Start the clock during initialization, doing this explicitly
will add more clarity when we are adding clock stop feature.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210330144719.13284-5-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
version 1.5.1 and higher IPs of this controller required to set
continue execution on ignored command flag. This patch sets this flag.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210330144719.13284-4-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some of the transport parameters derived from device tree
are not fully parsed by the driver.
This patch adds support to parse those missing parameters.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210330144719.13284-3-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some of the parameters for data ports are not applicable or not implemented
in IP. So mark them as invalid/not applicable in DT so that controller is
aware of this.
Add comment to these bindings to provide more clarity on the values!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210330144719.13284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Prevent the TDP MMU from yielding when zapping a gfn range during NX
page recovery. If a flush is pending from a previous invocation of the
zapping helper, either in the TDP MMU or the legacy MMU, but the TDP MMU
has not accumulated a flush for the current invocation, then yielding
will release mmu_lock with stale TLB entries.
That being said, this isn't technically a bug fix in the current code, as
the TDP MMU will never yield in this case. tdp_mmu_iter_cond_resched()
will yield if and only if it has made forward progress, as defined by the
current gfn vs. the last yielded (or starting) gfn. Because zapping a
single shadow page is guaranteed to (a) find that page and (b) step
sideways at the level of the shadow page, the TDP iter will break its loop
before getting a chance to yield.
But that is all very, very subtle, and will break at the slightest sneeze,
e.g. zapping while holding mmu_lock for read would break as the TDP MMU
wouldn't be guaranteed to see the present shadow page, and thus could step
sideways at a lower level.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-4-seanjc@google.com>
[Add lockdep assertion. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Honor the "flush needed" return from kvm_tdp_mmu_zap_gfn_range(), which
does the flush itself if and only if it yields (which it will never do in
this particular scenario), and otherwise expects the caller to do the
flush. If pages are zapped from the TDP MMU but not the legacy MMU, then
no flush will occur.
Fixes: 29cf0f5007 ("kvm: x86/mmu: NX largepage recovery for TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-3-seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When flushing a range of GFNs across multiple roots, ensure any pending
flush from a previous root is honored before yielding while walking the
tables of the current root.
Note, kvm_tdp_mmu_zap_gfn_range() now intentionally overwrites its local
"flush" with the result to avoid redundant flushes. zap_gfn_range()
preserves and return the incoming "flush", unless of course the flush was
performed prior to yielding and no new flush was triggered.
Fixes: 1af4a96025 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Building kvm module out-of-source with,
make -C $SRC O=$BIN M=arch/x86/kvm
fails to find "irq.h" as the include dir passed to cflags-y does not
prefix the source dir. Fix this by prefixing $(srctree) to the include
dir path.
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <20210324124347.18336-1-sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hardware_disable_test produces 512 snippets like
...
main: [511] waiting semaphore
run_test: [511] start vcpus
run_test: [511] all threads launched
main: [511] waiting 368us
main: [511] killing child
and this doesn't have much value, let's print this info with pr_debug().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323104331.1354800-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs are only available when
X86_FEATURE_PERFCTR_CORE CPUID bit was exposed to the guest. KVM, however,
allows these MSRs unconditionally because kvm_pmu_is_valid_msr() ->
amd_msr_idx_to_pmc() check always passes and because kvm_pmu_set_msr() ->
amd_pmu_set_msr() doesn't fail.
In case of a counter (CTRn), no big harm is done as we only increase
internal PMC's value but in case of an eventsel (CTLn), we go deep into
perf internals with a non-existing counter.
Note, kvm_get_msr_common() just returns '0' when these MSRs don't exist
and this also seems to contradict architectural behavior which is #GP
(I did check one old Opteron host) but changing this status quo is a bit
scarier.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323084515.1346540-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_write_tsc() was renamed and made static since commit 0c899c25d7
("KVM: x86: do not attempt TSC synchronization on guest writes"). Remove
its unused declaration.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20210326070334.12310-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_msr_ignored_check function never uses vcpu argument. Clean up the
function and invokers.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <20210313051032.4171-1-lihaiwei.kernel@gmail.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210325122949.1433271-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are code paths that rely on zero_pfn to be fully initialized
before core_initcall. For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput. If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:
BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1
Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:
1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
kobject_uevent_env+0x7e4/0x7ec
kset_register+0x68/0x88
bus_register+0xdc/0x34c
subsys_virtual_register+0x34/0x78
wq_sysfs_init+0x1c/0x4c
do_one_initcall+0x50/0x1a8
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x100
ret_from_kernel_thread+0x14/0x1c
2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
kernel_execve asynchronously.
