Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Now that the full class driver is in place we can add support to the
Intel machine driver for Cirrus's new SDCA audio CODEC the cs42l45. This
makes some minor tweaks to the machine driver itself to support SDCA
devices, and then adds the necessary tables etc. to define the device.
Note, this series shouldn't have any dependencies on the other series of
improvements to the class driver that is already on the list. So either
can be merged first.
strncpy() is deprecated for NUL-terminated destination buffers; use
strscpy_pad() instead to retain the NUL-padding behavior of strncpy().
The destination buffer is initialized using kzalloc() with a 'signature'
size of ECRYPTFS_PASSWORD_SIG_SIZE + 1. strncpy() then copies up to
ECRYPTFS_PASSWORD_SIG_SIZE bytes from 'key_desc', NUL-padding any
remaining bytes if needed, but expects the last byte to be zero.
strscpy_pad() also copies the source string to 'signature', and NUL-pads
the destination buffer if needed, but ensures it's always NUL-terminated
without relying on it being zero-initialized.
strscpy_pad() automatically determines the size of the fixed-length
destination buffer via sizeof() when the optional size argument is
omitted, making an explicit size unnecessary.
In encrypted_init(), the source string 'key_desc' is validated by
valid_ecryptfs_desc() before calling ecryptfs_fill_auth_tok(), and is
therefore NUL-terminated and satisfies the __must_be_cstr() requirement
of strscpy_pad().
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The local variables 'size_t datalen' are unsigned and cannot be less
than zero. Remove the redundant conditions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSiH8AAKCRB4tDGHoIJi
0nvqAQCJMelvf23z8LR/GcUmJlB5eWc/+g5JAyy/4HiFH6hAiAEAgOPVRGjH3sav
3RGf+SFZWLRmPQcG2mguckc7I+RUSQo=
=g/Rw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkzr
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.19
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add Orange Pi RV
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
riscv: dts: starfive: Add VisionFive 2 Lite board device tree
riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
MAINTAINERS: degrade RISC-V MISC SOC SUPPORT to Odd Fixes
MAINTAINERS: add tree to RISC-V Microchip entry
MAINTAINERS: remove patchwork from RISC-V MISC SOC SUPPORT
MAINTAINERS: add Conor to StarFive entry
riscv: dts: sifive: unmatched: Add PWM controlled fans
riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the Cirrus Logic CS42L45 standalone using SoundWire.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the helper functions into the machine driver for the cs42l45,
this will register a jack for jack detection and add things into
to the components string if they are needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the sof_sdw machine driver assumes that all devices involved
in the sound card are connected through a DAI link. However for SDCA
devices we still want the HID (Human Interface Device, used for jack
buttons) to be part of the sound card, but it contains no DAI links.
Add support into the machine driver to specify a list of auxiliary
devices to merged into the card.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As SDCA devices will support each DAI link on a different child device,
move the codec name from codec_info to each dai_info. To allow the
appropriate function device to be bound to each DAI link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The assumption so far is that all the DAI links for a given audio part
would be on the same device. However, as SDCA implements each audio
function on a separate auxiliary driver this will no longer be true.
This means it is necessary to add additional codec_conf structures to
get the prefix for an audio part to apply to all the auxiliary drivers
that make up that part.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been some complaints around the UCM files for SDCA
devices that the control system is quite hard to follow. This is
definitely true without the specification handy the naming can be
a little cryptic. However, as most of the information is parsed
from DisCo there are some limits to what the driver can safely do
to improve this.
However, one area that can be improved is the non-streaming
input/output terminals. These have a field (enum sdca_terminal_type)
that describes the usage of that terminal. These types can be
appended to the entity name to give the users a better clue as
to the purpose. For example "OT 43", would now become "OT 43
Headphone". This would follow through into the jack controls which
would change from "OT 43 Jack" to "OT 43 Headphone Jack", making the
purpose much more obvious to the user.
This provides slightly more readable controls without relying on
implicit knowledge that individual parts might not conform to.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently mute controls will be called "FU xx Mute Switch" (note
the switch is added programmatically outside the coverage of this
patch) and the accompanying volume control would be called "FU xx
Channel Volume". These names are taken from the SDCA specification,
however, this does not mesh well with the ALSA naming system. ALSA
generally expects enables rather than mutes and expects that mutes
and volumes have matching names.
