Commit graph

20,308 commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz
a8ea2b23f6 rt2800usb: fix rt2800usb_rfcsr_read()
The driver should write the read request into RF_CSR_CFG register
and not BBP_CSR_CFG one in rt2800usb_rfcsr_read().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:49 -05:00
Bartlomiej Zolnierkiewicz
f44eafa76b rt2800pci: make Kconfig help entry more helpful
Document known issues with the driver to aid distribution makers,
users and developers in making informed decisions instead of wasting
their time needlessly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:49 -05:00
Bartlomiej Zolnierkiewicz
71eafe3230 rt2800usb: make Kconfig help entry more helpful
Document known issues with the driver to aid distribution makers,
users and developers in making informed decisions instead of wasting
their time needlessly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:48 -05:00
Johannes Berg
5ed176e1c4 mac80211: make ieee80211_find_sta per virtual interface
Since we have a TODO item to make all station
management dependent on virtual interfaces, I
figured I'd start with pushing such a change
to drivers before more drivers start using the
ieee80211_find_sta() API with a hw pointer and
cause us grief later on.

For now continue exporting the old API in form
of ieee80211_find_sta_by_hw(), but discourage
its use strongly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:48 -05:00
Lennert Buytenhek
5b9482dda6 mwl8k: pci BAR mapping changes
Map BAR0 as well, as we need to write to it during init on some chips.

Also, if BAR0 is a 64bit BAR, the register BAR becomes BAR2, so try
mapping BAR2 if mapping BAR1 fails.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:47 -05:00
Lennert Buytenhek
45eb400d50 mwl8k: shorten receive/transmit state variable names
To conserve horizontal space.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:47 -05:00
Lennert Buytenhek
a43c49a817 mwl8k: add support for enabling hardware sniffer mode
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:46 -05:00
Lennert Buytenhek
5dfd3e2c6f mwl8k: report rate and other information for received frames
When receiving a frame, report the antenna info, long/short preamble
status, 20/40 MHz flag, long/short guard interval status, MCS/legacy
rate status, and MCS/legacy rate index to the stack.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:46 -05:00
Lennert Buytenhek
22995b2411 mwl8k: clarify WME transmit queue 0/1 swizzling
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:45 -05:00
Lennert Buytenhek
3d76e82c95 mwl8k: use cond_resched() when loading firmware blocks
Since each firmware block takes on the order of several hundred usec
to upload to the hardware, using msleep in the inner loop would make
the firmware loading process take a lot more time than just doing
busy-waiting like we do now.  But if we keep the busy-waiting, we can
at least add a cond_resched() to the inner loop so that we give other
tasks a chance to run while the firmware is being loaded.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:45 -05:00
Lennert Buytenhek
32060e1b64 mwl8k: clear hardware MAC address if no STA interface configured
If there is no STA interface configured, clear the hardware MAC
address to prevent ACKing frames sent to our MAC address.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:45 -05:00
Lennert Buytenhek
77165d8809 mwl8k: enforce FIF_BCN_PRBRESP_PROMISC when no STA interfaces are active
When FIF_BCN_PRBRESP_PROMISC is not set, we enable the hardware's BSS
filter so that we'll only see packets destined for our BSS.  But if no
STA interfaces have been configured, we would end up passing the BSSID
00:00:00:00:00:00 into the POST_SCAN command, which actually disables
the hardware's BSS filter, as it's not a valid BSSID.

Fix this by passing in 01:00:00:00:00:00 instead (the criterion is
that the OUI part of the BSSID must be nonzero), and add comments to
explain what PRE_SCAN and POST_SCAN do.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:44 -05:00
Lennert Buytenhek
447ced07d0 mwl8k: implement FIF_ALLMULTI
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:44 -05:00
Lennert Buytenhek
3779752d76 mwl8k: use the mac80211-provided workqueue instead of creating our own
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:44 -05:00
Lennert Buytenhek
d5e308457e mwl8k: fix multicast address filter programming
mwl8k's ->prepare_multicast() currently just enables reception of
all multicast packets, which is somewhat ineffective.