3. Memory allocations in kernel_execve cause a page fault, bumping the
MM reference counter:
add_mm_counter_fast+0xb4/0xc0
handle_mm_fault+0x6e4/0xea0
__get_user_pages.part.78+0x190/0x37c
__get_user_pages_remote+0x128/0x360
get_arg_page+0x34/0xa0
copy_string_kernel+0x194/0x2a4
kernel_execve+0x11c/0x298
call_usermodehelper_exec_async+0x114/0x194
4. In case zero_pfn has not been initialized yet, zap_pte_range does
not decrement the MM_ANONPAGES RSS counter and the BUG message is
triggered shortly afterwards when __mmdrop checks the ref counters:
__mmdrop+0x98/0x1d0
free_bprm+0x44/0x118
kernel_execve+0x160/0x1d8
call_usermodehelper_exec_async+0x114/0x194
ret_from_kernel_thread+0x14/0x1c
To avoid races such as described above, initialize init_zero_pfn at
early_initcall level. Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.
Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang warns about using the %h format modifier to truncate an
integer:
drivers/platform/chrome/cros_ec_typec.c:1031:3: error: format specifies type 'unsigned char' but the argument has type 'unsigned int' [-Werror,-Wformat]
typec->pd_ctrl_ver);
^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:131:47: note: expanded from macro 'dev_dbg'
dev_printk(KERN_DEBUG, dev, dev_fmt(fmt), ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
Use an explicit bit mask to limit the number to its lower eight bits
instead.
Fixes: ad7c0510c9 ("platform/chrome: cros_ec_typec: Update port info from EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210322115602.4003221-1-arnd@kernel.org
In a couple of call sites, we use the same pattern of checking for a
partner or cable device before attempting to remove it. Simplify this by
moving those checks into the remove functions.
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210319015103.3751672-1-pmalani@chromium.org
Eliminate the following coccicheck warning:
./drivers/platform/chrome/wilco_ec/telemetry.c:259:1-17: WARNING:
telem_fops: .read() and .write() have stream semantic; safe to change
nonseekable_open -> stream_open.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1612688918-63132-1-git-send-email-yang.lee@linux.alibaba.com
Maciej Fijalkowski says:
====================
Changes since v4 (all in patch 6):
- do not close potentially invalid bpf_link fd (Toke)
- fix misspelling in label (Toke)
- mask out XDP_FLAGS_UPDATE_IF_NOEXIST and XDP_FLAGS_REPLACE explicitly when
creating bpf_link (Toke)
Changes since v3:
- do not unload netlink-based XDP prog when updating map elem failed and
current socket was not the creator of XDP resources (Toke)
- pull out code paths based on prog_id value within __xsk_setup_xdp_prog
so that teardown in case of error at any point is more clear
Changes since v2:
- fix c&p failure in veth's get_channels implementation (Magnus)
- provide a backward compatibilty if bpf_link is not supported (Andrii)
- check for a link type while looking up existing bpf_links (Andrii)
Changes since v1:
- selftests improvements and test case for bpf_link persistence itself
- do not unload netlink-based prog when --force flag is set (John)
- simplify return semantics in xsk_link_lookup (John)
v4: https://lore.kernel.org/bpf/20210326230938.49998-1-maciej.fijalkowski@intel.com/
v3: https://lore.kernel.org/bpf/20210322205816.65159-1-maciej.fijalkowski@intel.com/
v2: https://lore.kernel.org/bpf/20210311152910.56760-1-maciej.fijalkowski@intel.com/
v1: https://lore.kernel.org/bpf/20210215154638.4627-1-maciej.fijalkowski@intel.com/
--------------------------------------------------
This set is another approach towards addressing the below issue:
// load xdp prog and xskmap and add entry to xskmap at idx 10
$ sudo ./xdpsock -i ens801f0 -t -q 10
// add entry to xskmap at idx 11
$ sudo ./xdpsock -i ens801f0 -t -q 11
terminate one of the processes and another one is unable to work due to
the fact that the XDP prog was unloaded from interface.
Previous attempt was, to put it mildly, a bit broken, as there was no
synchronization between updates to additional map, as Bjorn pointed out.
See https://lore.kernel.org/netdev/20190603131907.13395-5-maciej.fijalkowski@intel.com/
In the meantime bpf_link was introduced and it seems that it can address
the issue of refcounting the XDP prog on interface.
Although the bpf_link is the meat of the set, selftests improvements are a
bigger part of it. Overall, we've been able to reduce the complexity of xsk
selftests by removing a bunch of synchronization resources and
simplifying logic and structs.
Last but not least, for multiqueue veth working with AF-XDP, ethtool's
get_channels API needs to be implemented, so it's also included in that
set.
