The condition deciding whether or not to increase cpu_data->tick_intercepts
in teo_update() is reverse, so fix it.
Fixes: d619b5cc67 ("cpuidle: teo: Simplify counting events used for tick management")
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: 0796ddf4a7: cpuidle: teo: Use this_cpu_ptr() where possible
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: 8f3f01082d: cpuidle: governors: teo: Use s64 consistently in teo_update()
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+: b54df61c74: cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
Cc: 6.14+ <stable@vger.kernel.org> 6.14+: 083654ded5: cpuidle: governors: teo: Rework the handling of tick wakeups
Cc: 6.14+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5085160.31r3eYUQgx@rafael.j.wysocki
If the wakeup pattern is clearly dominated by tick wakeups, count those
wakeups as hits on the deepest available idle state to increase the
likelihood of stopping the tick, especially on systems where there are
only 2 usable idle states and the tick can only be stopped when the
deeper state is selected.
This change is expected to reduce power on some systems where state 0 is
selected relatively often even though they are almost idle. Without it,
the governor may end up selecting the shallowest idle state all the time
even if the system is almost completely idle due all tick wakeups being
counted as hits on that state and preventing the tick from being stopped
at all.
Fixes: 4b20b07ce7 ("cpuidle: teo: Don't count non-existent intercepts")
Reported-by: Reka Norman <rekanorman@chromium.org>
Closes: https://lore.kernel.org/linux-pm/CAEmPcwsNMNnNXuxgvHTQ93Mx-q3Oz9U57THQsU_qdcCx1m4w5g@mail.gmail.com/
Tested-by: Reka Norman <rekanorman@chromium.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 92ce5c07b7: cpuidle: teo: Reorder candidate state index checks
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: ea185406d1: cpuidle: teo: Combine candidate state index checks against 0
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: b9a6af26bd: cpuidle: teo: Drop local variable prev_intercept_idx
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: e24f8a55de: cpuidle: teo: Clarify two code comments
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: d619b5cc67: cpuidle: teo: Simplify counting events used for tick management
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 13ed5c4a6d: cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: ddcfa79646: cpuidle: teo: Simplify handling of total events count
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 65e18e6544: cpuidle: teo: Replace time_span_ns with a flag
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 0796ddf4a7: cpuidle: teo: Use this_cpu_ptr() where possible
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: 8f3f01082d: cpuidle: governors: teo: Use s64 consistently in teo_update()
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+: b54df61c74: cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Rebase on commit 0796ddf4a7, changelog update ]
Link: https://patch.msgid.link/6228387.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, during suspend, do nothing; during resume, just sync the
regmap cache to hw regs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20251119140455.10096-1-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 16Z034 and 16Z037 are 8 bits GPIO controllers that share the
same registers and features of the 16Z127 GPIO controller.
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251118083115.9545-1-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
TAS5806M, TAS5806MD, TAS5830 has on-chip DSP without current/voltage
feedback, and in same family with TAS58XX.
TAS2568, TAS2574 is in family with TAS257X.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251117102153.30644-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS5806M, TAS5806MD and TAS5830 is in same family with TAS58XX.
TAS2568, TAS2574 is in family with TAS257X.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251117102153.30644-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the terminating \n to the string during the debugfs file
read instead of creating a string that already has a trailing \n.
This avoids the ugly behaviour of having to include a trailing \n
in the filenames stored to wmfw_file_name and bin_file_name in
struct cs_dsp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert dlg,da9052-i2c.txt to yaml format.
Additional changes:
- compatible string fallback to dlg,da9052 to align existing dts files.
- Add interrupts property.
- Add ref to /schemas/spi/spi-peripheral-props.yaml#
- Add dlg,da9053bc.
Remove dlg,da9053 from trivial-devices.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251114213037.1211907-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
For Security locked drives (drives that have Security enabled, and have
not been Security unlocked by boot firmware), the automatic partition
scanning will result in the user being spammed with errors such as:
ata5.00: failed command: READ DMA
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
sd 4:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 4:0:0:0: [sda] tag#7 Sense Key : Aborted Command [current]
sd 4:0:0:0: [sda] tag#7 Add. Sense: No additional sense information
during boot, because most commands except for IDENTIFY will be aborted by
a Security locked drive.
For a Security locked drive, set capacity to zero, so that no automatic
partition scanning will happen.
If the user later unlocks the drive using e.g. hdparm, the close() by the
user space application should trigger a revalidation of the drive.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Use the local variable instead of the extra pointer dereference when
starting the GC thread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add support for optional GPIO-based enable pin control to PWM LED driver.
Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Implement support for such
GPIO control through the "enable-gpios" device tree property, activating
the pin when LED brightness is non-zero and deactivating it when off.
