Commit graph

1,013,453 commits

Author SHA1 Message Date
Eddie James
1d5d46a1ad ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
The si7021 was incorrectly placed at 0x20 on i2c bus 7. It is at 0x40.

Fixes: 9c44db7096 ("ARM: dts: aspeed: rainier: Add i2c devices")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16 12:22:36 +09:30
Eddie James
9a490b28dd ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
The second presence detection PCA9552 was incorrectly added to bus 9.

Fixes: 8be44de6f2 ("ARM: dts: aspeed: Rainier: Add presence GPIOs")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16 12:22:14 +09:30
Bart Van Assche
7a3beeae28 scsi: target: tcm_fc: Fix a kernel-doc header
Fix the function name in the kernel-doc header above ft_prli().

Link: https://lore.kernel.org/r/20210415220826.29438-21-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
baa75afde8 scsi: target: Shorten ALUA error messages
Do not print tg_pt_gp->tg_pt_gp_valid_id if we already know that it is zero.

Link: https://lore.kernel.org/r/20210415220826.29438-20-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
e15c745295 scsi: target: Fix two format specifiers
Use format specifier '%u' to format the u32 data type instead of '%hu'.

Link: https://lore.kernel.org/r/20210415220826.29438-19-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
15df85e0d6 scsi: target: Compare explicitly with SAM_STAT_GOOD
Instead of leaving it implicit that SAM_STAT_GOOD == 0, compare explicitly
with SAM_STAT_GOOD.

Link: https://lore.kernel.org/r/20210415220826.29438-18-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
41e70e3006 scsi: sd: Introduce a new local variable in sd_check_events()
Instead of using 'retval' to represent first a SCSI status and later
whether or not a disk change event occurred, introduce a new variable for
the latter purpose.

Link: https://lore.kernel.org/r/20210415220826.29438-17-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
22dc227e8f scsi: dc395x: Open-code status_byte(u8) calls
The dc395x driver is one of the two drivers that passes an u8 argument to
status_byte() instead of an s32 argument. Open-code status_byte() in
preparation of changing SCSI status values into a structure.

Link: https://lore.kernel.org/r/20210415220826.29438-16-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
3940ebf7ba scsi: 53c700: Open-code status_byte(u8) calls
The 53c700 driver is one of the two drivers that passes an u8 argument to
status_byte() instead of an s32 argument. Open-code status_byte in
preparation of changing SCSI status values into a structure.

Link: https://lore.kernel.org/r/20210415220826.29438-15-bvanassche@acm.org
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
c64aab41c5 scsi: smartpqi: Remove unused functions
This was detected by building the kernel with clang and W=1.

Link: https://lore.kernel.org/r/20210415220826.29438-14-bvanassche@acm.org
Cc: Don Brace <don.brace@microchip.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
11417cd5e2 scsi: qla4xxx: Remove an unused function
This was detected by building the kernel with clang and W=1.

Link: https://lore.kernel.org/r/20210415220826.29438-13-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
40d1373b60 scsi: myrs: Remove unused functions
This was detected by building the kernel with clang and W=1.

Link: https://lore.kernel.org/r/20210415220826.29438-12-bvanassche@acm.org
Cc: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:41 -04:00
Bart Van Assche
3690ad6708 scsi: myrb: Remove unused functions
This was detected by building the kernel with clang and W=1.

Link: https://lore.kernel.org/r/20210415220826.29438-11-bvanassche@acm.org
Cc: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
3ad0b1da0d scsi: mpt3sas: Fix two kernel-doc headers
Fix the following warnings:

drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'

Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org
Fixes: d6adc251dd ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Fixes: 7dd847dae1 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region")
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
be5aeee30e scsi: fcoe: Suppress a compiler warning
Suppress the following compiler warning:

warning: cast to smaller integer type
      'enum fip_mode' from 'void *' [-Wvoid-pointer-to-enum-cast]
        enum fip_mode fip_mode = (enum fip_mode)kp->arg;
                                 ^~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20210415220826.29438-9-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
90d6697810 scsi: libfc: Fix a format specifier
Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h,
use the %u format specifier instead of %hu. This patch fixes the following
clang compiler warning:

warning: format specifies type
      'unsigned short' but the argument has type 'u32' (aka 'unsigned int')
      [-Wformat]
                             "lport->mfs:%hu\n", mfs, lport->mfs);
                                         ~~~          ^~~~~~~~~~
                                         %u

Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
56853f0e61 scsi: aacraid: Remove an unused function
This was detected by building the kernel with clang and W=1.