Note also that in order to make it work, a commit from bpf tree:
veth: store queue_mapping independently of XDP prog presence
https://lore.kernel.org/bpf/20210303152903.11172-1-maciej.fijalkowski@intel.com/
is needed.
Thanks,
Maciej
Björn Töpel (3):
selftests: xsk: remove thread attribute
selftests: xsk: Remove mutex and condition variable
selftests: xsk: Remove unused defines
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a test that is supposed to verify the persistence of BPF
resources based on underlying bpf_link usage.
Test will:
1) create and bind two sockets on queue ids 0 and 1
2) run a traffic on queue ids 0
3) remove xsk sockets from queue 0 on both veth interfaces
4) run a traffic on queues ids 1
Running traffic successfully on qids 1 means that BPF resources were
not removed on step 3).
In order to make it work, change the command that creates veth pair to
have the 4 queue pairs by default.
Introduce the arrays of xsks and umems to ifobject struct but keep a
pointers to single entities, so rest of the logic around Rx/Tx can be
kept as-is.
For umem handling, double the size of mmapped space and split that
between the two sockets.
Rename also bidi_pass to a variable 'second_step' of a boolean type as
it's now used also for the test that is introduced here and it doesn't
have anything in common with bi-directional testing.
Drop opt_queue command line argument as it wasn't working before anyway.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-15-maciej.fijalkowski@intel.com
Libbpf's xsk part calls get_channels() API to retrieve the queue count
of the underlying driver so that XSKMAP is sized accordingly.
Implement that in veth so multi queue scenarios can work properly.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-14-maciej.fijalkowski@intel.com
Although thread_common_ops() are called in both Tx and Rx threads,
testapp_validate() will not spawn Tx thread until Rx thread signals that
it has finished its initialization via condition variable.
Therefore, locking in thread_common_ops is not needed and furthermore Tx
thread does not have to spin on atomic variable.
Note that this simplification wouldn't be possible if there would still
be a common worker thread.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-13-maciej.fijalkowski@intel.com
Currently, there is a testapp_sockets() that acts like a wrapper around
testapp_validate() and it is called for bidi and teardown test types.
Other test types call testapp_validate() directly.
Split testapp_sockets() onto two separate functions so a bunch of bidi
specific logic can be moved there and out of testapp_validate() itself.
Introduce function pointer to ifobject struct which will be used for
assigning the Rx/Tx function that is assigned to worker thread. Let's
also have a global ifobject Rx/Tx pointers so it's easier to swap the
vectors on a second run of a bi-directional test. Thread creation now is
easey to follow.
switching_notify variable is useless, info about vector switch can be
printed based on bidi_pass state.
Last but not least, init/destroy synchronization variables only once,
not per each test.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-12-maciej.fijalkowski@intel.com
Tx thread needs to be started after the Rx side is fully initialized so
that packets are not xmitted until xsk Rx socket is ready to be used.
It can be observed that atomic variable spinning_tx is not checked from
Rx side in any way, so thread_common_ops can be modified to only address
the spinning_rx. This means that spinning_tx can be removed altogheter.
signal_tx_condition is never utilized, so simply remove it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-11-maciej.fijalkowski@intel.com
Let's a have a separate Tx/Rx worker threads instead of a one common
thread packed with Tx/Rx specific checks.
Move mmap for umem buffer space and a switch_namespace() call to
thread_common_ops.
This also allows for a bunch of simplifactions that are the subject of
the next commits. The final result will be a code base that is much
easier to follow.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-10-maciej.fijalkowski@intel.com
Currently, there is a dedicated thread for following remote ns operations:
- grabbing the ifindex of the interface moved to remote netns
- removing xdp prog from that interface
With bpf_link usage in place, this can be simply omitted, so remove
mentioned thread, as BPF resources will be managed by bpf_link itself,
so there's no further need for creating the thread that will switch to
remote netns and do the cleanup.
Keep most of the logic for switching the ns, though, but make
switch_namespace() return the fd so that it will be possible to close it
at the process termination time. Get rid of logic around making sure
that it's possible to switch ns in validate_interfaces().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-9-maciej.fijalkowski@intel.com
With the introduction of bpf_link in xsk's libbpf part, there's no
further need for explicit unload of prog on xdpsock's termination. When
process dies, the bpf_link's refcount will be decremented and resources
will be unloaded/freed under the hood in case when there are no more
active users.
While at it, don't dump stats on error path.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-8-maciej.fijalkowski@intel.com
Currently, if there are multiple xdpsock instances running on a single
interface and in case one of the instances is terminated, the rest of
them are left in an inoperable state due to the fact of unloaded XDP
prog from interface.
