mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,412,257 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
9d85ac939d |
cifs: Fix handling of a beyond-EOF DIO/unbuffered read over SMB1
If a DIO read or an unbuffered read request extends beyond the EOF, the
server will return a short read and a status code indicating that EOF was
hit, which gets translated to -ENODATA. Note that the client does not cap
the request at i_size, but asks for the amount requested in case there's a
race on the server with a third party.
Now, on the client side, the request will get split into multiple
subrequests if rsize is smaller than the full request size. A subrequest
that starts before or at the EOF and returns short data up to the EOF will
be correctly handled, with the NETFS_SREQ_HIT_EOF flag being set,
indicating to netfslib that we can't read more.
If a subrequest, however, starts after the EOF and not at it, HIT_EOF will
not be flagged, its error will be set to -ENODATA and it will be abandoned.
This will cause the request as a whole to fail with -ENODATA.
Fix this by setting NETFS_SREQ_HIT_EOF on any subrequest that lies beyond
the EOF marker.
This can be reproduced by mounting with "cache=none,sign,vers=1.0" and
doing a read of a file that's significantly bigger than the size of the
file (e.g. attempting to read 64KiB from a 16KiB file).
Fixes:
|
||
Linus Torvalds
|
7cd122b552 |
Some filesystems use a kinda-sorta controlled dentry refcount leak to pin
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
||
|
Linus Torvalds
|
7203ca412f |
Significant patch series in this merge are as follows:
- The 10 patch series "__vmalloc()/kvmalloc() and no-block support" from
Uladzislau Rezki reworks the vmalloc() code to support non-blocking
allocations (GFP_ATOIC, GFP_NOWAIT).
- The 2 patch series "ksm: fix exec/fork inheritance" from xu xin fixes
a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not inherited
across fork/exec.
- The 4 patch series "mm/zswap: misc cleanup of code and documentations"
from SeongJae Park does some light maintenance work on the zswap code.
- The 5 patch series "mm/page_owner: add debugfs files 'show_handles'
and 'show_stacks_handles'" from Mauricio Faria de Oliveira enhances the
/sys/kernel/debug/page_owner debug feature. It adds unique identifiers
to differentiate the various stack traces so that userspace monitoring
tools can better match stack traces over time.
- The 2 patch series "mm/page_alloc: pcp->batch cleanups" from Joshua
Hahn makes some minor alterations to the page allocator's per-cpu-pages
feature.
- The 2 patch series "Improve UFFDIO_MOVE scalability by removing
anon_vma lock" from Lokesh Gidra addresses a scalability issue in
userfaultfd's UFFDIO_MOVE operation.
- The 2 patch series "kasan: cleanups for kasan_enabled() checks" from
Sabyrzhan Tasbolatov performs some cleanup in the KASAN code.
- The 2 patch series "drivers/base/node: fold node register and
unregister functions" from Donet Tom cleans up the NUMA node handling
code a little.
- The 4 patch series "mm: some optimizations for prot numa" from Kefeng
Wang provides some cleanups and small optimizations to the NUMA
allocation hinting code.
- The 5 patch series "mm/page_alloc: Batch callers of
free_pcppages_bulk" from Joshua Hahn addresses long lock hold times at
boot on large machines. These were causing (harmless) softlockup
warnings.
- The 2 patch series "optimize the logic for handling dirty file folios
during reclaim" from Baolin Wang removes some now-unnecessary work from
page reclaim.
- The 10 patch series "mm/damon: allow DAMOS auto-tuned for per-memcg
per-node memory usage" from SeongJae Park enhances the DAMOS auto-tuning
feature.
- The 2 patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan fixes DAMON_LRU_SORT
and DAMON_RECLAIM with certain userspace configuration.
- The 15 patch series "expand mmap_prepare functionality, port more
users" from Lorenzo Stoakes enhances the new(ish)
file_operations.mmap_prepare() method and ports additional callsites
from the old ->mmap() over to ->mmap_prepare().
- The 8 patch series "Fix stale IOTLB entries for kernel address space"
from Lu Baolu fixes a bug (and possible security issue on non-x86) in
the IOMMU code. In some situations the IOMMU could be left hanging onto
a stale kernel pagetable entry.
- The 4 patch series "mm/huge_memory: cleanup __split_unmapped_folio()"
from Wei Yang cleans up and optimizes the folio splitting code.
- The 5 patch series "mm, swap: misc cleanup and bugfix" from Kairui
Song implements some cleanups and a minor fix in the swap discard code.
- The 8 patch series "mm/damon: misc documentation fixups" from SeongJae
Park does as advertised.
- The 9 patch series "mm/damon: support pin-point targets removal" from
SeongJae Park permits userspace to remove a specific monitoring target
in the middle of the current targets list.
- The 2 patch series "mm: MISC follow-up patches for linux/pgalloc.h"
from Harry Yoo implements a couple of cleanups related to mm header file
inclusion.
- The 2 patch series "mm/swapfile.c: select swap devices of default
priority round robin" from Baoquan He improves the selection of swap
devices for NUMA machines.
- The 3 patch series "mm: Convert memory block states (MEM_*) macros to
enums" from Israel Batista changes the memory block labels from macros
to enums so they will appear in kernel debug info.
- The 3 patch series "ksm: perform a range-walk to jump over holes in
break_ksm" from Pedro Demarchi Gomes addresses an inefficiency when KSM
unmerges an address range.
- The 22 patch series "mm/damon/tests: fix memory bugs in kunit tests"
from SeongJae Park fixes leaks and unhandled malloc() failures in DAMON
userspace unit tests.
- The 2 patch series "some cleanups for pageout()" from Baolin Wang
cleans up a couple of minor things in the page scanner's
writeback-for-eviction code.
- The 2 patch series "mm/hugetlb: refactor sysfs/sysctl interfaces" from
Hui Zhu moves hugetlb's sysfs/sysctl handling code into a new file.
- The 9 patch series "introduce VM_MAYBE_GUARD and make it sticky" from
Lorenzo Stoakes makes the VMA guard regions available in /proc/pid/smaps
and improves the mergeability of guarded VMAs.
- The 2 patch series "mm: perform guard region install/remove under VMA
lock" from Lorenzo Stoakes reduces mmap lock contention for callers
performing VMA guard region operations.
- The 2 patch series "vma_start_write_killable" from Matthew Wilcox
starts work in permitting applications to be killed when they are
waiting on a read_lock on the VMA lock.
- The 11 patch series "mm/damon/tests: add more tests for online
parameters commit" from SeongJae Park adds additional userspace testing
of DAMON's "commit" feature.
- The 9 patch series "mm/damon: misc cleanups" from SeongJae Park does
that.
- The 2 patch series "make VM_SOFTDIRTY a sticky VMA flag" from Lorenzo
Stoakes addresses the possible loss of a VMA's VM_SOFTDIRTY flag when
that VMA is merged with another.
- The 16 patch series "mm: support device-private THP" from Balbir Singh
introduces support for Transparent Huge Page (THP) migration in zone
device-private memory.
- The 3 patch series "Optimize folio split in memory failure" from Zi
Yan optimizes folio split operations in the memory failure code.
- The 2 patch series "mm/huge_memory: Define split_type and consolidate
split support checks" from Wei Yang provides some more cleanups in the
folio splitting code.
- The 16 patch series "mm: remove is_swap_[pte, pmd]() + non-swap
entries, introduce leaf entries" from Lorenzo Stoakes cleans up our
handling of pagetable leaf entries by introducing the concept of
'software leaf entries', of type softleaf_t.
- The 4 patch series "reparent the THP split queue" from Muchun Song
reparents the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory resources.
- The 3 patch series "unify PMD scan results and remove redundant
cleanup" from Wei Yang does a little cleanup in the hugepage collapse
code.
- The 6 patch series "zram: introduce writeback bio batching" from
Sergey Senozhatsky improves zram writeback efficiency by introducing
batched bio writeback support.
- The 4 patch series "memcg: cleanup the memcg stats interfaces" from
Shakeel Butt cleans up our handling of the interrupt safety of some
memcg stats.
- The 4 patch series "make vmalloc gfp flags usage more apparent" from
Vishal Moola cleans up vmalloc's handling of incoming GFP flags.