Update the names and invert the mute controls to make them more
standard "FU XX Channel Switch", this does slightly deviate from
the SDCA specification but it makes the rest of the Linux ecosystem
a lot happier.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmkomw8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7inB/4kGwlnraCx43Lw4UG4K/Z6RKypQ8zD
WxwFvszq9jHJL7uUvXLx97sZApeK+AG6Kql/jnpEUUkFlG1h3013OwKJgRINrOdn
5wJaWwi73akCWt3FDgcpc+gnxQ3s7gbD3cPbNeEhoHTjUrHk59ZgT37zbnUIrFK3
NqnSBO7+7EPZtWwmC7mtki+lRLr3z47TqeqLqLQhw6GoenRo/9ZrUynvneCWKXfT
bZRZ5MDJGg/ZMR1agPmUojgHkkZAD5xc21fK5mmYeMr9JbNB4Vw9BO48XW+WCA3o
TH5en6HZhJuoxkp21mG7BZjnkAVTPCpo3pMt2IqlAIWCkODtXlThWGQN
=cZYx
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to make sparse read handling work in msgr2 secure mode from
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable"
* tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client:
libceph: prevent potential out-of-bounds writes in handle_auth_session_key()
libceph: replace BUG_ON with bounds check for map->max_osd
ceph: fix crash in process_v2_sparse_read() for encrypted directories
libceph: drop started parameter of __ceph_open_session()
libceph: fix potential use-after-free in have_mon_and_osd_map()
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c37 ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The define ARM64_FEATURE_FIELD_BITS is now unused and feature id
fields don't always have 4 bits. Remove it.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In test_clidr() if an empty cache level is not found then the TEST_ASSERT
will not fire. Fix this by considering all 7 possible levels when iterating
through the hierarchy. Found by inspection.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARM64_FEATURE_FIELD_BITS is set to 4 but not all ID register fields are 4
bits. See for instance ID_AA64SMFR0_EL1. The last user of this define,
ARM64_FEATURE_FIELD_BITS, is the set_id_regs selftest. Its logic assumes
the fields aren't a single bits; assert that's the case and stop using the
define. As there are no more users, ARM64_FEATURE_FIELD_BITS is removed
from the arm64 tools sysreg.h header. A separate commit removes this from
the kernel version of the header.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ATOMIC_FETCH_OP_AND and ATOMIC64_FETCH_OP_AND macros accept 'mb' and
'cl' parameters but never use them in their implementation. These macros
simply delegate to the corresponding andnot functions, which handle the
actual atomic operations and memory barriers.
Signed-off-by: Seongsu Park <sgsu.park@samsung.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The driver uses DMA but does not mark it as a prerequisite in
Kconfig. As it is also defined with COMPILE_TEST, autobuilders complain
about certain symbols not being available when linking on architectures
without DMA support (?) like sh.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511071114.8WeW2GZK-lkp@intel.com
Cc: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth: veth: reduce XDP no_direct return section to fix race
- eth: virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth: r8169: fix RTL8127 hang on suspend/shutdown
- eth: aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0MuR
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
Merge series from Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>:
Airoha EN7523 snfi controller almost identical to AN7581 one, so the same
driver can be used. The only known difference appears in the very specific
boot conditions, when attached serial console force EN7523 SoC boots
in undocumented (reserved) mode. In this mode dma reading of the flash
works incorrectly.
This patch series:
* add support of EN7523 SoC
* add spinand node to en7523 dts (so spinand flash finally becomes usable)
* updates dt-bindings to mark driver as compatible with en7523
* disable dma usage to prevent possible data damage if booting in
reserved mode was detected.
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the __free(kfree) cleanup to replace instances of manually
calling kfree(). Also make some code path simplifications that this
allows.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127155817.1374079-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 3a2a8cc3fe ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org # 6.12
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251127134351.1585-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Static declaration by default are 0 or NULL, no need to initialise
them explicitly. Remove unneeded PM related macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First of all, the convention in the kernel that we do not issue
error messages for -ENOMEM. Second, it's ignored by dev_err_probe().
Replace dead code by a simple return statement.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
min_t(int, a, b) casts an 'unsigned int' to 'int'. This might lead
to the cases when big number is wrongly chosen. On the other hand,
the SPI transfer length is unsigned and driver uses signed type for
an unknown reason. Change the type of the transfer length to be
unsigned and convert use min() instead of min_t().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to drop the reference taken when looking up the PMU device and
its regmap.
Note that holding a reference to a device does not prevent its regmap
from going away so there is no point in keeping the reference.
