Commit graph

1,013,453 commits

Author SHA1 Message Date
Dong Aisheng
6c4b264c70 PM / devfreq: imx8m-ddrc: Remove imx8m_ddrc_get_dev_status
Current driver actually does not support simple ondemand governor
as it's unable to provide device load information. So removing
the unnecessary callback to avoid confusing.
Right now the driver is using userspace governor by default.

polling_ms was also dropped as it's not needed for non-ondemand
governor.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
05f15314f0 PM / devfreq: Remove the invalid description for get_target_freq
First of all, no_central_polling was removed since
commit 7e6fdd4bad ("PM / devfreq: Core updates to support devices
which can idle")
Secondly, get_target_freq() is not only called only with update_devfreq()
notified by OPP now, but also min/max freq qos notifier.

So remove this invalid description now to avoid confusing.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
b19e13463a PM / devfreq: Check get_dev_status in devfreq_update_stats
Check .get_dev_status() in devfreq_update_stats in case it's abused
when a device does not provide it.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
5f104f9fc1 PM / devfreq: Fix the wrong set_freq path for userspace governor in Kconfig
Fix the wrong set_freq path for userspace governor in Kconfig.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Gaël PORTAY
0913507c10 dt-bindings: devfreq: rk3399_dmc: Remove references of unexistant defines
Those DDR related defines do not exist. Replace their references with
their numerical constant.

Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Enric Balletbo i Serra
62467a843e dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle.
The Rockchip DMC (Dynamic Memory Interface) needs to access to the PMU
general register files to know the DRAM type, so add a phandle to the
syscon that manages these registers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Krzysztof Kozlowski
fbf821ec63 PM / devfreq: rk3399_dmc: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Dong Aisheng
62453f1ba5 PM / devfreq: Use more accurate returned new_freq as resume_freq
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.

Fixes: 83f8ca45af ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:45 +09:00
Lukasz Luba
8b50a79957 PM / devfreq: Unlock mutex and free devfreq struct in error path
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.

Change the goto destination which frees the allocated memory.

Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:45 +09:00
Chanwoo Choi
75d1b0b667 Merge branch 'immutable-devfreq-v5.13-rc1' into devfreq-next 2021-04-08 13:13:09 +09:00
Pavel Begunkov
6ad7f2332e io_uring: clear F_REISSUE right after getting it
There are lots of ways r/w request may continue its path after getting
REQ_F_REISSUE, it's not necessarily io-wq and can be, e.g. apoll,
and submitted via  io_async_task_func() -> __io_req_task_submit()

Clear the flag right after getting it, so the next attempt is well
prepared regardless how the request will be executed.

Fixes: 230d50d448 ("io_uring: move reissue into regular IO path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/11dcead939343f4e27cab0074d34afcab771bfa4.1617842918.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-07 22:10:19 -06:00
Anirudh Ghayal
7b1222b224 extcon: qcom-spmi: Add support for VBUS detection
VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.

Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:10:16 +09:00
Guru Das Srinagesh
4fcdd677c4 bindings: pm8941-misc: Add support for VBUS detection
Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.

Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:10:16 +09:00
Guru Das Srinagesh
dd6f5afb1c bindings: pm8941-misc: Convert bindings to YAML
Convert bindings from txt to YAML.

Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:10:16 +09:00
Nikita Travkin
e3f6032909 extcon: sm5502: Detect OTG when USB_ID is connected to ground
In it's curent state this driver ignores OTG adapters with ID pin
connected to ground. This commit adds a check to set extcon into
host mode when such OTG adapter is connected.

Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:10:16 +09:00
Timon Baetz
17e8ff013e extcon: max8997: Add CHGINS and CHGRM interrupt handling
This allows the MAX8997 charger to set the current limit depending on
the detected extcon charger type.

Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:10:16 +09:00
Dave Airlie
9c0fed84d5 Merge tag 'drm-intel-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Add support for FBs requiring a power-of-two stride padding (Imre)

Refactoring:
- Disassociate display version from gen (Matt)
- Refactor legacy DP and HDMI code to separate files (Ville)
- Refactor FB plane code to a separate file (Imre)
- Refactor VBT child device info parsing and usage (Jani)
- Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani)

Fixes:
- DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre)
- HDCP fixes (Anshuman)
- DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit)
- Set HDA link parameters in driver (Kai)
- Fix enabled_planes bitmask (Ville)
- Fix transposed arguments to skl_plane_wm_level() (Ville)
- Stop adding planes to the commit needlessly (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com
2021-04-08 14:02:21 +10:00
Qinglang Miao
769738fc49 soc: qcom: pdr: Fix error return code in pdr_register_listener
Fix to return the error code -EREMOTEIO from pdr_register_listener
rather than 0.

Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201125065034.154217-1-miaoqinglang@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-07 22:31:39 -05:00
Dave Airlie
41d1d0c51f Merge tag 'drm-intel-gt-next-2021-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:

- Prepare for local/device memory support on DG1 by starting
  to use it for kernel internal allocations: context, ring
  and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)

- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)

- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
2021-04-08 12:46:12 +10:00
Dave Airlie
0c7997179a Mediatek DRM Next for Linux 5.13
1. Fine tune the line time for EOTp.
 2. Add support mt8192 dpi.
 3. Make crtc config-updating atomic.
 4. Don't support hdmi connector creation.
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmBqxRIYHGNodW5rdWFu
 Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4kWdEQAIZPQks9r5kWnRQJoh4EiiqU
 vupem3HbmGk2dtmJhZVr2URgmWCFeFPJ8sImN7qmECgBlGUH+0DW26+o3/nWUSjl
 6wCWGl7RSPigsvoVkuJHKFnQMJTVAuaPjF77rs/TyExBxIk5vIwDvxOTCRaairyT
 j90V78Wjx3EtSfTgw/RY3MSaLWmBN48VENRiQepM5AahG+DS3wg/eYsW6yNd0aM5
 utxyhkH+25donMr+Dhs6XbqN+c5b90AiL+YdXh4oOZfncds9+FIwJ6/n8RHImBoE
 gRo02AjewHjwcg60xcbn+hzH5ezoqUxjSbv5OH8IRd2IN03LYpQRzBEr2+Qijm5I
 zO1Yg9n9pF8VAKXj60n1PMxfd6yRPAFYRHMKgotSwI5APSOA7oe6bNmK3JuL0XEy
 SgvFXXe9OSqFbu+ZSXWuX/CCLfUH94adAMs9UJTLMHVxCGdiBvppdKAV/kkrIs7z
 qLI/697ZMbszYZzw2OBzCY5DKEEPgs9rcH4VfZiwr4n+bvOO2+PLxy3Avg+/kVJv
 gsfMjM5kU/HUvmPkXULvmEYl3ED2G6YOlNU6WhYyHw7sc/epYv4iCt7bL5EHIwcF
 Om6vxIASWctSZoig71p7r+OvymfHDY/s+u/oWwQXTwOjBn0aVCLqP4JWTag5pYB1
 RmiKV3Ch0iyuWEP2Xw/H
 =VClB
 -----END PGP SIGNATURE-----

Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.13

1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-04-08 12:42:14 +10:00
Maciek Borzecki
0fc9322ab5 cifs: escape spaces in share names
Commit 653a5efb84 ("cifs: update super_operations to show_devname")
introduced the display of devname for cifs mounts. However, when mounting
a share which has a whitespace in the name, that exact share name is also
displayed in mountinfo. Make sure that all whitespace is escaped.

Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
CC: <stable@vger.kernel.org> # 5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-04-07 21:30:27 -05:00
Wan Jiabing
d135be0a7f fs: cifs: Remove unnecessary struct declaration
struct cifs_readdata is declared twice. One is declared
at 208th line.
And struct cifs_readdata is defined blew.
The declaration here is not needed. Remove the duplicate.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-04-07 21:30:27 -05:00
Shyam Prasad N
4e456b30f7 cifs: On cifs_reconnect, resolve the hostname again.
On cifs_reconnect, make sure that DNS resolution happens again.
It could be the cause of connection to go dead in the first place.

This also contains the fix for a build issue identified by Intel bot.
Reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: <stable@vger.kernel.org> # 5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-04-07 21:29:36 -05:00
Jonathan Neuschäfer
8a8cba741b ARM: dts: Add board-specific compatible string to npcm750-evb devicetree
According to the revised binding, the devicetree needs a board-specific
compatible string.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20210320164023.614059-2-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:33:02 +09:30
Jonathan Neuschäfer
281192c4db dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML
The general trend is to have devicetree bindings in YAML format, to
allow automatic validation of bindings and devicetrees.

Convert the NPCM SoC family's binding to YAML before it accumulates more
entries.

