Use generic RPMPD_* defines for power domain instead of using
platform-specific defines for the platforms that use shared indices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-4-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The `us144mkii.c` driver was generating sparse warnings due to direct
comparisons of `dev->descriptor.idProduct` (a `__le16` type) with
integer constants. This commit resolves these warnings by explicitly
converting `idProduct` to a CPU-endian integer using `le16_to_cpu()`
before comparison.
This ensures correct handling of endianness and eliminates the sparse
warnings:
- `restricted __le16 degrades to integer`
Fixes: dee1bcf28a ("ALSA: usb-audio: Add initial driver for TASCAM US-144MKII")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508190811.tjQJZI1X-lkp@intel.com/
Signed-off-by: Šerif Rami <ramiserifpersia@gmail.com>
Link: https://patch.msgid.link/20250819075118.9221-1-ramiserifpersia@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of the Qualcomm RPM PD controllers use a common set of indices for
power domains. Add generic indices for Qualcomm RPM power domain
controllers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-3-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After removing RPMh PD indices, it becomes obvious that several entries
don't follow the alphabetic sorting order. Move them in order to keep
the file sorted.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-2-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Historically both RPM and RPMh domain definitions were a part of the
same, qcom-rpmpd.h header. Now as we have a separate header for RPMh
definitions, qcom,rpmhpd.h, move all RPMh power domain definitions to
that header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-1-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.
Fixes: f6efc675c9 ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-2-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure ndo_fill_forward_path() is called with RCU lock held.
Fixes: 2830e31477 ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mark dm error as DM_TARGET_PASSES_INTEGRITY so that it can be stacked on
top of PI capable devices. The claim is strictly speaking as lie as dm
error fails all I/O and doesn't pass anything on, but doing the same for
integrity I/O work just fine :)
This helps to make about two dozen xfstests test cases pass on PI capable
devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm-vdo docs currently has no explicit title heading but instead there
are multiple section headings as top-level heading. As such, these
sections are rendered as titles and inflates number of entries in the
toctree index.
Promote the first section heading ("dm-vdo") to title heading.
Fixes: 04bf7ac646 ("dm: add documentation for dm-vdo target")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
GFP_NOWAIT already includes __GFP_NOWARN, so let's remove the redundant
__GFP_NOWARN. Also update comments to clarify the flag semantics.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Remove array_size() calls and replace vmalloc() with vmalloc_array() to
simplify the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Following commit ebbd17695e ("dm: ima: avoid extra calls to
strlen()"), convert 'dm_ima_alloc_and_copy_capacity_str()' to
return the number of characters emitted by 'scnprintf()' and
simplify the users accordingly. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Add support to collect XDP stats via ethtool API. We record
packets and bytes sent, and packets dropped on the XDP_TX path.
ethtool -S eth0 | grep xdp | grep -v "0"
xdp_tx_queue_13_packets: 2
xdp_tx_queue_13_bytes: 16126
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-10-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for XDP statistics collection and reporting via rtnl_link
and netdev_queue API.
For XDP programs without frags support, fbnic requires MTU to be less
than the HDS threshold. If an over-sized frame is received, the frame
is dropped and recorded as rx_length_errors reported via ip stats to
highlight that this is an error.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-9-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for XDP_TX action and cleaning the associated work.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-8-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for allocating XDP_TX queues and configuring ring support.
FBNIC has been designed with XDP support in mind. Each Tx queue has 2
submission queues and one completion queue, with the expectation that
one of the submission queues will be used by the stack, and the other
by XDP. XDP queues are populated by XDP_TX and start from index 128
in the TX queue array.
The support for XDP_TX is added in the next patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-7-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add basic support for attaching an XDP program to the device and support
for PASS/DROP/ABORT actions. In fbnic, buffers are always mapped as
DMA_BIDIRECTIONAL.
The BPF program pointer can be read either on a per-packet basis or on a
per-NAPI poll basis. Both approaches are functionally equivalent, in the
current code. Stick to per-packet as it limits number of arguments we need
to pass around.
On the XDP hot path, check that packets with fragments are only allowed
when multi-buffer support is enabled for the XDP program. Ideally, this
check should not be necessary because ndo_bpf verifies that for XDP
programs without multi-buff support, MTU is less than the hds_thresh.
