Now that VMX encodes its own sequence for clearing CPU buffers, move
VM_CLEAR_CPU_BUFFERS into SVM to minimize the chances of KVM botching a
mitigation in the future, e.g. using VM_CLEAR_CPU_BUFFERS instead of
checking multiple mitigation flags.
No functional change intended.
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251113233746.1703361-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the handling of the MMIO Stale Data mitigation to clear CPU buffers
immediately prior to VM-Enter, i.e. in the same location that KVM emits a
VERW for unconditional (at runtime) clearing. Co-locating the code and
using a single ALTERNATIVES_2 makes it more obvious how VMX mitigates the
various vulnerabilities.
Deliberately order the alternatives as:
0. Do nothing
1. Clear if vCPU can access MMIO
2. Clear always
since the last alternative wins in ALTERNATIVES_2(), i.e. so that KVM will
honor the strictest mitigation (always clear CPU buffers) if multiple
mitigations are selected. E.g. even if the kernel chooses to mitigate
MMIO Stale Data via X86_FEATURE_CLEAR_CPU_BUF_VM_MMIO, another mitigation
may enable X86_FEATURE_CLEAR_CPU_BUF_VM, and that other thing needs to win.
Note, decoupling the MMIO mitigation from the L1TF mitigation also fixes
a mostly-benign flaw where KVM wouldn't do any clearing/flushing if the
L1TF mitigation is configured to conditionally flush the L1D, and the MMIO
mitigation but not any other "clear CPU buffers" mitigation is enabled.
For that specific scenario, KVM would skip clearing CPU buffers for the
MMIO mitigation even though the kernel requested a clear on every VM-Enter.
Note #2, the flaw goes back to the introduction of the MDS mitigation. The
MDS mitigation was inadvertently fixed by commit 43fb862de8 ("KVM/VMX:
Move VERW closer to VMentry for MDS mitigation"), but previous kernels
that flush CPU buffers in vmx_vcpu_enter_exit() are affected (though it's
unlikely the flaw is meaningfully exploitable even older kernels).
Fixes: 650b68a062 ("x86/kvm/vmx: Add MDS protection when L1D Flush is not active")
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://patch.msgid.link/20251113233746.1703361-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert the MMIO Stale Data mitigation tracking from a static branch into
an x86 feature flag so that it can be used via ALTERNATIVE_2 in KVM.
No functional change intended.
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://patch.msgid.link/20251113233746.1703361-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Decouple the use of ALTERNATIVE from the encoding of VERW to clear CPU
buffers so that KVM can use ALTERNATIVE_2 to handle "always clear buffers"
and "clear if guest can access host MMIO" in a single statement.
No functional change intended.
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://patch.msgid.link/20251113233746.1703361-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TSA mitigation:
d8010d4ba4 ("x86/bugs: Add a Transient Scheduler Attacks mitigation")
introduced VM_CLEAR_CPU_BUFFERS for guests on AMD CPUs. Currently on Intel
CLEAR_CPU_BUFFERS is being used for guests which has a much broader scope
(kernel->user also).
Make mitigations on Intel consistent with TSA. This would help handling the
guest-only mitigations better in future.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
[sean: make CLEAR_CPU_BUF_VM mutually exclusive with the MMIO mitigation]
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://patch.msgid.link/20251113233746.1703361-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When testing for VMLAUNCH vs. VMRESUME, use the copy of @flags from the
stack instead of first moving it to EBX, and then propagating
VMX_RUN_VMRESUME to RFLAGS.CF (because RBX is clobbered with the guest
value prior to the conditional branch to VMLAUNCH). Stashing information
in RFLAGS is gross, especially with the writer and reader being bifurcated
by yet more gnarly assembly code.
Opportunistically drop the SHIFT macros as they existed purely to allow
the VM-Enter flow to use Bit Test.
Suggested-by: Borislav Petkov <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://patch.msgid.link/20251113233746.1703361-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Amery Hung says:
====================
Replace BPF memory allocator with kmalloc_nolock() in local storage
This patchset tries to simplify bpf_local_storage.c by adopting
kmalloc_nolock(). This removes memory preallocation and reduces the
dependency of smap in bpf_selem_free() and bpf_local_storage_free().
