To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic.
Currently, dump_backtrace() walks the stack of the current task or a
blocked task by calling stact_backtrace() and iterating unwind steps
using unwind_frame(). This can be written more simply in terms of
arch_stack_walk(), considering three distinct cases:
1) When unwinding a blocked task, start_backtrace() is called with the
blocked task's saved PC and FP, and the unwind proceeds immediately
from this point without skipping any entries. This is functionally
equivalent to calling arch_stack_walk() with the blocked task, which
will start with the task's saved PC and FP.
There is no functional change to this case.
2) When unwinding the current task without regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind proceeds immediately without
skipping. This is *almost* functionally equivalent to calling
arch_stack_walk() for the current task, which will start with its
caller (i.e. an offset into dump_backtrace()) as the PC, and the
callers frame record as the next frame.
The only difference being that dump_backtrace() will be reported with
an offset (which is strictly more correct than currently). Otherwise
there is no functional cahnge to this case.
3) When unwinding the current task with regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind is performed silently until the
next frame is the frame pointed to by regs->fp. Reporting starts
from regs->pc and continues from the frame in regs->fp.
Historically, this pre-unwind was necessary to correctly record
return addresses rewritten by the ftrace graph calller, but this is
no longer necessary as these are now recovered using the FP since
commit:
c6d3cd32fd ("arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR")
This pre-unwind is not necessary to recover return addresses
rewritten by kretprobes, which historically were not recovered, and
are now recovered using the FP since commit:
cd9bc2c925 ("arm64: Recover kretprobe modified return address in stacktrace")
Thus, this is functionally equivalent to calling arch_stack_walk()
with the current task and regs, which will start with regs->pc as the
PC and regs->fp as the next frame, without a pre-unwind.
This patch makes dump_backtrace() use arch_stack_walk(). This simplifies
dump_backtrace() and will permit subsequent changes to the unwind code.
Aside from the improved reporting when unwinding current without regs,
there should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
[Mark: elaborate commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently profile_pc() walks the stack of an interrupted context by
calling start_backtrace() with the context's PC and FP, and iterating
unwind steps using walk_stackframe(). This is functionally equivalent to
calling arch_stack_walk() with the interrupted context's pt_regs, which
will start with the PC and FP from the regs.
Make profile_pc() use arch_stack_walk(). This simplifies profile_pc(),
and in future will alow us to make walk_stackframe() private to
stacktrace.c.
At the same time, we remove the early return for when regs->pc is not in
lock functions, as this will be handled by the first call to the
profile_pc_cb() callback.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: remove early return, elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently return_address() walks the stack of the current task by
calling start_backtrace() with return_address as the PC and the frame
pointer of return_address() as the next frame, iterating unwind steps
using walk_stackframe(). This is functionally equivalent to calling
arch_stack_walk() for the current stack, which will start from its
caller (i.e. return_address()) as the PC and it's caller's frame record
as the next frame.
Make return_address() use arch_stackwalk(). This simplifies
return_address(), and in future will alow us to make walk_stackframe()
private to stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently, __get_wchan() walks the stack of a blocked task by calling
start_backtrace() with the task's saved PC and FP values, and iterating
unwind steps using unwind_frame(). The initialization is functionally
equivalent to calling arch_stack_walk() with the blocked task, which
will start with the task's saved PC and FP values.
Currently __get_wchan() always performs an initial unwind step, which
will stkip __switch_to(), but as this is now marked as a __sched
function, this no longer needs special handling and will be skipped in
the same way as other sched functions.
Make __get_wchan() use arch_stack_walk(). This simplifies __get_wchan(),
and in future will alow us to make unwind_frame() private to
stacktrace.c. At the same time, we can simplify the try_get_task_stack()
check and avoid the unnecessary `stack_page` variable.
The change to the skipping logic means we may terminate one frame
earlier than previously where there are an excessive number of sched
functions in the trace, but this isn't seen in practice, and wchan is
best-effort anyway, so this should not be a problem.
