Move the sysrq functionality from DRM fbdev helpers to the DRM device
and in-kernel clients, so that it becomes available on all clients.
DRM fbdev helpers support emergency restoration of the console output
via a special key combination. Press SysRq+v to replace the current
compositor with the kernel's output on the framebuffer console. This
allows users to see the log messages during system emergencies.
By moving the functionality from fbdev helpers to the DRM device, any
in-kernel client can serve as emergency output. This can be used to
bring up drm_log, for example.
Each DRM device registers itself to the list of possible sysrq handlers.
On receiving SysRq+v, the DRM core goes over all registered devices and
restores an in-kernel DRM client for each of them.
See Documentation/admin-guide/sysrq.rst on how to invoke SysRq. Switch
VTs to bring back the user-space compositor.
v2:
- declare placeholders as 'static inline' (kernel test robot)
- fix grammar in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-3-tzimmermann@suse.de
Add force parameter to client restore and pass value through the
layers. The only currently used value is false.
If force is true, the client should restore its display even if it
does not hold the DRM master lock. This is be required for emergency
output, such as sysrq.
While at it, inline drm_fb_helper_lastclose(), which is a trivial
wrapper around drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-2-tzimmermann@suse.de
Add support for the Onkyo SE-300PCIE, a Creative X-Fi CA20K2-based
sound card with a custom hardware implementation that differs
significantly from other CA20K2-based variants.
Changes:
- PCI quirk entry for OK0010
- Port 0x3 is utilized for dedicated RCA output (configured as I2S)
- Modified GPIO pin mappings and states
- 4-channel simultaneous ADC input support for line and microphone
capture without input switching (similar to SB1270)
- Simplified ADC initialization (no manual setup required)
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-7-me@harin.net
Add feature to support switching between the dedicated RCA output and
the 7.1ch Front output. This is required for hardware that utilizes
separate DAC circuits for RCA and 7.1ch channels.
Changes:
- Add dedicated_rca capability flag
- Add "Analog Playback Route" mixer control
- Implement logic to swap DAO inputs between RCA and Front ports
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-6-me@harin.net
Refactor atc_get_resources(), atc_connect_resources(), and
atc_release_resources() to allocate resources based on maximum type
definitions.
This allows specific resources to be conditionally skipped based on
capabilities. This is necessary for hardware variants where resource
allocations do not follow a sequential order.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-5-me@harin.net
Replace the index-based type check with an explicit output flag in
struct daio and struct daio_desc.
This allows handling DAIO resource types correctly regardless of their
index. This is necessary for hardware variants where resource types do
not follow a sequential order.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-4-me@harin.net
Add helper functions hw_adc_stop(), hw_adc_start(), and hw_adc_reset()
to encapsulate ADC reset sequence operations. These functions reduce
duplication by centralizing the GPIO-based ADC control logic.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-3-me@harin.net
Add a hw parameter to the daio_mgr_dao_init() function to provide
access to model-specific information. This is necessary for proper
configuration of S/PDIF and I2S output ports on different hardware
variants.
Signed-off-by: Harin Lee <me@harin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251124180501.2760421-2-me@harin.net
The maxpacksize field in struct audioformat represents the maximum number
of bytes per isochronous interval. The current implementation only
special-cases high-speed endpoints and does not account for the different
computations required for SuperSpeed, SuperSpeedPlus, or eUSB2. As a
result, USB audio class devices operating at these speeds may fail to
stream correctly. The issue was observed on a MOTU 16A (2025) interface,
which requires more than 1024 bytes per interval at SuperSpeed.
This patch replaces the existing logic with a helper that computes the
correct maximum bytes-per-interval for all USB speeds, borrowing the logic
used in drivers/usb/core/urb.c.
Signed-off-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://patch.msgid.link/20251124210518.90054-1-dylan_robinson@motu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCIe IP available on the Renesas RZ/G3S complies with the PCI Express
Base Specification 4.0. It is designed for root complex applications and
features a single-lane (x1) implementation. Add binding documentation for
it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251119143523.977085-2-claudiu.beznea.uj@bp.renesas.com
Matthieu Baerts says:
====================
mptcp: memcg accounting for passive sockets & backlog processing
This series is split in two: the 4 first patches are linked to memcg
accounting for passive sockets, and the rest introduce the backlog
processing. They are sent together, because the first one appeared to be
needed to get the second one fully working.