The later will simplify a future refactor that replaces
local_storage->lock and b->lock [1].
RFC v1 tried to switch to kmalloc_nolock() unconditionally. However,
as there is substantial performance loss in socket local storage due to
1) defer_free() in kfree_nolock() and 2) no kfree_rcu() batching,
replacing kzalloc() is postponed until necessary improvements in mm
land.
Benchmark
./bench -p 1 local-storage-create --storage-type <socket,task> \
--batch-size <16,32,64>
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. For task local storage, switching from BPF memory
allocator to kmalloc_nolock() yields a small amount of improvement. For
socket local storage, it remains roughly the same as nothing has changed.
Socket local storage
memory alloc batch creation speed creation speed diff
--------------- ---- ------------------ ----
kzalloc 16 144.149 ± 0.642k/s 3.10 kmallocs/create
(before) 32 144.379 ± 1.070k/s 3.08 kmallocs/create
64 144.491 ± 0.818k/s 3.13 kmallocs/create
kzalloc 16 146.180 ± 1.403k/s 3.10 kmallocs/create +1.4%
(not changed) 32 146.245 ± 1.272k/s 3.10 kmallocs/create +1.3%
64 145.012 ± 1.545k/s 3.10 kmallocs/create +0.4%
Task local storage
memory alloc batch creation speed creation speed diff
--------------- ---- ------------------ ----
BPF memory 16 24.668 ± 0.121k/s 2.54 kmallocs/create
allocator 32 22.899 ± 0.097k/s 2.67 kmallocs/create
(before) 64 22.559 ± 0.076k/s 2.56 kmallocs/create
kmalloc_nolock 16 25.796 ± 0.059k/s 2.52 kmallocs/create +4.6%
(after) 32 23.412 ± 0.069k/s 2.50 kmallocs/create +2.2%
64 23.717 ± 0.108k/s 2.60 kmallocs/create +5.1%
[1] https://lore.kernel.org/bpf/20251002225356.1505480-1-ameryhung@gmail.com/
v1 -> v2
- Only replace BPF memory allocator with kmalloc_nolock()
Link: https://lore.kernel.org/bpf/20251112175939.2365295-1-ameryhung@gmail.com/
====================
Link: https://patch.msgid.link/20251114201329.3275875-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf memory allocator with kmalloc_nolock() to reduce memory
wastage due to preallocation.
In bpf_selem_free(), an selem now needs to wait for a RCU grace period
before being freed when reuse_now == true. Therefore, rcu_barrier()
should be always be called in bpf_local_storage_map_free().
In bpf_local_storage_free(), since smap->storage_ma is no longer needed
to return the memory, the function is now independent from smap.
Remove the outdated comment in bpf_local_storage_alloc(). We already
free selem after an RCU grace period in bpf_local_storage_update() when
bpf_local_storage_alloc() failed the cmpxchg since commit c0d63f3091
("bpf: Add bpf_selem_free()").
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251114201329.3275875-5-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Save the memory allocation method used for bpf_local_storage in the
struct explicitly so that we don't need to go through the hassle to
find out the info. When a later patch replaces BPF memory allocator
with kmalloc_noloc(), bpf_local_storage_free() will no longer need
smap->storage_ma to return the memory and completely remove the
dependency on smap in bpf_local_storage_free().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251114201329.3275875-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since selem already saves a pointer to smap, use it instead of an
additional argument in bpf_selem_free(). This requires moving the
SDATA(selem)->smap assignment from bpf_selem_link_map() to
bpf_selem_alloc() since bpf_selem_free() may be called without the
selem being linked to smap in bpf_local_storage_update().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251114201329.3275875-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit a96a44aba5 ("bpf: bpf_sk_storage: Fix invalid wait
context lockdep report"), {charge,uncharge}_mem are always true when
allocating a bpf_local_storage_elem or unlinking a bpf_local_storage_elem
from local storage, so drop these arguments. No functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251114201329.3275875-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xfstests' test-case generic/073 leaves HFS+ volume
in corrupted state:
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/073.full for details)
Ran: generic/073
Failures: generic/073
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
Invalid directory item count
(It should be 1 instead of 0)
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00004000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
The test is doing these steps on final phase:
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
So, we move file bar from testdir_1 into testdir_2 folder. It means that HFS+
logic decrements the number of entries in testdir_1 and increments number of
entries in testdir_2. Finally, we do fsync only for testdir_1 and foo but not
for testdir_2. As a result, this is the reason why fsck.hfsplus detects the
volume corruption afterwards.
