The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
MAX77705 charger is most likely always a single device on the board,
however nothing stops board designers to have two of them, thus same
device driver could probe twice. Or user could manually try to probing
second time.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77705_charger_data'). devm_regmap_add_irq_chip()
does not make a copy of 'struct regmap_irq_chip' but stores the pointer.
Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023102905.71535-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add an entry for BD71828 charger driver.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250918-bd71828-charger-v5-3-851164839c28@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add charger driver for ROHM BD718(15/28/78) PMIC charger block.
It is a stripped down version of the driver here:
https://lore.kernel.org/lkml/dbd97c1b0d715aa35a8b4d79741e433d97c562aa.1637061794.git.matti.vaittinen@fi.rohmeurope.com/
For the ease of review and to do a step-by-step approach remove all the
coloumb counter related stuff and do not sneak in BD71827 support. That
also avoids non-trivial rebasing of the above series.
Changes besides that:
Replace the custom property by a standard one and do not use megaohms
for the current sense resistor.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20250918-bd71828-charger-v5-2-851164839c28@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The future move of pin-init to `syn` uncovers the following broken
intra-doc link:
error: unresolved link to `crate::pin_init`
--> rust/kernel/sync/condvar.rs:39:40
|
39 | /// instances is with the [`pin_init`](crate::pin_init!) and [`new_condvar`] macros.
| ^^^^^^^^^^^^^^^^ no item named `pin_init` in module `kernel`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Currently, when rendered, the link points to a literal `crate::pin_init!`
URL.
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: 129e97be8e ("rust: pin-init: fix documentation links")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251029073344.349341-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The future move of pin-init to `syn` uncovers the following private
intra-doc link:
error: public documentation for `Devres` links to private item `Self::inner`
--> rust/kernel/devres.rs:106:7
|
106 | /// [`Self::inner`] is guaranteed to be initialized and is always accessed read-only.
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::private_intra_doc_links)]`
Currently, when rendered, the link points to "nowhere" (an inexistent
anchor for a "method").
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: f5d3ef25d2 ("rust: devres: get rid of Devres' inner Arc")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251029071406.324511-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now as all RPMh interconnect drivers were converted to using the dynamic
IDs, drop support for non-dynamic ID allocation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-25-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-24-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-23-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-22-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-21-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-20-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-19-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-18-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-17-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-16-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-15-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-14-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-13-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-12-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-11-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-10-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-9-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-8-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-7-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-6-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-5-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-4-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-3-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-2-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Declaring link_nodes as a double-pointer results in a syntax sugar in
the interconnect driver to typecast the array. Change the type of
link_nodes field to the array to remove the need for the extra typecast.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-1-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Along the code reorganizations, the file has been keeping the original
comments about argv and envp which are no longer relevant to this file
anymore. Let's just drop them.
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The temperature is not from the die itself but from an NTC. That was
verified with an IR camera. Fix that.
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Link: https://lore.kernel.org/r/20251027202847.119707-1-akemnade@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for dht20 temperature and humidity sensor from Aosong.
Modify aht10 driver to handle different init command for dht20 sensor by
adding init_cmd entry in the driver data. dht20 sensor is compatible with
aht10 hwmon driver with this change.
Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Update maxim-ic.com & maximintegrated.com links to analog.com links.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017163501.11285-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Missing datasheets now available at Analog Devices added.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017161422.4404-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Broken redirects fixed to their proper analog.com links.
Fixes warnings in 'make linkcheckdocs'.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017154755.32105-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a node for the Dongwoon DW9800K actuator, used for focus of the
ultra-wide camera sensor.
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20251016-dw9800-driver-v3-4-d7058f72ead4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable vreg_l6p, which is the voltage source for the pull-up resistor of
the CCI busses.
This ensures that I2C communication works as expected.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20251016-dw9800-driver-v3-3-d7058f72ead4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the
convention used by other Qualcomm SoCs.
Suggested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-5-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These are present on msm8960 and are required for devices such as the
Casio G'zOne, which has NFC wired to gsbi1 and audio amplifier wired to
gsbi8.
The nodes are added disabled by default.
Co-developed-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-4-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These are present on msm8960 and are required for devices such as the
Sony Xperia SP, which has NFC wired to gsbi10 and various motion
sensors wired to gsbi12.
The nodes are added disabled by default.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-3-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Inline qcom-msm8960-pins.dtsi into the main SoC dtsi. Most Qualcomm
SoCs embed their TLMM definitions directly, with only msm8960 and
apq8064 using a separate pins file. After this change, only apq8064
remains split.
This is a cosmetic change only, with no functional impact.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Tested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-2-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reorder the nodes in qcom-msm8960.dtsi by unit address and sort
properties, as recommended in the Devicetree style guide. This is a
cosmetic change only, with no functional impact.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Tested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-1-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable USB support on SM8750 QRD variant. Add the PMIC glink node with
connector to enable role switch support.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[Konrad: Provided diff to flatten USB node on MTP]
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251101174437.1267998-4-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable USB support on SM8750 MTP variant. Add the PMIC glink node with
connector to enable role switch support.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[Konrad: Provided diff to flatten USB node on MTP]
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251101174437.1267998-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