Link: https://lore.kernel.org/r/20210415220826.29438-7-bvanassche@acm.org
Cc: aacraid@microsemi.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
b8e162f9e7 scsi: core: Introduce enum scsi_disposition
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.

The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:

KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/

Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
280e91b026 scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
The comment above scsi_send_eh_cmnd() says: "Returns SUCCESS or FAILED or
NEEDS_RETRY". This patch makes all values returned by scsi_send_eh_cmnd()
match the documentation of this function. This change does not affect the
behavior of scsi_eh_tur() nor of scsi_eh_try_stu() nor of the
scsi_request_sense() callers.

See also commit bbe9fb0d04 ("scsi: Avoid that .queuecommand() gets called
for a blocked SCSI device"; v5.3).

Link: https://lore.kernel.org/r/20210415220826.29438-5-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
0d2810cd62 scsi: core: Rename scsi_softirq_done() into scsi_complete()
Commit 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism";
v3.13) introduced a code path that calls the blk-mq completion function
from interrupt context. scsi-mq was introduced by commit d285203cf6
("scsi: add support for a blk-mq based I/O path."; v3.17).

Since the introduction of scsi-mq, scsi_softirq_done() can be called from
interrupt context. That made the name of the function misleading, rename it
to scsi_complete().

Link: https://lore.kernel.org/r/20210415220826.29438-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
886874af94 scsi: core: Remove an incorrect comment
scsi_device.sdev_target is used in more code than the single_lun code,
hence remove the comment next to the definition of the sdev_target member.

Link: https://lore.kernel.org/r/20210415220826.29438-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
76fc0df9a0 scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
The current scsi_alloc_sgtables() documentation does not accurately explain
what this function does. Hence improve the documentation of this function.

Link: https://lore.kernel.org/r/20210415220826.29438-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:39 -04:00
Al Viro
80e5d1ff5d useful constants: struct qstr for ".."
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-04-15 22:36:45 -04:00
Viswas G
1f02beff22 scsi: pm80xx: Remove global lock from outbound queue processing
Introduce spin lock for outbound queue. With this, driver need not acquire
HBA global lock for outbound queue processing.

Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:29:00 -04:00
Viswas G
b431472bc8 scsi: pm80xx: Reset PI and CI memory during re-initialization
Producer index(PI) outbound queue and consumer index(CI) for Outbound queue
are in DMA memory. During resume(), the stale PI and CI Values will lead to
unexpected behavior. These values should be reset to 0 during driver
reinitialization.

Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:29:00 -04:00
Ruksar Devadi
4f5deeb40f scsi: pm80xx: Completing pending I/O after fatal error
When controller runs into fatal error, I/Os get stuck with no response,
handler event is defined to complete the pending I/Os (SAS task and
internal task) and also perform the cleanup for the drives.

Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Vishakha Channapattan
b0c306e621 scsi: pm80xx: Add sysfs attribute to track iop1 count
A new sysfs variable 'ctl_iop1_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.

Using the 'ctl_iop1_count' sysfs variable we can see ticks incrementing:

    linux-9saw:~# cat  /sys/class/scsi_host/host*/ctl_iop1_count
    0x00000069
    0x0000006b
    0x0000006d
    0x00000072

Link: https://lore.kernel.org/r/20210415103352.3580-6-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Vishakha Channapattan
0602624ace scsi: pm80xx: Add sysfs attribute to track iop0 count
A new sysfs variable 'ctl_iop0_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.

Using the 'ctl_iop0_count' sysfs variable we can see ticks incrementing:

    linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop0_count
    0x000000a3
    0x000001db
    0x000001e4
    0x000001e7

Link: https://lore.kernel.org/r/20210415103352.3580-5-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Vishakha Channapattan
dd49ded8aa scsi: pm80xx: Add sysfs attribute to track RAAE count
A new sysfs variable 'ctl_raae_count' is being introduced that tells if the
controller is alive by indicating controller ticks. If on subsequent run we
see the ticks changing in RAAE count that indicates that controller is not
dead.

