This tag contains two small commits since rc1:
- Add a .mailmap entry requested by Asahi Lina to better filter her
emails
- Mark the power domains for the touchbar support introduced with 6.15
as always on since the driver cannot initialize the touchbar from
scratch after the domains are powered off (e.g. during suspend).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaAj9TQAKCRBEEX0kKnUe
6UqPAP9Qjep3S12BKIReeAmjICirSP+Psp+n9G7mGMucEvw99QEAiSqYJ632k3rb
fYOgTvf0GNF5TNCwfhmqIqu/fNOKfA8=
=21TP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=j+tN
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-fixes-6.15' of https://github.com/AsahiLinux/linux into arm/fixes
Apple SoC fixes for 6.15
This tag contains two small commits since rc1:
- Add a .mailmap entry requested by Asahi Lina to better filter her
emails
- Mark the power domains for the touchbar support introduced with 6.15
as always on since the driver cannot initialize the touchbar from
scratch after the domains are powered off (e.g. during suspend).
* tag 'asahi-soc-fixes-6.15' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
Link: https://lore.kernel.org/r/20250423145047.3098-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
a number of smaller fixes: Turing RK1 fan can spin down again, fixed pins,
pinmuxing and clocks and some devicetree-correctnes improvements.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmgXxVwQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVHzB/wJZ0ztk8moYIK/6OVk7lPxkfIPuD59frHt
EAz7COX8WqLni3q18FfqkjlONkXXbnRY//9cuw6ReLaFDJw3l5LcNtv1xLzxFi84
Z2O/mzeotTnoJN5PRhQXKn+aqU+zb4GRaJQvUAXKVgwJJSpOLS49j68108Pd8ckv
miv/X9iaLM6eZNjfixSaZjAlbE72npSATNi+HmKLWg/KceiZgSAoyV5Ar1pZqnDh
slgMScCfUu80sYRzYit9jGBDQWlP8iBSch/9RF9j00TDG8EkZ2Q+VYbu4wX/LzFB
78R1X4ZWj3b+0J8vYwGZc8Aa/oC5yI969SSS+WypL0N8XJojKkDV
=+au0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+lfn
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Removal of operating-points above what the rk3588j soc is rated for, and
a number of smaller fixes: Turing RK1 fan can spin down again, fixed pins,
pinmuxing and clocks and some devicetree-correctnes improvements.
* tag 'v6.15-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
Link: https://lore.kernel.org/r/2923598.88bMQJbFj6@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The fernsehfee3 board uses a Ricoh RN5T618 PMIC to generate various
voltages. Board schematics are not available, but the regulator voltages
found in /sys/kernel/debug/regulator/regulator_summary match those in
meson8m2-mxiii-plus.dts:
DCDC1 0 0 0 unknown 1100mV 0mA 0mV 0mV
DCDC2 0 0 0 unknown 1150mV 0mA 0mV 0mV
DCDC3 0 0 0 unknown 1500mV 0mA 0mV 0mV
LDO1 0 0 0 unknown 2900mV 0mA 0mV 0mV
LDO2 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDO3 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDO4 0 0 0 unknown 2850mV 0mA 0mV 0mV
LDO5 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDORTC1 0 0 0 unknown 2700mV 0mA 0mV 0mV
LDORTC2 0 0 0 unknown 900mV 0mA 0mV 0mV
This patch takes the following approach:
- Copy RN5T618 regulator nodes from meson8m2-mxiii-plus.dts
- Remove some of the regulator names, which do not seem to apply
- Verify regulator supply relations by starting without any relations
(and without regulator-always-on) and seeing what breaks when the
kernel turns off "unused" regulators.
This results in the following observations:
- When LDO1 is turned off, the board resets
- When DCDC1, DCDC2, DCDC3, LDO2, or LDO5 are turned off, the board (as
observed through the serial port) stops running, so these must stay on
at all times.
- LDO4 (VCC2V8) appears to be unused on this board.
