
  selftests: vm: add KSM merging time test
  mm: KSM: fix data type
  selftests: vm: add KSM merging across nodes test
  selftests: vm: add KSM zero page merging test
  selftests: vm: add KSM unmerge test
  selftests: vm: add KSM merge test
  mm/migrate: correct kernel-doc notation
  mm: wire up syscall process_mrelease
  mm: introduce process_mrelease system call
  memblock: make memblock_find_in_range method private
  mm/mempolicy.c: use in_task() in mempolicy_slab_node()
  mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
  mm/mempolicy: advertise new MPOL_PREFERRED_MANY
  mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
  ...
2021-09-03 10:08:28 -07:00