- The 6 patch series "mm: Add soft-dirty and uffd-wp support for RISC-V"
from Chunyan Zhang teches soft dirty and userfaultfd write protect
tracking to use RISC-V's Svrsw60t59b extension.
- The 5 patch series "mm: swap: small fixes and comment cleanups" from
Youngjun Park fixes a small bug and cleans up some of the swap code.
- The 4 patch series "initial work on making VMA flags a bitmap" from
Lorenzo Stoakes starts work on converting the vma struct's flags to a
bitmap, so we stop running out of them, especially on 32-bit.
- The 2 patch series "mm/swapfile: fix and cleanup swap list iterations"
from Youngjun Park addresses a possible bug in the swap discard code and
cleans things up a little.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTEb0wAKCRDdBJ7gKXxA
jjfIAP94W4EkCCwNOupnChoG+YWw/JW21anXt5NN+i5svn1yugEAwzvv6A+cAFng
o+ug/fyrfPZG7PLp2R8WFyGIP0YoBA4=
=IUzS
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit
|
||
Maurice Hieronymus
|
c5108c58b9 |
tracing: Fix typo in trace_seq.c
Fix typo "wont" to "won't". Link: https://patch.msgid.link/20251121221835.28032-15-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
0f17df72a7 |
tracing: Fix typo in trace_probe.c
Fix typo "separater" to "separator". Link: https://patch.msgid.link/20251121221835.28032-14-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
fa3f733d97 |
tracing: Fix multiple typos in trace_osnoise.c
Fix multiple typos in comments: "Anotate" -> "Annotate" "infor" -> "info" "timestemp" -> "timestamp" "tread" -> "thread" "varaibles" -> "variables" "wast" -> "waste" Link: https://patch.msgid.link/20251121221835.28032-13-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
6ce5725d73 |
tracing: Fix multiple typos in trace_events_user.c
Fix multiple typos in comments: "ambigious" -> "ambiguous" "explictly" -> "explicitly" "Uknown" -> "Unknown" Link: https://patch.msgid.link/20251121221835.28032-12-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
0166d3e31a |
tracing: Fix typo in trace_events_trigger.c
Fix typo "componenents" to "components". Link: https://patch.msgid.link/20251121221835.28032-11-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
c29e75532e |
tracing: Fix typo in trace_events_hist.c
Fix typo "tigger" to "trigger". Link: https://patch.msgid.link/20251121221835.28032-10-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
86f320904e |
tracing: Fix typo in trace_events_filter.c
Fix typo "singe" to "single". Link: https://patch.msgid.link/20251121221835.28032-9-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
d4290963d5 |
tracing: Fix multiple typos in trace_events.c
Fix multiple typos in comments: "appened" -> "appended" "paranthesis" -> "parenthesis" "parethesis" -> "parenthesis" "wont" -> "won't" Link: https://patch.msgid.link/20251121221835.28032-8-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
8d4cdbd45c |
tracing: Fix multiple typos in trace.c
Fix multiple typos in comments: "alse" -> "also" "enabed" -> "enabled" "instane" -> "instance" "outputing" -> "outputting" "seperated" -> "separated" Link: https://patch.msgid.link/20251121221835.28032-7-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
81354f6335 |
tracing: Fix typo in ring_buffer_benchmark.c
Fix typo "overwite" to "overwrite". Link: https://patch.msgid.link/20251121221835.28032-6-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
1edb820ae9 |
tracing: Fix multiple typos in ring_buffer.c
Fix multiple typos in comments: "ording" -> "ordering" "scatch" -> "scratch" "wont" -> "won't" Link: https://patch.msgid.link/20251121221835.28032-5-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
2ec7345c2d |
tracing: Fix typo in fprobe.c
Fix typo "funciton" to "function". Link: https://patch.msgid.link/20251121221835.28032-4-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Maurice Hieronymus
|
9c3f3b8fea |
tracing: Fix typo in fpgraph.c
Fix typo "reservered" to "reserved". Link: https://patch.msgid.link/20251121221835.28032-3-mhi@mailbox.org Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Steven Rostedt
|
47ef834209 |
tracing: Fix fixed array of synthetic event
The commit |
||
|
Steven Rostedt
|
02e7769e38 |
tracing: Fix enabling of tracing on file release
The trace file will pause tracing if the tracing instance has the
"pause-on-trace" option is set. This happens when the file is opened, and
it is unpaused when the file is closed. When this was first added, there
was only one user that paused tracing. On open, the check to pause was:
if (!iter->snapshot && (tr->trace_flags & TRACE_ITER(PAUSE_ON_TRACE)))
Where if it is not the snapshot tracer and the "pause-on-trace" option is
set, then it increments a "stop_count" of the trace instance.
On close, the check is:
if (!iter->snapshot && tr->stop_count)
That is, if it is not the snapshot buffer and it was stopped, it will
re-enable tracing.
Now there's more places that stop tracing. This means, if something else
stops tracing the tr->stop_count will be non-zero, and that means if the
trace file is closed, it will decrement the stop_count even though it
never incremented it. This causes a warning because when the user that
stopped tracing enables it again, the stop_count goes below zero.
Instead of relying on the stop_count being set to know if the close of
the trace file should enable tracing again, add a new flag to the trace
iterator. The trace iterator is unique per open of the trace file, and if
the open stops tracing set the trace iterator PAUSE flag. On close, if the
PAUSE flag is set, then re-enable it again.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251202161751.24abaaf1@gandalf.local.home
Fixes:
|
||
Madhur Kumar
|
979e2ec58d |
drm: nouveau: Replace sprintf() with sysfs_emit()
Replace sprintf() calls with sysfs_emit() to follow current kernel
coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251205091804.317801-1-madhurkumar004@gmail.com
Fixes:
|
||
René Rebe
|
d84e47edf1 |
drm/nouveau: fix circular dep oops from vendored i2c encoder
Since commit |
||
|
Madhur Kumar
|
2bdc2c0e12 |
drm/nouveau: refactor deprecated strcpy
strcpy() has been deprecated because it performs no bounds checking on the
destination buffer, which can lead to buffer overflows. Use the safer
strscpy() instead.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes:
|
||
|
Linus Torvalds
|
ac20755937 |
Summary
* Move jiffies converters out of kernel/sysctl.c Moved the jiffies converters into kernel/time/jiffies.c and replaced the pipe-max-size proc_handler converter with a macro based version. This is all part of the effort to relocate non-sysctl logic out of kernel/sysctl.c into more relevant subsystems. No functional changes. * Generalize proc handler converter creation Removed duplicated sysctl converter logic by consolidating it in macros. These are used inside sysctl core as well as in pipe.c and jiffies.c. Converter kernel and user space pointer args are now automatically const qualified for the convenience of the caller. No functional changes. * Miscellaneous Fixed kernel-doc format warnings, removed unnecessary __user qualifiers, and moved the nmi_watchdog sysctl into .rodata. * Testing This series was run through sysctl selftests/kunit test suite in x86_64. It went into linux-next after rc2, giving it a good 4/5 weeks of testing. