Commit graph

1,013,453 commits

Author SHA1 Message Date
Koby Elbaz
7d21114b03 habanalabs: support DEVICE_UNUSABLE error indication from FW
In case of multiple ECC errors, FW will set the DEVICE_UNUSABLE bit.
On boot-up, the driver will therefore fail inserting the device.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Oded Gabbay
ae382c22fc habanalabs: use strscpy instead of sprintf and strlcpy
Prefer the use of strscpy when copying the ASIC name into a char array,
to prevent accidentally exceeding the array's length.
In addition, strlcpy is frowned upon so replace it.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Oded Gabbay
131d1ba130 habanalabs: remove the store jobs array from CS IOCTL
The store part was never implemented in the code and never been used
by the userspace applications.

We currently use the related parameters to a different purpose with
a defined union. However, there is no point in that and it is better
to just remove the union and the store parameters.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Oded Gabbay
639781dcab habanalabs/gaudi: add debugfs to DMA from the device
When trying to debug program, the user often needs to
dump large parts of the device's DRAM, which can reach to tens of GBs.
Because reading from the device's internal memory through the PCI BAR
is extremely slow, the debug can take hours.

Instead, we can provide the user to copy data through one of the DMA
engines. This will make the operation much faster.

Currently, only GAUDI is supported.

In GAUDI, we need to find a PCI DMA engine that is IDLE and set the
DMA as secured to be able to bypass our MMU as we currently don't
map the temporary buffer to the MMU.

Example bash one-line to dump entire HBM to file (~2 minutes):

for (( i=0x0; i < 0x800000000; i+=0x8000000 )); do \
printf '0x%x\n' $i | sudo tee /sys/kernel/debug/habanalabs/hl0/addr ; \
echo 0x8000000 | sudo tee /sys/kernel/debug/habanalabs/hl0/dma_size ; \
sudo cat /sys/kernel/debug/habanalabs/hl0/data_dma >> hbm.txt ; done

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
farah kassabri
e65448faf4 habanalabs/gaudi: sync stream add protection to SOB reset flow
Since we moved the SOB reset flow to workqueue and
not part of the fence release flow, we might reach a
scenario where new context is created while we in the middle
of resetting the SOB.
in such cases the reset may fail due to idle check.
This will mess up the streams sync since the SOB value is invalid.
so we protect this area with a mutex, to delay context creation.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Alon Mizrahi
cf39395034 habanalabs: add custom timeout flag per cs
There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Koby Elbaz
cd5def8020 habanalabs: improve utilization calculation
The new approach is based on the notion that the relative
current power consumption is in relation of proportionality
to device's true utilization.
Utilization info ranges between [0,100]%
Currently, dc_power values are hard-coded.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Ohad Sharabi
e8f9392a5c habanalabs: support legacy and new pll indexes
In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Ofir Bitton
8445dde1b9 habanalabs: move relevant datapath work outside cs lock
In order to shorten the time cs lock is being held, we move any
possible work outside of the cs lock.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
farah kassabri
2f6274e477 habanalabs: avoid soft lockup bug upon mapping error
Add a little sleep between page unmappings in case mapping of
large number of host pages failed, in order to
avoid soft lockup bug during the rollback.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Ofir Bitton
d661d79930 habanalabs/gaudi: Update async events header
Update with latest version from the Firmware team.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Ofir Bitton
f951eb08a9 habanalabs/gaudi: unsecure TPC cfg status registers
Unsecure relevant registers as TPC engine need access to
TPC status.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:24 +03:00
Oded Gabbay
12e66a1727 habanalabs/gaudi: always use single-msi mode
The device can get into deadlock in case it use indirect mode for MSI
interrupts (multi-msi) and have hard-reset during interrupt storm.

To prevent that, always use direct mode which means single-msi mode.