This patch fixes the issue by means of adding the
hfsplus_cat_write_inode() call for old_dir and new_dir in
hfsplus_rename() after the successful ending of
hfsplus_rename_cat(). This method makes modification of in-core
inode objects for old_dir and new_dir but it doesn't save these
modifications in Catalog File's entries. It was expected that
hfsplus_write_inode() will save these modifications afterwards.
However, because generic/073 does fsync only for testdir_1 and foo
then testdir_2 modification hasn't beed saved into Catalog File's
entry and it was flushed without this modification. And it was
detected by fsck.hfsplus. Now, hfsplus_rename() stores in Catalog
File all modified entries and correct state of Catalog File will
be flushed during hfsplus_file_fsync() call. Finally, it makes
fsck.hfsplus happy.
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #93 SMP PREEMPT_DYNAMIC Wed Nov 12 14:37:49 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 32s ... 32s
Ran: generic/073
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251112232522.814038-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Split most of the rootid_owns_currentns() functionality
into a more generic rootid_owns_ns() function which
will be easier to write tests for.
Rename the functions and variables to make clear that
the ids being tested could be any uid.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
CC: Ryan Foster <foster.ryan.r@gmail.com>
CC: Christian Brauner <brauner@kernel.org>
---
v2: change the function parameter documentation to mollify the bot.
Move user_return_msrs allocation/free from vendor modules (kvm-intel.ko and
kvm-amd.ko) (un)loading time to kvm.ko's to make it less risky to access
user_return_msrs in kvm.ko. Tying the lifetime of user_return_msrs to
vendor modules makes every access to user_return_msrs prone to
use-after-free issues as vendor modules may be unloaded at any time.
Opportunistically turn the per-CPU variable into full structs, as there's
no practical difference between statically allocating the memory and
allocating it unconditionally during module_init().
Zero out kvm_nr_uret_msrs on vendor module exit to further minimize the
chances of consuming stale data, and WARN on vendor module load if KVM
thinks there are existing user-return MSRs.
Note! The user-return MSRs also need to be "destroyed" if
ops->hardware_setup() fails, as both SVM and VMX expect common KVM to
clean up (because common code, not vendor code, is responsible for
kvm_nr_uret_msrs).
Signed-off-by: Chao Gao <chao.gao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20251108013601.902918-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In commit 1e44bedbc9 ("block: unifying elevator change"), the
elevator_init_mq function was deleted, but its declaration in elevator.h
was overlooked. This patch fixes it.
Signed-off-by: Chengkaitao <chengkaitao@kylinos.cn>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Document the Kaanapali BWMONs, which have one instance per
cluster of BWMONv4.
Signed-off-by: Amir Vajid <amir.vajid@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-knp-bwmon-v1-1-56a9cdda7d72@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This new module provides numerical features useful for the kernel, such
as the `Integer` trait and the `Bounded` integer wrapper.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251108-bounded_ints-v4-3-c9342ac7ebd1@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `Bounded` integer wrapper type, which restricts the number of
bits allowed to represent of value.
This is useful to e.g. enforce guarantees when working with bitfields
that have an arbitrary number of bits.
Alongside this type, provide many `From` and `TryFrom` implementations
are to reduce friction when using with regular integer types. Proxy
implementations of common integer operations are also provided.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251108-bounded_ints-v4-2-c9342ac7ebd1@nvidia.com
[ Added intra-doc link. Fixed a few other nits. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
mock_get_event() uses an uninitialized local variable, nr_overflow, to
populate the overflow_err_count field. That results in incorrect
overflow_err_count values in mocked cxl_overflow trace events, such as
this case where the records are reported as 0 and should be non-zero:
[] cxl_overflow: memdev=mem7 host=cxl_mem.6 serial=7: log=Failure : 0 records from 1763228189130895685 to 1763228193130896180
Fix by using log->nr_overflow and remove the unused local variable.