The second part includes RX path improvement built around backlog
processing. The main goals are improving the RX performances _and_
increase the long term maintainability.
- Patches 1-3: preparation work to ease the introduction of the next
patch.
- Patch 4: fix memcg accounting for passive sockets. Note that this is a
(non-urgent) fix, but it depends on material that is currently only in
net-next, e.g. commit 4a997d49d9 ("tcp: Save lock_sock() for memcg
in inet_csk_accept().").
- Patches 5-6: preparation of the stack for backlog processing, removing
assumptions that will not hold true any more after the backlog
introduction.
- Patches 7,8,10,11,12 are more cleanups that will make the backlog
patch a little less huge.
- Patch 9: somewhat an unrelated cleanup, included here not to forget
about it.
- Patches 13-14: The real work is done by them. Patch 13 introduces the
helpers needed to manipulate the msk-level backlog, and the data
struct itself, without any actual functional change. Patch 14 finally
uses the backlog for RX skb processing. Note that MPTCP can't use the
sk_backlog, as the MPTCP release callback can also release and
re-acquire the msk-level spinlock and core backlog processing works
under the assumption that such event is not possible.
A relevant point is memory accounts for skbs in the backlog. It's
somewhat "original" due to MPTCP constraints. Such skbs use space from
the incoming subflow receive buffer, do not use explicitly any forward
allocated memory, as we can't update the msk fwd mem while enqueuing,
nor we want to acquire again the ssk socket lock while processing the
skbs. Instead the msk borrows memory from the subflow and reserve it
for the backlog, see patch 5 and 14 for the gory details.
====================
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-0-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing temperature and fan sensors to Pro WS TRX50-SAGE WIFI
Also:
- Format VRM names to match the BIOS
- Fix swapped VRM_E and VRM_W entries
Signed-off-by: 小太 <nospam@kota.moe>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251125040140.277756-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit f43fdeb9a3, reversing
changes made to 2c6d792d4b.
There are concerns that doing inline submits can cause excessive
stack usage, particularly when going back into the filesystem. Revert
the loop dio nowait change for now.
Link: https://lore.kernel.org/linux-block/aSP3SG_KaROJTBHx@infradead.org/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the msk socket is owned or the msk receive buffer is full,
move the incoming skbs in a msk level backlog list. This avoid
traversing the joined subflows and acquiring the subflow level
socket lock at reception time, improving the RX performances.
When processing the backlog, use the fwd alloc memory borrowed from
the incoming subflow. skbs exceeding the msk receive space are
not dropped; instead they are kept into the backlog until the receive
buffer is freed. Dropping packets already acked at the TCP level is
explicitly discouraged by the RFC and would corrupt the data stream
for fallback sockets.
Special care is needed to avoid adding skbs to the backlog of a closed
msk and to avoid leaving dangling references into the backlog
at subflow closing time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-14-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are soon using it for incoming data processing.
MPTCP can't leverage the sk_backlog, as the latter is processed
before the release callback, and such callback for MPTCP releases
and re-acquire the socket spinlock, breaking the sk_backlog processing
assumption.
Add a skb backlog list inside the mptcp sock struct, and implement
basic helper to transfer packet to and purge such list.
Packets in the backlog are memory accounted and still use the incoming
subflow receive memory, to allow back-pressure. The backlog size is
implicitly bounded to the sum of subflows rcvbuf.
When a subflow is closed, references from the backlog to such sock
are removed.
No packet is currently added to the backlog, so no functional changes
intended here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-13-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the MPTCP receive path, we release the subflow allocated fwd
memory just to allocate it again shortly after for the msk.
That could increases the failures chances, especially when we will
add backlog processing, with other actions could consume the just
released memory before the msk socket has a chance to do the
rcv allocation.
Replace the skb_orphan() call with an open-coded variant that
explicitly borrows, the fwd memory from the subflow socket instead
of releasing it.
The borrowed memory does not have PAGE_SIZE granularity; rounding to
the page size will make the fwd allocated memory higher than what is
strictly required and could make the incoming subflow fwd mem
consistently negative. Instead, keep track of the accumulated frag and
borrow the full page at subflow close time.
This allow removing the last drop in the TCP to MPTCP transition and
the associated, now unused, MIB.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-12-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, as soon as the PM closes a subflow, the msk stops accepting
data from it, even if the TCP socket could be still formally open in the
incoming direction, with the notable exception of the first subflow.