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmktuJMACgkQupfNUreW QU9l8Qv+Noh/wLTqBEmHCrQ8k19YCNlBHO6a10Q5bFiAiGdTAMCZ7oFzoAwAjv5y pLtzS75G89zP0O6wgkxTsmoDNi4MRJenOCyjyEDFYvrK+qSTm0CWs0sZCsHqX4Dg 7M+7PVK/EbMO5509J2ae6cYS9pjfwg3EBQZ978b/FATkuhRjxOIJhIv3ZoaFjme4 0q/xqHw+oms5CUL035BfqtkoskIiRT19DAvM/DEjc2ByaHCTGURv00XLvSDHaRer O0Z8nXaxOOCscLunZbC3UL+hC7tB0nPE+XSzm9ylBEM7bTxeZmtvx2G6ru0+873U Sp+BwpFhe0RmzBFlclkd7UPtvGlFAY2QgAfpSaiLsodkoX0mctquTgpy99LhxKej EEyjl9tPVrYoH4MG562bZPGrQHtV4vnR9DXYx56vYtY2Fyr1GZmWawQoMZsHe9AU cVw5HrfeKeHBhk9hi3ZvT9z96ns3YBmIHnYNDeMy+mF/i+cVu///GwgGuFqUqKag 3eWcTaPh =DXVD -----END PGP SIGNATURE----- Merge tag 'sysctl-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl updates from Joel Granados: - Move jiffies converters out of kernel/sysctl.c Move the jiffies converters into kernel/time/jiffies.c and replace the pipe-max-size proc_handler converter with a macro based version. This is all part of the effort to relocate non-sysctl logic out of kernel/sysctl.c into more relevant subsystems. No functional changes. - Generalize proc handler converter creation Remove duplicated sysctl converter logic by consolidating it in macros. These are used inside sysctl core as well as in pipe.c and jiffies.c. Converter kernel and user space pointer args are now automatically const qualified for the convenience of the caller. No functional changes. - Miscellaneous Fix kernel-doc format warnings, remove unnecessary __user qualifiers, and move the nmi_watchdog sysctl into .rodata. - Testing This series was run through sysctl selftests/kunit test suite in x86_64. It went into linux-next after rc2, giving it a good 4/5 weeks of testing. * tag 'sysctl-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (21 commits) sysctl: Wrap do_proc_douintvec with the public function proc_douintvec_conv sysctl: Create pipe-max-size converter using sysctl UINT macros sysctl: Move proc_doulongvec_ms_jiffies_minmax to kernel/time/jiffies.c sysctl: Move jiffies converters to kernel/time/jiffies.c sysctl: Move UINT converter macros to sysctl header sysctl: Move INT converter macros to sysctl header sysctl: Allow custom converters from outside sysctl sysctl: remove __user qualifier from stack_erasing_sysctl buffer argument sysctl: Create macro for user-to-kernel uint converter sysctl: Add optional range checking to SYSCTL_UINT_CONV_CUSTOM sysctl: Create unsigned int converter using new macro sysctl: Add optional range checking to SYSCTL_INT_CONV_CUSTOM sysctl: Create integer converters with one macro sysctl: Create converter functions with two new macros sysctl: Discriminate between kernel and user converter params sysctl: Indicate the direction of operation with macro names sysctl: Remove superfluous __do_proc_* indirection sysctl: Remove superfluous tbl_data param from "dovec" functions sysctl: Replace void pointer with const pointer to ctl_table sysctl: fix kernel-doc format warning ... |
||
|
Linus Torvalds
|
d1d36025a6 |
Probes for v6.19
- fprobe: Performance enhancement of the fprobe using rhltable
. fprobe: use rhltable for fprobe_ip_table. The fprobe IP table has
been converted to use an rhltable for improved performance when
dealing with a large number of probed functions.
. Fix a suspicious RCU usage warning of the above change in the
fprobe entry handler.
. Remove an unused local variable of the above change.
. Fix to initialize fprobe_ip_table in core_initcall().
- fprobe: Performance optimization of fprobe by ftrace
. fprobe: Use ftrace instead of fgraph for entry only probes. This
avoids the unneeded overhead of fgraph stack setup.
. Also update fprobe selftest for entry-only probe.
. fprobe: Use ftrace only if CONFIG_DYNAMIC_FTRACE_WITH_ARGS or
WITH_REGS is defined.
- probes: Cleanup probe event subsystems.
. uprobe/eprobe: Allocate traceprobe_parse_context per probe instead
of each probe argument parsing. This reduce memory allocation/free
of temporary working memory.
. uprobes: Cleanup code using __free().
. eprobes: Cleanup code using __free().
. probes: Cleanup code using __free(trace_probe_log_clear) to clear
error log automatically.
. probes: Replace strcpy() with memcpy() in __trace_probe_log_err().
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmkvhSsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bWhEH/23XM5Msjy5vopB+ECZb
iCj8SkWrQzfiCBILUqxCkZdfJHFomGPHewxvxIOWdb7evtHuy0Ypne/Uw/TMAtAh
xvDQmu03IV2jO7h7GExsnEh0nX0upYg4IVmN0sCSSWSfgLLTWO9ICClavV9adcva
ZR+5TdZbK+W59n+ejxA9OMDt1G+nz1Ls9Qhx9ktf7odkJzBkQGPq/heZuPbF3+6k
Vj2IHTuqWobDDt+ekKOBRWNh9cS61ybxvsr/vmkT6s904ortP6mZa3zEYPRVOUNG
WJ/KGJwvExTcaG/Dy2g6q8tam1Bidx9/S6klyOGXQXxvaIT1VtBc66HzAUfso6jg
yIc=
=w6Kq
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"fprobe performance enhancement using rhltable:
- use rhltable for fprobe_ip_table. The fprobe IP table has been
converted to use an rhltable for improved performance when dealing
with a large number of probed functions
- Fix a suspicious RCU usage warning of the above change in the
fprobe entry handler
- Remove an unused local variable of the above change
- Fix to initialize fprobe_ip_table in core_initcall()
Performance optimization of fprobe by ftrace:
- Use ftrace instead of fgraph for entry only probes. This avoids the
unneeded overhead of fgraph stack setup
- Also update fprobe selftest for entry-only probe
- fprobe: Use ftrace only if CONFIG_DYNAMIC_FTRACE_WITH_ARGS or
WITH_REGS is defined
Cleanup probe event subsystems:
- Allocate traceprobe_parse_context per probe instead of each probe
argument parsing. This reduce memory allocation/free of temporary
working memory
- Cleanup code using __free()
- Replace strcpy() with memcpy() in __trace_probe_log_err()"
* tag 'probes-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: use ftrace if CONFIG_DYNAMIC_FTRACE_WITH_ARGS
lib/test_fprobe: add testcase for mixed fprobe
tracing: fprobe: optimization for entry only case
tracing: fprobe: Fix to init fprobe_ip_table earlier
tracing: fprobe: Remove unused local variable
tracing: probes: Replace strcpy() with memcpy() in __trace_probe_log_err()
tracing: fprobe: fix suspicious rcu usage in fprobe_entry
tracing: uprobe: eprobes: Allocate traceprobe_parse_context per probe
tracing: uprobes: Cleanup __trace_uprobe_create() with __free()
tracing: eprobe: Cleanup eprobe event using __free()
tracing: probes: Use __free() for trace_probe_log
tracing: fprobe: use rhltable for fprobe_ip_table
|
||
|
Linus Torvalds
|
2e8c1c6a50 |
ktest: Fix for v6.19:
- Fix incorrect variable in error message in config-bisect.pl If the old config file fails to get copied as the last good or bad config file, then it fails the program and prints an error message. But the variable used to print what the old config's name was incorrect. It was $config when it should have been $output_config. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaTL5PxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWBAQDtZ+UNtbeNR2eHzbcQ1+ENi0aWGwF9 e93hKyvAWkMgWAEAklDIdstyCaSQQgq3X4ilv1kaG1eu+KSWNnyhmqnyqAM= =KPW2 -----END PGP SIGNATURE----- Merge tag 'ktest-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest fix from Steven Rostedt: - Fix incorrect variable in error message in config-bisect.pl If the old config file fails to get copied as the last good or bad config file, then it fails the program and prints an error message. But the variable used to print what the old config's name was incorrect. It was $config when it should have been $output_config. * tag 'ktest-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix uninitialized var in config-bisect.pl |
||
|
Linus Torvalds
|
2ba59045fb |
- Add helper functions for allocations
The allocation of the per CPU buffer descriptor, the buffer page descriptors and the buffer page data itself can be pretty ugly. Add some helper macros and a function to have the code that allocates buffer pages and such look a little cleaner. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaTL3JxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qvDgAP9HFxPe2EqGspnY0RungWDs3yCxqlUp Eqz7SaI9GCXdXgD/TKiz3YjNVxZveeDU6QHWsDl4svoBzjSAsaeTkXD+OQ8= =siR0 -----END PGP SIGNATURE----- Merge tag 'trace-ringbuffer-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace ring-buffer cleanup from Steven Rostedt: - Add helper functions for allocations The allocation of the per CPU buffer descriptor, the buffer page descriptors and the buffer page data itself can be pretty ugly. Add some helper macros and a function to have the code that allocates buffer pages and such look a little cleaner. * tag 'trace-ringbuffer-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Add helper functions for allocations |
||
Arnaldo Carvalho de Melo
|
2eeb09fe1c |
libperf: Use 'extern' in LIBPERF_API visibility macro
Use 'extern' on LIBPERF_API to address this issue that started appearing
with gcc 15, first seen in ubuntu 25.10:
evlist.c: In function 'perf_evlist__purge':
evlist.c:202:17: error: implicit declaration of function 'perf_evsel__delete'; did you mean 'perf_evsel__exit'? [-Wimplicit-function-declaration]
202 | perf_evsel__delete(pos);
| ^~~~~~~~~~~~~~~~~~
| perf_evsel__exit
evlist.c:202:17: error: nested extern declaration of 'perf_evsel__delete' [-Werror=nested-externs]
evlist.c: In function 'perf_evlist__open':
evlist.c:261:23: error: implicit declaration of function 'perf_evsel__open'; did you mean 'perf_evsel__exit'? [-Wimplicit-function-declaration]
261 | err = perf_evsel__open(evsel, evsel->cpus, evsel->threads);
| ^~~~~~~~~~~~~~~~
| perf_evsel__exit
evlist.c:261:23: error: nested extern declaration of 'perf_evsel__open' [-Werror=nested-externs]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Linus Torvalds