Fix this by either disabling all multicast RX, enabling multicast
RX according to the multicast address filter table, or enabling all
multicast RX, depending on whether ->prepare_multicast() was given
any multicast addresses and whether the hardware multicast address
filter table is large enough to fit all requested addresses.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:43 -05:00
Lennert Buytenhek
88de754ad5 mwl8k: minor transmit quiescing rework
Minor changes to the transmit quiescing logic:
- Clarify the locking rules for ->tx_wait: only the holder of fw_mutex
  can wait for the TX path to become idle, but tx_wait itself is read
  and cleared by the TX reclaim tasklet under tx_lock.
- Inline mwl8k_txq_busy() in its callers.
- There's no need to kick the transmitter again in
  mwl8k_tx_wait_empty(), since it will have been kicked when the
  packets currently in the TX ring were added to it.
- If the TX ring didn't drain in time, run mwl8k_scan_tx_ring() after
  reading priv->pending_pkts without dropping tx_lock in between.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:43 -05:00
Lennert Buytenhek
c2c357ce30 mwl8k: coding style cleanups
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:43 -05:00
Lennert Buytenhek
8848fd253b mwl8k: fix GET_STAT firmware command packet layout
The GET_STAT command doesn't have an 'action' field like other
commands do, so remove it.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:42 -05:00
John W. Linville
3c6af5b54f wl1271: depend on INET
wl1271_main.c:(.text+0x271052): undefined reference to `unregister_inetaddr_notifier'
wl1271_main.c:(.text+0x2714d7): undefined reference to `register_inetaddr_notifier'

Driver is doing some filtering based on IP addresses...

Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04 18:44:42 -05:00
Jeremy Fitzhardinge
1ccbf5344c xen: move Xen-testing predicates to common header
Move xen_domain and related tests out of asm-x86 to xen/xen.h so they
can be included whenever they are necessary.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 08:47:24 -08:00
Jiri Slaby
b8883a65be NET: sungem, use spin_trylock_irqsave
Use spin_trylock_irqsave instead of open-coded
local_irq_save+spin_trylock.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 08:37:31 -08:00
Tonyliu
c8ee5538b0 DaVinci EMAC: correct param for ISR
emac_irq is declared as:

static irqreturn_t emac_irq(int irq, void *dev_id)
{
       struct net_device *ndev = (struct net_device *)dev_id;
       struct emac_priv *priv = netdev_priv(ndev);
    ... 

	Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this.

Signed-off-by: Tonyliu <Bo.Liu@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:45:02 -08:00
Torgny Johansson
3a19d56c71 cdc_ether: additional Ericsson MBM PID's to the whitelist
Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:25:02 -08:00
Eric Dumazet
c7079857cd bnx2: avoid compiler warnings
drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’:
drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function
drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’:
drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function

One fix would be to have an initial value, but a plain return might be better.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:26 -08:00
Thiago Farina
df7641af49 trivial: remove duplicated MIN macro from tehuti.
Since the kernel api already has the macro "min",
just use it instead of declaring another one.

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:24 -08:00
roel kluin
0d37f36ff9 cnic: ensure ulp_type is not negative
`ulp_type' is signed, make sure it is not negative
when we read the array element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:23 -08:00
Ron Mercer
885ee398de qlge: Clean up netdev->stats usage.
Don't access netdev->stats in IO path.  Save them in tx_ring/rx_rings
and add them up when get_stats API is called.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:01:38 -08:00
Ron Mercer
1e34e307d0 qlge: Add firmware/driver sub-command support.
These sub-commands are issued by another (FCoE) function requesting
an operation on a shared resource.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:01:37 -08:00
Ron Mercer
32a5b2a0d5 qlge: Fix indentations.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:01:35 -08:00
Inaky Perez-Gonzalez
e7fec0bbf1 wimax/i2400m: fix inverted value in i2400ms_bus_setup()
Fix inverted setting of 'retries'; when we are in the probe() path, we
should retry to enable the function only once; otherwise until it
times out.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:43 -08:00
Inaky Perez-Gonzalez
20d57f8e25 wimax/i2400m: fix SDIO debugfs dentry name
The SDIO specific debugfs dentry was being misnamed "i2400m-usb"
instead of "i2400m-sdio".

