The ECPRI clock controller’s mem_ops clocks used the mem_enable_ack_mask
directly for both setting and polling.
Add the newly introduced 'mem_enable_mask' to the memory control branch
clocks of ECPRI clock controller to align to the new mem_ops handling.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-2-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce mem_enable_mask and mem_enable_invert in clk_mem_branch to
describe memory gating implementations that use a separate mask and/or
inverted enable logic. This documents hardware behavior in data instead
of code and will be used by upcoming platform descriptions.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-1-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add offset for display subsystem reset in multimedia clock controller
block, which is necessary to reset display when there is some
configuration in display controller left by previous stock (Android)
bootloader to provide continuous splash functionaluty.
Before 6.17 power domains were turned off for long enough to clear
registers, now this is not the case and a proper reset is needed to
have functioning display.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-2-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add definition for display subsystem reset control, so display
driver can reset display controller properly, clearing any
configuration left there by bootloader. Since 6.17 after
PM domains rework it became necessary for display to function.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-1-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
scripts/lib was always a bit of an awkward place for Python libraries; give
them a proper home under tools/lib/python. Put the modules from
tools/docs/lib there for good measure.
The second patch ties them into a single package namespace. It would be
more aesthetically pleasing to add a kernel layer, so we could say:
from kernel.kdoc import kdoc_parser
...and have the kernel-specific stuff clearly marked, but that means adding
an empty directory in the hierarchy, which isn't as pleasing.
There are some other "Python library" directories hidden in the kernel
tree; we may eventually want to encourage them to move as well.
Now that we have tools/lib/python for our Python modules, turn them into
proper packages with a single namespace so that everything can just use
tools/lib/python in sys.path. No functional change.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251110220430.726665-3-corbet@lwn.net>
"scripts/lib" was always a bit of an awkward place for Python modules. We
already have tools/lib; create a tools/lib/python, move the libraries
there, and update the users accordingly.
While at it, move the contents of tools/docs/lib. Rather than make another
directory, just put these documentation-oriented modules under "kdoc".
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251110220430.726665-2-corbet@lwn.net>
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c6 ("mm/huge_memory: initialise the tags of the huge zero folio")
Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-and-tested-by: David Wang <00107082@163.com>
Reported-and-tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the kernel build options abbreviations to the .txt file so that
they are together instead of one having to go hunt them in the .rst
file.
Tweak the formatting so that the inclusion of kernel-parameters.txt
still keeps the whole thing somewhat presentable in the html output too.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251112114641.8230-1-bp@kernel.org>
Replace "vantage" with "advantage" in the description of userspace API
cross-references.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251115114233.32239-1-ankitkhushwaha.linux@gmail.com>
Instead of checking that the signal is analog before calling the
HWSS disable_audio_stream() function to disable audio, move
the check inside the HWSS function.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-5-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match pre-existing patterns in the DC code base.
Instead of returning early from the construct_phy() function,
add a label at the end and use goto to jump there.
Additionally, respect the DC logger and let it log the function
even when it returns early.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-4-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the detect_link_and_local_sink() function, do not modify the
EDID capabilities of the display based on the connector. Instead,
respect the analog flag better and when the analog flag is set,
check that the connector indeed supports analog displays.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-3-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following warning that some users are reporting
with some kernel configurations:
"positional initialization of field in 'struct' declared
with 'designated_init' attribute"
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20251113163348.137315-2-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert McClinton <rbmccav@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change comments from kernel-doc style "/**" to normal C comments
"/*" since the comments are not in kernel-doc format.
This fixes around 39 kernel-doc warnings like this one:
drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c:1322: warning:
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511062036.Ry8Z2APc-lkp@intel.com/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add interface to capture expected HW state from SW state
- Add panel Replay capability detection, DPCD reading, and enablement logic
- Re-check seamless boot enablement on subsequent dc_commit_streams
- Improve DPCD link capability retrieval with increased retries and per-retry delays
- Add HPD filter for HDMI
- Add pipe topology history tracking to DC
- Fix MST initialization on resume when switching from SST to MST during suspend
- Fix double cursor on DCN20 & DCN30 in non-native scaling
- Check DCCG_AUDIO_DTO2 register mask before access
- Fix pbn to kbps conversion
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Ignore Coverity false positive analysis in the dmub_cmd.h
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Check DCCG_AUDIO_DTO2 register mask exist before access.
Also, add a existing DIO_CLOCK_control register for later use.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Check that the stream exists to add link->local_sink null pointer access
protection.
Reviewed-by: Harold Sun <harold.sun@amd.com>
Reviewed-by: Ethan Cheung <ethan.cheung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to check pipe topology update history through a
dump.
[How]
Add a topology history structure to dc with snapshots of the most recent
pipe topology updates.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors perform rapid “autoscan” HPD re‑assertions right after a
disconnect or powersaving mode enablement. These appear as a quick
disconnect→reconnect with an identical EDID. Since Linux has no HDMI
hotplug detection (HPD) filter, these quick reconnects are seen as hotplug
events, which can unintentionally wake a system with DPMS off.
An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Such 'fake reconnects' are considered when the interval between a
disconnect and a connect is within 1500ms (experimentally chosen using
several monitors), and the two connections have the same EDID.
[How]
Implement a time-based debounce mechanism:
1. On HDMI disconnect detection, instead of immediately processing the
HPD event, save the current sink and schedule delayed work (default 1500ms)
2. If another HDMI disconnect HPD event arrives during the debounce period,
it reschedules the pending work, ensuring only the final state is processed.