Using the 'ctl_raae_count' sysfs variable we can see ticks incrementing:

    linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_raae_count
    0x00002245
    0x00002253
    0x0000225e

Link: https://lore.kernel.org/r/20210415103352.3580-4-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Vishakha Channapattan
a4c55e16c5 scsi: pm80xx: Add sysfs attribute to check controller hmi error
A new sysfs variable 'ctl_hmi_error' is being introduced to give the error
details if the MPI initialization fails

Using the 'ctl_hmi_error' sysfs variable we can check the error details:

    linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_hmi_error
    0x00000000
    0x00000000
    0x00000000

Link: https://lore.kernel.org/r/20210415103352.3580-3-Viswas.G@microchip.com
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Vishakha Channapattan
4ddbea1b6f scsi: pm80xx: Add sysfs attribute to check MPI state
A new sysfs variable 'ctl_mpi_state' is being introduced to check the state
of MPI.

Using the 'ctl_mpi_state' sysfs variable we can check the MPI state:

    linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_mpi_state
    MPI is successfully initialized

Link: https://lore.kernel.org/r/20210415103352.3580-2-Viswas.G@microchip.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:28:59 -04:00
Ben Widawsky
b21bb4cd11 cxl/mem: Fix register block offset calculation
The "Register Offset Low" register of a "DVSEC Register Locator"
contains the 64K aligned offset for the registers along with the BAR
indicator and an id. The implementation was treating the "Register Block
Offset Low" field a value rather than as a pre-aligned component of the
64-bit offset. So, just mask, don't mask and shift (FIELD_GET).

The user visible result of this bug is that the driver fails to bind to
the device after none of the required blocks are found.

This was missed earlier because the primary development done in the QEMU
environment only uses 0 offsets, i.e. 0 shifted is still 0.

Fixes: 8adaf747c9 ("cxl/mem: Find device capabilities")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-15 19:27:54 -07:00
Julian Wiedmann
b3f0a1ee9e scsi: zfcp: Lift Request Queue tasklet & timer from qdio
The qdio layer currently provides its own infrastructure to scan for
Request Queue completions & to report them to the device driver.  This
comes with several drawbacks - having an async tasklet & timer construct in
qdio introduces additional lifetime complexity, and makes it harder to
integrate them with the rest of the device driver. The timeouts are also
currently hard-coded, and can't be tweaked without affecting other qdio
drivers (ie. qeth).

But due to recent enhancements to the qdio layer, zfcp can actually take
full control of the Request Queue completion processing. It merely needs to
opt-out from the qdio layer mechanisms by setting the scan_threshold to 0,
and then use qdio_inspect_queue() to scan for completions.

So re-implement the tasklet & timer mechanism in zfcp, while initially
copying the scan conditions from qdio's handle_outbound() and
qdio_outbound_tasklet(). One minor behavioural change is that
zfcp_qdio_send() will unconditionally reduce the timeout to 1 HZ, rather
than leaving it at 10 Hz if it was last armed by the tasklet. This just
makes things more consistent. Also note that we can drop a lot of the
accumulated cruft in qdio_outbound_tasklet(), as zfcp doesn't even use PCI
interrupt requests any longer.

This also slightly touches the Response Queue processing, as
qdio_get_next_buffers() will no longer implicitly scan for Request Queue
completions. So complete the migration to qdio_inspect_queue() here as well
and make the tasklet_schedule() visible.

Link: https://lore.kernel.org/r/018d3ddd029f8d6ac00cf4184880288c637c4fd1.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Qinglang Miao
be46e39ae3 scsi: zfcp: Move the position of put_device()
Place the put_device() call after device_unregister() in both
zfcp_unit_remove() and zfcp_sysfs_port_remove_store() to make it more
natural. put_device() ought to be the last time we touch the object in both
functions.

Add comments after put_device() to make code clearer.

Link: https://lore.kernel.org/r/0a568c7733ba0f1dde28b0c663b90270d44dd540.1618417667.git.bblock@linux.ibm.com
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Julian Wiedmann
20540a5645 scsi: zfcp: Clean up sysfs code for SFP diagnostics
The error path from zfcp_adapter_enqueue() no longer attempts to remove the
diagnostics attributes if they haven't been created yet.

So remove the manual 'sysfs_established' guard for this case, and use
device_add_groups() to add all adapter-related sysfs attributes in one go.

Link: https://lore.kernel.org/r/37a97537f675d643006271f37723c346189b6eec.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Julian Wiedmann
ab1fa88062 scsi: zfcp: Fix sysfs roll-back on error in zfcp_adapter_enqueue()
When zfcp_adapter_enqueue() fails to create the zfcp_sysfs_adapter_attrs
group, it calls zfcp_adapter_unregister() to tear down the adapter state
again. This then unconditionally attempts to remove the
zfcp_sysfs_adapter_attrs group, resulting in a "group not found" WARN from
sysfs code.