Consider the scenario below:
// load xdp prog and xskmap and add entry to xskmap at idx 10
$ sudo ./xdpsock -i ens801f0 -t -q 10
// add entry to xskmap at idx 11
$ sudo ./xdpsock -i ens801f0 -t -q 11
terminate one of the processes and another one is unable to work due to
the fact that the XDP prog was unloaded from interface.
To address that, step away from setting bpf prog in favour of bpf_link.
This means that refcounting of BPF resources will be done automatically
by bpf_link itself.
Provide backward compatibility by checking if underlying system is
bpf_link capable. Do this by looking up/creating bpf_link on loopback
device. If it failed in any way, stick with netlink-based XDP prog.
therwise, use bpf_link-based logic.
When setting up BPF resources during xsk socket creation, check whether
bpf_link for a given ifindex already exists via set of calls to
bpf_link_get_next_id -> bpf_link_get_fd_by_id -> bpf_obj_get_info_by_fd
and comparing the ifindexes from bpf_link and xsk socket.
For case where resources exist but they are not AF_XDP related, bail out
and ask user to remove existing prog and then retry.
Lastly, do a bit of refactoring within __xsk_setup_xdp_prog and pull out
existing code branches based on prog_id value onto separate functions
that are responsible for resource initialization if prog_id was 0 and
for lookup existing resources for non-zero prog_id as that implies that
XDP program is present on the underlying net device. This in turn makes
it easier to follow, especially the teardown part of both branches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-7-maciej.fijalkowski@intel.com
Store offsets to each layer in a separate variables rather than compute
them every single time.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-6-maciej.fijalkowski@intel.com
For TEST_TYPE_STATS, worker_pkt_validate() that places frames onto
pkt_buf is not called. Therefore, when dump mode is set, don't call
worker_pkt_dump() for mentioned test type, so that it won't crash on
pkt_buf() access.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-2-maciej.fijalkowski@intel.com
The hisilicon-pcie.txt file is no longer useful since commit
c2fa6cf76d (PCI: dwc: hisi: Remove non-ECAM HiSilicon
hip05/hip06 driver), so delete it and remove related code in
MAINTAINERS file.
Suggested-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1617111799-109749-1-git-send-email-liudongdong3@huawei.com
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
The nvidia,tegra210-ahub binding is missing schema for child nodes. This
results in warnings if 'additionalProperties: false' is set (or when the
tools implement 'unevaluatedProperties' support). Add the child nodes
and reference their schema if one exists.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210326195003.3756394-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some OCaml developers reported that this bit of information is sometimes
useful for disambiguating functions for which the OCaml compiler assigns
the same name, e.g. nested or inlined functions.
Signed-off-by: Fabian Hemmer <copy@copy.sh>
Link: http://lore.kernel.org/lkml/20210226075223.p3s5oz4jbxwnqjtv@nyu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Having added the support for SCMI protocols as modules in order to let
vendors extend the SCMI core with their own additions it seems odd to
then force SCMI drivers built on top to use a static device table to
declare their devices since this way any new SCMI drivers addition
would need the core SCMI device table to be updated too.
Remove the static core device table and let SCMI drivers to simply declare
which device/protocol pair they need at initialization time: the core will
then take care to generate such devices dynamically during platform
initialization or at module loading time, as long as the requested
underlying protocol is defined in the devicetree.
Link: https://lore.kernel.org/r/20210316124903.35011-39-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Extend SCMI protocols accounting mechanism to address possible module
usage and add the support to possibly define new protocols as loadable
modules.
Keep the standard protocols built into the SCMI core.
Link: https://lore.kernel.org/r/20210316124903.35011-38-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Rename non devres managed notify_ops to use a naming pattern which exposes
the performed action verb as last token.
No functional change.
Link: https://lore.kernel.org/r/20210316124903.35011-37-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Notification private data is currently accessible via handle->notify_priv,
this data was indeed meant to be private to the notification core support
and not to be accessible by SCMI drivers. Make it private hiding it
inside instance descriptor struct scmi_info and accessible only via
dedicated helpers.
Link: https://lore.kernel.org/r/20210316124903.35011-36-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Remove all the events registration code used to ease the transition to the
new interface based on protocol handles.
Link: https://lore.kernel.org/r/20210316124903.35011-35-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Remove unused core scmi_xfer wrappers now that we have migrated all
protocols to the new interface based on protocol handles.
Link: https://lore.kernel.org/r/20210316124903.35011-34-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now that all protocols and drivers have been ported to the new interface
based on protocol handles and get/put operations, remove all the legacy
transient initialization code.
Link: https://lore.kernel.org/r/20210316124903.35011-33-cristian.marussi@arm.com
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>