- LDO3 (VCC1V8_USB) must stay on in order for USB to work, both the
external USB ports and the internal USB wifi module.
The cpu-supply and mali-supply relations are also copied from
meson8m2-mxiii-plus.dts
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-4-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fernsehfee[1] ("TV fairy") 3.0 is a set-top box with HDMI input and
output ports. It originally ran Android 4.4 and a Linux 3.10 kernel.
The following features are tested and known to work:
- Ethernet
- Power LED (switching between green and red)
- Power button
- eMMC
- SD Card
- USB
- Wifi
The following features are untested or not working:
- HDMI input and output
- Infrared remote control input and output
[1]: https://fernsehfee.de/ (German), https://telefairy.com/ (English)
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-3-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fernsehfee ("TV fairy") 3.0 is a set-top box with HDMI input and output
ports. It originally ran Android 4.4 and a Linux 3.10 kernel.
https://fernsehfee.de/ (German)
https://telefairy.com/ (English)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-2-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
TC Unterhaltungselektronik is the company behind Fernsehfee branded
set-top boxes.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-1-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
tl;dr: There is a window in the mm switching code where the new CR3 is
set and the CPU should be getting TLB flushes for the new mm. But
should_flush_tlb() has a bug and suppresses the flush. Fix it by
widening the window where should_flush_tlb() sends an IPI.
Long Version:
=== History ===
There were a few things leading up to this.
First, updating mm_cpumask() was observed to be too expensive, so it was
made lazier. But being lazy caused too many unnecessary IPIs to CPUs
due to the now-lazy mm_cpumask(). So code was added to cull
mm_cpumask() periodically[2]. But that culling was a bit too aggressive
and skipped sending TLB flushes to CPUs that need them. So here we are
again.
=== Problem ===
The too-aggressive code in should_flush_tlb() strikes in this window:
// Turn on IPIs for this CPU/mm combination, but only
// if should_flush_tlb() agrees:
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
load_new_mm_cr3(need_flush);
// ^ After 'need_flush' is set to false, IPIs *MUST*
// be sent to this CPU and not be ignored.
this_cpu_write(cpu_tlbstate.loaded_mm, next);
// ^ Not until this point does should_flush_tlb()
// become true!
should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3()
and writing to 'loaded_mm', which is a window where they should not be
suppressed. Whoops.
=== Solution ===
Thankfully, the fuzzy "just about to write CR3" window is already marked
with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in
should_flush_tlb() is sufficient to ensure that the CPU is targeted with
an IPI.
This will cause more TLB flush IPIs. But the window is relatively small
and I do not expect this to cause any kind of measurable performance
impact.
Update the comment where LOADED_MM_SWITCHING is written since it grew
yet another user.
Peter Z also raised a concern that should_flush_tlb() might not observe
'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off()
writes them. Add a barrier to ensure that they are observed in the
order they are written.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ [1]
Fixes: 6db2526c1d ("x86/mm/tlb: Only trim the mm_cpumask once a second") [2]
Reported-by: Stephen Dolan <sdolan@janestreet.com>
Cc: stable@vger.kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert mx2{3,8} dts files to use the padconfig macros defined in
mxs-pinfunc.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add initial support for PHYTEC phyBOARD-Nash-i.MX93 board [1] based on
the PHYTEC phyCORE-i.MX93 SoM (System-on-Module) [2].
Supported board features:
* ADC
* CAN
* Ethernet
* EEPROM
* RTC
* RS-232/RS-485
* SD-card
* TPM 2.0
* USB
For more details see the product pages for the development kit and the
SoM:
[1] https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
[2] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add devicetree bindings for PHYTEC phyBOARD-Nash-i.MX93 board based on
the existing PHYTEC phyCORE-i.MX93 SoM (System-on-Module).
Adjust the compatibles for the existing phyBOARD-Segin-i.MX93 board, to
be able to add additional board based on the phyCORE-i.MX93 SoM.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix SD card timeout issue caused by LDO5 regulator getting disabled
after boot.