Avoid this by copying most of zfcp_adapter_unregister() into the error
path, allowing for more fine-granular roll-back. Then skip the sysfs
tear-down steps if we haven't progressed this far in the initialization.

Link: https://lore.kernel.org/r/790922cc3af075795fff9a4b787e6bda19bdb3be.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Yevhen Viktorov
8824db894d scsi: zfcp: Fix indentation coding style issue
Code indentation should use tabs where possible.

Link: https://lore.kernel.org/r/e8a15a2f3d64e2e76a214647cfd4fe23d370b165.1618417667.git.bblock@linux.ibm.com
Signed-off-by: Yevhen Viktorov <yevhen.viktorov@virginmedia.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Julian Wiedmann
91cf21ec6d scsi: zfcp: Remove unneeded INIT_LIST_HEAD() for FSF requests
INIT_LIST_HEAD() is only needed for actual list heads, while req->list is
used as a list entry.

Note that when the error path in zfcp_fsf_req_send() removes the request
from the adapter's list of pending requests, it actually looks up the
request from the zfcp_reqlist - rather than just calling list_del().  So
there's no risk of us calling list_del() on a request that hasn't been
added to any list yet.

Link: https://lore.kernel.org/r/254dc0ae28dccc43ab0b1079ef2c8dcb5fe1d2e4.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Jens Axboe
ea6a693d86 io_uring: disable multishot poll for double poll add cases
The re-add handling isn't correct for the multi wait case, so let's
just disable it for now explicitly until we can get that sorted out. This
just turns it into a one-shot request. Since we pass back whether or not
a poll request terminates in multishot mode on completion, this should
not break properly behaving applications that check for IORING_CQE_F_MORE
on completion.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-15 20:17:11 -06:00
Roman Bolshakov
f02d4086a8 scsi: qla2xxx: Reserve extra IRQ vectors
Commit a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of
CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs.

That breaks vector allocation assumptions in qla83xx_iospace_config(),
qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions
computes maximum number of qpairs as:

  ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default
                   response queue) - 1 (ATIO, in dual or pure target mode)

max_qpairs is set to zero in case of two CPUs and initiator mode. The
number is then used to allocate ha->queue_pair_map inside
qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is
left NULL but the driver thinks there are queue pairs available.

qla2xxx_queuecommand() tries to find a qpair in the map and crashes:

  if (ha->mqenable) {
          uint32_t tag;
          uint16_t hwq;
          struct qla_qpair *qpair = NULL;

          tag = blk_mq_unique_tag(cmd->request);
          hwq = blk_mq_unique_tag_to_hwq(tag);
          qpair = ha->queue_pair_map[hwq]; # <- HERE

          if (qpair)
                  return qla2xxx_mqueuecommand(host, cmd, qpair);
  }

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G        W         5.10.0-rc1+ #25
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc]
  RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx]
  Call Trace:
   scsi_queue_rq+0x58c/0xa60
   blk_mq_dispatch_rq_list+0x2b7/0x6f0
   ? __sbitmap_get_word+0x2a/0x80
   __blk_mq_sched_dispatch_requests+0xb8/0x170
   blk_mq_sched_dispatch_requests+0x2b/0x50
   __blk_mq_run_hw_queue+0x49/0xb0
   __blk_mq_delay_run_hw_queue+0xfb/0x150
   blk_mq_sched_insert_request+0xbe/0x110
   blk_execute_rq+0x45/0x70
   __scsi_execute+0x10e/0x250
   scsi_probe_and_add_lun+0x228/0xda0
   __scsi_scan_target+0xf4/0x620
   ? __pm_runtime_resume+0x4f/0x70
   scsi_scan_target+0x100/0x110
   fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc]
   process_one_work+0x1ea/0x3b0
   worker_thread+0x28/0x3b0
   ? process_one_work+0x3b0/0x3b0
   kthread+0x112/0x130
   ? kthread_park+0x80/0x80
   ret_from_fork+0x22/0x30

The driver should allocate enough vectors to provide every CPU it's own HW
queue and still handle reserved (MB, RSP, ATIO) interrupts.

The change fixes the crash on dual core VM and prevents unbalanced QP
allocation where nr_hw_queues is two less than the number of CPUs.

Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com
Fixes: a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs")
Cc: Daniel Wagner <daniel.wagner@suse.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com>
Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:06:03 -04:00
Don Brace
5cad5a5072 scsi: smartpqi: Fix device pointer variable reference static checker issue
Dan Carpenter found a possible NULL pointer dereference issue in function
pqi_sas_port_add_rphy():

   drivers/scsi/smartpqi/smartpqi_sas_transport.c:97
   pqi_sas_port_add_rphy() warn: variable dereferenced before
   check 'pqi_sas_port->device' (see line 95)

Correct issue by moving reference of pqi_sas_port->device after the check
for the device pointer being non-NULL.