Other than the above, there should be no functional change as a result
of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
[Mark: rebase atop wchan changes, elaborate commit message, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic outside of stacktrace.c.
Currently perf_callchain_kernel() walks the stack of an interrupted
context by calling start_backtrace() with the context's PC and FP, and
iterating unwind steps using walk_stackframe(). This is functionally
equivalent to calling arch_stack_walk() with the interrupted context's
pt_regs, which will start with the PC and FP from the regs.
Make perf_callchain_kernel() use arch_stack_walk(). This simplifies
perf_callchain_kernel(), and in future will alow us to make
walk_stackframe() private to stacktrace.c.
At the same time, we update the callchain_trace() callback to check the
return value of perf_callchain_store(), which indicates whether there is
space for any further entries. When a non-zero value is returned,
further calls will be ignored, and are redundant, so we can stop the
unwind at this point.
We also remove the stale and confusing comment for callchain_trace.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[Mark: elaborate commit message, remove comment, fix includes]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Unlike most architectures (and only in keeping with powerpc), arm64 has
a non __sched() function on the path to our cpu_switch_to() assembly
function.
It is expected that for a blocked task, in_sched_functions() can be used
to skip all functions between the raw context switch assembly and the
scheduler functions that call into __switch_to(). This is the behaviour
expected by stack_trace_consume_entry_nosched(), and the behaviour we'd
like to have such that we an simplify arm64's __get_wchan()
implementation to use arch_stack_walk().
This patch mark's arm64's __switch_to as __sched. This *will not* change
the behaviour of arm64's current __get_wchan() implementation, which
always performs an initial unwind step which skips __switch_to(). This
*will* change the behaviour of stack_trace_consume_entry_nosched() and
stack_trace_save_tsk() to match their expected behaviour on blocked
tasks, skipping all scheduler-internal functions including
__switch_to().
Other than the above, there should be no functional change as a result
of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We added stack_info::kr_cur in commit:
cd9bc2c925 ("arm64: Recover kretprobe modified return address in stacktrace")
... but didn't add anything in the corresponding comment block.
For consistency, add a corresponding comment.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Make arch_stack_walk() available for ARCH_STACKWALK architectures
without it being entangled in STACKTRACE.
Link: https://lore.kernel.org/lkml/20211022152104.356586621@infradead.org/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[Mark: rebase, drop unnecessary arm change]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-----BEGIN PGP SIGNATURE-----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=QG5U
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build fix from Thomas Gleixner:
"A single fix for a missing __init annotation of prepare_command_line()"
* tag 'x86-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Mark prepare_command_line() __init
NTFS_RW and VMXNET3 require a page size smaller than 64kB. Add generic
Kconfig option for use outside architecture code to avoid architecture
specific Kconfig options in that code.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix KVM using a Power9 instruction on earlier CPUs, which could lead to the host SLB being
incorrectly invalidated and a subsequent host crash.
Fix kernel hardlockup on vmap stack overflow on 32-bit.
