Commit graph

1,013,453 commits

Author SHA1 Message Date
Christoph Hellwig
fc1b662050 iommu/amd: Move a few prototypes to include/linux/amd-iommu.h
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition.  Also amdkfd has started
using a few of them using externs in a .c file.  End that misery by
moving the prototypes to the proper header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 11:14:55 +02:00
Christoph Hellwig
b29a1fc759 iommu/amd: Remove a few unused exports
Remove exports for functions that are only used in the AMD IOMMU driver
itself, or the also always builtin perf events support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 11:14:51 +02:00
Christoph Hellwig
42fa2bda18 iommu/amd: Remove the unused amd_iommu_get_v2_domain function
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-3-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 11:14:47 +02:00
Christoph Hellwig
d151c85c52 iommu/amd: Remove the unused device errata code
The device errata mechism is entirely unused, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 11:14:43 +02:00
Loic Poulain
11134390d7 bus: mhi: pci_generic: Add FIREHOSE channels
When device enters flash programmer context (FP), it exposes firehose
protocol through the EDL dedicated channels.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617784860-32439-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07 14:37:23 +05:30
Christoph Hellwig
7876a83ffe iommu: remove iommu_domain_{get,set}_attr
Remove the now unused iommu attr infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210401155256.298656-21-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
4fc52b81e8 iommu: remove DOMAIN_ATTR_IO_PGTABLE_CFG
Use an explicit set_pgtable_quirks method instead that just passes
the actual quirk bitmask instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-20-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Robin Murphy
a250c23f15 iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.

This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86.  As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.

[ported on top of the other iommu_attr changes and added a few small
 missing bits]

Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
3189713a1b iommu: remove iommu_set_cmd_line_dma_api and iommu_cmd_line_dma_api
Don't obsfucate the trivial bit flag check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210401155256.298656-18-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
7e14754778 iommu: remove DOMAIN_ATTR_NESTING
Use an explicit enable_nesting method instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
bc9a05eef1 iommu: remove DOMAIN_ATTR_GEOMETRY
The geometry information can be trivially queried from the iommu_domain
struture.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
9fb5fad562 iommu: remove DOMAIN_ATTR_PAGING
DOMAIN_ATTR_PAGING is never used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-15-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:53 +02:00
Christoph Hellwig
57fa44be7f iommu/fsl_pamu: hardcode the window address and size in pamu_config_ppaace
The win_addr and win_size parameters are always set to 0 and 1 << 36
respectively, so just hard code them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-14-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
151f9414b8 iommu/fsl_pamu: remove the rpn and snoop_id arguments to pamu_config_ppaac
These are always wired to fixed values, so don't bother passing them as
arguments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-13-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
fd78696ece iommu/fsl_pamu: remove the snoop_id field
The snoop_id is always set to ~(u32)0.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-12-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
7d61cb6ff0 iommu/fsl_pamu: enable the liodn when attaching a device
Instead of a separate call to enable all devices from the list, just
enable the liodn once the device is attached to the iommu domain.

This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
85e362ca46 iommu/fsl_pamu: merge handle_attach_device into fsl_pamu_attach_device
No good reason to split this functionality over two functions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-10-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
dae7747ae4 iommu/fsl_pamu: merge pamu_set_liodn and map_liodn
Merge the two fuctions that configure the ppaace into a single coherent
function.  I somehow doubt we need the two pamu_config_ppaace calls,
but keep the existing behavior just to be on the safe side.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-9-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
4eeb96f6ef iommu/fsl_pamu: replace DOMAIN_ATTR_FSL_PAMU_STASH with a direct call
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
376dfd2a2f iommu/fsl_pamu: remove ->domain_window_enable
The only thing that fsl_pamu_window_enable does for the current caller
is to fill in the prot value in the only dma_window structure, and to
propagate a few values from the iommu_domain_geometry struture into the
dma_window.  Remove the dma_window entirely, hardcode the prot value and
otherwise use the iommu_domain_geometry structure instead.

Remove the now unused ->domain_window_enable iommu method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
ba58d1216e iommu/fsl_pamu: remove support for multiple windows
The only domains allocated forces use of a single window.  Remove all
the code related to multiple window support, as well as the need for
qman_portal to force a single window.

Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:52 +02:00
Christoph Hellwig
c822450807 iommu/fsl_pamu: merge iommu_alloc_dma_domain into fsl_pamu_domain_alloc
Keep the functionality to allocate the domain together.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:51 +02:00
Christoph Hellwig
f7641bb71d iommu/fsl_pamu: remove support for setting DOMAIN_ATTR_GEOMETRY
The default geometry is the same as the one set by qman_port given
that FSL_PAMU depends on having 64-bit physical and thus DMA addresses.

Remove the support to update the geometry and remove the now pointless
geom_size field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:51 +02:00
Christoph Hellwig
392825e0c7 iommu/fsl_pamu: remove fsl_pamu_get_domain_attr
None of the values returned by this function are ever queried.  Also
remove the DOMAIN_ATTR_FSL_PAMUV1 enum value that is not otherwise used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-3-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:51 +02:00
Christoph Hellwig
47685cb202 iommu: remove the unused domain_window_disable method
domain_window_disable is wired up by fsl_pamu, but never actually called.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:56:51 +02:00
Jean-Philippe Brucker
cdf315f907 iommu/arm-smmu-v3: Maintain a SID->device structure
When handling faults from the event or PRI queue, we need to find the
struct device associated with a SID. Add a rb_tree to keep track of
SIDs.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210401154718.307519-8-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:29 +02:00
Jean-Philippe Brucker
fc36479db7 iommu: Add a page fault handler
Some systems allow devices to handle I/O Page Faults in the core mm. For
example systems implementing the PCIe PRI extension or Arm SMMU stall
model. Infrastructure for reporting these recoverable page faults was
added to the IOMMU core by commit 0c830e6b32 ("iommu: Introduce device
fault report API"). Add a page fault handler for host SVA.

IOMMU driver can now instantiate several fault workqueues and link them
to IOPF-capable devices. Drivers can choose between a single global
workqueue, one per IOMMU device, one per low-level fault queue, one per
domain, etc.

When it receives a fault event, most commonly in an IRQ handler, the
IOMMU driver reports the fault using iommu_report_device_fault(), which
calls the registered handler. The page fault handler then calls the mm
fault handler, and reports either success or failure with
iommu_page_response(). After the handler succeeds, the hardware retries
the access.

The iopf_param pointer could be embedded into iommu_fault_param. But
putting iopf_param into the iommu_param structure allows us not to care
about ordering between calls to iopf_queue_add_device() and
iommu_register_device_fault_handler().

Tested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-7-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:29 +02:00
Jean-Philippe Brucker
0860788df7 uacce: Enable IOMMU_DEV_FEAT_IOPF
The IOPF (I/O Page Fault) feature is now enabled independently from the
SVA feature, because some IOPF implementations are device-specific and
do not require IOMMU support for PCIe PRI or Arm SMMU stall.

Enable IOPF unconditionally when enabling SVA for now. In the future, if
a device driver implementing a uacce interface doesn't need IOPF
support, it will need to tell the uacce module, for example with a new
flag.

Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-6-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:29 +02:00
Jean-Philippe Brucker
9003351cb6 iommu/vt-d: Support IOMMU_DEV_FEAT_IOPF
Allow drivers to query and enable IOMMU_DEV_FEAT_IOPF, which amounts to
checking whether PRI is enabled.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:29 +02:00
Jean-Philippe Brucker
34b48c704d iommu: Separate IOMMU_DEV_FEAT_IOPF from IOMMU_DEV_FEAT_SVA
Some devices manage I/O Page Faults (IOPF) themselves instead of relying
on PCIe PRI or Arm SMMU stall. Allow their drivers to enable SVA without
mandating IOMMU-managed IOPF. The other device drivers now need to first
enable IOMMU_DEV_FEAT_IOPF before enabling IOMMU_DEV_FEAT_SVA. Enabling
IOMMU_DEV_FEAT_IOPF on its own doesn't have any effect visible to the
device driver, it is used in combination with other features.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:28 +02:00
Jean-Philippe Brucker
434b73e61c iommu/arm-smmu-v3: Use device properties for pasid-num-bits
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:28 +02:00
Jean-Philippe Brucker
0d35309ab5 iommu: Fix comment for struct iommu_fwspec
Commit 986d5ecc56 ("iommu: Move fwspec->iommu_priv to struct
dev_iommu") removed iommu_priv from fwspec and commit 5702ee2418
("ACPI/IORT: Check ATS capability in root complex nodes") added @flags.
Update the struct doc.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:54:28 +02:00
Qi Liu
3e84f878b5 iommu/amd: Remove duplicate check of pasids
Remove duplicate check of pasids in amd_iommu_domain_enable_v2(), as it
has been guaranteed in amd_iommu_init_device().

Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1617275956-4467-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:47:41 +02:00
Chunyan Zhang
a56af062ae iommu/sprd: Fix parameter type warning
The second parameter of clk_get_optional() is "const char *", so use NULL
instead of integer 0 to fix a sparse warning like:

">> drivers/iommu/sprd-iommu.c:456:42: sparse: sparse: Using plain integer as NULL pointer"

Also this patch changes to use the resource-managed variant of
clk_get_optional(), then there's no need to add clk_put() which
is missed in the current driver.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210331031645.1001913-1-zhang.lyra@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:43:49 +02:00
Lu Baolu
6c00612d0c iommu/vt-d: Report right snoop capability when using FL for IOVA
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.

Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:41:30 +02:00
Yong Wu
18d8c74ec5 iommu/mediatek: Allow building as module
The IOMMU in many SoC depends on the MM clocks and power-domain which
are device_initcall normally, thus the subsys_init here is not helpful.
This patch switches it to module_platform_driver which also allow the
driver built as module.

Correspondingly switch the config to tristate, and update the
iommu_ops's owner.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210326032337.24578-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:33:58 +02:00
Yong Wu
8de000cf02 iommu/mediatek-v1: Allow building as module
This patch only adds support for building the IOMMU-v1 driver as module.
Correspondingly switch the config to tristate and update the iommu_ops's
owner to THIS_MODULE.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210326032337.24578-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:33:58 +02:00
John Garry
6e1ea50a06 iommu: Stop exporting free_iova_fast()
Function free_iova_fast() is only referenced by dma-iommu.c, which can
only be in-built, so stop exporting it.

This was missed in an earlier tidy-up patch.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1616675401-151997-5-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:30:48 +02:00
John Garry
149448b353 iommu: Delete iommu_dma_free_cpu_cached_iovas()
Function iommu_dma_free_cpu_cached_iovas() no longer has any caller, so
delete it.

With that, function free_cpu_cached_iovas() may be made static.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1616675401-151997-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:30:47 +02:00
John Garry
363f266eef iommu/vt-d: Remove IOVA domain rcache flushing for CPU offlining
Now that the core code handles flushing per-IOVA domain CPU rcaches,
remove the handling here.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1616675401-151997-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:27:27 +02:00
John Garry
f598a497bc iova: Add CPU hotplug handler to flush rcaches
Like the Intel IOMMU driver already does, flush the per-IOVA domain
CPU rcache when a CPU goes offline - there's no point in keeping it.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1616675401-151997-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07 10:27:27 +02:00
Martin Kaiser
b92ed9dc2b staging: rtl8188eu: remove an obsolete comment
This driver does not set URB_ZERO_PACKET.

The rtl8188eu driver that's available from Realtek/Edimax has some
commented-out code that sets zero packet. It was removed from this
driver before it was imported.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
057a5a8038 staging: rtl8188eu: clean up usb_write32
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
cecaae74ea staging: rtl8188eu: clean up usb_write16
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
4f178eeb0d staging: rtl8188eu: clean up usb_write8
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
e8f44d356e staging: rtl8188eu: clean up usb_read32
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
0009261516 staging: rtl8188eu: clean up usb_read16
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
cc23e68fdf staging: rtl8188eu: clean up usb_read8
Remove unnecessary variable, summarize declaration and assignment.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
788fde0310 staging: rtl8188eu: use actual request type as parameter
At the moment, usbctrl_vendorreq's requesttype parameter must be set to 1
for reading and 0 for writing. It's then converted to the actual
bmRequestType for the USB control request. We can simplify the code and
avoid this conversion if the caller passes the actual bmRequestType.

We already have defines for the read and write request types. Move them to
usb_ops_linux.c, they're used only inside this file. Replace the numeric
values with USB constants to make their meaning clearer.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00
Martin Kaiser
3d0be94f62 staging: rtl8188eu: ctrl vendor req index is not used
The index for rtl8188eu's vendor-specific control requests is not used.
Remove the index parameter from usbctrl_vendorreq and pass index 0 to
usb_control_msg.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07 10:24:47 +02:00