A follow-up change was considered in cxl_mem_get_records_log() to
confirm that the overflow_err_count is non-zero when the overflow flag
is set [1]. Since the driver has no functional dependency on this
constraint, and a device that violates this specific requirement does
not cause incorrect driver behavior, no validation check is added.
[1] CXL 3.2, Table 8-65 Get Event Records Output Payload
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013036.1713313-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 364ee9f326 ("cxl/test: Enhance event testing") changed the
loop iterator in mock_get_event() from a static constant,
CXL_TEST_EVENT_CNT, to a dynamic global variable, ret_limit. The
intent was to vary the number of events returned per call to simulate
events occurring while logs are being read.
However, ret_limit is modified without synchronization. When multiple
threads call mock_get_event() concurrently, one thread may read
ret_limit, another thread may increment it, and the first thread's
loop condition and size calculation see and use the updated value.
This is visible during cxl_test module load when all memdevs are
initializing simultaneously, which includes getting event records. It
is not tied to the cxl-events.sh unit test specifically, as that
operates on a single memdev.
While no actual harm results (the buffer is always large enough and
the record count fields correctly reflect what was written), this is
a correctness issue. The race creates an inconsistent state within
mock_get_event() and adding variability based on a race appears
unintended.
Make ret_limit a local variable populated from an atomic counter. Each
call gets a stable value that won't change during execution. That
preserves the intended behavior of varying the return counts across
calls while eliminating the race condition.
This implementation uses "+ 1" to produce the full range of 1 to
CXL_TEST_EVENT_RET_MAX (4) records. Previously only 1, 2, 3 were
produced.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013819.1713780-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The previous code initialized the 'reg' value with specific bus-width
values (BUS_WIDTH_2_BIT and BUS_WIDTH_4_BIT), which introduces ambiguity.
Replace them with BUS_WIDTH_MASK to express the intention clearly.
Fixes: de16c322ee ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://patch.msgid.link/20251117090559.78288-1-looong.bin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
pinctrl/mediatek/pinctrl-airoha.c:2064:41: error: variable 'an7583_pinctrl_drive_e2_conf' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
2064 | static const struct airoha_pinctrl_conf an7583_pinctrl_drive_e2_conf[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Due to a typo, an7583_pinctrl_drive_e2_conf is only used within
ARRAY_SIZE() (hence no instance of -Wunused-variable), which is
evaluated at compile time, so it will not be needed in the final object
file.
Fix the .confs assignment for AIROHA_PINCTRL_CONFS_DRIVE_E2 in
an7583_pinctrl_match_data to clear up the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2142
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The blamed commit made the following changes:
-#define PINCTRL_FUNC_DESC(id)...
- .desc = PINCTRL_PINFUNCTION(#id, ...
+#define PINCTRL_FUNC_DESC(id, table)...
+ .desc = PINCTRL_PINFUNCTION(#id, ...
- PINCTRL_FUNC_DESC(pon)...
+ PINCTRL_FUNC_DESC("pon", pon)...
It's clear that the id of funcs doesn't match the definition.
Remove redundant #string from the definition to fix this issue:
pinctrl-airoha ...: invalid function mdio in map table
Fixes: 4043b0c45f ("pinctrl: airoha: generalize pins/group/function/confs handling")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The connect4_prog and bpf_iter_setsockopt tests duplicate the same
open-coded TCP congestion control string comparison logic. Since
bpf_strncmp() provides the same functionality, use it instead to
avoid repeated open-coded loops.
This change applies only to functional BPF tests and does not affect
the verifier performance benchmarks (veristat.cfg). No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-5-hoyeon.lee@suse.com
Some BPF selftests contain identical copies of the min(), max(),
before(), and after() helpers. These repeated snippets are the same
across the tests and do not need to be defined separately.
Move these helpers into bpf_tracing_net.h so they can be shared by
TCP related BPF programs. This removes repeated code and keeps the
helpers in a single place.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-4-hoyeon.lee@suse.com
s32_pmx_gpio_request_enable() does not initialize the newly-allocated
gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs.