The kernel log shows LDO5 being disabled, which leads to a timeout
on USDHC2:
[ 33.760561] LDO5: disabling
[ 81.119861] mmc1: Timeout waiting for hardware interrupt.
To prevent this, set regulator-boot-on and regulator-always-on for
LDO5. Also add the vqmmc regulator to properly support 1.8V/3.3V
signaling for USDHC2 using a GPIO-controlled regulator.
Fixes: 6c2a1f4f71 ("arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM")
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Acked-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable config for Toradex SMARC Embedded Controller, this is required
for proper reset and power-off functionalities on Toradex SMARC iMX8M
Plus.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use generic node name for the SoM GPIO expander, following the
Devicetree Specification generic node names recommendation.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add gpio expander node to the device tree and the related nodes.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the embedded controller node to the device tree, this is required
for reset and power-off functionalities.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Configure correctly the FAN pwm output (inverted).
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using the MDIO pins with Open Drain causes spec violations of the
signals. Revert the changes.
This is similar to commit 14e66e4b13 ("Revert "arm64: dts:
imx93-tqma9352-mba93xxca: enable Open Drain for MDIO"")
Fixes: e5bc07026f ("arm64: add initial device tree for TQMa93xx/MBa91xxCA")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa95xxSA is a SOM using NXP i.MX95 CPU. MB-SMARC-2 is a carrier
reference design.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add initial support for TQMa95xxSA module compatible to SMARC-2.
There is a common device tree for all variants with e.g. reduced CPU count.
It supports LPUART7 for console, CAN, PCIe I2C, SPI, USB3.0, USB2.0, Audio,
SDHC1/2 and QSPI as storage.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, when ARM64 displays CPU information, every call to c_show()
assembles all CPU information. However, as the number of CPUs increases,
this can lead to insufficient buffer space due to excessive assembly in
a single call, causing repeated expansion and multiple calls to c_show().
To prevent this invalid c_show() call, only one CPU's information is
assembled each time c_show() is called.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20250421062947.4072855-1-yebin@huaweicloud.com
Signed-off-by: Will Deacon <will@kernel.org>
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver exposes the non volatile memory using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Srinivas Kandagatla <srini@kernel.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-3-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver supports the GPIO functions using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-2-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This describes the top-level device.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250325-max77759-mfd-v6-3-c0870ca662ba@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This describes its storage module (NVMEM).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250325-max77759-mfd-v6-2-c0870ca662ba@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This describes its GPIO module.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250325-max77759-mfd-v6-1-c0870ca662ba@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx8mm-var-som-symphony.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8XQPS and TQMa8XDPS modules on MB-SMARC-2 board.
As the only difference is the mounted SoC, both module and baseboard
files are shared.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8XxS is a SOM series featuring NXP i.MX8X SoC.
They are called TQMa8XQPS and TQMa8XDPS respectively.
MB-SMARC-2 is a carrier reference design.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This overlay configures IMX219 MIPI-CSI-2 camera attached to ISP1.
Also add additional overlay both using LVDS display and camera.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
io_queue_deferred() is not tolerant to spurious calls not completing
some requests. You can have an inflight drain-marked request and another
request that came after and got queued into the drain list. Now, if
io_queue_deferred() is called before the first request completes, it'll
check the 2nd req with req_need_defer(), find that there is no drain
flag set, and queue it for execution.
To make io_queue_deferred() work, it should at least check sequences for
the first request, and then we need also need to check if there is
another drain request creating another bubble.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/972bde11b7d4ef25b3f5e3fd34f80e4d2aa345b8.1746788718.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The LVDS interface is the same as for MBa8MPxL so the already existing
overlay can be reused on this platform.
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some of the debug sysfs attributes for runtime PM are located
in the power_attrs[] table, so they are exposed even in the
pm_runtime_has_no_callbacks() case, unlike the other non-debug
sysfs attributes for runtime PM, which may be confusing.
