Commit graph

168,816 commits

Author SHA1 Message Date
Paul Mundt
c20351846e sh: Flush only the needed range when unmapping a VMA.
This follows the ARM change from Aaro Koskinen:

	When unmapping N pages (e.g. shared memory) the amount of TLB
	flushes done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it
	should be N at maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8
	pages, so there is a noticeable performance penalty when
	unmapping a large VMA and the system is spending its time in
	flush_tlb_range().

	The problem is that tlb_end_vma() is always flushing the full VMA
	range. The subrange that needs to be flushed can be calculated by
	tlb_remove_tlb_entry(). This approach was suggested by Hugh
	Dickins, and is also used by other arches.

	The speed increase is roughly 3x for 8M mappings and for larger
	mappings even more.

Bits and peices are taken from the ARM patch as well as the existing
arch/um implementation that is quite similar.

The end result is a significant reduction in both partial and full TLB
flushes initiated through flush_tlb_range().

At the same time, the nommu implementation was broken, had a superfluous
cache flush, and subsequently would have triggered a BUG_ON() if a
code-path had triggered it. Tidy this up for correctness and provide a
nopped-out implementation there.

More background on the initial discussion can be found at:

	http://marc.info/?t=123609820900002&r=1&w=2
	http://marc.info/?t=123660375800003&r=1&w=2

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 21:19:49 +09:00
Joerg Roedel
86f3195293 dma-debug/x86: register pci bus for dma-debug leak detection
Impact: detect dma memory leaks for pci devices

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:49 +01:00
Joerg Roedel
41531c8f5f dma-debug: add a check dma memory leaks
Impact: allow architectures to monitor busses for dma mem leakage

This patch adds checking code to detect if a device has pending DMA
operations when it is about to be unbound from its device driver.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:49 +01:00
Joerg Roedel
2e34bde185 dma-debug: add checks for kernel text and rodata
Impact: get notified if a device dma maps illegal areas

This patch adds a check to print a warning message when a device driver
tries to map a memory area from the kernel text segment or rodata.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:48 +01:00
David Woodhouse
6c132d1bcd dma-debug: print stacktrace of mapping path on unmap error
Impact: saves stacktrace of a dma mapping and prints it if there is an  error

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:48 +01:00
Joerg Roedel
187f9c3f05 dma-debug: Documentation update
Impact: add documentation about DMA-API debugging to DMA-API.txt

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:47 +01:00
Joerg Roedel
2118d0c548 dma-debug: x86 architecture bindings
Impact: make use of DMA-API debugging code in x86

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:46 +01:00
David Woodhouse
ac26c18bd3 dma-debug: add function to dump dma mappings
This adds a function to dump the DMA mappings that the debugging code is
aware of -- either for a single device, or for _all_ devices.

This can be useful for debugging -- sticking a call to it in the DMA
page fault handler, for example, to see if the faulting address _should_
be mapped or not, and hence work out whether it's IOMMU bugs we're
seeing, or driver bugs.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-17 12:56:39 +01:00
Thomas Gleixner
337fff8b5e debugobjects: delay free of internal objects
Impact: avoid recursive kfree calls, less slab activity on heavy load

debugobjects checks on kfree whether tracked objects are freed. When a
tracked object is freed debugobjects frees the internal reference
object as well. The debug object slab cache is marked to not recurse
into debugobjects when a slab objects is freed, but the recursive call
can be problematic versus locking in the memory allocator.

Defer the freeing of debug slab objects via schedule_work. The reasons
not to use RCU are:

1) rcu makes the data structure larger
2) there is no real need for rcu as nothing references the obj after
   we freed it
3) under heavy load it is easier to reuse the to be freed objects instead
   of allocating new objects from the slab. This lowered the slab activity
   significantly in a heavy load networking test where lots of timers are
   created/destroyed. The workqueue based delayed free allows us just to
   put the to be freed objects back into the object pool and reuse them
   right away.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <200903162049.58058.nickpiggin@yahoo.com.au>
2009-03-17 12:28:30 +01:00
Thomas Gleixner
1be1cb7b47 debugobjects: replace static objects when slab cache becomes available
Impact: refactor/consolidate object management, prepare for delayed free

debugobjects allocates static reference objects to track objects which
are initialized or activated before the slab cache becomes
available. These static reference objects have to be handled
seperately in free_object(). The handling of these objects is in the
way of implementing a delayed free functionality. The delayed free is
required to avoid callbacks into the mm code from
debug_check_no_obj_freed().