Thanks to: Christophe Leroy, Nicholas Piggin, Fabiano Rosas.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmGh96MTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgGHDEACu37n/NLFp3qzHyrk4fHN6sUQ0wGsE
oroKeIrTP2+JPsoEDd6Jd9oQmqmVLmVTp4y/Lu6AAJbK4p1He1iPIxIbZn12NwqY
/siCihV76PXR8748g1j8r3a3UYDmmvmllAIf9JdAn2I4kKPE3J37/1NEGSqZyJ80
HzkheTczUweANhVuG1RDh3WvnAKMuOvtrT/YgetVILig23oiUORQkZH5wcpScaCN
qShnqKSuRt8HWaF3uRh6D0sf4o0BWfZ6Pjyi7R/T7s2dQVgz0uCtu4MuyGirx/0J
uU3yDEZD24y6doyi6HUgAFGeGYqJXky2XDOMrgV6CNGFty9HFp6GgN6gtX353pZa
9Xplw4kg9UJwGcyk1BvgdQBHdc83y5zmr8c2PfhgiP/5rfEyCTYtHgZKUu5LLW8Y
ECYkSNnlAT68SancCmiXgos1heIiwB7922cRWJANfGEjItNBFldtb2QZio2bWOUX
g4gZ8HN2P0OmOxV1nnNkmIe+ZKLeHPN2N/FR7pUdkFk2+BLWFx+SbrceCCicwMF4
CUUzll8FMFmVAGjFivG/axzqlDWMY5lrDsFZamaWN3VQEo7TwL6l8/cDcFZF4QBq
viLWbi7sfQm6M3tZXFS465sG4SpUQ4lI8PKptuz5DMdr6WKisTLR7OF0klxsEwZj
ZcT8a/wzUIZ53w==
=MBp+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix KVM using a Power9 instruction on earlier CPUs, which could lead
to the host SLB being incorrectly invalidated and a subsequent host
crash.
Fix kernel hardlockup on vmap stack overflow on 32-bit.
Thanks to Christophe Leroy, Nicholas Piggin, and Fabiano Rosas"
* tag 'powerpc-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix hardlockup on vmap stack overflow
KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB
The macro is unused after commit 00ecd54013 so it can be removed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 00ecd54013 ("iommu/vt-d: Clean up unused PASID updating functions")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211123105507.7654-2-joro@8bytes.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYaD8mwAKCRCAXGG7T9hj
vspAAPwLA5SUorji33PTetwmcpLcoRJ3Q4HAPz+bOPdm9iL/PgD/V8MtxFrFebBs
AJoa+GmBarUNn7XCqKnCcA64iXhrpQw=
=6GY3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Kconfig fix to make it possible to control building of the privcmd
driver
- three fixes for issues identified by the kernel test robot
- a five-patch series to simplify timeout handling for Xen PV driver
initialization
- two patches to fix error paths in xenstore/xenbus driver
initialization
* tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: make HYPERVISOR_set_debugreg() always_inline
xen: make HYPERVISOR_get_debugreg() always_inline
xen: detect uninitialized xenbus in xenbus_init
xen: flag xen_snd_front to be not essential for system boot
xen: flag pvcalls-front to be not essential for system boot
xen: flag hvc_xen to be not essential for system boot
xen: flag xen_drm_front to be not essential for system boot
xen: add "not_essential" flag to struct xenbus_driver
xen/pvh: add missing prototype to header
xen: don't continue xenstore initialization in case of errors
xen/privcmd: make option visible in Kconfig
- Evaluate uaccess macro arguments outside of the critical section
- Tighten up VM_BUG_ON() in pmd_populate_kernel() to avoid false positive
- Fix ftrace stack unwinding using HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmGgqs4QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBKAB/4r/+K4xjuP4x1CX7Tv3VRkwLvkEiHYdm64
Ljsf0e//AnezlWRJsR+MOKlp81bLcJu7Y3U+jkDYCjbJEWWwANC6/3dGmtmW4XPc
hgQtb+ngS/HjyVD83epSgtAo85L6xfOgExThYTWmiQGpwsyBnMAD21MQmPtllHjX
xvifkIYzLIUdw4orQv+RyY262kI26y2ugj4BdZ4KSzUiCJWv3T+Tywmf8q8S6a5W
s491oB/63bR24bytL3sni7ltDdg42/24arCoYOJQ8WCbvFDY9seCH0OX8jhbZzR/
pcn61SsaPF58MKcccQjjRnWv1rvy9sXGci1QoxWjmuC2CviJxovZ
=uDnd
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes.
The main one is a fix to the way in which we evaluate the macro
arguments to our uaccess routines, which we _think_ might be the root
cause behind some unkillable tasks we've seen in the Android arm64 CI
farm (testing is ongoing). In any case, it's worth fixing.