However, the MTU currently does not enforce the receive size which would
require cleaning up the data path and bouncing the link. For practical
reasons, prioritize the ability to enter and exit BPF mode with different
MTU sizes without requiring a full reconfig.
Testing:
Hook a simple XDP program that passes all the packets destined for a
specific port
iperf3 -c 192.168.1.10 -P 5 -p 12345
Connecting to host 192.168.1.10, port 12345
[ 5] local 192.168.1.9 port 46702 connected to 192.168.1.10 port 12345
[ ID] Interval Transfer Bitrate Retr Cwnd
- - - - - - - - - - - - - - - - - - - - - - - - -
[SUM] 1.00-2.00 sec 3.86 GBytes 33.2 Gbits/sec 0
XDP_DROP:
Hook an XDP program that drops packets destined for a specific port
iperf3 -c 192.168.1.10 -P 5 -p 12345
^C- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[SUM] 0.00-0.00 sec 0.00 Bytes 0.00 bits/sec 0 sender
[SUM] 0.00-0.00 sec 0.00 Bytes 0.00 bits/sec receiver
iperf3: interrupt - the client has terminated
XDP with HDS:
- Validate XDP attachment failure when HDS is low
~] ethtool -G eth0 hds-thresh 512
~] sudo ip link set eth0 xdpdrv obj xdp_pass_12345.o sec xdp
~] Error: fbnic: MTU too high, or HDS threshold is too low for single
buffer XDP.
- Validate successful XDP attachment when HDS threshold is appropriate
~] ethtool -G eth0 hds-thresh 1536
~] sudo ip link set eth0 xdpdrv obj xdp_pass_12345.o sec xdp
- Validate when the XDP program is attached, changing HDS thresh to a
lower value fails
~] ethtool -G eth0 hds-thresh 512
~] netlink error: fbnic: Use higher HDS threshold or multi-buf capable
program
- Validate HDS thresh does not matter when xdp frags support is
available
~] ethtool -G eth0 hds-thresh 512
~] sudo ip link set eth0 xdpdrv obj xdp_pass_mb_12345.o sec xdp.frags
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-6-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Issue a prefetch for the start of the buffer on Rx to try to avoid cache
miss on packet headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove local fields that track frags state and instead store this
information directly in the shinfo struct. This change is necessary
because the current implementation can lead to inaccuracies in certain
scenarios, such as when using XDP multi-buff support. Specifically, the
XDP program may update nr_frags without updating the local variables,
resulting in an inconsistent state.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fbnic currently reserves a minimum of 64B headroom, but this is
insufficient for inserting additional headers (e.g., IPV6) via XDP, as
only 24 bytes are available for adjustment. To address this limitation,
increase the headroom to a larger value while ensuring better page use.
Although the resulting headroom (192B) is smaller than the recommended
value (256B), forcing the headroom to 256B would require aligning to
256B (as opposed to the current 128B), which can push the max headroom
to 511B.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for configuring the header data split threshold.
For fbnic, the tcp data split support is enabled all the time.
Fbnic supports a maximum buffer size of 4KB. However, the reservation
for the headroom, tailroom, and padding reduce the max header size
accordingly.
ethtool_hds -g eth0
Ring parameters for eth0:
Pre-set maximums:
...
HDS thresh: 3584
Current hardware settings:
...
HDS thresh: 1536
Verify hds tests in ksft-net-drv are passing
ksft-net-drv]# ./drivers/net/hds.py
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by ...
...
...
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
\# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current GDS mitigation logic incorrectly returns early when the
attack vector mitigation is turned off, which leads to two problems:
1. CPUs without ARCH_CAP_GDS_CTRL support are incorrectly marked with
GDS_MITIGATION_OFF when they should be marked as
GDS_MITIGATION_UCODE_NEEDED.
2. The mitigation state checks and locking verification that follow are
skipped, which means:
- fail to detect if the mitigation was locked
- miss the warning when trying to disable a locked mitigation
Remove the early return to ensure proper mitigation state handling. This
allows:
- Proper mitigation classification for non-ARCH_CAP_GDS_CTRL CPUs
- Complete mitigation state verification
This also addresses the failed MSR 0x123 write attempt at boot on
non-ARCH_CAP_GDS_CTRL CPUs:
unchecked MSR access error: WRMSR to 0x123 (tried to write 0x0000000000000010) at rIP: ... (update_gds_msr)
Call Trace:
identify_secondary_cpu
start_secondary
common_startup_64
WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/bugs.c:1053 update_gds_msr
[ bp: Massage, zap superfluous braces. ]
Fixes: 8c7261abcb ("x86/bugs: Add attack vector controls for GDS")
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/20250819023356.2012-1-lirongqing@baidu.com
On HP laptops with an ov08x40 sensor the 25 ms delay coming from Intel's
out of tree drivers is not enough. Testing has confirmed that 45 ms does
work.