The F/W will prevent the host from writing to the indirect MSI
registers to prevent any malicious user from causing this scenario.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
2ea09537ad habanalabs/gaudi: reset device upon BMC request
In case the BMC of the devices' box wants to initiate a reset of
a specific device, it must go through driver.
Once driver will receive the request it will initiate a hard reset
flow.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
a5778d10a1 habanalabs: debugfs access to user mapped host addresses
In order to have a better debuggability we allow debugfs access
to user mmu mapped host memory. Non-user host memory access will be
rejected.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Yang Li
dd0a25c77a habanalabs: Switch to using the new API kobj_to_dev()
fixed the following coccicheck:
./drivers/misc/habanalabs/common/sysfs.c:347:60-61: WARNING opportunity
for kobj_to_dev()

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ohad Sharabi
99cb017e72 habanalabs: update hl_boot_if.h
Update to the latest version of the file as supplied by the F/W.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ohad Sharabi
e42a6400fb habanalabs: skip DISABLE PCI packet to FW on heartbeat
if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
d5eb8373b2 habanalabs: replace GFP_ATOMIC with GFP_KERNEL
As there are incorrect assumptions in which some of the
initialization and data path flows cannot sleep, most allocations
are being done using GFP_ATOMIC.
We modify the code to use GFP_ATOMIC only when realy needed, as
sleepable flow should use GFP_KERNEL.
In addition add a fallback to allocate memory using GFP_KERNEL,
once ATOMIC allocation fails.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
f209e5ad18 habanalabs/gaudi: update extended async event header
Update to the latest definition of the firmware

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Sagiv Ozeri
586f2caf0e habanalabs: return current power via INFO IOCTL
Add driver implementation for reading the current power from the device
CPU F/W.

Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Sagiv Ozeri
a4371c1a1e habanalabs: support HW blocks vm show
Improve "vm" debugfs node to print also the virtual addresses which are
currently mapped to HW blocks in the device.

Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
6a2f5d7098 habanalabs: use a single FW loading bringup flag
For simplicity, use a single bringup flag indicating which FW
binaries should loaded to device.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Oded Gabbay
366addb0c3 habanalabs: use correct define for 32-bit max value
Timeout in wait for interrupt is in 32-bit variable so we need to use
the correct maximum value to compare.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
ab5f5c3089 habanalabs: wait for interrupt support
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:23 +03:00
Ofir Bitton
2d44c6f6b3 habanalabs: enable all IRQs for user interrupt support
In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Ohad Sharabi
5d6a198f9d habanalabs: reset device in case of sync error
As the F/wW is the first to detect out of sync event, a new event is
added to notify the driver on such event. In which case the driver
performs hard reset.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Oded Gabbay
17b59dd339 habanalabs: change default CS timeout to 30 seconds
Because our graph contains network operations, we need to account
for delay in the network.

5 seconds timeout per CS is not enough to account for that.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Oded Gabbay
278b5f7acb habanalabs: print if device is used on FD close
Notify to the user that although he closed the FD, the device is
still in use because there are live CS and/or memory mappings (mmaps).

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Oded Gabbay
d3ee681afd habanalabs: reset_upon_device_release is for bring-up
Move the field to correct location in structure and remove comment.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Oded Gabbay
23c3efd1fb habanalabs: fail reset if device is not idle
After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Oded Gabbay
35862d1c99 habanalabs: reset after device is actually released
The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.

If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Ofir Bitton
8e9445a678 habanalabs: add reset support when user closes FD
In order to support command submissions that are done directly from
user space, the driver must perform soft reset once user closes its FD.
In case the soft reset fails or device is not idle, a hard reset should
be performed.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
farah kassabri
b6821b3c65 habanalabs: set max asid to 2
currently we support only 2 asids in all asics.
asid 0 for driver, and asic 1 for user.
no need to setup 1024 asids configurations at init phase.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09 14:09:22 +03:00
Ricardo Ribalda
dccfe25487 media: staging/intel-ipu3: Fix race condition during set_fmt
Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.

Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.

Cc: stable@vger.kernel.org
Fixes: ad91849996 ("media: staging/intel-ipu3: Fix set_fmt error handling")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:07:09 +02:00
Ricardo Ribalda
3630901933 media: staging/intel-ipu3: Fix memory leak in imu_fmt
We are losing the reference to an allocated memory if try. Change the
order of the check to avoid that.

Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e0 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:06:48 +02:00
Jiapeng Chong
4103369093 media: mxl692: remove impossible condition
Fix the following coverity warning:

This greater-than-or-equal-to-zero comparison of an unsigned value is
always true. "opcode >= 0".