Replace the static object references with dynamic ones after the slab
cache has been initialized. The static objects are now marked initdata.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <200903162049.58058.nickpiggin@yahoo.com.au>
2009-03-17 12:28:30 +01:00
Luis Henriques
708dc51253 sched: small optimisation of can_migrate_task()
There were 3 invocations of task_hot() in can_migrate_task().

Replace these 3 invocations by only one invocation, cached in
a local variable.

Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195902.GA6197@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-17 12:04:41 +01:00
Luis Henriques
80dd99b368 sched: fix typos in documentation
Fixed typos in function documentation.

Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195809.GA6073@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-17 12:04:40 +01:00
Yinghai Lu
f0348c438c x86: MTRR workaround for system with stange var MTRRs
Impact: don't trim e820 according to wrong mtrr

Ozan reports that his server emits strange warning.
it turns out the BIOS sets the MTRRs incorrectly.

Ignore those strange ranges, and don't trim e820,
just emit one warning about BIOS

Reported-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49BEE1E7.7020706@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-17 10:47:47 +01:00
Ingo Molnar
4176935b58 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-03-17 10:37:37 +01:00
Paul Mundt
3a3b311ca3 sh: Update debugfs ASID dumping for 16-bit ASID support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 17:59:31 +09:00
Paul Mundt
c54a43e90b sh: tlb-pteaex: Kill off legacy PTEA updates.
While harmless, PTEA has different semantics on these parts, and is only
used in extended TLB mode. Kill off the legacy support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 17:58:33 +09:00
Paul Mundt
8263a67e16 sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores
that implement the PTAEX register and respective functionality. Presently
only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs).

The main change is in how the PTE is written out when loading the entry
in to the TLB, as well as in how the TLB entry is selectively flushed.

While SH-X2 extended mode splits out the memory-mapped U and I-TLB data
arrays for extra bits, extended ASID mode splits out the address arrays.
While we don't use the memory-mapped data array access, the address
array accesses are necessary for selective TLB flushes, so these are
implemented newly and replace the generic SH-4 implementation.

With this, TLB flushes in switch_mm() are almost non-existent on newer
parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 17:49:49 +09:00
Takashi Iwai
37ba1b6283 Merge branch 'fix/opl3sa2-suspend' into topic/isa-misc 2009-03-17 09:28:13 +01:00
Krzysztof Helt
dde332b660 ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2
Fix the OOPS during a opl3sa2 card suspend
and resume if the driver is loaded but the card
is not found.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17 09:27:47 +01:00
Tom Zanussi
c269fc8c53 tracing: fix leak in event_format_read()
Impact: fix memory leak

If event_format_read() exits early due to nonzero ppos, the
previous kmalloc doesn't get freed - might as well do the
check before the kmalloc and avoid the problem.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237270859.8033.141.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-17 08:38:23 +01:00
Ingo Molnar
e410613334 Merge branch 'tracing/syscalls' into tracing/core 2009-03-17 08:37:20 +01:00
Nobuhiro Iwamatsu
da78800632 sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp
IRQ for sh_eth of sh7763rdp became multi handling.
Therefore, the IRQ number of sh_eth is changed, too.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 15:20:59 +09:00
Nobuhiro Iwamatsu
32910e2c52 sh: espt-giga board support
This adds support for the ESPT-Giga (Ethernet Serial Parallel
Translator) SH7763-based reference board.

Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:

	http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 15:18:52 +09:00
Bjorn Helgaas
e60cc7a6f0 ACPI: move private declarations to internal.h
A number of things that shouldn't be exposed outside the ACPI core
were declared in include/acpi/acpi_drivers.h, where anybody can
see them.  This patch moves those declarations to a new "internal.h"
inside drivers/acpi.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 02:09:24 -04:00
Bjorn Helgaas
1c48aa36ef ACPI: update Kconfig help texts (no functional changes)
Use "help" (not "---help---") consistently throughout.

ACPI can't be a module, so if both ACPI & APM are configured,
we use ACPI.

Update pointers to ACPI CA and Linux ACPI projects.

Replace "Compaq" with "Hewlett-Packard" in the spec developer list.

Fix typo in /sys/module path.

The user-space daemon is "acpid", not "acpi".

Add standard "To compile this driver as a module ..." help text.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 02:06:04 -04:00
Bjorn Helgaas
c686d141c7 ACPI: PCI: use generic pci_swizzle_interrupt_pin()
Use the generic pci_swizzle_interrupt_pin() instead of ACPI-specific code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:56:30 -04:00
Bjorn Helgaas
5f0dccaa81 ACPI: pci_link: simplify list of link devices
We don't need a struct containing a count and a list_head; a simple
list_head is sufficient.  The list iterators handle empty lists
fine.