Tested on i.MX8MP EVK with TPS92380 LED driver chip
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://patch.msgid.link/20251117054511.730246-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Add this property to allow
device trees to specify such GPIO, which will be controlled
automatically by the driver based on the LED brightness state.
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251117054511.730246-1-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 8d933d5c89 ("rtla/timerlat: Add continue action") moved the
code performing on-threshold actions (enabled through --on-threshold
option) to inside the RTLA main loop.
The condition in the loop does not check whether the threshold was
actually exceeded or if stop tracing was requested by the user through
SIGINT or duration. This leads to a bug where on-threshold actions are
always performed, even when the threshold was not hit.
(BPF mode is not affected, since it uses a different condition in the
while loop.)
Add a condition that checks for !stop_tracing before executing the
actions. Also, fix incorrect brackets in hist_main_loop to match the
semantics of top_main_loop.
Fixes: 8d933d5c89 ("rtla/timerlat: Add continue action")
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Reviewed-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
rtla-timerlat allows a *thread* latency threshold to be set via the
-T/--thread option. However, the timerlat tracer calls this *total*
latency (stop_tracing_total_us), and stops tracing also when the
return-to-user latency is over the threshold.
Change the behavior of the timerlat BPF program to reflect what the
timerlat tracer is doing, to avoid discrepancy between stopping
collecting data in the BPF program and stopping tracing in the timerlat
tracer.
Cc: stable@vger.kernel.org
Fixes: e34293ddce ("rtla/timerlat: Add BPF skeleton to collect samples")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251006143100.137255-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
In recently introduced timerlat_free(),
the variable 'nr_cpus' is not assigned.
Assign it with sysconf(_SC_NPROCESSORS_CONF) as done elsewhere.
Remove the culprit: -Wno-maybe-uninitialized. The rest of the
code is clean.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Link: https://lore.kernel.org/r/20251002170846.437888-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The longindex argument of getopt_long() is optional
and tied to the unused local variable option_index.
Remove it to shorten the four longest functions
and make the code neater.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251002123553.389467-2-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The rtla tools have many instances of iterating over CPUs while
checking if they are monitored.
Add a for_each_monitored_cpu() helper macro to make the code
more readable and reduce code duplication.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251002123553.389467-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its
queue are not running.
Fixes: 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5p6s
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
Link: https://patch.msgid.link/20251120085433.8601-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Getting module EEPROM has been supported in TXGBE SP devices, since SFP
driver has already implemented it.
Now add support to read module EEPROM for AML devices. Towards this, add
a new firmware mailbox command to get the page data.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For QSFP modules, there is a possibility that the module cannot be
identified when read I2C immediately in .ndo_open. So just set the flag
WX_FLAG_NEED_MODULE_RESET and do it in the subtask, which always wait
200 ms to identify the module. And this change has no impact on the
original adaptation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support to identify QSFP modules for AML 40G devices. The definition of
GPIO pins follows the design of the QSFP modules, and TXGBE_GPIOBIT_4 is
used for module present.
Meanwhile, implement phylink in XLGMII mode by default, and get the link
state from MAC link.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QSFP supported will be introduced for AML 40G devices, the code related
to identify various modules should be renamed to more appropriate names.
And struct txgbe_hic_i2c_read used to get module information is renamed
as struct txgbe_hic_get_module_info, because another SW-FW command to
read I2C will be added later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use cpumask_weighted_or() instead of cpumask_or() and cpumask_weight() on
the result, which walks the same bitmap twice. Results in 10-20% less
cycles, which reduces the runqueue lock hold time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251119172549.511736272@linutronix.de
CID management OR's two cpumasks and then calculates the weight on the
result. That's inefficient as that has to walk the same stuff twice. As
this is done with runqueue lock held, there is a real benefit of speeding
this up. Depending on the system this results in 10-20% less cycles spent
with runqueue lock held for a 4K cpumask.
Provide cpumask_weighted_or() and the corresponding bitmap functions which
return the weight of the OR result right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.448263340@linutronix.de
mm_update_cpus_allowed() is not required to be invoked for affinity changes
due to migrate_disable() and migrate_enable().
migrate_disable() restricts the task temporarily to a CPU on which the task
was already allowed to run, so nothing changes. migrate_enable() restores
the actual task affinity mask.
If that mask changed between migrate_disable() and migrate_enable() then
that change was already accounted for.
Move the invocation to the proper place to avoid that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.385208276@linutronix.de
This is only used in the scheduler core code, so there is no point to have
it in a global header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251119172549.321259077@linutronix.de
With whitespace checks enabled in the editor this makes eyes bleed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.258651925@linutronix.de
Both the per CPU storage and the data in mm_struct are heavily used in
context switch. As they can end up next to other frequently modified data,
they are subject to false sharing.