|
0b1b4a3d8e |
Runtime verifier updates for v6.19:
- Adapt the ftracetest script to be run from a different folder This uses the already existing OPT_TEST_DIR but extends it further to run independent tests, then add an --rv flag to allow using the script for testing RV (mostly) independently on ftrace. - Add basic RV selftests in selftests/verification for more validations Add more validations for available/enabled monitors and reactors. This could have caught the bug introducing kernel panic solved above. Tests use ftracetest. - Convert react() function in reactor to use va_list directly Use a central helper to handle the variadic arguments. Clean up macros and mark functions as static. - Add lockdep annotations to reactors to have lockdep complain of errors If the reactors are called from improper context. Useful to develop new reactors. This highlights a warning in the panic reactor that is related to the printk subsystem and not to RV. - Convert core RV code to use lock guards and __free helpers This completely removes goto statements. - Fix compilation if !CONFIG_RV_REACTORS Fix the warning by keeping LTL monitor variable as always static. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaTBoVxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWpAQDxPQAJQvBZ41l9q9Cis7PqGGezT4Nv g6Fh/ydMOlJCsQD/R0Xd5JxPmBI8FLCwCfqHo7wYKUhP8GfL/ORPEWhU2gI= =EEot -----END PGP SIGNATURE----- Merge tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull runtime verifier updates from Steven Rostedt: - Adapt the ftracetest script to be run from a different folder This uses the already existing OPT_TEST_DIR but extends it further to run independent tests, then add an --rv flag to allow using the script for testing RV (mostly) independently on ftrace. - Add basic RV selftests in selftests/verification for more validations Add more validations for available/enabled monitors and reactors. This could have caught the bug introducing kernel panic solved above. Tests use ftracetest. - Convert react() function in reactor to use va_list directly Use a central helper to handle the variadic arguments. Clean up macros and mark functions as static. - Add lockdep annotations to reactors to have lockdep complain of errors If the reactors are called from improper context. Useful to develop new reactors. This highlights a warning in the panic reactor that is related to the printk subsystem and not to RV. - Convert core RV code to use lock guards and __free helpers This completely removes goto statements. - Fix compilation if !CONFIG_RV_REACTORS Fix the warning by keeping LTL monitor variable as always static. * tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rv: Fix compilation if !CONFIG_RV_REACTORS rv: Convert to use __free rv: Convert to use lock guard rv: Add explicit lockdep context for reactors rv: Make rv_reacting_on() static rv: Pass va_list to reactors selftests/verification: Add initial RV tests selftest/ftrace: Generalise ftracetest to use with RV |
||
|
Linus Torvalds
|
0771cee974 |
ftrace fixes for v6.19:
- Fix regression of pid filtering of function graph tracer When the function graph tracer allowed multiple instances of graph tracing using subops, the filtering by pid broke. The ftrace_ops->private that was used for pid filtering wasn't updated on creation. The wrong function entry callback was used when pid filtering was enabled when the function graph tracer started, which meant that the pid filtering wasn't happening. - Remove no longer needed ftrace_trace_task() With PID filtering working via ftrace_pids_enabled() and fgraph_pid_func(), the coarse-grained ftrace_trace_task() check in graph_entry() is obsolete. It was only a fallback for uninitialized op->private (now fixed), and its removal ensures consistent PID filtering with standard function tracing. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaS90FhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qrqMAQDbU53VhvZ6rE0pNvu0Tlk+LDCu3gxg F2wisWr65389OgD/VFLTVRjCZh1iY7FFWjAPGRCMbetljmMgK5vpH6XSigA= =VKaD -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Fix regression of pid filtering of function graph tracer When the function graph tracer allowed multiple instances of graph tracing using subops, the filtering by pid broke. The ftrace_ops->private that was used for pid filtering wasn't updated on creation. The wrong function entry callback was used when pid filtering was enabled when the function graph tracer started, which meant that the pid filtering wasn't happening. - Remove no longer needed ftrace_trace_task() With PID filtering working via ftrace_pids_enabled() and fgraph_pid_func(), the coarse-grained ftrace_trace_task() check in graph_entry() is obsolete. It was only a fallback for uninitialized op->private (now fixed), and its removal ensures consistent PID filtering with standard function tracing. * tag 'ftrace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fgraph: Remove coarse PID filtering from graph_entry() fgraph: Check ftrace_pids_enabled on registration for early filtering fgraph: Initialize ftrace_ops->private for function graph ops |
||
|
Linus Torvalds
|
69c5079b49 |
tracing updates for v6.19:
- Merge branch shared with kprobes on extending trace options
The trace options were defined by a 32 bit variable. This limits the
tracing instances to have a total of 32 different options. As that limit
has been hit, and more options are being added, increase the option mask
to a 64 bit number, doubling the number of options available.
As this is required for the kprobe topic branches as well as the tracing
topic branch, a separate branch was created and merged into both.
- Make trace_user_fault_read() available for the rest of tracing
The function trace_user_fault_read() is used by trace_marker file read to
allow reading user space to be done fast and without locking or
allocations. Make this available so that the system call trace events can
use it too.
- Have system call trace events read user space values
Now that the system call trace events callbacks are called in a faultable
context, take advantage of this and read the user space buffers for
various system calls. For example, show the path name of the openat system
call instead of just showing the pointer to that path name in user space.
Also show the contents of the buffer of the write system call. Several
system call trace events are updated to make tracing into a light weight
strace tool for all applications in the system.
- Update perf system call tracing to do the same
- And a config and syscall_user_buf_size file to control the size of the buffer
Limit the amount of data that can be read from user space. The default
size is 63 bytes but that can be expanded to 165 bytes.
- Allow the persistent ring buffer to print system calls normally
The persistent ring buffer prints trace events by their type and ignores
the print_fmt. This is because the print_fmt may change from kernel to
kernel. As the system call output is fixed by the system call ABI itself,
there's no reason to limit that. This makes reading the system call events
in the persistent ring buffer much nicer and easier to understand.
- Add options to show text offset to function profiler
The function profiler that counts the number of times a function is hit
currently lists all functions by its name and offset. But this becomes
ambiguous when there are several functions with the same name. Add a
tracing option that changes the output to be that of _text+offset
instead. Now a user space tool can use this information to map the
_text+offset to the unique function it is counting.
- Report bad dynamic event command
If a bad command is passed to the dynamic_events file, report it properly
in the error log.
- Clean up tracer options
Clean up the tracer option code a bit, by removing some useless code and
also using switch statements instead of a series of if statements.
- Have tracing options be instance specific
Tracers can have their own options (function tracer, irqsoff tracer,
function graph tracer, etc). But now that the same tracer can be enabled
in multiple trace instances, their options are still global. The API is
per instance, thus changing one affects other instances. This isn't even
consistent, as the option take affect differently depending on when an
tracer started in an instance. Make the options for instances only affect
the instance it is changed under.