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:42 -08:00
Inaky Perez-Gonzalez
5a039e7852 wimax/i2400m: fix bad assignment of return value in i2400mu_tx_bulk_out
The function was always setting the return value to the amount of
bytes transferred, overwriting the error code in error paths.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:41 -08:00
Inaky Perez-Gonzalez
faf57162e4 wimax/i2400m: handle USB stalls
When the device stalls, clear it and retry; if it keeps failing too
often, reset the device.

This specially happens when running on virtual machines; the real
hardware doesn't seem to trip on stalls too much, except for a few
reports in the mailing list (still to be confirmed this is the cause,
although it seems likely.

NOTE: it is not clear if the URB has to be resubmitted fully or start
only at the offset of the first transaction sent. Can't find
documentation to clarify one end or the other.

Tests that just resubmit the whole URB seemed to work in my
environment.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:40 -08:00
Inaky Perez-Gonzalez
fae92216da wimax/i2400m: don't retry SDIO enable in probe() paths
The iwmc3200 has a quirk where retrying SDIO enable during the probe()
path causes bad interactions with the TOP function controller that
causes a reset storm. The workaround is simply not to retry an SDIO
enable in said path (and still do in the reset / reinitialization
paths).

The driver does so by checking i2400ms->debugfs_dentry to see if it
has been initialized; if not, it is in the probe() path. Document said
fact in i2400ms->debugfs_entry.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:39 -08:00
Inaky Perez-Gonzalez
02eb41ef2a wimax/i2400m: correctly identify all iwmc3200-based SKUs
Different paths of the i2400m SDIO driver need to take care of a few
SKU-specific quirks. For the ones that are common to to all the
iwmc3200 based devices, introduce i2400ms->iwmc3200 [set in
i2400ms_probe()], so it doesn't have to check against the list of
iwmc3200 SKU IDs on each quirk site.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:38 -08:00
Inaky Perez-Gonzalez
296bd4bdd0 wimax/i2400m: Fix USB timeout specifications (to ms from HZ)
The USB code was incorrectly specifiying timeouts to be in jiffies vs
msecs. On top of that, lower it to 200ms, as 1s is really too long
(doesn't allow the watchdog to trip a reset if the device timesout too
often).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:37 -08:00
Inaky Perez-Gonzalez
5ab5a7215a wimax/i2400m: fix device getting stuck in IDLE mode
The i2400m, when conected, will negotiate with the WiMAX basestation
to put the link in IDLE mode when it is not being used. Upon RX/TX
traffic, the link has to be restablished and that might require some
crypto handshakes and maybe a DHCP renew.

This process might take up to 20 (!) seconds and in some cases we were
seeing network watchdog warnings that weren't needed.

So the network watchdog timeout is updated to be slightly above that
20s threshold. As well, the driver itself will double check if the
device is stuck in IDLE mode -- if that happens, the device will be
reset (in this case the queue is also woken up to remove bogus--once
the device is reset--warnings).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:36 -08:00
Inaky Perez-Gonzalez
c931ceeb78 wimax/i2400m: introduce i2400m_reset(), stopping TX and carrier
Currently the i2400m driver was resetting by just calling
i2400m->bus_reset(). However, this was missing stopping the TX queue
and downing the carrier. This was causing, for the corner case of the
driver reseting a device that refuses to go out of idle mode, that a
few packets would be queued and more than one reset would go through,
making the recovery a wee bit messy.

To avoid introducing the same cleanup in all the bus-specific driver,
introduced a i2400m_reset() function that takes care of house cleaning
and then calling the bus-level reset implementation.