Make them cache line aligned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.194111661@linutronix.de
Having a lot of CID functionality specific members in struct task_struct
and struct mm_struct is not really making the code easier to read.
Encapsulate the CID specific parts in data structures and keep them
separate from the stuff they are embedded in.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.131573768@linutronix.de
The CID management is a complex beast, which affects both scheduling and
task migration. The compaction mechanism forces random tasks of a process
into task work on exit to user space causing latency spikes.
Revert back to the initial simple bitmap allocating mechanics, which are
known to have scalability issues as that allows to gradually build up a
replacement functionality in a reviewable way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.068197830@linutronix.de
Merge CMAC-128 and CMAC-256 handlers since they are almost the same.
This removes duplication.
The comment 'MIC = AES-128-CMAC(IGTK, AAD ...' is out-dated since CMAC
is also used with BIGTK, as is the comment for CMAC-256. Simply remove
the comments.
Tested-on: mac80211_hwsim
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-6-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_aes_cmac() and ieee80211_aes_cmac_256() are almost the same.
Merge them. This removes duplication.
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-5-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The added struct is needed when writing generic handler for both CMAC-128
and CMAC-256.
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-3-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The called hash functions could fail thus we should check return values.
Fixes: 26717828b7 ("mac80211: aes-cmac: switch to shash CMAC driver")
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-2-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> systemd_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251120094524.45264-1-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Fixes: f77ae93904 ("[PPPOL2TP]: Reset meta-data in xmit function")
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20251118001619.242107-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit d373449d8e ("iommu/vt-d: Use the generic iommu page table")
changed the calculation of domain::aperture_end. Previously, it was
calculated as:
domain->domain.geometry.aperture_end =
__DOMAIN_MAX_ADDR(domain->gaw - 1);
where domain->gaw was limited to less than MGAW.
Currently, it is calculated purely based on the max level of the page
table that the hardware supports. This is incorrect as stated in Section
3.6 of the VT-d spec:
"Software using first-stage translation structures to translate an IO
Virtual Address (IOVA) must use canonical addresses. Additionally,
software must limit addresses to less than the minimum of MGAW and the
lower canonical address width implied by FSPM (i.e., 47-bit when FSPM
is 4-level and 56-bit when FSPM is 5-level)."
Restore the previous calculation method for domain::aperture_end to avoid
violating the spec. Incorrect aperture calculation causes GPU hangs
without generating VT-d faults on some Intel client platforms.
Fixes: d373449d8e ("iommu/vt-d: Use the generic iommu page table")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/r/4f15cf3b-6fad-4cd8-87e5-6d86c0082673@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Invalidation hint (ih) in the function 'qi_desc_iotlb' is initialized
to zero and never used. It is embedded in the 0th bit of the 'addr'
parameter. Get the correct 'ih' value from there.
Fixes: f701c9f36b ("iommu/vt-d: Factor out invalidation descriptor composition")
Signed-off-by: Aashish Sharma <aashish@aashishsharma.net>
Link: https://lore.kernel.org/r/20251009010903.1323979-1-aashish@aashishsharma.net
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
INTEL_IOMMU_FLOPPY_WA workaround was introduced to create direct mappings
for first 16MB for floppy devices as the floppy drivers were not using
dma apis. We need not do this direct map if floppy driver is not
enabled.
INTEL_IOMMU_FLOPPY_WA is generally not a good idea. Iommu will be
mapping pages in this address range while kernel would also be
allocating from this range(mostly on memory stress). A misbehaving
device using this domain will have access to the pages that the
kernel might be actively using. We noticed this while running a test
that was trying to figure out if any pages used by kernel is in iommu
page tables.
This patch reduces the scope of the above issue by disabling the
workaround when floppy driver is not enabled. But we would still need to
fix the floppy driver to use dma apis so that we need not do direct map
without reserving the pages. Or the other option is to reserve this
memory range in firmware so that kernel will not use the pages.
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Fixes: 49a0429e53 ("Intel IOMMU: Iommu floppy workaround")
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Link: https://lore.kernel.org/r/20251002161625.1155133-1-vineeth@bitbyteword.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
On S2MPG10 (and similar like S2MPG11), top-level interrupt status and
mask registers exist which need to be unmasked to get the PMIC
interrupts. This additional status doesn't seem to exist on other PMICs
in the S2MP* family, and the S2MPG10 driver is manually dealing with
masking and unmasking currently.
The correct approach here is to register this hierarchy as chained
interrupts, though, without any additional manual steps. Doing so will
also simplify addition of other, similar, PMICs (like S2MPG11) in the
future.
Update the driver to do just that.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251114-s2mpg10-chained-irq-v1-1-34ddfa49c4cd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