Furthermore, we don't need to check for null list entries because we
only add non-null entries.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:53:29 -04:00
Bjorn Helgaas
6eca4b4ca1 ACPI: pci_link: remove unnecessary null pointer checks
Better to oops and learn about a bug than to silently cover it up.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:52:40 -04:00
Bjorn Helgaas
c9d6244329 ACPI: pci_link: remove unnecessary casts and initializations
Remove unnecessary casts and initializations.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:52:18 -04:00
Bjorn Helgaas
1c9ca3a7d4 ACPI: pci_link: clean up whitespace
This patch makes whitespace and indentation more consistent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:51:36 -04:00
alex.shi
ff69f2bba6 acpi: fix of pmtimer overflow that make Cx states time incorrect
We found Cx states time abnormal in our some of machines which have 16
LCPUs, the C0 take too many time while system is really idle when kernel
enabled tickless and highres.  powertop output is below:

     PowerTOP version 1.9       (C) 2007 Intel Corporation

Cn                Avg residency       P-states (frequencies)
C0 (cpu running)        (40.5%)         2.53 Ghz     0.0%
C1                0.0ms ( 0.0%)         2.53 Ghz     0.0%
C2              128.8ms (59.5%)         2.40 Ghz     0.0%
                                        1.60 Ghz   100.0%

Wakeups-from-idle per second :  4.7     interval: 20.0s
no ACPI power usage estimate available

Top causes for wakeups:
  41.4% ( 24.9)       <interrupt> : extra timer interrupt
  20.2% ( 12.2)     <kernel core> : usb_hcd_poll_rh_status
(rh_timer_func)

After tacking detailed for this issue, Yakui and I find it is due to 24
bit PM timer overflows when some of cpu sleep more than 4 seconds.  With
tickless kernel, the CPU want to sleep as much as possible when system
idle.  But the Cx sleep time are recorded by pmtimer which length is
determined by BIOS.  The current Cx time was gotten in the following
function from driver/acpi/processor_idle.c:

static inline u32 ticks_elapsed(u32 t1, u32 t2)
{
       if (t2 >= t1)
               return (t2 - t1);
       else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
               return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
       else
               return ((0xFFFFFFFF - t1) + t2);
}

If pmtimer is 24 bits and it take 5 seconds from t1 to t2, in above
function, just about 1 seconds ticks was recorded.  So the Cx time will be
reduced about 4 seconds.  and this is why we see above powertop output.

To resolve this problem, Yakui and I use ktime_get() to record the Cx
states time instead of PM timer as the following patch.  the patch was
tested with i386/x86_64 modes on several platforms.

Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Tested-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Yakui.zhao <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:13:46 -04:00
Paul Mundt
40f49e7ed7 sh: dma: Make G2 DMA configurable.
Follow the PVR2 DMAC change for G2 DMA.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 12:47:56 +09:00
Steven Rostedt
6adaad14d7 tracing: stop comm recording on tracing off
Impact: fix for losing comms in trace

The command lines of tasks are cached at sched switch to not need
to record them at every trace point.  Disabling the tracing on stops
the recording of traces, but does not stop the caching of command lines.
When the tracing is off the cache may overflow and cause the tracing
to show incorrect tasks matching the PIDs.

This patch disables prevents updates to the comm cache when the ring buffer
is off.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16 23:31:15 -04:00
Steven Rostedt
4ca5308523 tracing: protect reader of cmdline output
Impact: fix to one cause of incorrect comm outputs in trace

The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.

This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16 23:27:06 -04:00
Eric Sandeen
d33a1976fb ext4: fix bb_prealloc_list corruption due to wrong group locking
This is for Red Hat bug 490026: EXT4 panic, list corruption in
ext4_mb_new_inode_pa

ext4_lock_group(sb, group) is supposed to protect this list for
each group, and a common code flow to remove an album is like
this:

    ext4_get_group_no_and_offset(sb, pa->pa_pstart, &grp, NULL);
    ext4_lock_group(sb, grp);
    list_del(&pa->pa_group_list);
    ext4_unlock_group(sb, grp);

so it's critical that we get the right group number back for
this prealloc context, to lock the right group (the one 
associated with this pa) and prevent concurrent list manipulation.

however, ext4_mb_put_pa() passes in (pa->pa_pstart - 1) with a 
comment, "-1 is to protect from crossing allocation group".

This makes sense for the group_pa, where pa_pstart is advanced
by the length which has been used (in ext4_mb_release_context()),
and when the entire length has been used, pa_pstart has been
advanced to the first block of the next group.