3. When the debounce timer expires, re-detect the display and compare the
new sink with the cached one using EDID comparison.
4. If sinks match (same EDID), this was a spontaneous HPD toggle:
- Update connector state internally
- Skip hotplug event to prevent desktop rearrangement
If sinks differ, this was a real display change:
- Process normally with the hotplug event
The debounce delay is configurable via module parameter
'hdmi_hpd_debounce_delay_ms'.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Empirical measurement of some monitors that fail to read EDID while
booting shows that the number of retries with a 30ms delay between
tries is as high as 16.
[How]
Increase number of retries to 20.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the seamless boot feature has already been enabled, and
dc_commit_streams is called again before receiving a flip, the
driver will adjust the engine clock without turning off the screen,
which will cause garbage to occur. However, in reality, the Pixel
Clock from the first dc_commit_streams and the second dc_commit_streams
are different.
[How]
If the apply seamless boot flag in the previous stream has not been
cleared, and dc_commit_streams is received again, we need to recheck
whether seamless boot should be disabled
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Read Panel replay caps from DPCD when retrieving link capability
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
1.Add flow to enable and configure panel replay enablement and
configuration
2.Add registry key for enable option
3.Add replay version check to be compatible with freesync replay
4.Add AC/DC switch function to notify ac/dc change.
5.Add flow in set event function to check and decide Replay
enable/disable
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
For supporting VESA PR, add flow to determine the support capability
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To debug certain issues, such as underflow, it is common practice to
dump the HW state of all registers for analysis. The first thing to
check with the dump is to ensure all values are programmed as expected
according to SW state.
[How]
Add interface to DC to capture expected HW register values based on SW
state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move MMU fault handler for each generation to adreno function list. This
will help to use common code for mmu pagefault handler registration between
a6x/a7x and a8x layer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689007/
Message-ID: <20251118-kaana-gpu-support-v4-8-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move the gbif halt fn to adreno_gpu_func so that we can call different
implementation from common code. This will come handy when we implement
A8x layer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689005/
Message-ID: <20251118-kaana-gpu-support-v4-7-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In A6x family (which is a pretty big one), there are separate
adreno_func definitions for each sub-generations. To streamline the
identification of the correct struct for a gpu, move it to the
catalogue and move the gpu_init routine to struct adreno_gpu_funcs.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689003/
Message-ID: <20251118-kaana-gpu-support-v4-6-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Newer gen's introduce pipe enums which do not exist on older gens, but
the numeric values do not conflict. IOW, they are backward compatible.
So move its definition to adreno_common.xml.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689001/
Message-ID: <20251118-kaana-gpu-support-v4-5-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Crashdec doesn't require SCRATCH registers anymore for a6xx and newer
architectures. So skip dumping them during recovery.
Suggested-by: Rob Clark <rob.clark@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689000/
Message-ID: <20251118-kaana-gpu-support-v4-4-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Correct the register offset and enable this workaround for all A7x
and newer GPUs to match the recommendation. Also, downstream does this
w/a after moving the fence to allow mode. So do the same.
Fixes: dbfbb376b5 ("drm/msm/a6xx: Add A621 support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688997/
Message-ID: <20251118-kaana-gpu-support-v4-3-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As per the recommendation, A7x and newer GPUs should flush the LRZ cache
before switching the pagetable. Update a6xx_set_pagetable() to do this.
While we are at it, sync both BV and BR before issuing a
CP_RESET_CONTEXT_STATE command, to match the downstream sequence.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688995/
Message-ID: <20251118-kaana-gpu-support-v4-2-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register
range. So, use gmu_write() routines to write to this register.
Fixes: 1707add815 ("drm/msm/a6xx: Add a6xx gpu state")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688993/
Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Based on mesa commit 3f70b0578402 ("freedreno/registers: Fix encoding
fields in 64b registers"), but with some fixes to not skip emitting
interrupt enum values.
v2: Don't append "ull" to 32b reg MASK defines, to avoid printf format
conversion warnings all over the place
Co-developed-by: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689141/
Message-ID: <20251118152952.226510-1-robin.clark@oss.qualcomm.com>
Create a new fuse inode flag that indicates that the kernel should
implement various local filesystem behaviors instead of passing vfs
commands straight through to the fuse server and expecting the server to
do all the work. For example, this means that we'll use the kernel to
transform some ACL updates into mode changes, and later to do
enforcement of the immutable and append iflags.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add suspend/resume hooks which assert/deassert the reset signals, along
with forcing runtime suspend/resume. This allows using the driver in
scenarios where the resume is done with the help of bootloader and the
bootloader disables the SDHI clocks, resets, IRQs before passing execution
to Linux.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() require __maybe_unused
or #ifdefs protection against unused function warnings. The usage of
pm_ptr() and SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() allows the compiler to
see the functions, thus suppressing the warning. Drop the #ifdefs.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Deassert the reset signal of the SDHI controller during probe to avoid
relying on the previous bootloaders. Without deasserting the reset signal,
the SDHI controller will not function.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Common boolean properties need to be only allowed in the binding
(":true"), because their type is already defined by core DT schema.
Simplify dma-coherent property to match common syntax.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The meson-mx-sdio (and mmc core) only support one MMC/SD/SDIO slot
(device) per host. Thus having multiple mmc-slot nodes (one for the up
to three supported slots with one device each on the meson-mx-sdio
hardware) can be problematic.
Allow specifying all slots (with their respective device) connected to
the meson-mx-sdio hardware in device-tree, while making sure that only
the enabled one(s) are actually considered by the driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Keep the second line with arguments for dma_unmap_sg() aligned.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