Moreover, dev_attr_runtime_status.attr appears in two
places, which effectively causes it to be always exposed if
CONFIG_PM_ADVANCED_DEBUG is set, but otherwise it is exposed
only when pm_runtime_has_no_callbacks() returns 'false'.
Address this by putting all sysfs attributes for runtime PM into
runtime_attrs[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12677254.O9o76ZdvQC@rjwysocki.net
Turn the default 5 second test delay for hibernation into a
configurable module parameter, so users can determine how
long to wait in this pseudo-hibernate state before resuming
the system.
The configurable delay parameter has been added for suspend, so
add an analogous one for hibernation.
Example (wait 30 seconds);
# echo 30 > /sys/module/hibernate/parameters/pm_test_delay
# echo core > /sys/power/pm_test
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20250507063520.419635-1-zhangzihuan@kylinos.cn
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Our QA team reported a 10%-23%, throughput reduction on an io_uring
sqpoll testcase doing IO to a null_blk, that I traced back to a
reduction of the device submission queue depth utilization. It turns out
that, after commit af5d68f889 ("io_uring/sqpoll: manage task_work
privately"), we capped the number of task_work entries that can be
completed from a single spin of sqpoll to only 8 entries, before the
sqpoll goes around to (potentially) sleep. While this cap doesn't drive
the submission side directly, it impacts the completion behavior, which
affects the number of IO queued by fio per sqpoll cycle on the
submission side, and io_uring ends up seeing less ios per sqpoll cycle.
As a result, block layer plugging is less effective, and we see more
time spent inside the block layer in profilings charts, and increased
submission latency measured by fio.
There are other places that have increased overhead once sqpoll sleeps
more often, such as the sqpoll utilization calculation. But, in this
microbenchmark, those were not representative enough in perf charts, and
their removal didn't yield measurable changes in throughput. The major
overhead comes from the fact we plug less, and less often, when submitting
to the block layer.
My benchmark is:
fio --ioengine=io_uring --direct=1 --iodepth=128 --runtime=300 --bs=4k \
--invalidate=1 --time_based --ramp_time=10 --group_reporting=1 \
--filename=/dev/nullb0 --name=RandomReads-direct-nullb-sqpoll-4k-1 \
--rw=randread --numjobs=1 --sqthread_poll
In one machine, tested on top of Linux 6.15-rc1, we have the following
baseline:
READ: bw=4994MiB/s (5236MB/s), 4994MiB/s-4994MiB/s (5236MB/s-5236MB/s), io=439GiB (471GB), run=90001-90001msec
With this patch:
READ: bw=5762MiB/s (6042MB/s), 5762MiB/s-5762MiB/s (6042MB/s-6042MB/s), io=506GiB (544GB), run=90001-90001msec
which is a 15% improvement in measured bandwidth. The average
submission latency is noticeably lowered too. As measured by
fio:
Baseline:
lat (usec): min=20, max=241, avg=99.81, stdev=3.38
Patched:
lat (usec): min=26, max=226, avg=86.48, stdev=4.82
If we look at blktrace, we can also see the plugging behavior is
improved. In the baseline, we end up limited to plugging 8 requests in
the block layer regardless of the device queue depth size, while after
patching we can drive more io, and we manage to utilize the full device
queue.
In the baseline, after a stabilization phase, an ordinary submission
looks like:
254,0 1 49942 0.016028795 5977 U N [iou-sqp-5976] 7
After patching, I see consistently more requests per unplug.
254,0 1 4996 0.001432872 3145 U N [iou-sqp-3144] 32
Ideally, the cap size would at least be the deep enough to fill the
device queue, but we can't predict that behavior, or assume all IO goes
to a single device, and thus can't guess the ideal batch size. We also
don't want to let the tw run unbounded, though I'm not sure it would
really be a problem. Instead, let's just give it a more sensible value
that will allow for more efficient batching. I've tested with different
cap values, and initially proposed to increase the cap to 1024. Jens
argued it is too big of a bump and I observed that, with 32, I'm no
longer able to observe this bottleneck in any of my machines.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20250508181203.3785544-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>