This could result in a linked list corruption.
Initialize the new list_head with INIT_LIST_HEAD() to fix this.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its
fields are initialized. Notably, num_custom_params is used in
pinconf_generic_parse_dt_config(), resulting in intermittent allocation
errors, such as the following splat when probing i2c-imx:
WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300
[...]
Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT)
[...]
Call trace:
__alloc_pages_noprof+0x290/0x300 (P)
___kmalloc_large_node+0x84/0x168
__kmalloc_large_node_noprof+0x34/0x120
__kmalloc_noprof+0x2ac/0x378
pinconf_generic_parse_dt_config+0x68/0x1a0
s32_dt_node_to_map+0x104/0x248
dt_to_map_one_config+0x154/0x1d8
pinctrl_dt_to_map+0x12c/0x280
create_pinctrl+0x6c/0x270
pinctrl_get+0xc0/0x170
devm_pinctrl_get+0x50/0xa0
pinctrl_bind_pins+0x60/0x2a0
really_probe+0x60/0x3a0
[...]
__platform_driver_register+0x2c/0x40
i2c_adap_imx_init+0x28/0xff8 [i2c_imx]
[...]
This results in later parse failures that can cause issues in dependent
drivers:
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
[...]
pca953x 0-0022: failed writing register: -6
i2c i2c-0: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
i2c i2c-1: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
i2c i2c-2: IMX I2C adapter registered
Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of
devm_kmalloc() in s32_pinctrl_probe(), which sets the previously
uninitialized fields to zero.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Tested-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 733b57f262 ("cxl/pci: Early setup RCH dport component registers from RCRB")
is not necessary under mocking tests.
[ dj: Fixup commit representation flagged by checkpatch. ]
[ dj: Ammend subject line to indicate which function. ]
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20251118182202.2083244-1-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
[ T93022] ------------[ cut here ]------------
[ T93022] WARNING: CPU: 10 PID: 93022 at
ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] Call Trace:
[ T93022] <TASK>
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? __warn.cold+0xb0/0x10e
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? report_bug+0xd8/0x150
[ T93022] ? handle_bug+0xe9/0x110
[ T93022] ? exc_invalid_op+0x17/0x70
[ T93022] ? asm_exc_invalid_op+0x1a/0x20
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] pci_device_remove+0x42/0xb0
[ T93022] device_release_driver_internal+0x19f/0x200
[ T93022] driver_detach+0x48/0x90
[ T93022] bus_remove_driver+0x70/0xf0
[ T93022] pci_unregister_driver+0x42/0xb0
[ T93022] ice_module_exit+0x10/0xdb0 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
...
[ T93022] ---[ end trace 0000000000000000 ]---
[ T93022] ice: module unloaded
Fixes: e800654e85 ("ice: Use ice_adapter for PTP shared data instead of auxdev")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The router link clock branches also feature some reset logic, which is
required to properly power sequence the hardware for DP tunneling over
USB4.
Describe these missing resets.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-topic-usb4_x1e_dispcc-v1-2-14c68d842c71@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The router link clock branches also feature some reset logic, which is
required to properly power sequence the hardware for DP tunneling over
USB4.
Describe these missing resets.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-topic-usb4_x1e_dispcc-v1-1-14c68d842c71@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to be able
to request for videocc clocks on SM8750 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-5-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some clock branches require inverted logic for memory gating, where
disabling the memory involves setting a bit and enabling it involves
clearing the same bit. This behavior differs from the standard approach
memory branch clocks ops where enabling typically sets the bit.
The mem_enable_invert to allow conditional handling of these sequences
of the inverted control logic for memory operations required on those
memory clock branches.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-3-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Freezing the request queue from inside sysfs store callbacks may cause a
deadlock in combination with the dm-multipath driver and the
queue_if_no_path option. Additionally, freezing the request queue slows
down system boot on systems where sysfs attributes are set synchronously.
Fix this by removing the blk_mq_freeze_queue() / blk_mq_unfreeze_queue()
calls from the store callbacks that do not strictly need these callbacks.
Add the __data_racy annotation to request_queue.rq_timeout to suppress
KCSAN data race reports about the rq_timeout reads.