Link: https://www.mail-archive.com/kbuild@lists.01.org/msg06329.html
Link: https://lore.kernel.org/r/161850493026.7302.10032784239320437353.stgit@brunhilda
Fixes: ec504b23df ("scsi: smartpqi: Add phy ID support for the physical drives")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:03:32 -04:00
Don Brace
667298ceaf scsi: smartpqi: Fix blocks_per_row static checker issue
Dan Carpenter found a possible divide by 0 issue in the smartpqi driver in
functions pci_get_aio_common_raid_map_values() and pqi_calc_aio_r5_or_r6().
The variable rmd->blocks_per_row is used as a divisor and could be 0.

       Using rmd->blocks_per_row as a divisor without checking
       it for 0 first.

Correct these possible divide by 0 conditions by insuring that
rmd->blocks_per_row is not zero before usage.  The check for non-0 was too
late to prevent a divide by 0 condition.  Add in a comment to explain why
the check for non-zero is necessary. If the member is 0, return
PQI_RAID_BYPASS_INELIGIBLE before any division is performed.

Link: https://lore.kernel.org/linux-scsi/YG%2F5kWHHAr7w5dU5@mwanda/
Link: https://lore.kernel.org/r/161850492435.7302.392780350442938047.stgit@brunhilda
Fixes: 6702d2c40f ("scsi: smartpqi: Add support for RAID5 and RAID6 writes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:03:32 -04:00
Al Viro
d692d397e8 hostfs_open(): don't open-code file_dentry()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-04-15 22:03:00 -04:00
David S. Miller
392c36e5be Merge branch 'ehtool-fec-stats'
Jakub Kicinski says:

====================
ethtool: add standard FEC statistics

This set adds uAPI for reporting standard FEC statistics, and
implements it in a handful of drivers.

The statistics are taken from the IEEE standard, with one
extra seemingly popular but not standard statistics added.

The implementation is similar to that of the pause frame
statistics, user requests the stats by setting a bit
(ETHTOOL_FLAG_STATS) in the common ethtool header of
ETHTOOL_MSG_FEC_GET.

Since standard defines the statistics per lane what's
reported is both total and per-lane counters:

 # ethtool -I --show-fec eth0
 FEC parameters for eth0:
 Configured FEC encodings: None
 Active FEC encoding: None
 Statistics:
  corrected_blocks: 256
    Lane 0: 255
    Lane 1: 1
  uncorrectable_blocks: 145
    Lane 0: 128
    Lane 1: 17

v2: check for errors in mlx5 register access
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:30 -07:00
Jakub Kicinski
1703bb50df mlx5: implement ethtool::get_fec_stats
Report corrected bits.

v2: catch reg access errors (Saeed)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00
Jakub Kicinski
cab351be53 sfc: ef10: implement ethtool::get_fec_stats
Report what appears to be the standard block counts:
 - 30.5.1.1.17 aFECCorrectedBlocks
 - 30.5.1.1.18 aFECUncorrectableBlocks

Don't report the per-lane symbol counts, if those really
count symbols they are not what the standard calls for
(even if symbols seem like the most useful thing to count.)

Fingers crossed that fec_corrected_errors is not in symbols.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00
Jakub Kicinski
c9ca5c3aab bnxt: implement ethtool::get_fec_stats
Report corrected bits.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00
Jakub Kicinski
be85dbfeb3 ethtool: add FEC statistics
Similarly to pause statistics add stats for FEC.

The IEEE standard mandates two sets of counters:
 - 30.5.1.1.17 aFECCorrectedBlocks
 - 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).

Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.

This set adds the 2 standard-based block counters and a extra
one for corrected bits.

Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.

Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00
Jakub Kicinski
3d7cc109ec ethtool: fec_prepare_data() - jump to error handling
Refactor fec_prepare_data() a little bit to skip the body
of the function and exit on error. Currently the code
depends on the fact that we only have one call which
may fail between ethnl_ops_begin() and ethnl_ops_complete()
and simply saves the error code. This will get hairy with
the stats also being queried.

No functional changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00
Jakub Kicinski
c5797f8a64 ethtool: move ethtool_stats_init
We'll need it for FEC stats as well.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15 17:08:29 -07:00