The root cause of such behavior is that code currently piggy back two
separate semantic on the subflow->disposable bit: the subflow context
must be released and that the subflow must stop accepting incoming
data.
The first subflow is never disposed, so it also never stop accepting
incoming data. Use a separate bit to mark the latter status and set such
bit in __mptcp_close_ssk() for all subflows.
Beyond making per subflow behaviour more consistent this will also
simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-11-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It adds little clarity and there is a single user of such helper,
just inline it in the caller.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-10-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Such function is only used inside protocol.c, there is no need
to expose it to the whole stack.
Note that the function definition most be moved earlier to avoid
forward declaration.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-9-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol is not currently emitting the NL event when the first
subflow is closed before msk accept() time.
By replacing the in use close helper is such scenario, implicitly introduce
the missing notification. Note that in such scenario we want to be sure
that mptcp_close_ssk() will not trigger any PM work, move the msk state
change update earlier, so that the previous patch will offer such
guarantee.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-8-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PM hooks can currently take place when the msk is already shutting
down. Subflow creation will fail, thanks to the existing check at join
time, but we can entirely avoid starting the to be failed operations.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-7-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP currently access ack_seq outside the msk socket log scope to
generate the dummy mapping for fallback socket. Soon we are going
to introduce backlog usage and even for fallback socket the ack_seq
value will be significantly off outside of the msk socket lock scope.
Avoid relying on ack_seq for dummy mapping generation, using instead
the subflow sequence number. Note that in case of disconnect() and
(re)connect() we must ensure that any previous state is re-set.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-6-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP currently generate a dummy data_fin for fallback socket
when the fallback subflow has completed data reception using
the current ack_seq.
We are going to introduce backlog usage for the msk soon, even
for fallback sockets: the ack_seq value will not match the most recent
sequence number seen by the fallback subflow socket, as it will ignore
data_seq sitting in the backlog.
Instead use the last map sequence number to set the data_fin,
as fallback (dummy) map sequences are always in sequence.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-5-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Later patches need to ensure that all MPJ subflows are grafted to the
msk socket before accept() completion.
Currently the grafting happens under the msk socket lock: potentially
at msk release_cb time which make satisfying the above condition a bit
tricky.
Move the MPJ subflow grafting earlier, under the msk data lock, so that
we can use such lock as a synchronization point.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-3-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP will soon need the same functionality for passive sockets,
factor them out in a common helper. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-2-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move out of __inet_accept() the code dealing charging newly
accepted socket to memcg. MPTCP will soon use it to on a per
subflow basis, in different contexts.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geliang Tang <geliang@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-1-1f34b6c1e0b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed a sparse warning:
ipvlan_core.c:56: warning: incorrect type in argument 1
(different base types) expected unsigned int [usertype] a
got restricted __be32 const [usertype] s_addr
Force cast the s_addr to u32
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20251121155112.4182007-1-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count() for the mvpp2 driver.
This simplifies the RX ring count retrieval and aligns mvpp2 with the new
ethtool API for querying RX ring parameters, while keeping the other
rxnfc handlers (GRXCLSRLCNT, GRXCLSRULE, GRXCLSRLALL) intact.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-2-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the mvneta driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-1-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the hyperv netvsc driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by replacing the
switch statement with a direct return of the queue count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-hyperv_gxrings-v1-1-31293104953b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms exhibit very high costs with CONFIG_STACKPROTECTOR_STRONG=y
when a function needs to pass the address of a local variable to external
functions.
eth_type_trans() (and its callers) is showing this anomaly on AMD EPYC 7B12
platforms (and maybe others).
We could :
1) inline eth_type_trans()
This would help if its callers also has the same issue, and the canary cost
would be paid by the callers already.
This is a bit cumbersome because netdev_uses_dsa() is pulling
whole <net/dsa.h> definitions.
2) Compile net/ethernet/eth.c with -fno-stack-protector
This would weaken security.
3) Hack eth_type_trans() to temporarily use skb->dev as a place holder
if skb_header_pointer() needs to pull 2 bytes not present in skb->head.
This patch implements 3), and brings a 5% improvement on TX/RX intensive
workload (tcp_rr 10,000 flows) on AMD EPYC 7B12.
Removing CONFIG_STACKPROTECTOR_STRONG on this platform can improve
performance by 25 %.