This patch may cause a small delay in applying the new settings.
For all the attributes affected by this patch, I/O will complete
correctly whether the old or the new value of the attribute is used.
This patch affects the following sysfs attributes:
* io_poll_delay
* io_timeout
* nomerges
* read_ahead_kb
* rq_affinity
Here is an example of a deadlock triggered by running test srp/002
if this patch is not applied:
task:multipathd
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
schedule_preempt_disabled+0x1c/0x30
__mutex_lock+0xb89/0x1650
mutex_lock_nested+0x1f/0x30
dm_table_set_restrictions+0x823/0xdf0
__bind+0x166/0x590
dm_swap_table+0x2a7/0x490
do_resume+0x1b1/0x610
dev_suspend+0x55/0x1a0
ctl_ioctl+0x3a5/0x7e0
dm_ctl_ioctl+0x12/0x20
__x64_sys_ioctl+0x127/0x1a0
x64_sys_call+0xe2b/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
task:(udev-worker)
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
blk_mq_freeze_queue_wait+0xf2/0x140
blk_mq_freeze_queue_nomemsave+0x23/0x30
queue_ra_store+0x14e/0x290
queue_attr_store+0x23e/0x2c0
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3b2/0x630
vfs_write+0x4fd/0x1390
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x276/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
Fixes: af28141498 ("block: freeze the queue in queue_attr_store")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some but not all .ra_pages changes happen while block layer I/O is paused
with blk_mq_freeze_queue(). Filesystems may read .ra_pages even while
block layer I/O is paused, e.g. from inside their .fadvise callback.
Annotating all .ra_pages reads with READ_ONCE() would be cumbersome.
Hence, add the __data_racy annotatation to the .ra_pages member
variable.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both used to go through Tony's branches, so lets keep things together.
This was missed at the time when Co-Maintainers were added.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patch.msgid.link/20240915195321.1071967-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20251118192652.316198-1-khilman@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmkZpf8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgff6CACnCa3tpWDB/nLRQNd8iBWlzk323yA94DB2
k2I9ZoSvOfMZ2KWbpfEk2ODW40jSMWEZEIJg2SDX7yagfmH1ZNtNuTi3Q48HcDmv
z79Pxqt512/umysRjPrr5rXBRywG7WWybjbYYpeLLdkvYQg/jfoiLeB7sHGUvRMV
aFRp7SIaEKVWTx2BptcrUmu6HSO6tVMRuAHB+7HRTpIU71SXULbnva4qOsmaGpDx
dNNX8XKiYzHdpx6Ip9MbWCDjYnysJiEo+cldwrRmHzRv4n56vCbA/oXrNB9v03I4
TFqQvSPAe+FA64gmqUaKx1jeUL54tf8L/GldDn7+n3xDjB59TE/E
=rVu+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KB+O
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Regulator/supply fixes for a number of boards, removed too fast
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
* tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
arm64: dts: rockchip: Make RK3588 GPU OPP table naming less generic
arm64: dts: rockchip: Drop 'rockchip,grf' prop from tsadc on rk3328
arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576
arm64: dts: rockchip: Fix PCIe power enable pin for BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Set correct pinctrl for I2S1 8ch TX on odroid-m1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A new resource group is intended to be created with sane defaults. For a cache
resource this means all cache portions the new group could possibly allocate
into. This includes unused cache portions and shareable cache portions used by
other groups and hardware.
New resource group creation does not take sparse masks into account. After
determining the bitmask reflecting the new group's possible allocations the
bitmask is forced to be contiguous even if the system supports sparse masks.
For example, a new group could by default allocate into a large portion of
cache represented by 0xff0f, but it is instead created with a mask of 0xf.
Do not force a contiguous allocation range if the system supports sparse masks.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/abbbb008bc09d982d715e79d3b885c10f92c64e0.1763426240.git.reinette.chatre@intel.com
Retrieve the GOP device's EDID information in the kernel's boot
parameters. Makes the data avaialble to kernel graphics code and
drives, such as efidrm.
With efidrm, the EDID is now also available to user-space compositors
via standard DRM interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