However, for inode_pa, pa_pstart is never advanced; it's just
set once to the first block in the group and not moved after
that.  So in this case, if we subtract one in ext4_mb_put_pa(),
we are actually locking the *previous* group, and opening the
race with the other threads which do not subtract off the extra
block.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-16 23:25:40 -04:00
Theodore Ts'o
afd4672dc7 ext4: Add auto_da_alloc mount option
Add a mount option which allows the user to disable automatic
allocation of blocks whose allocation by delayed allocation when the
file was originally truncated or when the file is renamed over an
existing file.  This feature is intended to save users from the
effects of naive application writers, but it reduces the effectiveness
of the delayed allocation code.  This mount option disables this
safety feature, which may be desirable for prodcutions systems where
the risk of unclean shutdowns or unexpected system crashes is low.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-16 23:12:23 -04:00
Frederic Weisbecker
03303549b1 tracing/ftrace: fix the check on nopped sites
Impact: fix a dynamic tracing failure

Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:

fa9d13cf13
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)

The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16 22:15:36 -04:00
Jeremy Fitzhardinge
42854dc0a6 x86, paravirt: prevent gcc from generating the wrong addressing mode
Impact: fix crash on VMI (VMware)

When we generate a call sequence for calling a paravirtualized
function, we presume that the generated code is "call *0xXXXXX",
which is a 6 byte opcode; this is larger than a normal
direct call, and so we can patch a direct call over it.

At the moment, however we give gcc enough rope to hang us by
putting the address in a register and generating a two byte
indirect-via-register call.  Prevent this by explicitly
dereferencing the function pointer and passing it into the
asm as a constant.

This prevents crashes in VMI, as it cannot handle unpatchable
callsites.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
LKML-Reference: <49BEEDC2.2070809@goop.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-16 18:36:31 -07:00
Paul Mundt
da62e71d13 sh: dma: Make PVR2 DMA configurable.
With arch/sh/drivers/dma/ always being built, the Dreamcast DMA engines
are being unconditionally built in, regardless of whether the DMA API is
enabled or not. This is a regression from previous behaviour, but there
is not much advantage in building them all in unconditionally regardless.
Add a new config option to make it optional, and update the only user of
it to reflect that.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 09:30:36 +09:00
Greg Ungerer
7a2cf4af15 m68k: merge the non-MMU and MMU versions of siginfo.h
It is trivial to merge the non-MMU and MMU versions of siginfo.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of siginfo.h are not installed).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-17 08:47:11 +10:00
Greg Ungerer
9df3d51b59 m68k: use the MMU version of unistd.h for all m68k platforms
The MMU version of unistd.h can be use on non-MMU platrorms as well.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of unistd.h are not installed).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-17 08:44:55 +10:00
Greg Ungerer
8dba99e077 m68k: merge the non-MMU and MMU versions of signal.h
It is trivial to merge the non-MMU and MMU versions of signal.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of signal.h are not installed).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-17 08:44:42 +10:00
Greg Ungerer
230d1866a9 m68k: merge the non-MMU and MMU versions of ptrace.h
It is trivial to merge the non-MMU and MMU versions of ptrace.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of ptrace.h are not installed).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-17 08:44:42 +10:00
Greg Ungerer
c5f5d3e6ed m68k: use MMU version of setup.h for both MMU and non-MMU
The MMU version of setup.h can be used for all m68k platforms.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of setup.h are not installed).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-17 08:44:41 +10:00
Russell King
3879f5d6f0 Merge branch 'imx-fb-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into devel
Conflicts:

	drivers/video/mx3fb.c
2009-03-16 22:28:04 +00:00
Reinette Chatre
808ff697b3 iwlwifi: correct log level when error occurs
user needs to see this message even if debugging disabled

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:47 -04:00
Reinette Chatre
18d426c4a8 iwlwifi: print contents of control register when error occurs
hopefully the register contents will guide us to why this failure occured

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:47 -04:00
Mohamed Abbas
48676eb3c3 iwlagn: fix warning when set WEP key
iwl_clear_station_table will be called every time rxon called.
In this function ucode_key_table is set to 0 even though a static
WEP security is set. This will cause in many warning and might be
an issue if dynamic WEP is set. This patch make sure we keep track
of all existing static WEP when this function is called.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:47 -04:00
Reinette Chatre
fd9377ee6c iwl3945: unmap previously mapped memory
During preparation of TX we create DMA mapping to TX command as part of
preparing the TFD. This mapping needs to be cleared at the time TFD is
freed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:46 -04:00
Abhijeet Kolekar
732587ab43 iwl3945: use iwl_tx_cmd_complete
iwl3945 uses iwl_tx_cmd_complete to reclaim the unused buffers of the queue.
iwl_tx_cmd_complete in turn call the iwl_hcmd_queue_reclaim which will
unmap the dma mapping to tx_cmd and frees the memory.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:46 -04:00