The bulk of the changes in all files are just to rename the call from
i2400m->bus_reset() to i2400m_reset().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:36 -08:00
Inaky Perez-Gonzalez
55a662d646 wimax/i2400m: implement passive mode as a module option
Some versions of the user space Intel WiMAX daemon need to have full
control over the device initialization sequence. By setting the module
option i2400.passive_mode to 1, the driver defers all device
configuration and initialization to user space.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:34 -08:00
Linus Torvalds
a84216e671 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: check interface is down before type change
  cfg80211: fix NULL ptr deref
  libertas if_usb: Fix crash on 64-bit machines
  mac80211: fix reason code output endianness
  mac80211: fix addba timer
  ath9k: fix misplaced semicolon on rate control
  b43: Fix DMA TX bounce buffer copying
  mac80211: fix BSS leak
  rt73usb.c : more ids
  ipw2200: fix oops on missing firmware
  gre: Fix dev_addr clobbering for gretap
  sky2: set carrier off in probe
  net: fix sk_forward_alloc corruption
  pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card
  r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames
  ibmtr: possible Read buffer overflow?
  net: Fix RPF to work with policy routing
  net: fix kmemcheck annotations
  e1000e: rework disable K1 at 1000Mbps for 82577/82578
  e1000e: config PHY via software after resets
  ...
2009-11-03 07:44:01 -08:00
Atsushi Nemoto
a02b7b7a13 tc35815: Kill unused code
- TC35815_DMA_SYNC_ONDEMAND is always enabled.
- WORKAROUND_LOSTCAR is always enabled.
- WORKAROUND_100HALF_PROMISC is always enabled.
- GATHER_TXINT is always enabled.
- TC35815_USE_PACKEDBUFFER is always disabled.
- NO_CHECK_CARRIER is always disabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:43:58 -08:00
Atsushi Nemoto
c6a2dbbade tc35815: Kill non-napi code
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:43:56 -08:00
Sandeep Gopalpet
7a8b3372e2 gianfar: Basic Support for programming hash rules
This patch provides basic hash rules programming via the ethtool
interface.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:59 -08:00
Sandeep Gopalpet
46ceb60ca8 gianfar: Add Multiple group Support
This patch introduces multiple group support for etsec2.0
devices.

Multiple group support is provided by mapping the set of enabled
queues to different groups and then programming the per group
regsiters imask, ievent, rstat, tstat.

The queues corresponding to a group are indicated by programming
isrg (interrupt steering) registers.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:59 -08:00
Sandeep Gopalpet
2e0246c72f gianfar: Add support etsec2.0 registers.
This patch adds support for etsec2.0 regsiters

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:58 -08:00
Sandeep Gopalpet
1d2397d742 fsl_pq_mdio: Add Suport for etsec2.0 devices.
This patch adds mdio support for etsec2.0 devices.

Modified the fsl_pq_mdio structure to include the new mdio
members.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:57 -08:00
Sandeep Gopalpet
fba4ed030c gianfar: Add Multiple Queue Support
This patch introduces multiple Tx and Rx queues.
The incoming packets can be classified into different queues
based on filer rules (out of scope of this patch). The number
of queues enabled will be based on a DTS entries fsl,num_tx_queues
and fsl,num_rx_queues.

Although we are enabling multiple queues, the interrupt coalescing
is on per device level (etsec-1.7 doesn't support multiple rxics
and txics).

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:57 -08:00
Sandeep Gopalpet
f4983704a6 gianfar: Introduce logical group support.
This patch introduces the group structure. The elements of this
structure are the interrupt lines, their corresponding names,
the register memory map.
The elements for this group are factored out from the gfar_private
structure. The introduction of group structure will help in
providing support for newer versions of etsec.

Currently, the support is present only for single group and
single tx/rx queues.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:56 -08:00
Sandeep Gopalpet
a12f801d4b gianfar: Add per queue structure support
This patch introduces per tx and per rx queue structures.
Earlier the members of these structures were inside the
gfar_private structure.

Moving forward if we want to support multiple queues, we need
to refactor the gfar_private structure so that introduction of
multiple queues is easier.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:40:55 -08:00
Matt Carlson
123b43e971 tg3: Update version to 3.103
This patch updates the tg3 version to 3.103.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 23:39:15 -08:00