- Optimize pid_list lock contention
Whenever the pid_list is read, it uses a spin lock. This happens at every
sched switch. Taking the lock at sched switch can be removed by instead
using a seqlock counter.
- Clean up the trace trigger structures
The trigger code uses two different structures to implement a single
tigger. This was due to trying to reuse code for the two different types
of triggers (always on trigger, and count limited trigger). But by adding
a single field to one structure, the other structure could be absorbed
into the first structure making he code easier to understand.
- Create a bulk garbage collector for trace triggers
If user space has triggers for several hundreds of events and then removes
them, it can take several seconds to complete. This is because each
removal calls the slow tracepoint_synchronize_unregister() that can take
hundreds of milliseconds to complete. Instead, create a helper thread that
will do the clean up. When a trigger is removed, it will create the
kthread if it isn't already created, and then add the trigger to a llist.
The kthread will take the items off the llist, call
tracepoint_synchronize_unregister(), and then remove the items it took
off. It will then check if there's more items to free before sleeping.
This makes user space removing all these triggers to finish in less than a
second.
- Allow function tracing of some of the tracing infrastructure code
Because the tracing code can cause recursion issues if it is traced by the
function tracer the entire tracing directory disables function tracing.
But not all of tracing causes issues if it is traced. Namely, the event
tracing code. Add a config that enables some of the tracing code to be
traced to help in debugging it. Note, when this is enabled, it does add
noise to general function tracing, especially if events are enabled as
well (which is a common case).
- Add boot-time backup instance for persistent buffer
The persistent ring buffer is used mostly for kernel crash analysis in the
field. One issue is that if there's a crash, the data in the persistent
ring buffer must be read before tracing can begin using it. This slows
down the boot process. Once tracing starts in the persistent ring buffer,
the old data must be freed and the addresses no longer match and old
events can't be in the buffer with new events.
Create a way to create a backup buffer that copies the persistent ring
buffer at boot up. Then after a crash, the always on tracer can begin
immediately as well as the normal boot process while the crash analysis
tooling uses the backup buffer. After the backup buffer is finished being
read, it can be removed.
- Enable function graph args and return address options at the same time
Currently the when reading of arguments in the function graph tracer is
enabled, the option to record the parent function in the entry event can
not be enabled. Update the code so that it can.
- Add new struct_offset() helper macro
Add a new macro that takes a pointer to a structure and a name of one of
its members and it will return the offset of that member. This allows the
ring buffer code to simplify the following:
From: size = struct_size(entry, buf, cnt - sizeof(entry->id));
To: size = struct_offset(entry, id) + cnt;
There should be other simplifications that this macro can help out with as
well.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaS9xqxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj6tAQD4MR1lsE3XpH09asO4CDDfhbtRSQVD
o8bVKVihWx/j5gD/XezjqE2Q2+DO6dhnsQY6pbtNdXoKgaMuQJGA+dvPsQc=
=HilC
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Extend tracing option mask to 64 bits
The trace options were defined by a 32 bit variable. This limits the
tracing instances to have a total of 32 different options. As that
limit has been hit, and more options are being added, increase the
option mask to a 64 bit number, doubling the number of options
available.
As this is required for the kprobe topic branches as well as the
tracing topic branch, a separate branch was created and merged into
both.
- Make trace_user_fault_read() available for the rest of tracing
The function trace_user_fault_read() is used by trace_marker file
read to allow reading user space to be done fast and without locking
or allocations. Make this available so that the system call trace
events can use it too.
- Have system call trace events read user space values
Now that the system call trace events callbacks are called in a
faultable context, take advantage of this and read the user space
buffers for various system calls. For example, show the path name of
the openat system call instead of just showing the pointer to that
path name in user space. Also show the contents of the buffer of the
write system call. Several system call trace events are updated to
make tracing into a light weight strace tool for all applications in
the system.
- Update perf system call tracing to do the same
- And a config and syscall_user_buf_size file to control the size of
the buffer
Limit the amount of data that can be read from user space. The
default size is 63 bytes but that can be expanded to 165 bytes.
- Allow the persistent ring buffer to print system calls normally
The persistent ring buffer prints trace events by their type and
ignores the print_fmt. This is because the print_fmt may change from
kernel to kernel. As the system call output is fixed by the system
call ABI itself, there's no reason to limit that. This makes reading
the system call events in the persistent ring buffer much nicer and
easier to understand.
- Add options to show text offset to function profiler
The function profiler that counts the number of times a function is
hit currently lists all functions by its name and offset. But this
becomes ambiguous when there are several functions with the same
name.
Add a tracing option that changes the output to be that of
'_text+offset' instead. Now a user space tool can use this
information to map the '_text+offset' to the unique function it is
counting.
- Report bad dynamic event command
If a bad command is passed to the dynamic_events file, report it
properly in the error log.
- Clean up tracer options
Clean up the tracer option code a bit, by removing some useless code
and also using switch statements instead of a series of if
statements.
- Have tracing options be instance specific
Tracers can have their own options (function tracer, irqsoff tracer,
function graph tracer, etc). But now that the same tracer can be
enabled in multiple trace instances, their options are still global.
The API is per instance, thus changing one affects other instances.
This isn't even consistent, as the option take affect differently
depending on when an tracer started in an instance. Make the options
for instances only affect the instance it is changed under.
- Optimize pid_list lock contention
Whenever the pid_list is read, it uses a spin lock. This happens at
every sched switch. Taking the lock at sched switch can be removed by
instead using a seqlock counter.
- Clean up the trace trigger structures
The trigger code uses two different structures to implement a single
tigger. This was due to trying to reuse code for the two different
types of triggers (always on trigger, and count limited trigger). But
by adding a single field to one structure, the other structure could
be absorbed into the first structure making he code easier to
understand.
- Create a bulk garbage collector for trace triggers
If user space has triggers for several hundreds of events and then
removes them, it can take several seconds to complete. This is
because each removal calls tracepoint_synchronize_unregister() that
can take hundreds of milliseconds to complete.
Instead, create a helper thread that will do the clean up. When a
trigger is removed, it will create the kthread if it isn't already
created, and then add the trigger to a llist. The kthread will take
the items off the llist, call tracepoint_synchronize_unregister(),
and then remove the items it took off. It will then check if there's
more items to free before sleeping.
This makes user space removing all these triggers to finish in less
than a second.
- Allow function tracing of some of the tracing infrastructure code
Because the tracing code can cause recursion issues if it is traced
by the function tracer the entire tracing directory disables function
tracing. But not all of tracing causes issues if it is traced.
Namely, the event tracing code. Add a config that enables some of the
tracing code to be traced to help in debugging it. Note, when this is
enabled, it does add noise to general function tracing, especially if
events are enabled as well (which is a common case).
- Add boot-time backup instance for persistent buffer
The persistent ring buffer is used mostly for kernel crash analysis
in the field. One issue is that if there's a crash, the data in the
persistent ring buffer must be read before tracing can begin using
it. This slows down the boot process. Once tracing starts in the
persistent ring buffer, the old data must be freed and the addresses
no longer match and old events can't be in the buffer with new
events.
Create a way to create a backup buffer that copies the persistent
ring buffer at boot up. Then after a crash, the always on tracer can
begin immediately as well as the normal boot process while the crash
analysis tooling uses the backup buffer. After the backup buffer is
finished being read, it can be removed.
- Enable function graph args and return address options at the same
time
Currently the when reading of arguments in the function graph tracer
is enabled, the option to record the parent function in the entry
event can not be enabled. Update the code so that it can.