The nuvoton,npcm750-evb compatible string is introduced to keep the
structure of the binding a little simpler.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210320164023.614059-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:33:02 +09:30
George Hung
ee33e2fb3d ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree
Add the device tree for the Quanta GBS BMC based on NPCM730 SoC.

Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:21:05 +09:30
Jolly Shah
176ddd8917 scsi: libsas: Reset num_scatter if libata marks qc as NODATA
When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.

Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47 ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-07 21:48:38 -04:00
Nichole Wang
62b8a07b06 ARM: dts: aspeed: mihawk: Add GPIO line names
Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:15:33 +09:30
Eddie James
7f03894a65 ARM: dts: aspeed: Add Rainier 1S4U machine
The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:57 +09:30
Joel Stanley
7aaa2074d5 ARM: dts: aspeed: everest: Add size/address cells
The gpio and fan nodes reg properties cause dtc to emit a noisy warning
about relying on default sizes.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Eddie James
6cebf3764f ARM: dts: aspeed: everest: Enable fan watchdog
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.

Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Eddie James
5dbbacd43f ARM: dts: aspeed: everest: Add RTC
Add the RTC at the appropriate I2C bus and address.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Alpana Kumari
3c00ebf08a ARM: dts: aspeed: everest: GPIOs support
This commit adds support for-
- Presence GPIOs
- I2C control GPIOs
- Op-panel GPIOs (ex PHR)

Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Jim Wright
22db69f04c ARM: dts: aspeed: everest: Add UCD90320 power sequencer
Add UCD90320 chip to Everest device tree.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Brandon Wyman
d66d720b64 ARM: dts: aspeed: everest: Add power supply i2c devices
Add the i2c/pmbus power supply devices to the everest device tree.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Matthew Barth
baf1fb2668 ARM: dts: aspeed: everest: Add pca9552 fan presence
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.

Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Eddie James
d9406d17e9 ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines
Add additional CFAMs and re-number the existing engines for the
extra processors present on the Everest system.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Matthew Barth
7313cde52a ARM: dts: aspeed: everest: Add max31785 fan controller device
Add the max31785 configuration at address 0x52 on i2c14 behind mux0
channel 3.

Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:56 +09:30
Priyanga Ramasamy
03b5e43f7d ARM: dts: aspeed: everest: Add I2C components
Tested and able to bound the devices with i2c driver.

Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:13:55 +09:30
Eddie James
0d7208d908 ARM: dts: aspeed: rainier 4U: Fix fan configuration
The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:12:13 +09:30
Joel Stanley
510ed4320a ARM: dts: aspeed: rainier: Add missing fan nodes
The Maxim fan controller has six fans attached. Two of these were
missing from the description.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:43 +09:30
Eddie James
2f9a9f3c93 ARM: dts: aspeed: rainier: Enable fan watchdog
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.

Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:42 +09:30
Alpana Kumari
8be44de6f2 ARM: dts: aspeed: rainier: Add presence GPIOs
This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.

Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:42 +09:30
Eddie James
79432ed403 ARM: dts: aspeed: rainier: Add additional processor CFAMs
Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:42 +09:30
Brandon Wyman
44ab6f2853 ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:42 +09:30
Vishwanatha Subbanna
44a2c58e79 ARM: dts: aspeed: rainier: Add directly controlled LEDs
These LEDs are directly connected to the BMC's GPIO bank.

Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:42 +09:30
Zev Weiss
2b81613ce4 ARM: dts: aspeed: Add ASRock E3C246D4I BMC
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.

This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08 11:07:37 +09:30
Mike Christie
0dcf8febcb scsi: iscsi: Fix iSCSI cls conn state
In commit 9e67600ed6 ("scsi: iscsi: Fix race condition between login and
sync thread") I missed that libiscsi was now setting the iSCSI class state,
and that patch ended up resetting the state during conn stoppage and using
the wrong state value during ep_disconnect. This patch moves the setting of
the class state to the class module and then fixes the two issues above.

Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com
Fixes: 9e67600ed6 ("scsi: iscsi: Fix race condition between login and sync thread")
Cc: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-07 21:30:59 -04:00
Quanyang Wang
394cdb69a3 clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.

There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
   should be set to FRAC mode. Then zynqmp_pll_set_mode is called
   to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
   ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
   called to try to enable VPLL_INT pll. Because of 1), the function
   zynqmp_pll_enable just returns without doing anything after checking
   that this pll has been enabled.

In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.

Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-07 18:09:35 -07:00
Quanyang Wang
d7fd3f9f53 clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.

Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-07 18:09:23 -07:00