This means eth_type_trans() issue is not an isolated artifact.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121061725.206675-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev CI reserves SKIP in selftests for cases which can't be executed
due to setup issues, like missing or old commands. Tests which are
expected to fail must use XFAIL.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251123021601.158709-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit ensures that the required log level is set at the start of
the test iteration.
Part of the cleanup performed at the end of each test iteration resets
the log level (do_cleanup in lib_netcons.sh) to the values defined at the
time test script started. This may cause further test iterations to fail
if the default values are not sufficient.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-netcons-basic-loglevel-v1-1-577f8586159c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
selftests: hw-net: toeplitz: read config from the NIC directly
First patch here tries to auto-disable building the iouring sample.
Our CI will still run the iouring test(s), of course, but it looks
like the liburing updates aren't very quick in distroes and having
to hack around it when developing unrelated tests is a bit annoying.
Remaining 4 patches iron out running the Toeplitz hash test against
real NICs. I tested mlx5, bnxt and fbnic, they all pass now.
I switched to using YNL directly in the C code, can't see a reason
to get the info in Python and pass it to C via argv. The old code
likely did this because it predates YNL.
====================
Link: https://patch.msgid.link/20251121040259.3647749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase the receiver timeout. When running between machines
in different geographic regions the test needs more than
a second to SSH across and send the frames.
The bkg() command that runs the receiver defaults to 5 sec timeout,
so using 4 sec sounds like a reasonable value for the receiver itself.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the simple modulo math with the real indirection table
read from the device. This makes the tests pass for mlx5 and
bnxt NICs.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have YNL support for RSS accessing the RSS info from
C is very easy. Instead of passing the RSS key from Python do it
directly in the C code.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that the NIC under test is configured for pure Toeplitz
hashing, and no input key transform (no symmetric hashing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like the liburing is not updated by distros very aggressively.
Presumably because a lot of packages depend on it. I just updated
to Fedora 43 and it's still on liburing 2.9. The test is 9mo old,
at this stage I think this warrants handling the build failure
more gracefully.
Detect if iouring is recent enough and if not print a warning
and exclude the C prog from build. The Python test will just
fail since the binary won't exist. But it removes the major
annoyance of having to update liburing from sources when
developing other tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This return statement is indented one tab too far. Delete a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/aSBqjtA8oF25G1OG@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are setting up an inode key to lookup parent directory inode but all we
need is the inode's objectid. The use of the key was necessary in the past
but since commit 0202e83fda ("btrfs: simplify iget helpers") we only
need the objectid.
So remove the key variable in the stack and use instead a simple u64 for
the inode's objectid.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have allocated the root with kzalloc() so all the memory is already
zero initialized, therefore it's redundant to assign 0 and NULL to several
of the root members. Remove all of them except the atomic initializations
since atomic_t is an opaque type and it's not a good practice to assume
its internals.
This slightly reduces the binary size.
With gcc 14.2.0-19 from Debian on x86_64, before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1939404 162963 15592 2117959 205147 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1939212 162963 15592 2117767 205087 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Do the remaining btrfs_path conversion to the auto cleaning, this seems
to be the last one. Most of the conversions are trivial, only adding the
declaration and removing the freeing, or changing the goto patterns to
return.
There are some functions with many changes, like __btrfs_free_extent(),
btrfs_remove_from_free_space_tree() or btrfs_add_to_free_space_tree()
but it still follows the same pattern.
Signed-off-by: David Sterba <dsterba@suse.com>
When checking if xattrs were deleted we don't care about their data, but
we are allocating memory for the data and copying it, which only wastes
time and can result in an unnecessary error in case the allocation fails.
So stop allocating memory and copying data by making find_xattr() and
__find_xattr() skip those steps if the given data buffer is NULL.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several checks for unexpected overflows of buffers and path
lengths that makes us fail the send operation with an error if for some
highly unexpected reason they happen. So add the unlikely tag to those
checks to hint the compiler to generate better code, while also making
it more explicit in the source that it's highly unexpected.
With gcc 14.2.0-19 from Debian on x86_64, I also got a small reduction
the text size of the btrfs module.
Before:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1936917 162723 15592 2115232 2046a0 fs/btrfs/btrfs.ko
After:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1936789 162723 15592 2115104 204620 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a root and the objectid of the parent directory, just
pass the directory inode, as like that we can extract both the root and
the objectid, reducing the number of arguments by one. It also makes the
function more consistent with other log tree functions in the sense that
we pass the inode and not only its objectid.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to pass the root as we can extract it from the directory
inode, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