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:05:43 +02:00
Arnd Bergmann
be8cd6cccf media: dvb-usb: avoid -Wempty-body warnings
Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/usb/dvb-usb/vp702x-fe.c: In function 'vp702x_fe_set_frontend':
drivers/media/usb/dvb-usb/vp702x-fe.c:190:46: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  190 |                 deb_fe("tuning succeeded.\n");
drivers/media/usb/dvb-usb/dtt200u.c: In function 'dtt200u_rc_query':
drivers/media/usb/dvb-usb/dtt200u.c:124:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  124 |                 deb_info("st->data: %*ph\n", 5, st->data);
drivers/media/usb/dvb-usb/m920x.c: In function 'm920x_rc_query':
drivers/media/usb/dvb-usb/m920x.c:207:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  207 |                 deb("Unknown rc key %02x\n", rc_state[1]);

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:05:25 +02:00
Arnd Bergmann
d6bed580eb media: flexcop: avoid -Wempty-body warning
Building with 'make W=1' shows many warnings -Wempty-body warnings like

drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");

drivers/media/usb/b2c2/flexcop-usb.c: In function 'flexcop_usb_process_frame':
drivers/media/usb/b2c2/flexcop-usb.c:357:79: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  357 |                                         deb_ts("not ts packet %*ph\n", 4, b+2);
      |                                                                               ^
drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
   35 |                 deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
      |                                                                                     ^

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:05:01 +02:00
Sean Young
49e851de7e media: ite-cir: probe of ITE8708 on ASUS PN50 fails
The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.

Link: https://www.spinics.net/lists/linux-media/msg177725.html

Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:04:25 +02:00
Andre Przywara
6d3e4a4beb media: dt-bindings: media: IR: Add H616 IR compatible string
Add the obvious compatible name to the existing IR binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.

On the way use enums to group all compatible devices together.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:03:56 +02:00
Hao Fang
d931392c8d media: rc: ir-hix5hd2: use the correct HiSilicon copyright
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.

Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:03:24 +02:00
Arnd Bergmann
799ddc0370 media: rc: remove zte zx ir driver
The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:03:08 +02:00
Pavel Skripkin
b7cd0da982 media: dvb-usb: fix memory leak in dvb_usb_adapter_init
syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().

for (n = 0; n < d->props.num_adapters; n++) {
....
	if ((ret = dvb_usb_adapter_stream_init(adap)) ||
		(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
		(ret = dvb_usb_adapter_frontend_init(adap))) {
		return ret;
	}
...
	d->num_adapters_initialized++;
...
}

In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:

	for (n = 0; n < d->num_adapters_initialized; n++)

So, allocated objects won't be freed.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:02:20 +02:00
Christian Hewitt
3ddcea9f7d media: rc: add keymaps for mecool-kii-pro/kiii-pro remotes
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:01:59 +02:00
Arnd Bergmann
0fa430e96d media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch
gcc-11 warns about the prototype not exactly matching the function
definition:

drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
  363 |                 u8 keybuf[5], u32 *event, int *state)
      |                 ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
                 from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
  490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
      |                                                                 ^~~~

Fixes: 776338e121 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:01:32 +02:00
Colin Ian King
7030a96bd9 media: dvb-frontends: Remove redundant error check on variable ret
An earlier commit removed a call to lgdt3306a_spectral_inversion and
omitted to remove the error return check. The check on ret is now
redundant and can be removed.

Addresses-Coverity: ("Logically dead code")

Fixes: d4a3fa6652 ("media: dvb-frontends: lgdt3306a.c: remove dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 13:00:59 +02:00
Hans Verkuil
a2e2c1b862 media: cobalt: drop static for sd_fmt
The struct v4l2_subdev_format sd_fmt cannot be static since it can be
written back by the subdev. Just have it on the stack.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 12:58:52 +02:00
Dinghao Liu
f1995d5e43 media: sun8i-di: Fix runtime PM imbalance in deinterlace_start_streaming
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 12:58:34 +02:00
Dinghao Liu
69306a947b media: platform: sti: Fix runtime PM imbalance in regs_show
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09 12:55:05 +02:00