- Add new struct_offset() helper macro
Add a new macro that takes a pointer to a structure and a name of one
of its members and it will return the offset of that member. This
allows the ring buffer code to simplify the following:
From: size = struct_size(entry, buf, cnt - sizeof(entry->id));
To: size = struct_offset(entry, id) + cnt;
There should be other simplifications that this macro can help out
with as well
* tag 'trace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (42 commits)
overflow: Introduce struct_offset() to get offset of member
function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously
tracing: Add boot-time backup of persistent ring buffer
ftrace: Allow tracing of some of the tracing code
tracing: Use strim() in trigger_process_regex() instead of skip_spaces()
tracing: Add bulk garbage collection of freeing event_trigger_data
tracing: Remove unneeded event_mutex lock in event_trigger_regex_release()
tracing: Merge struct event_trigger_ops into struct event_command
tracing: Remove get_trigger_ops() and add count_func() from trigger ops
tracing: Show the tracer options in boot-time created instance
ftrace: Avoid redundant initialization in register_ftrace_direct
tracing: Remove unused variable in tracing_trace_options_show()
fgraph: Make fgraph_no_sleep_time signed
tracing: Convert function graph set_flags() to use a switch() statement
tracing: Have function graph tracer option sleep-time be per instance
tracing: Move graph-time out of function graph options
tracing: Have function graph tracer option funcgraph-irqs be per instance
trace/pid_list: optimize pid_list->lock contention
tracing: Have function graph tracer define options per instance
tracing: Have function tracer define options per instance
...
|
||
|
Linus Torvalds
|
36492b7141 |
Detect unused tracepoints for v6.19:
If a tracepoint is defined but never used (TRACE_EVENT() created but no
trace_<tracepoint>() called), it can take up to or more than 5K of memory
each. This can add up as there are around a hundred unused tracepoints with
various configs. That is 500K of wasted memory.
Add a make build parameter of "UT=1" to have the build warn if an unused
tracepoint is detected in the build. This allows detection of unused
tracepoints to be upstream so that outreachy and the mentoring project can
have new developers look for fixing them, without having these warnings
suddenly show up when someone upgrades their kernel. When all known unused
tracepoints are removed, then the "UT=1" build parameter can be removed and
unused tracepoints will always warn. This will catch new unused tracepoints
after the current ones have been removed.
- Separate out elf functions from sorttable.c
Move out the ELF parsing functions from sorttable.c so that the tracing
tooling can use it.
- Add a tracepoint verifier tool to the build process
If "UT=1" is added to the kernel command line, any unused tracepoints will
trigger a warning at build time.
- Do not warn about unused tracepoints for tracepoints that are exported
There are sever cases where a tracepoint is created by the kernel and used
by modules. Since there's no easy way to detect if these are truly unused
since the users are in modules, if a tracepoint is exported, assume it
will eventually be used by a module. Note, there's not many exported
tracepoints so this should not be a problem to ignore them.
- Have building of modules also detect unused tracepoints
Do not only check the main vmlinux for unused tracepoints, also check
modules. If a module is defining a tracepoint it should be using it.
- Add the tracepoint-update program to the ignore file
The new tracepoint-update program needs to be ignored by git.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaS9iLxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qk4mAP96T/IPPjox1Fd7r/Dpm+JNfYom8AZ8
WGNL06+aEKRWZwEAqc+u/9k3r964k+pKQ7qwL3ZslG2ALSOdKbFXHpsPpw8=
=R/qK
-----END PGP SIGNATURE-----
Merge tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull unused tracepoints update from Steven Rostedt:
"Detect unused tracepoints.
If a tracepoint is defined but never used (TRACE_EVENT() created but
no trace_<tracepoint>() called), it can take up to or more than 5K of
memory each. This can add up as there are around a hundred unused
tracepoints with various configs. That is 500K of wasted memory.
Add a make build parameter of "UT=1" to have the build warn if an
unused tracepoint is detected in the build. This allows detection of
unused tracepoints to be upstream so that outreachy and the mentoring
project can have new developers look for fixing them, without having
these warnings suddenly show up when someone upgrades their kernel.
When all known unused tracepoints are removed, then the "UT=1" build
parameter can be removed and unused tracepoints will always warn. This
will catch new unused tracepoints after the current ones have been
removed.
Summary:
- Separate out elf functions from sorttable.c
Move out the ELF parsing functions from sorttable.c so that the
tracing tooling can use it.
- Add a tracepoint verifier tool to the build process
If "UT=1" is added to the kernel command line, any unused
tracepoints will trigger a warning at build time.
- Do not warn about unused tracepoints for tracepoints that are
exported
There are sever cases where a tracepoint is created by the kernel
and used by modules. Since there's no easy way to detect if these
are truly unused since the users are in modules, if a tracepoint is
exported, assume it will eventually be used by a module. Note,
there's not many exported tracepoints so this should not be a
problem to ignore them.
- Have building of modules also detect unused tracepoints
Do not only check the main vmlinux for unused tracepoints, also
check modules. If a module is defining a tracepoint it should be
using it.
- Add the tracepoint-update program to the ignore file
The new tracepoint-update program needs to be ignored by git"
* tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts: add tracepoint-update to the list of ignores files
tracing: Add warnings for unused tracepoints for modules
tracing: Allow tracepoint-update.c to work with modules
tracepoint: Do not warn for unused event that is exported
tracing: Add a tracepoint verification check at build time
sorttable: Move ELF parsing into scripts/elf-parse.[ch]
|
||
|
Linus Torvalds
|
5779de8d36 |
rtla updaets for v6.19:
- Officially add Tomas Glozar as a maintainer to RTLA tool
- Add for_each_monitored_cpu() helper
In multiple places, RTLA tools iterate over the list of CPUs running
tracer threads.
Use single helper instead of repeating the for/if combination.
- Remove unused variable option_index in argument parsing
RTLA tools use getopt_long() for argument parsing. For its last
argument, an unused variable "option_index" is passed.
Remove the variable and pass NULL to getopt_long() to shorten
the naturally long parsing functions, and make them more readable.
- Fix unassigned nr_cpus after code consolidation
In recent code consolidation, timerlat tool cleanup, previously
implemented separately for each tool, was moved to a common function
timerlat_free().
The cleanup relies on nr_cpus being set. This was not done in the new
function, leaving the variable uninitialized.
Initialize the variable properly, and remove silencing of compiler
warning for uninitialized variables.
- Stop tracing on user latency in BPF mode
Despite the name, rtla-timerlat's -T/--thread option sets timerlat's
stop_tracing_total_us option, which also stops tracing on
return-from-user latency, not only on thread latency.
Implement the same behavior also in BPF sample collection stop tracing
handler to avoid a discrepancy and restore correspondence of behavior
with the equivalent option of cyclictest.
- Fix threshold actions always triggering
A bug in threshold action logic caused the action to execute even
if tracing did not stop because of threshold.
Fix the logic to stop correctly.
- Fix few minor issues in tests
Extend tests that were shown to need it to 5s, fix osnoise test
calling timerlat by mistake, and use new, more reliable output
checking in timerlat's "top stop at failed action" test.
- Do not print usage on argument parsing error
RTLA prints the entire usage message on encountering errors in
argument parsing, like a malformed CPU list.
The usage message has gotten too long. Instead of printing it,
use newly added fatal() helper function to simply exit with
the error message, excluding the usage.
- Fix unintuitive -C/--cgroup interface
"-C cgroup" and "--cgroup cgroup" are invalid syntax, despite that
being a common way to specify an option with argument. Moreover,
using them fails silently and no cgroup is set.
Create new helper function to unify the handling of all such options
and allow all of:
-Xsomething
-X=something
-X something
as well as the equivalent for the long option.
- Fix -a overriding -t argument filename
Fix a bug where -a following -t custom_file.txt overrides the custom
filename with the default timerlat_trace.txt.
- Stop tracing correctly on multiple events at once
In some race scenarios, RTLA BPF sample collection might send multiple
stop tracing events via the BPF ringbuffer at once.
Compare the number of events for != 0 instead of == 1 to cover for
this scenario and stop tracing properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaS9bxBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhrgAP0a/AtsL9+IFXAK5JK8aO1XWApVyK9n
48FRZWu/jrupuAD7BO+EHazmPEourNaUqYPeuymwxT+4O47RH1Q/aasLQwo=
=RvNH
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla trace tooling updates from Steven Rostedt:
- Officially add Tomas Glozar as a maintainer to RTLA tool
- Add for_each_monitored_cpu() helper
In multiple places, RTLA tools iterate over the list of CPUs running
tracer threads.
Use single helper instead of repeating the for/if combination.
- Remove unused variable option_index in argument parsing
RTLA tools use getopt_long() for argument parsing. For its last
argument, an unused variable "option_index" is passed.
Remove the variable and pass NULL to getopt_long() to shorten the
naturally long parsing functions, and make them more readable.