Add a quirk to the int3472_gpio_map[] to increase the delay to 45 ms to fix
probing of the ov08x40 sensor failing on these laptops.
Note this only impacts laptops which actually use an ov08x40 sensor with
a handshake GPIO.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2333331
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250725215259.402796-4-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Instead of hardcoding the regulator enable-time for INT3472_GPIO_TYPE-
POWER_ENABLE and -HANDSHAKE, make int3472_get_con_id_and_polarity()
set the enable-time.
This will allow overriding the enable time through quirks in
the int3472_gpio_map[].
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250725215259.402796-3-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert int3472_gpio_map to use C99 initializers to make it clearer which
struct field is set to which value.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250725215259.402796-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Store fsb_freq and mem_freq in dram info the same way we do for other
memory info on later platforms for a slightly more unified approach.
This allows us to remove fsb_freq, mem_freq and is_ddr3 members from
struct drm_i915_private and struct xe_device.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/a38c4b105ba9098fa0b128cb86cd4eb63bcc27e8.1755511595.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Non-display now calls the intel_fsb_freq() and intel_mem_freq()
functions, so we don't have to have the frequencies initialized for dg2
or non-display cases.
This is in preparation for unifying the pre-gen9 handling in dram info.
DG2 remains a special case as described in commit 5eb6bf0b44
("drm/i915/dg2: Don't read DRAM info").
v2: Rebase
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/7bfed06d431354f3918ea73d43a2ec8ed9426a76.1755511595.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both i915_switcheroo_set_state() and i915_switcheroo_can_switch() check
for i915 == NULL. Commit d2e184f8e1 ("drm/i915/switcheroo: pass
display to HAS_DISPLAY()") started dereferencing it before the NULL
check. Fix it.
Fixes: d2e184f8e1 ("drm/i915/switcheroo: pass display to HAS_DISPLAY()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202508160035.hmzuKiww-lkp@intel.com/
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250818071605.2541523-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From bpftool's github repository issue [0]: When a Linux distribution
has the kernel.kptr_restrict set to 2, bpftool prog dump jited returns
"no instructions returned". This message can be puzzling to bpftool
users who are not familiar with kernel BPF internals, so add a small
hint for bpftool users to check the kernel.kptr_restrict setting
similar to the DUMP_XLATED case. Outside of kernel.kptr_restrict, no
instructions could also be returned in case the JIT was disabled.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/libbpf/bpftool/issues/184 [0]
Link: https://lore.kernel.org/bpf/20250818165113.15982-1-vincent.mc.li@gmail.com
The PCIe Gen3 x2 PHY for SM8750 uses new phy, add the
required registers and offsets for this phy.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250809-pakala-v1-2-abf1c416dbaa@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CACHE_MODE_0 registers should be saved and restored as part of
the context, not during engine reset. Move the related workaround
(Disable Repacking for Compression) from rcs_engine_wa_init()
to icl_ctx_workarounds_init() for Jasper Lake and Elkhart
Lake platforms. This ensures the WA is applied during context
initialisation.
BSPEC: 11322
Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Closes: Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/4feaa24094e019e000ceb6011d8cd419b0361b3f.1754902406.git.sebastian.brzezinka@intel.com
(cherry picked from commit c9932f0d60)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Commit 8d9908e8fe ("drm/i915/display: remove small micro-optimizations
in irq handling") not only removed the optimizations, it also enabled
wakeref asserts for the GEN11_GU_MISC_IIR access. Silence the asserts by
wrapping the access inside intel_display_rpm_assert_{block,unblock}().
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Closes: https://lore.kernel.org/r/aG0tWkfmxWtxl_xc@zx2c4.com
Fixes: 8d9908e8fe ("drm/i915/display: remove small micro-optimizations in irq handling")
Cc: stable@vger.kernel.org # v6.13+
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250805115656.832235-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit cbd3baeffb)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