Other than that, we've toned down an over-zealous VM_BUG_ON() and
fixed ftrace stack unwinding in a bunch of cases.
Summary:
- Evaluate uaccess macro arguments outside of the critical section
- Tighten up VM_BUG_ON() in pmd_populate_kernel() to avoid false positive
- Fix ftrace stack unwinding using HAVE_FUNCTION_GRAPH_RET_ADDR_PTR"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: uaccess: avoid blocking within critical sections
arm64: mm: Fix VM_BUG_ON(mm != &init_mm) for trans_pgd
arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
André Almeida sends an update for the newly added futex_waitv
syscall that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones.
-----BEGIN PGP SIGNATURE-----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=Vy2A
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic syscall table update from Arnd Bergmann:
"André Almeida sends an update for the newly added futex_waitv syscall
that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones"
* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
futex: Wireup futex_waitv syscall
There are only a few devicetree fixes this time:
- one outdated devicetree property that slipped into the
newly added ExynosAutov9 support
- three changes to Broadcom SoCs that had incorrect
number values for interrupts or irqchips.
In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs,
while Taichi Sugaya and Takao Orito take ownership of the Socionext
Milbeaut platform.
All other changes are for SoC specific drivers, fixing:
- A missing NULL pointer check in the mediatek memory driver
- An integer overflow issue in the Arm smccc firwmare interface
- A false-positive fortify-source check
- Error handling fixes for optee and smci
- Incorrect message format in one SCMI call
-----BEGIN PGP SIGNATURE-----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=veH6
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a few devicetree fixes this time:
- one outdated devicetree property that slipped into the newly added
ExynosAutov9 support
- three changes to Broadcom SoCs that had incorrect number values for
interrupts or irqchips.
In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs,
while Taichi Sugaya and Takao Orito take ownership of the Socionext
Milbeaut platform.
All other changes are for SoC specific drivers, fixing:
- A missing NULL pointer check in the mediatek memory driver
- An integer overflow issue in the Arm smccc firwmare interface
- A false-positive fortify-source check
- Error handling fixes for optee and smci
- Incorrect message format in one SCMI call"
* tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
memory: mtk-smi: Fix a null dereference for the ostd
arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9
MAINTAINERS: Update maintainer entry for keystone platforms
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
firmware: smccc: Fix check for ARCH_SOC_ID not implemented
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
optee: fix kfree NULL pointer
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
firmware: arm_scmi: Fix null de-reference on error path
- Fix compilation warnings on csky and sparc
- Rename multipage folios to large folios
- Rename AS_THP_SUPPORT and FS_THP_SUPPORT
- Add functions to zero portions of a folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmGem6wACgkQDpNsjXcp
gj7uvwgAjNqDWOVgwYU98daN6nKQQf5Vv35f0bzeKcKcHIOEWZ2+MUeXkI55h8TD
ss5L3O86sPtQmpKUQJJChZC4AhpIPRyjPA0JW6vYqXQd912M331WpGgFFyX5eI+3
OxfKLRULmopeWP1RjWmkWqlhYQHL5OLgAMC4VaBSfDHd1UMRf+F9JNm9qR7GCp9Q
Vb0qcmBMaQYt/K5sWRQyPUACVTF+27RLKAs+Om37NGekv1UqgOPMzi9nAyi9RjCi
rRY6oGupNgC+Y41jzlpaNoL71RPS92H769FBh/Fe4qu55VSPjfcN77qAnVhX5Ykn
4RhzZcEUoqlx9xG9xynk0mmbx2Bf4g==
=kvqM
-----END PGP SIGNATURE-----
Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)
Fixes: 1e321fa917 ("MIPS64: Support of at least 48 bits of SEGBITS)
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It turns out that 'decode_configs' -> 'set_ftlb_enable' is called under
c->cputype unset, which leaves FTLB disabled on BOTH 3A2000 and 3A3000
Fix it by calling "decode_configs" after c->cputype is initialized
Fixes: da1bd29742 ("MIPS: Loongson64: Probe CPU features via CPUCFG")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There exists the following issue under DEBUG_PREEMPT:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1
caller is show_cpuinfo+0x460/0xea0
...