Fixes: 0b7c607502 ("soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs")
Cc: stable@vger.kernel.org # 6.9
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121121852.16825-1-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
fill_pool_map is used to suppress nesting violations caused by acquiring
a spinlock_t (from within the memory allocator) while holding a
raw_spinlock_t. The used annotation is wrong.
LD_WAIT_SLEEP is for always sleeping lock types such as mutex_t.
LD_WAIT_CONFIG is for lock type which are sleeping while spinning on
PREEMPT_RT such as spinlock_t.
Use LD_WAIT_CONFIG as override.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127153652.291697-3-bigeasy@linutronix.de
The pool of free objects is refilled on several occasions such as object
initialisation. On PREEMPT_RT refilling is limited to preemptible
sections due to sleeping locks used by the memory allocator. The system
boots with disabled interrupts so the pool can not be refilled.
If too many objects are initialized and the pool gets empty then
debugobjects disables itself.
Refiling can also happen early in the boot with disabled interrupts as
long as the scheduler is not operational. If the scheduler can not
preempt a task then a sleeping lock can not be contended.
Allow to additionally refill the pool if the scheduler is not
operational.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127153652.291697-2-bigeasy@linutronix.de
The devm_ioremap_resource_wc() function never returns NULL, it returns
error pointers. Update the error checking to match.
Fixes: 67a7bc7f03 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/aSf6OerBbPcxBUVt@stanley.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The recent transition to use of_reserved_mem_region_to_resource()
changes the while loop to a for loop, but the increment of the "index"
variable was left behind at the end of the loop, as highlighted by the
following error/warning:
error: variable 'index' is incremented both in the loop header and in the loop body [-Werror,-Wfor-loop-analysis]
Drop the extra increment to avoid skipping over every other
memory-region in the loop.
Fixes: 67a7bc7f03 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-st-remoteproc-double-index-v1-1-3b0a8b21ac18@oss.qualcomm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Detailed description for this pull request:
- Move governor.h under include/linux/ and rename to devfreq-governor.h
in order to allow devfreq governor definitions in out of drivers/devfreq/.
- Fix potential use-after-free issue of OPP handling on hisi_uncore_freq.c
- Use min() to improve the readability on tegra30-devfreq.c
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name on governor_simpleondemand.c
-----BEGIN PGP SIGNATURE-----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=dEyH
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for v6.19 from Chanwoo Choi:
"- Move governor.h under include/linux/ and rename to devfreq-governor.h
in order to allow devfreq governor definitions in out of drivers/devfreq/.
- Fix potential use-after-free issue of OPP handling on hisi_uncore_freq.c
- Use min() to improve the readability on tegra30-devfreq.c
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name on governor_simpleondemand.c"
* tag 'devfreq-next-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
Online repair is now merged in upstream, no need to point to patchset
links anymore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01 ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for
gs101") added system wide suspend/resume callbacks to Exynos PMU driver,
but some items used by these callbacks are initialized only on
GS101-compatible boards. Move that initialization to exynos_pmu_probe()
to avoid potential lockdep warnings like below observed during system
suspend/resume cycle:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 2134 Comm: rtcwake Not tainted 6.18.0-rc7-next-20251126-00039-g1d656a1af243 #11794 PREEMPT
Hardware name: Samsung Exynos (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from register_lock_class+0x970/0x988
register_lock_class from __lock_acquire+0xc8/0x29ec
__lock_acquire from lock_acquire+0x134/0x39c
lock_acquire from _raw_spin_lock+0x38/0x48
_raw_spin_lock from exynos_cpupm_suspend_noirq+0x18/0x34
exynos_cpupm_suspend_noirq from dpm_run_callback+0x98/0x2b8
dpm_run_callback from device_suspend_noirq+0x8c/0x310
Fixes: 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for gs101")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126110038.3326768-1-m.szyprowski@samsung.com
[krzk: include calltrace into commit msg]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The macro for_each_console_srcu iterates over all registered consoles. It's
implied that all registered consoles have CON_ENABLED flag set, making
the check for the flag unnecessary. Call console_is_usable function to
fully verify if the given console is usable before calling the ->unblank
callback.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-3-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
All consoles found on for_each_console are registered, meaning that all
of them have the CON_ENABLED flag set. Since NBCON was introduced it's
important to check if a given console also implements the NBCON callbacks.
The function console_is_usable does exactly that.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-2-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