- Fix unassigned nr_cpus after code consolidation
In recent code consolidation, timerlat tool cleanup, previously
implemented separately for each tool, was moved to a common function
timerlat_free().
The cleanup relies on nr_cpus being set. This was not done in the new
function, leaving the variable uninitialized.
Initialize the variable properly, and remove silencing of compiler
warning for uninitialized variables.
- Stop tracing on user latency in BPF mode
Despite the name, rtla-timerlat's -T/--thread option sets timerlat's
stop_tracing_total_us option, which also stops tracing on
return-from-user latency, not only on thread latency.
Implement the same behavior also in BPF sample collection stop
tracing handler to avoid a discrepancy and restore correspondence of
behavior with the equivalent option of cyclictest.
- Fix threshold actions always triggering
A bug in threshold action logic caused the action to execute even if
tracing did not stop because of threshold.
Fix the logic to stop correctly.
- Fix few minor issues in tests
Extend tests that were shown to need it to 5s, fix osnoise test
calling timerlat by mistake, and use new, more reliable output
checking in timerlat's "top stop at failed action" test.
- Do not print usage on argument parsing error
RTLA prints the entire usage message on encountering errors in
argument parsing, like a malformed CPU list.
The usage message has gotten too long. Instead of printing it, use
newly added fatal() helper function to simply exit with the error
message, excluding the usage.
- Fix unintuitive -C/--cgroup interface
"-C cgroup" and "--cgroup cgroup" are invalid syntax, despite that
being a common way to specify an option with argument. Moreover,
using them fails silently and no cgroup is set.
Create new helper function to unify the handling of all such options
and allow all of:
-Xsomething
-X=something
-X something
as well as the equivalent for the long option.
- Fix -a overriding -t argument filename
Fix a bug where -a following -t custom_file.txt overrides the custom
filename with the default timerlat_trace.txt.
- Stop tracing correctly on multiple events at once
In some race scenarios, RTLA BPF sample collection might send
multiple stop tracing events via the BPF ringbuffer at once.
Compare the number of events for != 0 instead of == 1 to cover for
this scenario and stop tracing properly.
* tag 'trace-tools-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Exit top main loop on any non-zero wait_retval
rtla/tests: Don't rely on matching ^1ALL
rtla: Fix -a overriding -t argument
rtla: Fix -C/--cgroup interface
tools/rtla: Replace osnoise_hist_usage("...") with fatal("...")
tools/rtla: Replace osnoise_top_usage("...") with fatal("...")
tools/rtla: Replace timerlat_hist_usage("...") with fatal("...")
tools/rtla: Replace timerlat_top_usage("...") with fatal("...")
tools/rtla: Add fatal() and replace error handling pattern
rtla/tests: Fix osnoise test calling timerlat
rtla/tests: Extend action tests to 5s
tools/rtla: Fix --on-threshold always triggering
rtla/timerlat_bpf: Stop tracing on user latency
tools/rtla: Fix unassigned nr_cpus
tools/rtla: Remove unused optional option_index
tools/rtla: Add for_each_monitored_cpu() helper
MAINTAINERS: Add Tomas Glozar as a maintainer to RTLA tool
|
||
Jens Axboe
|
55d57b3bcc |
io_uring/poll: unify poll waitqueue entry and list removal
For some cases, the order in which the waitq entry list and head writing happens is important, for others it doesn't really matter. But it's somewhat confusing to have them spread out over the file. Abstract out the nicely documented code in io_pollfree_wake() and move it into a helper, and use that helper consistently rather than having other call sites manually do the same thing. While at it, correct a comment function name as well. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
ed1b409137 |
hardening updates for v6.19-rc1
- string: Add missing kernel-doc return descriptions (Kriish Sharma) - Update some mis-typed allocations - Enable GCC diagnostic context for value-tracking warnings -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaS9E5QAKCRA2KwveOeQk u5lYAQDEXFBD3+X+k9LNuPS/FLpz5sEI0SOI4lD8xDEjhtmygAD+LVV8yRf6ajPA 5O2f4hbKnP5+4XHwSiG+CV7QpAgHHwo= =6GEw -----END PGP SIGNATURE----- Merge tag 'hardening-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - string: Add missing kernel-doc return descriptions (Kriish Sharma) - Update some mis-typed allocations These correct some accidentally wrong types used in allocations (that didn't affect the resulting size) that never got picked up from the batch I sent a few months ago. - Enable GCC diagnostic context for value-tracking warnings This results in better GCC diagnostics for the value range tracking, so we can get better visibility into where those values are coming from when we get out-of-bounds warnings at compile time. * tag 'hardening-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Enable GCC diagnostic context for value-tracking warnings string: Add missing kernel-doc return descriptions media: iris: Cast iris_hfi_gen2_get_instance() allocation type drm/plane: Remove const qualifier from plane->modifiers allocation type comedi: Adjust range_table_list allocation type |
||
|
Linus Torvalds
|
3ee37abbbd |
pstore update for v6.19-rc1
- pstore/ram: Update module parameters from platform data (Tzung-Bi Shih) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaS9EPwAKCRA2KwveOeQk uyEDAQDZTrI547b000g8gjAWpQpQWB32wkNZOP4ANafAGQXLDwD9G8YxKQFRX+HJ mfkvgK8JqOiPjsnvbPJv/F2VdBaQHAk= =FDkt -----END PGP SIGNATURE----- Merge tag 'pstore-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore update from Kees Cook: - pstore/ram: Update module parameters from platform data (Tzung-Bi Shih) * tag 'pstore-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Update module parameters from platform data |
||
|
Linus Torvalds
|
5d45c729ed |
configfs changes for v6.19
-----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEEsH5R1a/fCoV1sAS4bgaPnkoY3cFAmku+SoWHGEuaGluZGJv cmdAa2VybmVsLm9yZwAKCRDhuBo+eShjd5XpEACgVpU27v59kWhw+vIPQeNfrCzo L8Is/w4a0IkBbaeLvp7JhjshQ9ViEuWFJE7un9RVxOm0YC9sisGZYAfNks71nFYE /AAwocY4MrCLcDHwtRm5N2eykz6DtpFKorl6Go2WEUN5ye5ulDO7cpMTG5knKKb2 CiaifWx/oRqsqQxdeA53c8fnlGKJ/R0KJXDwslj2G4tGnyz1YwbrpQdT3QNYjSWb hxyoet36Mprylrrfn9LBnGJuCwCXmAcxWAn/vtGwr7SDoL0o4XhcVfcnHblclDvr ZVcKWKpesLfqNjBeO0GsBMabPKn6wZvscvtPNh09x57MxfYLPLXnsD+rMmeMOd0P X3Wv7aJjvBWsgSOONVI2gRizNilYq8lnzE1BdPMenlxDk8DIh2blGeA2SzZmpvM/ 8tkpv7x/hYKXmcxGyaUPcYIqMCnXkbVHDGI05DJLCRttF21XIDPpQBuVpApMETzD nBAZO7sVatprmEi/+n4C8rCu7B5VuSSFW5Q/eO2QeVJmXIoPPG86b78sedIzIRHO rH9ox3HWgDTwi4GuBJmf7Qn8/lurS6QncVZCI91cXUnOhf1juACSRMVOOvCP9lio M7Dmd3U2QkkkE6h/TwM2o7wBBrzlCLRPL7TeF9ft8m29g+SU9jR8N0/fo2yJUA4F EZ9xxiwzNLkLTkqBtg== =TV16 -----END PGP SIGNATURE----- Merge tag 'configfs-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux Pull configfs updates from Andreas Hindborg: "Two commits changing constness of the configfs vtable pointers. We plan to follow up with changes at call sites down the road" * tag 'configfs-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux: configfs: Constify ct_item_ops in struct config_item_type configfs: Constify ct_group_ops in struct config_item_type |
||
Joanne Koong
|
a4c694bfc2 |
io_uring/kbuf: use WRITE_ONCE() for userspace-shared buffer ring fields