Call Trace:
[<ffffffff8020f0dc>] show_stack+0x94/0x128
[<ffffffff80e6cab4>] dump_stack_lvl+0x94/0xd8
[<ffffffff80e74c5c>] check_preemption_disabled+0x104/0x110
[<ffffffff802209c8>] show_cpuinfo+0x460/0xea0
[<ffffffff80539d54>] seq_read_iter+0xfc/0x4f8
[<ffffffff804fcc10>] new_sync_read+0x110/0x1b8
[<ffffffff804ff57c>] vfs_read+0x1b4/0x1d0
[<ffffffff804ffb18>] ksys_read+0xd0/0x110
[<ffffffff8021c090>] syscall_common+0x34/0x58
We can see the following call trace:
show_cpuinfo()
cpu_has_fpu
current_cpu_data
smp_processor_id()
$ addr2line -f -e vmlinux 0xffffffff802209c8
show_cpuinfo
arch/mips/kernel/proc.c:188
$ head -188 arch/mips/kernel/proc.c | tail -1
if (cpu_has_fpu)
arch/mips/include/asm/cpu-features.h
# define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU)
arch/mips/include/asm/cpu-info.h
#define current_cpu_data cpu_data[smp_processor_id()]
Based on the above analysis, fix the issue by using raw_cpu_has_fpu
which calls raw_smp_processor_id() in show_cpuinfo().
Fixes: 626bfa0372 ("MIPS: kernel: proc: add CPU option reporting")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
HYPERVISOR_set_debugreg() is being called from noinstr code, so it
should be attributed "always_inline".
Fixes: 7361fac046 ("x86/xen: Make set_debugreg() noinstr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211125092056.24758-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
HYPERVISOR_get_debugreg() is being called from noinstr code, so it
should be attributed "always_inline".
Fixes: f4afb713e5 ("x86/xen: Make get_debugreg() noinstr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211125092056.24758-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.
Fixes these build errors:
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix:
WARNING: modpost: vmlinux.o(.text.unlikely+0x64d0): Section mismatch in reference \
from the function prepare_command_line() to the variable .init.data:command_line
The function prepare_command_line() references
the variable __initdata command_line.
This is often because prepare_command_line lacks a __initdata
annotation or the annotation of command_line is wrong.
Apparently some toolchains do different inlining decisions.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YZySgpmBcNNM2qca@zn.tnic
Since the commit c118c7303a ("powerpc/32: Fix vmap stack - Do not
activate MMU before reading task struct") a vmap stack overflow
results in a hard lockup. This is because emergency_ctx is still
addressed with its virtual address allthough data MMU is not active
anymore at that time.
Fix it by using a physical address instead.
Fixes: c118c7303a ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce30364fb7ccda489272af4a1612b6aa147e1d23.1637227521.git.christophe.leroy@csgroup.eu
The POWER9 ERAT flush instruction is a SLBIA with IH=7, which is a
reserved value on POWER7/8. On POWER8 this invalidates the SLB entries
above index 0, similarly to SLBIA IH=0.
If the SLB entries are invalidated, and then the guest is bypassed, the
host SLB does not get re-loaded, so the bolted entries above 0 will be
lost. This can result in kernel stack access causing a SLB fault.
Kernel stack access causing a SLB fault was responsible for the infamous
mega bug (search "Fix SLB reload bug"). Although since commit
48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C") that
starts using the kernel stack in the SLB miss handler, it might only
result in an infinite loop of SLB faults. In any case it's a bug.
Fix this by only executing the instruction on >= POWER9 where IH=7 is
defined not to invalidate the SLB. POWER7/8 don't require this ERAT
flush.
