Mark Brown
132d3f950e
mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
...
Otherwise we'd need massive ifdefs in the code.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 13:03:56 +02:00
Darius Augulis
3f2030163e
Fix ifdef in plat-mxc/irc.c
...
Move ifdef under function brackets. This fixes compile crach when IRQ priorities
are disabled.
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16 13:03:11 +02:00
Darius Augulis
3fa6dd6a7a
MX1ADS: remove I2C ifdefs
...
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16 12:57:15 +02:00
Ilya Yanok
248ca85f01
qong: remove AIPS[12] mappings from machine-specific iotable
...
AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-04-16 12:57:15 +02:00
Mark Brown
9070e7afb8
mx31ads: imoux pins should be passed in as unsigned int
...
To match the mxc_iomux_setup_multiple_pins() prototype.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 12:57:15 +02:00
Paulius Zaleckas
470f9b602e
MXC: remove orphan imx_init_uart() definition
...
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:14 +02:00
Valentin Longchamp
d5f281043a
mx31: pin definition for csi
...
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16 12:57:14 +02:00
Valentin Longchamp
c44af41ad5
MX31: pin definition for sdhc2
...
This also adds the pins used on mx31moboard for WP and CD
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16 12:57:14 +02:00
Vladimir Barinov
c5c96f4dce
MX31: Add I2C pin definitions
...
Add I2C pin definitions for MX31 SoC
Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
2009-04-16 12:57:13 +02:00
Sascha Hauer
4bd962987d
MX31: Add more alternate pin definitions
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Sascha Hauer
f8e5143be7
pcm037 board support: Fix eth interrupt gpio setting
...
gpio_direction_input needs the gpio number, not the pin description.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Holger Schurig
1b3c9bf2cd
imx21: activate i2c
...
Set the correct clkdev-name for the i2c clock.
It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:13 +02:00
Holger Schurig
289a689b10
imx21: fixes some clocknames
...
Signed-off-by: <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:12 +02:00
Ben Dooks
db75639406
[ARM] S3C: Export s3c_gpio_cfgpin and s3c_gpio_setpull for modules
...
Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 11:52:02 +01:00
Takashi Iwai
ffd0e56c60
ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs
...
When the headphone can have no unique DAC, the current code doesn't
check the HP-detection although it should. Put the hp-detection check
before the DAC check to fix this bug.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-16 12:20:24 +02:00
Atsushi Nemoto
3664090e19
phylib: Fix delay argument of schedule_delayed_work
...
The commit a390d1f3 ("phylib: convert state_queue work to
delayed_work") missed converting 'expires' value to 'delay' value.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 03:13:07 -07:00
Mark Brown
0d960e8891
ASoC: Request shared rates for WM8903
...
It has a shared LRCLK.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 11:03:11 +01:00
Mark Brown
fd5dfad9cf
ASoC: Volume controls are never of boolean type
...
Some limited volume controls (mostly simple attenuations) have only two
settings so the ASoC info functions misreport them as booleans. Since
we currently have no better information check for " Volume" in the
control name and always report any controls matching as being integer.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 11:03:10 +01:00
Mark Brown
3f1a4d8267
ASoC: Check we have DAI ops when calling via accessor functions
...
Also make sure we're checking for the right operation while we're here.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 11:03:09 +01:00
Sascha Hauer
fe957c40ec
fec: call fec_restart() in fec_open()
...
We called fec_stop() in fec_enet_close(), thus we have to call
fec_restart() in fec_enet_open().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:54 -07:00
Sascha Hauer
f0b3fbeae1
FEC Buffer rework
...
Allocate buffers in fec_open and free them again in fec_close. This makes
it possible to use this driver as a module.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:53 -07:00
Sascha Hauer
009fda83ee
fec: switch to net_device_ops
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:52 -07:00
Sascha Hauer
3644ee00c4
fec: remove debugging printks
...
These printks in fec_timeout do not give useful information in
a production kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:52 -07:00
Sascha Hauer
8549889c33
fec: align receive packets
...
Otherwise we get a lot of alignment errors
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:51 -07:00
Sascha Hauer
4f1ceb4b46
fec: refactor init function
...
fec_enet_init() does the hardware initialisation and then calls
fec_restart() which does the same initialisation again, so we
can safely remove the initialisation from fec_enet_init().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:51 -07:00
Sascha Hauer
4e8318368a
fec: refactor set_multicast_list() to make it more readable
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:50 -07:00
Sascha Hauer
22f6b860da
fec: Codingstyle cleanups
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:50 -07:00
Sascha Hauer
8d4dd5cff8
fec: remove unnecessary cast
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:49 -07:00
Sascha Hauer
2e28532f7e
fec: do not typedef struct types
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:48 -07:00
Sascha Hauer
f44d630528
fec: switch to writel/readl
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:34:47 -07:00
Ben Dooks
ea5a6fd810
[ARM] s3c2410_defconfig: Update miscellaneous drivers
...
Update the driver build in the s3c2410_defconfig for the
LED, IDE, Input and EEPROM options
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:24 +01:00
Ben Dooks
f8832a988c
[ARM] s3c2410_defconfig: Update USB device drivers
...
Add more USB device driver options to the s3c2410_defconfig,
mostly as modules.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:23 +01:00
Ben Dooks
89d44a0f00
[ARM] s3c2410_defconfig: Update filesystem options
...
Update the filesystem options in the s3c2410_defconfig,
such as building ext4, enable the automounter as modules
and update the network filesysyem choices.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:23 +01:00
Ben Dooks
f04121e457
[ARM] s3c2410_defconfig: Add video/radio drivers
...
Add a set of various video and radio drivers to the
s3c2410_defconfig as modules.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:22 +01:00
Ben Dooks
68c468c9d0
[ARM] s3c2410_defconfig: Add sound drivers
...
Add sound drivers to the s3c2410_defconfig.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:21 +01:00
Alexander Beregalov
2160187a0a
sun3lance: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:26 -07:00
Alexander Beregalov
ec4e0cff9b
smc911x: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:25 -07:00
Alexander Beregalov
8c2c6be186
sgiseeq: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:25 -07:00
Alexander Beregalov
b4cf3421af
sb1250-mac: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:24 -07:00
Alexander Beregalov
a33a2bb3c9
rionet: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:24 -07:00
Alexander Beregalov
1ec847f6d4
pci-skeleton: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:23 -07:00
Alexander Beregalov
9e0ac841f4
pasemi_mac: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:22 -07:00
Alexander Beregalov
cd732de21e
netx-eth: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:22 -07:00
Alexander Beregalov
96cd55ea0e
mvme147: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:21 -07:00
Alexander Beregalov
d6771e0b89
mipsnet: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:18 -07:00
Alexander Beregalov
d53bc2df18
meth: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:17 -07:00
Alexander Beregalov
0d3936a8b1
macmace: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:16 -07:00
Alexander Beregalov
488b4abcd7
mace: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:16 -07:00
Alexander Beregalov
71f4367ca2
lib82596: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:15 -07:00
Alexander Beregalov
52b031ff39
korina: convert to net_device_ops
...
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:20:15 -07:00