buf->addr and buf->len reside in memory shared with userspace. They should be written with WRITE_ONCE() to guarantee atomic stores and prevent tearing or other unsafe compiler optimizations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Cc: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Arnd Bergmann
|
79edb7f596 |
Samsung DTS ARM changes for v6.19
Fix WiFi on Exynos4210 and Exynos4412 boards with Broadcom chip after system suspend and resume, by using cap-power-off-card to power off the WiFi during suspend. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmkweLUQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD1xkgD/91VnOzyyRJlMH4Rqua0Bt2VvLdVwYTHCYV gomhFWq+rIPo1cUWXYySutffQIjBrB2e4GywqLxBEOxiOTPjveIj4CfXBFz5p3yE 2ZUeC1UhJiOyw0RJeo5U19DTWrWDEg2WOJNWlOY04rlK9CedI/q6qNZBwSY6k7fh Nh2OwEYemG4d3AjsjCDJ3s3c1sA5XU+i3FUz76BEn8IszwY1iASfrUWgGGxOrJoB Z6oswKmW+htXvxE+2j7Bzc/nibUkp/MUNWg6uDGEg0B10UKY+AlTJs7LP3KvZP+z EapwfEmCiEcNDNBudkwWpL05KW5PvPqAP/piGQQUvzFbTP5vmDxlJU/BzTrBHPhG 3x8d5Z/kVRBRTo7kM6FxJvRDMmEIeKc1Vlf86E9yaMG0vkajJpyWuwUgp2S/NSO/ 0hgAT3G0Vad4JNBvtQgI4gGiEhNrU2ZvFs2iyBUzqrKLtXPqmeGIzz/odjQOWtrn JKnal+EBDqyTHZZrS7GvyCGCFnBKLZS8mBDjQjSbyT8OCCqbKA85fm3jd4g8xw8q dC3oUKAUv9tmEPwagRDdQlAW9uNa4X35IUOo3/ZYab9RWvlqNuXbp3qk23vNLeEP HG8idkT5X1G8Twv7PTu7A5EXc2lcbG8UwvcnmJkhlzxK2Q7xaE+zVkwrFz+b4R8s otdBAdmD0w== =EMVY -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmky7PkACgkQmmx57+YA GNlqkw/+P4eDP120gOU/pySsETurAsuRD2So/dwzJ9Wj0sPb0SbTDdmY3tY64mnt xOtJghLEO/dgeR3pyq0fQCJ+xXzCQ2IzeNw1YbrfasIiNDWm+jk4cDWg5uFh4kS1 hBIBCtCUKSDUSVgHs5ba9YPQA3CPLVl8n0J+/IGvl2EdKymFb8T5RWl1HZZwlGGP UDzggXTchywbvXHL+Xl6JsFzq+U+/J0i7NB+HurEaqk41QCMOgm3rx3ix53K8tzb RCeRmnk6C+utnq1I3F5hdtt79MZ83zKc4OiD8jcDyUR5EAEZCrVonMGXPEi9Q3Be Hw0Tw8IdLv2MZXctNxOuGLhOaiTCXGaLFAB66mTLpBMdwMjrxWDs1o8fNkAsw0Mc rx/7hpid53DjXzb0XHuVo7ZZuiHIo86cp58Bgn6atULjbc/CQ688jvWCno3Rygha UkbDYa6YNkiga2bWnCdD1d4x1ug6G9TFeG5trtoouXITEXz4nIpMVuLbPaCx7355 J4RSNqomNOe5GOborzdskyTHefllmuZGWYunk2Xh6iToDPSvIIJXn0XHq4AB/d4K 2B2B8jj1s1ZBpyGDeN3HJO/h/C1m9+W3ptqyTR9vK8nxKZFDaiPLKCdnIUNjCIdB E20bsSaD3UdZhHiEGYIUjOCjjXUSCrrZxZ2H6NUZSpsXmWBUh7M= =zDwc -----END PGP SIGNATURE----- Merge tag 'samsung-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.19 Fix WiFi on Exynos4210 and Exynos4412 boards with Broadcom chip after system suspend and resume, by using cap-power-off-card to power off the WiFi during suspend. * tag 'samsung-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
68f9bbf4df |
Samsung SoC drivers for v6.19, part two
Two fixes for Exynos PMU (Power Management Unit) driver:
1. Silence lockdep warning being actually a false positive, but quite
disturbing during testing. Issue was introduced in v6.18.
2. Drop device refcount when requesting device regmap with
exynos_get_pmu_regmap_by_phandle(). Issue was introduced much
earlier (around v6.9), with code being rewritten in between.
-----BEGIN PGP SIGNATURE-----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=lz9b
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=34BB
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.19-2-late' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers-late
Samsung SoC drivers for v6.19, part two
Two fixes for Exynos PMU (Power Management Unit) driver:
1. Silence lockdep warning being actually a false positive, but quite
disturbing during testing. Issue was introduced in v6.18.
2. Drop device refcount when requesting device regmap with
exynos_get_pmu_regmap_by_phandle(). Issue was introduced much
earlier (around v6.9), with code being rewritten in between.
* tag 'samsung-drivers-6.19-2-late' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
HariKrishna Sagala
|
d740d52e34 |
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
Initialize 'status1' with a default value to resolve the static analysis smatch reported error "uninitialized symbol 'status1'". The 'status1' variable is used to create a buff using "kmemdup". So, ensure to initialize the value before it is read. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com> Link: https://patch.msgid.link/20251204052201.16286-3-hariconscious@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Junrui Luo
|
210d77cca3 |
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
The DSP event handling code in hwdep_read() could write more bytes to
the user buffer than requested, when a user provides a buffer smaller
than the event header size (8 bytes).
Fix by using min_t() to clamp the copy size, This ensures we never copy
more than the user requested.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes:
|
||
|
Arnd Bergmann
|
3ce8f4a501 |
ARM: omap1: avoid symbol clashes in fiq handler
The ams-delta-fiq-handler.S file has a number of symbols with fairly generic names, including one named 'exit' that causes a compiler warning in some configuration options: vmlinux.o: error: exit() function name creates ambiguity with -ffunction-sections Change all these symbols to use a .L prefix to make them local to the fiq handler. Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20251204095355.1032786-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Mark Brown
|
79a45ddcdb |
regulator: fixed: Rely on the core freeing the enable GPIO
In order to simplify ownership rules for enable GPIOs supplied by drivers
regulator_register() always takes ownership of them, even if it ends up
failing for some other reason. We therefore should not free the GPIO if
registration fails but just let the core worry about things.
Fixes:
|
||
Denis Arefev
|
c34b04cc61 |
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
|
||
Thomas Weißschuh
|
fe93446b5e |
vfs: use UAPI types for new struct delegation definition
Using libc types and headers from the UAPI headers is problematic as it introduces a dependency on a full C toolchain. Use the fixed-width integer types provided by the UAPI headers instead. Fixes: |
||
Edward Adam Davis
|
8cf01d0c43 |
mqueue: correct the type of ro to int
The ro variable, being of type bool, caused the -EROFS return value from
mnt_want_write() to be implicitly converted to 1. This prevented the file
from being correctly acquired, thus triggering the issue reported by
syzbot [1].
Changing the type of ro to int allows the system to correctly identify
the reason for the file open failure.
[1]
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
Call Trace:
do_mq_open+0x5a0/0x770 ipc/mqueue.c:932
__do_sys_mq_open ipc/mqueue.c:945 [inline]
__se_sys_mq_open ipc/mqueue.c:938 [inline]
__x64_sys_mq_open+0x16a/0x1c0 ipc/mqueue.c:938
Fixes:
|
||
Christian Brauner
|
afb9917d9b |
Revert "net/socket: convert sock_map_fd() to FD_ADD()"
This reverts commit
|
||
Eric Sandeen
|
3e281113f8 |
9p: fix new mount API cache option handling
After commit
|
||
|
Eric Sandeen
|
f044561331 |
9p: fix cache/debug options printing in v9fs_show_options
commit |
||
Abdun Nihaal
|
164312662a |
fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe()
The page allocated for vmem using __get_free_pages() is not freed on the
error paths after it. Fix that by adding a corresponding __free_pages()
call to the error path.
Fixes:
|
||
Dan Carpenter
|
479acb9db3 |
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
The drm_property_create_signed_range() function doesn't return error
pointers it returns NULL on error. Fix the error checking to match.
Fixes:
|