Fixes: 5008711259 ("KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119031627.577853-1-npiggin@gmail.com
As Vincent reports in:
https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com
The put_user() in schedule_tail() can get stuck in a livelock, similar
to a problem recently fixed on riscv in commit:
285a76bb2c ("riscv: evaluate put_user() arg before enabling user access")
In __raw_put_user() we have a critical section between
uaccess_ttbr0_enable() and uaccess_ttbr0_disable() where we cannot
safely call into the scheduler without having taken an exception, as
schedule() and other scheduling functions will not save/restore the
TTBR0 state. If either of the `x` or `ptr` arguments to __raw_put_user()
contain a blocking call, we may call into the scheduler within the
critical section. This can result in two problems:
1) The access within the critical section will occur without the
required TTBR0 tables installed. This will fault, and where the
required tables permit access, the access will be retried without the
required tables, resulting in a livelock.
2) When TTBR0 SW PAN is in use, check_and_switch_context() does not
modify TTBR0, leaving a stale value installed. The mappings of the
blocked task will erroneously be accessible to regular accesses in
the context of the new task. Additionally, if the tables are
subsequently freed, local TLB maintenance required to reuse the ASID
may be lost, potentially resulting in TLB corruption (e.g. in the
presence of CnP).
The same issue exists for __raw_get_user() in the critical section
between uaccess_ttbr0_enable() and uaccess_ttbr0_disable().
A similar issue exists for __get_kernel_nofault() and
__put_kernel_nofault() for the critical section between
__uaccess_enable_tco_async() and __uaccess_disable_tco_async(), as the
TCO state is not context-switched by direct calls into the scheduler.
Here the TCO state may be lost from the context of the current task,
resulting in unexpected asynchronous tag check faults. It may also be
leaked to another task, suppressing expected tag check faults.
To fix all of these cases, we must ensure that we do not directly call
into the scheduler in their respective critical sections. This patch
reworks __raw_put_user(), __raw_get_user(), __get_kernel_nofault(), and
__put_kernel_nofault(), ensuring that parameters are evaluated outside
of the critical sections. To make this requirement clear, comments are
added describing the problem, and line spaces added to separate the
critical sections from other portions of the macros.
For __raw_get_user() and __raw_put_user() the `err` parameter is
conditionally assigned to, and we must currently evaluate this in the
critical section. This behaviour is relied upon by the signal code,
which uses chains of put_user_error() and get_user_error(), checking the
return value at the end. In all cases, the `err` parameter is a plain
int rather than a more complex expression with a blocking call, so this
is safe.
In future we should try to clean up the `err` usage to remove the
potential for this to be a problem.
Aside from the changes to time of evaluation, there should be no
functional change as a result of this patch.
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com
Fixes: f253d827f3 ("arm64: uaccess: refactor __{get,put}_user")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20211122125820.55286-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
-----BEGIN PGP SIGNATURE-----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=Q2ZC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jqJa
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
* tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
Link: https://lore.kernel.org/r/20211116201429.2692786-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 279917e27e.
With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers
kernel bugs at runtime:
usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)!
kernel BUG at mm/usercopy.c:99!
Backtrace:
IAOQ[0]: usercopy_abort+0xc4/0xe8
[<00000000406ed1c8>] __check_object_size+0x174/0x238
[<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708
[<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328
[<000000004070b760>] compat_sys_execve+0x7c/0xb8
[<0000000040303eb8>] syscall_exit+0x0/0x14
The problem is, that we have an init section of at least 2MB size which
starts at _stext and is freed after bootup.
If then later some kernel data is (temporarily) stored in this free
memory, check_kernel_text_object() will trigger a bug since the data
appears to be inside the kernel text (>=_stext) area:
if (overlaps(ptr, len, _stext, _etext))
usercopy_abort("kernel text");
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
The extru instruction leaves the most significant 32 bits of the target
register in an undefined state on PA 2.0 systems. If any of these bits
are nonzero, this will break the calculation of the lock pointer.
Fix by using extrd,u instruction via extru_safe macro on 64-bit kernels.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The extru instruction leaves the most significant 32 bits of the
target register in an undefined state on PA 2.0 systems.
Provide a macro to safely use extru on 32- and 64-bit machines.
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
- Move the command line preparation and the early command line parsing
earlier so that the command line parameters which affect
early_reserve_memory(), e.g. efi=nosftreserve, are taken into
account. This was broken when the invocation of early_reserve_memory()
was moved recently.
- Use an atomic type for the SGX page accounting, which is read and
written lockless, to plug various race conditions related to it.
-----BEGIN PGP SIGNATURE-----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=CJUK
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Move the command line preparation and the early command line parsing
earlier so that the command line parameters which affect
early_reserve_memory(), e.g. efi=nosftreserve, are taken into
account. This was broken when the invocation of
early_reserve_memory() was moved recently.
- Use an atomic type for the SGX page accounting, which is read and
written locklessly, to plug various race conditions related to it.
* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Fix free page accounting
x86/boot: Pull up cmdline preparation and early param parsing
- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
unchecked MSR access error.
- Fix IIO event constraints for Snowridge and Skylake server chips.
-----BEGIN PGP SIGNATURE-----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=PeA1
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
unchecked MSR access error.
- Fix IIO event constraints for Snowridge and Skylake server chips.
* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Fix snapshot_branch_stack warning in VM
perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
Fix a bug in copying of sigset_t for 32-bit systems, which caused X to not start.
Fix handling of shared LSIs (rare) with the xive interrupt controller (Power9/10).
Fix missing TOC setup in some KVM code, which could result in oopses depending on kernel
data layout.
Fix DMA mapping when we have persistent memory and only one DMA window available.
Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a recent fix.
A couple of other minor fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Daniel Axtens, Finn Thain, Greg Kurz, Masahiro Yamada, Nicholas Piggin,
Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Ss4y
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
to not start.
- Fix handling of shared LSIs (rare) with the xive interrupt controller
(Power9/10).
- Fix missing TOC setup in some KVM code, which could result in oopses
depending on kernel data layout.
- Fix DMA mapping when we have persistent memory and only one DMA
window available.
- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
recent fix.
- A couple of other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.
* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Change IRQ domain to a tree domain
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/signal32: Fix sigset_t copy
powerpc/book3e: Fix TLBCAM preset at boot
powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
powerpc/pseries/ddw: simplify enable_ddw()
powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
powerpc/pseries: Fix numa FORM2 parsing fallback code
powerpc/pseries: rename numa_dist_table to form2_distances
powerpc: clean vdso32 and vdso64 directories
powerpc/83xx/mpc8349emitx: Drop unused variable
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled
and results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
-----BEGIN PGP SIGNATURE-----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=n7BA
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:
$ git ls-files . --exclude-standard --others
arch/hexagon/kernel/vmlinux.lds
Ignore it as all other architectures have.
Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:
drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
#define TIMER_ENABLE BIT(7)
^
arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
#define TIMER_ENABLE 0
^
1 error generated.
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c38 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prototype of mem_map_via_hcall() is missing in its header, so add
it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a43fb7da53 ("xen/pvh: Move Xen code for getting mem map via hcall out of common file")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211119153913.21678-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
I have two patches for 5.16:
* A fix that allows external modules to be built against read-only
source trees.
* A patch to turn KVM on in the defconfigs.
The second one isn't technically a fix, but it got tied up pending some
defconfig cleanups that ended up finding some larger issues. I figured
it'd be better to get the config changes some more testing, but didn't
want to hold up turning KVM on for that.
-----BEGIN PGP SIGNATURE-----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=EMf9
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have two patches for 5.16:
- allow external modules to be built against read-only source trees
- turn KVM on in the defconfigs
The second one isn't technically a fix, but it got tied up pending
some defconfig cleanups that ended up finding some larger issues. I
figured it'd be better to get the config changes some more testing,
but didn't want to hold up turning KVM on for that"
* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix building external modules
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
